Fail in prerequistite check when install oracle 11g release 2 on desktop

all check is fail, but I am sure my PC have enough RAM.
the detail said
PRVF-7531: Physical memory check cannot be peformed on node "kei"
-Cause: could not perform check of physical memory on the node indicagted.
-Action: Ensure ability to access the node specified and view memory information
what does this mean? I already log in my PC with admin right.
Edited by: user10064903 on Apr 29, 2012 1:40 AM

user10064903 wrote:
all check is fail, but I am sure my PC have enough RAM.
the detail said
PRVF-7531: Physical memory check cannot be peformed on node "kei"
-Cause: could not perform check of physical memory on the node indicagted.
-Action: Ensure ability to access the node specified and view memory information
what does this mean? I already log in my PC with admin right.
Edited by: user10064903 on Apr 29, 2012 1:40 AMWhen all else fails Read The Fine Manual
INSTALLATION GUIDE
which can be found at URL below
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=

Similar Messages

Problem when installing Oracle 11g R2 x64 on rhel 5.8 x86_64

Hi All,
I’m trying to install oracle 11g software only to upgrade my database from 10g to 11g and i install all required packages listed in installation prerequisites but the below error appeared
error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
$tail -15 $ORACLE_HOME/install/make.log
/oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' make -f /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk relink_exe EXENAME=nmo make[1]: Entering directory `/oradata/db/tech_st/11.2.0/sysman/lib' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:113: warning: overriding commands for target `nmosudo' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' gcc -o /oradata/db/tech_st/11.2.0/sysman/lib/nmo -L/oradata/db/tech_st/11.2.0/lib/ -L/oradata/db/tech_st/11.2.0/sysman/lib/ `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -lm `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm -L/oradata/db/tech_st/11.2.0/lib /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o /oradata/db/tech_st/11.2.0/sysman/lib/libnmo.a -lcrypt -ldl `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm /bin/sh: cat: command not found /bin/sh: cat: command not found /bin/sh: cat: command not found /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o: In function `main': s0nmo.c:(.text+0x1b): undefined reference to `__intel_new_proc_init' make[1]: Leaving directory `/oradata/db/tech_st/11.2.0/sysman/lib' collect2: ld returned 1 exit status make[1]: *** [/oradata/db/tech_st/11.2.0/sysman/lib/nmo] Error 1 make: *** [nmo] Error 2 EBS :12.0.4
Please help me in this issue. Thanks in advance

Seems you are trying to Install 32-bit 11g R2 on Linux RHEL 5 (64-bit) server fails with relinking errors - 'Mkldflags ntcontab.o nnfgt.o'
Please check following MOS Notes.
Install/Clone 32-bit 11GR2 Client On Linux x86_64 Fails With Error In Invoking Target 'Mkldflags ntcontab.o nnfgt.o' Of Makefile ins_net_client.mk (Doc ID 1473421.1)

Unable to install Oracle 11g Release 2 in windows 7 64 bit OS

Hi,
Am trying to install the oracle 11g Release 2 database on my Laptop,
I have downloaded the two zip files from Oracle Site
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
After downloading I have unzipped started process, but after some process, am getting an error mentioning that, am missing a file in the below location
C:\$Oracle_BASE$\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications
but my unzip is successful for both the files, Please let me know why am getting this error when I have downloaded the files from Oracle site, Please let me know if I need to have
any additional s/w installed on my machine before running the Oracle database installation
Thanks

973946 wrote:
Thanks Srini,
After checking the link, I was able to install it but there were some error messages.
I have another problem log in the SQL PLUS. When I open the SQL PLUS window, it asked for Username and after I typed "sys" or "system" and hit Enter; it was prompted for password, however, it did not let me type in any word; and after I hit Enter again, the error message " ORA-12560: TNS:protocol adapter error" appeared
Any hints would be apprecieted, thanks.
SamIt wasn't preventing you from typing a password, it just wasn't echoing your keystrokes back to the screen. This is a security security feature common to most software, not just oracle. Either when asking for a password, either echo back a 'masking' character like '*' or don't echo anything. It's so common, I'm surprised you seem to have never seen it before.
So after entering your password ... the 12560 probably comes from
1- the fact you didn't have the environment variable ORACLE_SID set, so sqlplus didn' know the name of the instance/process you wanted to connect to, or
2 - the windows service for the database was not started.
Those two possibilities account for 99.99999 pct of ora-12560 on Windows installations.
Edited by: EdStevens on Nov 29, 2012 6:41 PM

