Fail and fix, DPS updater error U44M2I218
Many thanks to responses from Uwe Laubender, which brought understanding.
Here's the full thread with fix: http://forums.adobe.com/thread/1046154?tstart=0
Should be some info and flavor for DPS developers. I leave the response as it is, so you know it, but with understanding also.
Regards,
Clive
It will now play audio cds and dvds. The computer asks me what to do with them first. The problem is still the cd i use for study. Its is an interactive cd - it is its own application - clicking on images and animations to teach vowel sounds, sentences etc.
The disc works on my other laptop, which is running in windows 7. All discs are recognised by my windows 7 and 8.1 dvd/cd player/writer, but when the title page for the interactive cd pops up on windows 8.1, the director error message pops up and the homepage shuts down with the message.
I feel like Im sure there is a package or a patch I can download to fix this issue, I just need to know what. Please help.
Similar Messages
-
Failed to resume automatic updates error 0x8024afff
I am running SCCM 2012 R2 with only one primary site. Windows updates seem to synchronize ok and i can manually push out updates and they install correctly. My issue happens when i try to deployed Automatic Updates for the first time. When i check the
ruleengine.log on the site server. i see that the rule doesn't find a single update to install even when i pick very simple parameters for the ADR to pick up. When i look at the updatehandler.log on the client side all i get is "Failed to resume automatic
updates error 0x8024afff" and it is unable to resume. our site only has 150 devices including servers. I'm only trying to configure an ADR for workstations. I have WSUS installed locally on the SCCM server and I am using a Remote Distribution point on
a Windows Server 2012 R2. I haven't been able to find much on this error code other than "0x8024AFFF WU_E_AU_UNEXPECTED An Automatic
Updates error not covered by another WU_E_AU * code." and no forums have been very helpful. Any help would be appreciated thanks!Here's what i get in the ruleengine.log when i start an ADR. The parameters i have set have been simple. such as choosing "security" updates when there are a few security updates that are required. I have tried to choose almost every single category minus
products.
Found notification file D:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\6.RUL
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4324 (0x10E4)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
Refreshed ScheduleList instance for Rule (6) from schedule string (01317B0000100038) with next occurence (7/17/2014 9:00:00 AM)
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
FindNextEventTime found next event for RuleID 6 as :7/17/2014 9:00:00 AM
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
RuleEngine: Got next rule execution time successfully. Next event is in 22 minutes
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
Sleeping for 15 minutes SMS_RULE_ENGINE
7/17/2014 8:37:14 AM 4328 (0x10E8)
CRuleHandler: Need to Process 0 rules SMS_RULE_ENGINE
7/17/2014 8:37:14 AM 4324 (0x10E4)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
7/17/2014 8:37:14 AM 4324 (0x10E4)
Found notification file D:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\6.RUL
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
Constructing Rule 6 using Auto Deployment Rule Factory
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Populating Rule Skeleton SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Populating Criterion Skeleton
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Refreshed ScheduleList instance for Rule (6) from schedule string (01317B0000100038) with next occurence (7/17/2014 9:00:00 AM)
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
FindNextEventTime found next event for RuleID 6 as :7/17/2014 9:00:00 AM
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
RuleEngine: Got next rule execution time successfully. Next event is in 22 minutes
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
Sleeping for 15 minutes SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4328 (0x10E8)
Populating Action Skeleton SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Populating Action Skeleton SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: Need to Process 1 rules SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: Processing Rule with ID:6, Name:Server Updates.
