Fail in Time and Date Update
Hello,
I use Compaq Presario CQ2200IX Desktop Pc for past 3 years....
Problem:
Recently i discovered that my pc has wrong date and time...whenever i switch on my pc everytime i have to change my date and time from settings...
Suggest me the solution for this issue...
Hi,
You're welcome
If you set the correct date and time in the bios menu, then load into Windows, does the time then look correct?
If it does, restart the PC and see if it still looks Ok. If it doesn't, check the bios menu again - if the time is also incorrect again, you probably will need to replace the RTC ( cmos ) battery.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
Nokia 6151 time and date problem
Recently I have reset my phone to Factory Setting, due to some problem that I'm having with my phone. Now, after resetting my phone to the factory setting, each time I off my phone (without removing the battery) and on it after that, I will have to update my phone date and time which before this I did not have to do that. Before i did the resetting,my phone will just on and no need fop me to do the time and date updating. If you ask me to on the auto update time,my service provider doesn't support this...how to set it back to its original state before i did the reset factory setting.
This is usually a symptom of a faulty auxilliary battery. The auxilliary is a small battery inside the phone and not the normal battery and can only be replaced by a Nokia Care Point. It should be replaced under warranty if your phone is still under warranty.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair. -
Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.
Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes. -
In my Lumia 625 auto update of time and date is not working properly. It's sowing different form my time zone. Anybody pls help me
Which network operator do you use, in which country?
-
Update time and date with server time..?
Hi.. All
every login ,flash get server time from php. how can i update time and date in flash..?I'm going to only show the month example, the rest is fairly straightforward:
<?php $month = date('n'); ?>
var date:Date = new Date();
trace(date);
date.setMonth($month);
trace(date); -
When I get a notice to update an app from Apple I am told that the connection cannot be made. Update your time and date. What does this mean other than my ipod clock?
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Time and date showing wrong time when set on auto since 4.1 update
hi since i updated my 3gs to 4.1 my time and date have changed by about 1 and a half hours and afew days before. i can change it manually but i dont understand why this has happened. has this happened to anyone else?
can anyone help? or am i just best to wait till the next update?Me too.
Second time I've been late to work in two weeks thanks to Apple ** programming!
First time when I upgraded to 4.1 and the alarms stopped working if they were set to go off every working day.
Then again today when the time unaccountably rolled back to be Sunday the 7th at 5am instead of WEdnesday 10th at 9am. Waiting for the day I'm out of contract on this rubbish so I can switch to a phone with a decent OS!
Message was edited by: twixPanther -
I have updated my iPad mini to iOS 7.1.1 recently. After updated, it went wrong with time and date even I tried to restart it or set manual time/date or set auto time/date. How can I solve this problem?
Hello Phirum OL,
Here is an article that will help you adjust the date and time settings on your iPad:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Learn the steps to take if your device has any of the following issues with the date and time.
Incorrect date or time
Wrong time zone being set automatically
Issues related to automatically switching with daylight savings time
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
My time and date is stuck but the current time is overlapping the old date. I tried turning it off:(
For how long? The update process takes time.
-
Can we display Cube update time and date
Hi All,
can we display Cube refresh time and date for user with out going into the Cube properties. Can we use any substitution variable for that?
Another doubt----
Will there be any systen defined default substitution variable in Essbase or anly user defined variables. IF there what are they and purpose of it?
RegardsAfter the successful cube building, you can capture the time stamp from the system into a variable and you can set the note on database.
suppose below is the maxl script updatetime.mxl
login $1 identified by $2 on $3 ;
spool on to $4 ;
alter database $5.$6 set note $7 ;
logout ;
spool off ;
exit ;
you can call the script like
essmsh updatetime.mxl <<userid>> <<pwd>> <<server>> <<spoolfile>> <<appname>> <<dbname>> <<updatetime>> -
HT4623 ios7.0.6 fails every time trying to update now what?
ios7.0.6 fails every time trying to update now what?
Are you updating over wi-fi, or cellular data? Or through iTunes. If you get the mesaage that the update is not available . Make sure you have the correct date and time on you phone. then try again.
-
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.
I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.