Error when installing Oracle 11g

Hi,
I downloaded Oracle 11g last week, which is in two zip files. I extracted the files into the same folder as per instructions. The problem is that when I tried to install I got error "Could not find main class. program will now exit"
I am installing on windows 7 ultimate.
Please help

You should download the installer again and verify the download file size with the figure given on website.
Once you verify the file size unzip them and try running installer..
it seems the current installer you are using is corrupted.
Also before you download the installer make sure it is available for windows 7 ultimate!!!!

Problem Installing Oracle 11g. Please Help!

Hello All,
I need to install Oracle 11g Release 2 database on my machine:
Windows 7 Enterprise
64 bit Operating System
Service Pack 1
I ran into problems right before I reach the Installation Options Screen
The error message is:
Unable to establish a network connection to proxy server. Specify the correct proxy details.
I have tried entering the correct Proxy server information but it gives me the same error.
Please Help
Thanks

HI,
If you are not using proxy or if you want to continue without connecting to internet, you can just continue without providing these details
Regards
Yoonas

IOException2 when installing Oracle 9iR2 on Redhat 9

I have problem when installing Oracle 9i release 2 on Redhat 9. When on Disk 2 of oracle, oracle installer hangs and got this message :
I try to translate from French :
The message is pasted from file :installActions*.log
Exception due by action : copyGroupFromJar
Exceotion name : IOException2
Exception string : Error when writing in file :/usr/oracle/produit/920/demo/schema/sales_history/sh_sales.dat
exception level : 2
--

FOR ALL OF YOU GUYS trying to install Oracle 9i R2 on Red Hat 9, PLEASE VISIT THIS LINK - http://www.puschitz.com/InstallingOracle9i.shtml
It has comprehensive instructions on how to install Oracle (various releases,up to 9i Realease 2 on Linux). It takes a bit of effort, but you'll be smiling at the end!

Problem in opening editor in Oracle 11g release 2

Hii all
I have Install Oracle 11g release 2 on my 32 bit windows OS.
But I am having Little problem while opening editor
1) when ever i am typing ed in sql prompt I am having error
   Cannot create save file "afiedt.buf"
   How ever i have tried with the define editor command
   ie define_editor="Notepad"; the command is executing successfully but still i am having same error while typing ed
2)My second problem is i am not able to select anything for copy and paste even
   right mouse click button is also not working for paste
Please Suggest any solution soon...........

Thank Mr.Sharma
sir i have one more doubt
suppose my select statement is resulting some 4000 rows but i am only able to see the last
2500 to 4000 rows by scrolling up and down after the select has been made. I am facing this problem in 11g r2 only.
In 10g there was no such problem
so i want to know how to increase the size of sqlplus prompt so that i could see the entire
selected rows by scrolling up and down
Please reply sir..................
Thank You

Oracle 11g Release 2 "error in moving file"

Hi there, right now I'm trying to install Oracle 11g release 2 64-bit on Windows 7 64 bit. about half-way through the installation i get an error message:
"error in moving file C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll to C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll.dbl"
what's going on and how do i fix it?

1010200 wrote:
Dear Team,
we are getting error while installing RAT( workload features)
Neither D:\oracle\app\product\11gRel2/bin/orarat11.dll.dbl nor D:\oracle\app\product\11gRel2/bin/orarat11.dll exist.
Therefore, the ORACLE_HOME is in an invalid state with respect to the option '
Please suggest :I suggest that instead of hijacking a two year old thread that is only tangentially related to your problem, that you start your own thread with as many of your specific details as you can muster.