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Evaluating Update Criteria for AutoDeployment Rule 6
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Evaluating Update Criteria... SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Rule Criteria is: <UpdateXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="SMS_SoftwareUpdate" LocaleId="1033"><UpdateXMLDescriptionItems><UpdateXMLDescriptionItem PropertyName="CustomSeverity"
UIPropertyName=""><MatchRules><string>'10'</string><string>'8'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="NumMissing" UIPropertyName=""><MatchRules><string>>=1</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem
PropertyName="Severity" UIPropertyName=""><MatchRules><string>'10'</string><string>'8'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="_UpdateClassification" UIPropertyName=""><MatchRules><string>'UpdateClassification:e6cf1350-c01b-414d-a61f-263d14d133b4'</string><string>'UpdateClassification:e0789628-ce08-4437-be74-2495b842f43b'</string><string>'UpdateClassification:b54e7d24-7add-428f-8b75-90a396fa584f'</string><string>'UpdateClassification:0fa1201d-4330-4fa8-8ae9-b877473b6441'</string><string>'UpdateClassification:68c5b0a3-d1a6-4553-ae49-01d3a7827828'</string><string>'UpdateClassification:28bc880e-0592-4cbf-8f95-c79b17911d5f'</string></MatchRules></UpdateXMLDescriptionItem></UpdateXMLDescriptionItems></UpdateXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:CustomSeverity, PropertyValue:'10'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:CustomSeverity, PropertyValue:'8'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:NumMissing, PropertyValue:>=1
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:Severity, PropertyValue:'10'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:Severity, PropertyValue:'8'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:e6cf1350-c01b-414d-a61f-263d14d133b4'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:e0789628-ce08-4437-be74-2495b842f43b'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:b54e7d24-7add-428f-8b75-90a396fa584f'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:0fa1201d-4330-4fa8-8ae9-b877473b6441'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:68c5b0a3-d1a6-4553-ae49-01d3a7827828'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:28bc880e-0592-4cbf-8f95-c79b17911d5f'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Query to run is: select CI_ID from dbo.fn_ListUpdateCIs(1033) ci~where IsExpired=0~ and (CustomSeverity in (N'10', N'8'))~ and (exists(select 1 from vSMS_UpdateComplianceSummary where CI_ID=ci.CI_ID and NumMissing>=1))~ and
(Severity in (N'10', N'8'))~ and (CI_ID in (select CI_ID from v_CICategories_All where CategoryInstance_UniqueID in (N'UpdateClassification:e6cf1350-c01b-414d-a61f-263d14d133b4', N'UpdateClassification:e0789628-ce08-4437-be74-2495b842f43b', N'UpdateClassification:b54e7d24-7add-428f-8b75-90a396fa584f',
N'UpdateClassification:0fa1201d-4330-4fa8-8ae9-b877473b6441', N'UpdateClassification:68c5b0a3-d1a6-4553-ae49-01d3a7827828', N'UpdateClassification:28bc880e-0592-4cbf-8f95-c79b17911d5f')))
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Rule resulted in a total of 0 updates
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Evaluation Resultant XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DefinitionUpdates/><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Enforcing Content Download Action SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Download Rule Action XML is: <ContentActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PackageID>CCC0001A</PackageID><ContentLocales><Locale>Locale:9</Locale><Locale>Locale:0</Locale></ContentLocales><ContentSources><Source
Name="Internet" Order="1"/><Source Name="WSUS" Order="2"/><Source Name="UNC" Order="3" Location=""/></ContentSources></ContentActionXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Criteria Filter Result XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DefinitionUpdates/><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
0 update(s) need to be downloaded in package "CCC0001A" (\\configserver\Source Files)
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
List of update(s) which match the content rule criteria = {}
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
No new update was added to the package. Package "CCC0001A" would not be updated.