-
I am unable to open PDF files or run adobe flash when its needed I have downloaded it several times and tried updating it. NEED HELP
Adobe Acrobat NPAPI Plug-in, Version 11.0.04
Adobe® Acrobat® Plug-in for Web Browsers, Version 11.0.04 — from file “AdobePDFViewerNPAPI.plugin”.
application/pdf
Acrobat Portable Document Format
pdf
application/vnd.adobe.pdf
Acrobat Portable Document Format (Interim)
pdf
application/vnd.adobe.pdfxml
Acrobat XML Portable Document Format
pdfxml
application/vnd.adobe.x-mars
Acrobat XML Portable Document Format (Interim)
mars
application/vnd.adobe.xdp+xml
XML Data Package
xdp
application/vnd.adobe.xfd+xml
FormFlow99 Data File
xfd
application/vnd.adobe.xfdf
Acrobat Forms Data Format in XML
xfdf
application/vnd.fdf
Acrobat Forms Data Format
fdf
doubleTwist Web Plugin
doubleTwist Web Plugin — from file “doubleTwistWebPlugin.bundle”.
application/x-vnd-doubletwist
doubleTwist Web Plugin
Java Applet Plug-in
Displays Java applet content, or a placeholder if Java is not installed. — from file “JavaAppletPlugin.plugin”.
application/x-java-applet
Basic Java Applets
javaapplet
application/x-java-applet;deploy=10.25.2
Java applet
application/x-java-applet;javafx=2.2.25
Java applet
application/x-java-applet;jpi-version=1.7.0_25
Java applet
application/x-java-applet;version=1.1
Java applet
application/x-java-applet;version=1.1.1
Java applet
application/x-java-applet;version=1.1.2
Java applet
application/x-java-applet;version=1.1.3
Java applet
application/x-java-applet;version=1.2
Java applet
application/x-java-applet;version=1.2.1
Java applet
application/x-java-applet;version=1.2.2
Java applet
application/x-java-applet;version=1.3
Java applet
application/x-java-applet;version=1.3.1
Java applet
application/x-java-applet;version=1.4
Java applet
application/x-java-applet;version=1.4.1
Java applet
application/x-java-applet;version=1.4.2
Java applet
application/x-java-applet;version=1.5
Java applet
application/x-java-applet;version=1.6
Java applet
application/x-java-applet;version=1.7
Java applet
application/x-java-vm
Java applet
application/x-java-vm-npruntime
Java applet
QuickTime Plug-in 7.7.1
The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.plugin”.
application/sdp
SDP stream descriptor
sdp
application/x-mpeg
AMC media
amc
application/x-rtsp
RTSP stream descriptor
rtsp,rts
application/x-sdp
SDP stream descriptor
sdp
audio/3gpp
3GPP media
3gp,3gpp
audio/3gpp2
3GPP2 media
3g2,3gp2
audio/aac
AAC audio
aac,adts
audio/ac3
AC3 audio
ac3
audio/aiff
AIFF audio
aiff,aif,aifc,cdda
audio/amr
AMR audio
amr
audio/basic
uLaw/AU audio
au,snd,ulw
audio/mid
MIDI
mid,midi,smf,kar
audio/midi
MIDI
mid,midi,smf,kar
audio/mp3
MP3 audio
mp3,swa
audio/mp4
MPEG-4 media
mp4
audio/mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/mpeg3
MP3 audio
mp3,swa
audio/vnd.qcelp
QUALCOMM PureVoice audio
qcp,qcp
audio/wav
WAVE audio
wav,bwf
audio/x-aac
AAC audio
aac,adts
audio/x-ac3
AC3 audio
ac3
audio/x-aiff
AIFF audio
aiff,aif,aifc,cdda
audio/x-caf
CAF audio
caf
audio/x-gsm
GSM audio
gsm
audio/x-m4a
AAC audio
m4a
audio/x-m4b
AAC audio book
m4b
audio/x-m4p
AAC audio (protected)
m4p
audio/x-midi
MIDI
mid,midi,smf,kar
audio/x-mp3
MP3 audio
mp3,swa
audio/x-mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-mpeg3
MP3 audio
mp3,swa
audio/x-wav
WAVE audio
wav,bwf
image/jp2
JPEG2000 image
jp2
image/jpeg2000
JPEG2000 image
jp2
image/jpeg2000-image
JPEG2000 image
jp2
image/pict
PICT image
pict,pic,pct
image/png
PNG image
png
image/tiff
TIFF image
tif,tiff
image/x-bmp
BMP image
bmp,dib
image/x-jpeg2000-image
JPEG2000 image
jp2
image/x-macpaint
MacPaint image
pntg,pnt,mac
image/x-pict
PICT image
pict,pic,pct
image/x-png
PNG image
png
image/x-quicktime
QuickTime image
qtif,qti
image/x-sgi
SGI image
sgi,rgb
image/x-targa
TGA image
targa,tga
image/x-tiff
TIFF image
tif,tiff
video/3gpp
3GPP media
3gp,3gpp
video/3gpp2
3GPP2 media
3g2,3gp2
video/avi
Video For Windows (AVI)
avi,vfw
video/flc
AutoDesk Animator (FLC)
flc,fli,cel
video/mp4
MPEG-4 media
mp4
video/mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/msvideo
Video For Windows (AVI)
avi,vfw
video/quicktime
QuickTime Movie
mov,qt,mqv
video/sd-video
SD video
sdv
video/x-m4v
Video (protected)
m4v
video/x-mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/x-msvideo
Video For Windows (AVI)
avi,vfw
SharePoint Browser Plug-in
Microsoft Office for Mac SharePoint Browser Plug-in — from file “SharePointBrowserPlugin.plugin”.