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

Installing Oracle 11g R2 on RHEL 5.9 server

Hi,
    I've been trying to install Oracle 11g R2 on a Red Hat Enterprise Linux 5.9 server but have not succeeded thus far. The server meets all the software and hardware requirements for Oracle 11g Release 2 and when it also has all the prerequisite packages/ RPM's on it, when checked manually. I have set up the various kernel, semaphore and local port range parameters in accordance with the Oracle guides for installing Oracle on RHEL 5. I also followed the online guides to create the "oracle" user and set up the groups (oinstall, dba, oper and asm).
    However, when I run the installer, it shows "Failed" for all the prerequisite checks. I tried to ignore this and install Oracle but it failed at 37% and gave multiple errors, related to invoking target 'XYZ' of different files including makefile and gcc.
     I suspect that either the installer is unable to detect these packages as they already exist on our server or it is something to do around permissions to the groups. I read on these forums that it might be because of a "cvu" folder created inside /tmp that requires '777' permission but am not sure if that's what's causing our installation to fail.
     Please let me know how to proceed with the installation and guide me through this.
Thanks.

Hi, its Oracle 11g R2 - 2.0.3.6 .
The O.S is Linux x86_64
server: RHEL 5.9 (Takinga) with kernel: 2.6.18
I've been working on this all day today and have managed to overcome the errors regarding the missing/ failed packages. I've also verified that my kernel parameters are correct; I had missed the kernel shmmni parameter yesterday.
The installer now detects all the packages & runs till 86% when it gives the error: "error invoking target client_sharedlib of makefile".
Kindly let me know how to proceed. Thanks in advance !

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Display Error while installing Oracle 11g R2 in RHEL 5 !!!

hi
I am trying to install Oracle 11g R2 in RHEL 5. When i run ./runInstaller it didnt pass one checking..which showed an error:
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
i run xhost +
it showed:
[oracle@localhost database]$ xhost +
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
xhost: unable to open display ":0.0"
i exported the DISPLAY too..its workedd..but still its showing the same error..
here iam trying to install the oracle 11g on RHEL 5 in a common PC...not using any Vmware or Virtual box and not trying to install it from remote PC. But still iam facing the same error.
Kindly help me to resolve this issue.
Shiyas M

Hi;
Firstly you are working on server or you use some telnet program like putty? If you are working on server than issue is:
as root
xhost +
than run xlock and be sure u can see clock
than su - oracle
xhost + once more than try to run ./runInstaller
If you connect server remotly than i use vncwier
1. as root run export DISPLAY=hostname or IP:1.0
2. xhost +
3. run xclock and see u see it on vncviwer
4. su - oracle
5. run export DISPLAY again
6. xhost
7. /runInstaller
Regard
Helios

How to install Oracle 11g on linux from VNC

Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
BTW, when I click on "Start TightVNC service" from Start button, I got "Failed to start TightVNC service for the following reason: Access is denied(error code 5).
The VNC on the linux server is running.
Thankyou.
Edited by: 907485 on Mar 21, 2012 7:21 AM

907485 wrote:
Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
Thankyou.we only know what you post.
where does linux reside?
where is VNC installed?

Installing Oracle 11g on Ubuntu 8.04

Hello,
I am having a sleepless night trying to install Oracle 11g express on Ubuntu 8.04.
There is no server. I am actually trying to install on the exact box i am using.
I got this error again and again. Any pro and experts please help:
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
=======================
oracle@sithkong-desktop:~/database$ DISPLAY=127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ export DISPLAY
oracle@sithkong-desktop:~/database$ xclock
No protocol specified
Error: Can't open display: 127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 10751 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1915 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-29_10-22-59PM. Please wait ...oracle@sithkong-desktop:~/database$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
No protocol specified
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'

http://www.pythian.com/news/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
HTH...

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Fail in prerequistite check when install oracle 11g release 2 on desktop

Similar Messages

Maybe you are looking for