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Download action completed for the AutoDeployment
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Enforcing Create Deployment Action SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>CCC00010</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>7</Duration><DurationUnits>Days</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>false</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>false</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>false</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>false</AllowInstallOutSW><EnableAlert>false</EnableAlert><AlertThresholdPercentage>0</AlertThresholdPercentage><AlertDuration>2</AlertDuration><AlertDurationUnits>Weeks</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplayAll</UserNotificationOption><LimitStateMessageVerbosity>true</LimitStateMessageVerbosity><StateMessageVerbosity>1</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>false</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Server Updates</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Server Updates</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Parsing Rule XML... SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Could not find element DeploymentId SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Could not find element UpdateGroupId SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Could not find element UpdateGroupName SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
CRuleHandler: Rule 6 Successfully Applied! SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Updated Success Information for Rule: 6 SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: Deleting Rule 6 SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Found notification file D:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\6.RUL
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4324 (0x10E4)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
CRuleHandler: Need to Process 0 rules SMS_RULE_ENGINE
7/17/2014 8:37:39 AM 4324 (0x10E4)
Refreshed ScheduleList instance for Rule (6) from schedule string (01317B0000100038) with next occurence (7/17/2014 9:00:00 AM)
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
7/17/2014 8:37:39 AM 4324 (0x10E4)
FindNextEventTime found next event for RuleID 6 as :7/17/2014 9:00:00 AM
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
RuleEngine: Got next rule execution time successfully. Next event is in 22 minutes
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
Sleeping for 15 minutes SMS_RULE_ENGINE
7/17/2014 8:37:39 AM 4328 (0x10E8) -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."
I'm still attempting to restore it, but the process goes as follows
- Extracting software.
- Waiting for iphone.
- Preparing iphone software for restore.
- Verifying iphone software.
- Restoring iPhone software.
It is at this point where it begins to load approxiamtely 10% and then freezes. I have had the handset connected 7 hours with no progress and this is my third attempt since Friday. Please help.See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743 -
my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
My ios 7 download appears to have worked, then it tries to validate, fails and says Software Update Unavailable - has happened 3 times so far
Thanks - I didn't realize there were separate validation servers. I've continued to try - 3 more failures - I will keep trying. The download worked in a timely manner so I thought I was "over the hump" :-)
-
iPad has blank screen. Screen froze and went blank. Have not been able to get any response. Forced in to recovery mode, but restore fails with a 1600 unknown error. Has anyone had any success in reviving an ipad in this state?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Message was edited by: Texas Mac Man -
Secure connection to iTunes store failed and could not update to ios 6
I tried in 4 different pcs with windows 7 installed to update my iphone 4 to latest version of ios (ios6) my current version is 5.1.1. I never had this issue ever before.. My iphone is jailbroken and so i couldnt update with OTA. I also tried to install a fresh copy of ios 5.1.1 to update my phone via OTA.. But the same problem now in itunes 10.5 and 10.7 too.. "iTunes could not connect to iphone software update server or is temporarily unavailable". I checked iTunes itunes diagnostics and the secure connection to itunes storo fail is the only thing which doesnt work.. I tried almost everything from here.. Starting from "internet option", changing the hosts file and the firewall thing.. But couldnt get it better.. What shoud i do?
Here is my iTunes diagnostics report:
Microsoft Windows 7 Ultimate Edition (Build 7600)
eMachines ET1861
iTunes 10.7.0.21
QuickTime 7.6.9
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0023AEC4028E1440
Current user is an administrator.
The current local date and time is 2012-09-23 09:00:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {A11C5D80-134D-4FA9-BF81-1C4A418C0F4A}
Description: Dhiraagu
IP Address: 10.151.15.47
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 05:00:00 1970
Lease Expires: Thu Jan 01 05:00:00 1970
DNS Servers: 27.114.138.4
27.114.140.62
Adapter Name: {1EAA0EEE-E778-4884-B030-1AFF603AEC57}
Description: Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 05:00:00 1970
Lease Expires: Thu Jan 01 05:00:00 1970
DNS Servers:
Active Connection: Dhiraagu
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2012-09-23 08:57:21.
PLEASE HELP ME...!!!Hi msahed,
Welcome to Apple Support Communities.
It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
iTunes: About the "A secure network connection could not be established" alert
http://support.apple.com/kb/ts1470
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
I hope this helps.