application/x-sharepoint
Microsoft Office for Mac SharePoint Browser Plug-in
Shockwave Flash
Shockwave Flash 11.9 r900 — from file “Flash Player.plugin”.
application/futuresplash
FutureSplash Player
spl
application/x-shockwave-flash
Shockwave Flash
swf
Silverlight Plug-In
5.1.20913.0 — from file “Silverlight.plugin”.
application/x-silverlight -
Time and date settings change when phone is powered down (not shut off)..
I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/
-
Hi to all.
Does anybody know how to save your cmos settings to a floppy or CD?
Is there a program that can assist with saving the cmos settings to floppy or CD?
Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD?
I really don't want to go into the BIOS and write down all that info.
I have an HP Pavilion 553w that is 7 1/2 years old, running windows xp home edition version 2002 sp3, 2 gbs of ram, AMD athlon(tm)XP 2100+ 1.73 GHZ, bios version/date Phoenix Techologies, LTD AM35308, 10/07/2002 (Phoenix-AwardBIOS CMOS Setup Utility) SMBIOS 2.3, BIOS Core Version V6.0, BIOS Revision 3.08 10/7/2002.
I know my computer is ancient and I probably should have updated my BIOS, as it is out of date.
Also, after starting up my computer I noticed my time and date is not correct and as of lately have to adjust the time and date to the correct time and date.
I did some research and came across some possible reasons:
1. RTC battery (CMOS battery) may need reseating on motherboard.
2. The battery has become corrupt.
3. BIOS version may be out of date.
My computer is really taking longer than usual to startup and images of icons take longer to display, which may be a sign of the symptoms I listed above.
My computer doesn't have any malware whatsoever, clean as can be.
Any help or advise will be truly appreciated.
Jboman
This question was solved.
View Solution.Jboman,
There is not need to save CMOS settings unless you changed the default BIOS settings. A bad CMOS battery will not preserve the settings.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Maybe you are looking for
-
When turned on says Accessorize Test and is locked. How can I unlock and use it?
when I turned my 30gb ipod on it says accessorize Test and is locked on this screen. Any suggestions?
-
How do I set up my finger print scan it keeps showing me failed try again
how do i fi I set up my finger print scan for my iPhone 5s it keeps showing me failed and I have already updated my device I need help I called apple but before they can do anything for me the call Cuts off saying there's a limited time for the call
-
Configuring non-BT provided Powerline Adapters
I recently installed BT Vision+. The package came with a BT HomeHub2 router and two COMTREND PG9020 powerline adapters. I chose to replace my Netgear 802.11n router with the BT Home Hub2 - and it all works fine. To my original Netgear router i had
-
Exporting MPEG2's????
I am using an uncompressed quicktime graphic within final cut that I have to take into dvd studio pro to create a dvd. When I export an mpeg2 and burn my dvd the graphic seems to look like I have lost Alot of contrast. The quality has been greatly lo
-
Hi I'm loading data from an XML file with html specific tags so I can put all the formatting of the text field in the XML file, my XML looks something like this: <?xml version="1.0" encoding="utf-8"?> <screen> <text> <english> <p>96% of CEOs believe