-Jason -
Adobe PDF 8.0 fails and so does updater in CS3
I'm just about out of ideas as to how to get CS3 to work correctly. Briefly, this is the story:
1. CS3 worked originally when I bought last year on a Mac Pro
2. In the last couple of months, the updater gave me a message that "The installation process encountered a problem...." CS3 still worked but I then noticed that the PDFmaker in Word or the Adobe PDF 8.0 print driver would not work: job would just queue and then disappear with no error message.
3. I figured something must be corrupted so today I ran the uninstaller for Acrobat and then the uninstaller for CS3. I then run the original CS3 installer disk and the program installed ok.
4. I then ran the updater and got the same message. The following components could not update:
Photoshop 10.0.1, Camera Raw 4.4.1 U, AIR update....S3 profess, Bridge CS3 2.1.1 Update, Start Meeting 10.1, Flash lite 3 Update for Device.., Asset Services 3.1.0 update, Illustrator CS3 13.0.1 update.
5. I still have the problem with the Adobe PDF 8.0 print driver not working (or PDFmaker).
6. Curiously, CS3 didn't ask me for my serial no. when I reinstalled so there must be a hidden file or files that did not get uninstalled.
7. Finally, IS THERE SOME WAY TO GET THIS TO WORK SHORT OF BUYING A NEW MAC or wiping the hard disk?
8. Running current version of OS 10.5.3
Thanks, I'm really not sure how to fix this and apparently one needs to pay for phone tech support?I was able to fix the Adobe PDF 8.0 printer driver by running the updater and ONLY updating acrobat to v8.1.2. Apparently, the updater wasn't working for this if I just ran the auto-update.
Other problem with updater failing is not fixed and others have reported previously. I deleted everything containing "Adobe" in the name (except fonts) in the libraries after uninstalling CS3. I will only run the updater when I need a specific update in the future since the "update all" option is not reliable.
Updater is rather disappointing since I have not had this kind of trouble with an Adobe product in the past. -
I have Acrobat 10 (10.1.9) that came in the Creative Suite CS5. I have received numerous messages about failed updates so finally did what was recommended by Adobe and uninstalled the program. Now I can't re-install it. These are the error messages I get. Help!
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW065, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW065: Display requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failedI did it through CS, I think. I used the installation disk and selected Acrobat. It loads and then gives me all kinds of error messages and then uninstalls itself.
-
Windows 8 fails to install EVERY update, error code 0x800f0922
So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!I did that and it told me it succeeded, but I also tried to manually install net framework with DISM but gave me the same error.. And I reinstalled Windows trying the repair, refresh and reset options, nothing helped. I did not yet tried a clean installation.
CBS Log:
https://www.dropbox.com/s/qgzhhmlr0nqd7es/CBS.log
Windows Update Log:
https://www.dropbox.com/s/hpakr5t2290pbpy/WindowsUpdate.log
If the links dont work, try these:
CBS Log:
https://paste.ee/p/6aALS
Windows Update Log:
https://paste.ee/p/KzbIq -
Here is what I am running:
Microsoft Windows 7, Service Pack 1, Fully updated to 4/10/2012
Fresh Install of Firefox 11. No add-ons enabled as a result of troubleshooting.
I am a user with administrator rights
UAS is disabled.
To begin, this has been going on Since Firefox 10 or so. A few months now.
I am able to open Firefox. My add-ons worked (ABP, Flashblock, ABP Element Hiding Helper, IETAB2, Downthemall, Greasemonkey, 4chan extension) had no problems. Firefox is set and has been set for the last two years as my default web browser.
However Since approximately Firefox 10 or so, maybe before that, If I have a Firefox session open, and any other application attempts to open a session in a new window, I get the Firefox is already running, but not responding error."
I attempted to follow troubleshooting advice already posted (look for parent.lock files left behind [none present], multiple sessionstore.js files [none present], create a new user profile, attempted to clear out the "read-only" permission in windows 7, however as soon as it is cleared, the read only permission returns.)
As a last resort, I deleted the Firefox folder, the %APPDATA%/Mozilla directory in its entirety, then utilized CCleaner to remove any and all references to Firefox in the windows registry, then did a full re-install, no extensions installed right now.
I checked preferences and have the option "open new windows in a new tab" checked off. The problem persists regardless if this option is checked on or off. This problem persists in or out of safe mode, even with the brand new install.
Test Cases:
All cases:
Firefox is selected as the default browser for windows 7
Case 1: Open a firefox session. Utilize any other program that attempts to open a link to their website in a new browser window or new browser session. Experience "Firefox is already running" error
Case 2: Open a firefox session. Right click on Firefox on the task bar. Select "open in new window". Experience "Firefox is already running" error
Case 3: Open a firefox session. Select the Firefox Menu > New tab > New Window. A new window will actually open.
This is the only method of opening a new window in the same browser session or profile that actually works on my system. Attempting to open a browser session from the task bar "open new window dialog" or opening a new window while a current window/session is running will not open firefox in a new window or a new tab in the current session. The "Firefox is already running, but is not responding" error will occur every time.Cor-el's suggestion resolved my problem. Apparently the MOZ_NO_REMOTE variable was set to 1 on my system variables. I never made it, and really have no idea how it got there, but deleting this variable and restarting firefox has resolved the issue. Thanks Cor-el!
Marking case: Solved
Solution: Verify the MOZ_NO_REMOTE variable is NOT set to 1. This can be achieved by simply deleting this variable. -
I-Tunes upgrade failed and has given me errors.
Yesterday I attempted to upgrade I-tunes when prompted however the upgrade was unsuccessful and has caused errors. Today when I booted up my computer I got runtime errors and was unable to open I-tunes as a .dll file was missing. The error message recommended downloading i-tunes again so a uninstalled I-Tunes and then tried to download again but I get this message. "Service "Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services" If I ignore the message it just keeps coming back to I have to Abort. I now have no I-tunes. Any help you can give me would be greatly appreciated.
Hello there, klittee.
In some cases it's necessary to remove all traces of iTunes software. This has to be performed in a very specific fashion. The following Knowledge Base article outlines those steps:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, this article provides some additional steps to try:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How do i fix an updating error code A12E1?
continue to get an error code A12E1 when i try to update my Creative Cloud apps. how do i fix this?
SEMJay this topic has been discussed at http://forums.adobe.com/message/5600811#5600811.
-
My Creative Cloud Download keeps failing, and it give me error code: 205.
I'm on Windows 8.1 pro and I cannot figure out why it won't work, anyone had this problem? Got a solution?
78578765876356fgdfg Error 205 indicates a failure of the download. You can find more details and steps on how to resolve the error at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
Maybe you are looking for
-
Correct Approach in uploading a file
Which is the correct approach in uploading an image file. Upload the file to the ApplicationServer and save the path in the DataBase OR Upload the file to the DataBase as BLOB.
-
Error in deploying BPEL project from Jdeveloper
Hi all, I am using Jdeveloper 10.1.3.4.0. For the first time BPEL project deployed successfully, but when i am trying to deploy second time it's giving the below error. BUILD FAILED D:\jdevstudio10134\jdev\mywork\AIA_POC_Application\AIABPELProcess1\b
-
Photoshop touch will not open, iphone 5
It's stuck at the launch screen. recently deleted all my photos to fill up space. photoshop touch still will not open. Tried restarting the phone to no avail. If I delete and reinstall I lose all my files. Please help.
-
Regarding invoice posting through IDOC
Hi , I have created an interface to create invoice data thru INVOIC idoc which is in EDI810 Format, It is working fine but for payment ref field for vendor line item is not updating for all the line items , it is only updating for lost line item .Pl
-
Hi Experts, I have a multiprovider build on a DSO. My query is build on the multiprovider. Query requirement - to see the customers having no work excluding the date range provided by the user. I have 2 variables: A & B. This works as explained below