Fail Messages and Slow System

I was working with adjusting audio in my 62 slide presentation, off the local server, had been clearing the cache, and saving as I went.  After two particularly slow saves with lengthy "not responding" messages (we are talking 4-5 minutes until I recieved a response), I closed Captivate and restarted my computer. The following are all of the error screens.
This was the first message I recieved after trying to go back and work with my document.
If someone could advise one of two things, I would greatly appreciate the help.
a) Is there anyway to recover this document?
b) How do I stop Captivate from failing every time I start importing and editing audio/slide timing?
Thank you in advance for your assistance.

Hi There,
Welcome To Adobe Forum.
If you are accessing the CPTX file from a network drive or from a domain server than captivate can have unexpected Behaviour.
So can you use the CPTX file from your local machine (by copy pasting to your desktop)
Also check for the imported audio and video file they must be on you local machine as well.
Thanks
l.oveesh

Similar Messages

  • I am using laptop hitting and slow system not working

    i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

    Hi,
    Shut down the notebook.  Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages.
    Note:  If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
    Can you also post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    The first time I attempted to install ML was on a late 2011 MBP.  It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error.  I was using the original ML install app, not a USB or other drive.  
    After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps.  I closed apps  manually a few times to no avail.  I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it.  The install went smoothly after that. 
    I since installed ML in two iMacs using a cloned copy of the install app on a USB drive.  This time I shut down the computers and booted into Safe Mode first and there were no problems. 
    I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
    Jay

  • Gettin "Assertion Failed" message and "Assert: parent node must have _DOMElement set", first when trying to bookmark and then when the "auto fill" on some web sites is used. Started after 3.6.9 automatic upgrade.

    Open Firefox and navigate to web site. Try to save to bookmarks and get the "assertion Failed" message and "Assert: parent node must have _DOMElement set" followed by a list of 8 (0-8) items.

    Try the Tiny Menu extension. I am using an older version of Tiny Menu on Lucid with Firefox 3.6.x and it works fine.

  • I have a ipad 3 with ios 5.1.1 and it will not update to ios 7. I keep getting a software failed message and the download takes 13 hours and stops half way through. Any help?

    I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?

    it actually needs more space than that.  The file size is your 65 mb is probably the ota incremental file size.  The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
    There is a fairly good discussion here
    https://discussions.apple.com/message/23680750#23680750

  • SM 58 loading problem and slow system

    Hi 
    This is the problem
    I got to one of my old projects for a week of easy holiday cover ) and most internal BW loads are taking forever or not even finishing.
    I saw there were lots and lots of old entries in sm58 so I deleted them thinking this would help and it has a little but sm58 still seems to be taking a long time to do its thing.  I also extended the dialogue process time but it still seems Sm58 is taking too loand and causing missing messages in my laods.
    When records go in to SM58 it seems that it takes awhile to deal with them and I sometimes have to do it manually (F6) which is not ideal and obviously cannot continue.
    It now give the message when loading of missing messages and this always seems to be stuck on yellow on the update rules part of each data package in RSMON with message missing messages.
    I am hoping there is some logs or tables that maybe are full like idoc logs or something that is making everything go so slow????
    Maybe there is a table that is just so full and its not getting deleted and causing this to go slow and loading almost non existent. Maybe some indexes or something???
    Maybe it is something else as they have put in a few service packs lately I think 16 to 20.
    Any ideas??

    Your BASIS guy can help in clearing the iDocs and also check on performance.
    Cheers,
    Neel.

  • Fail Messages and Calls - iOS5.0.1

    Hey Apple,
    I have been having problems sending out messages since the update.
    It shows "Sending" and nothing else , about 6 minutes later , Message sending failure pops out , and the phone was trying to search for the carrier .
    I found out that , everytime, right after it searches the carrier , the messages and calls are successful. But if I am late for about 6~7 secs after the search , everything bounds back to the same problem - FAIL CALLS AND MESSAGES.
    Help me solve the problem. Please , thank you.

    You will probably need to contact your carrier since you are losing connection.

  • EDI over WCF request-response port - how to catch failed messages and send response over a 2 way port

    I'm using BizTalk 2009.  I've written an orchestration for accepting 270's and returning 271's, and another for 276's and 277's.  The incoming and outgoing EDI stream is wrapped in XML.  I've published the schema using the WCF publishing wizard,
    and I am using the WCF-WSHttp adapter.  I have custom pipeline components to unwrap and wrap the XML, and to handle the NACK generated by the adapter.  Everything works fine if valid EDI is received. 
    However, I'm challenged with handling failures from the EDI disassambler.  The specification I've been given is to return a 271 or 277 in all cases (or as many as possible).  What I would like to do is catch the failed message, generate a (271
    or 277) response, and return that response over the 2-way port.  I know how to enable failed message routing and how to subscribe to the message if it were to come in over a one-way port.  It seems that this cannot be done when the message comes
    in over a 2-way port. 
    Any suggestions on how this can be done?

    I should have mentioned that turning off as much EDI validation as I can in the pipeline is already part of my approach.  However, to my knowledge, there are some validations (such as incorrect segment count in the SE) that cannot be disabled. 
    Regarding the TA1/997/999 - because this is a real time transaction, I'm not generating any.  Still, to take your suggest, I decided to generate a 997, thinking I could at least subscribe to it and if the 997 indicated a failure, to
    generate the response (in the form of a 271 or 277) that my trading partner is expecting.  What I found was that the 997 was being returned through the send pipeline of the 2 way port, EVEN WHEN I set RouteAckOn2WayPort to False on the receive pipeline! 
    This produces even more work for me, because now I have to "eat" the acknowledgement so that the 271 or 277 can get through.

  • Please help I keep on getting a failed message and can't find help anywhere

    I switched computers and could not switch songs on my iTunes, even after following instructions, so I did it on my own. I clicked the transfer and sync option, knowing it would replace all my iPod songs with whatever was on my iTunes. Now I can only get 7 songs instead of almost 800 onto my iPod before getting this message:
    "attempting to copy to the disk "MICHELE'S I" failed. An unknown error occurred (-69)"
    I installed the latest version of iTunes, as well as restoring my iPod to factory status, and nothing has happened.
    Please at least give me an idea of what I'm dealing with! I really need help!

    You are getting this when doing what?

  • How do I A) Edit failed messages and B) Stop Mail from trying after failing

    I'm trying to send an email but it keeps coming back and saying the address isn't valid. It's a very long email and don't want to re-type the whole thing, but would prefer instead to send it to myself so I can edit it on my computer. When I go to outbox, I see it there but I can't figure out a way to edit it. In addition, it seems that the outbox is constantly trying to send even after i fails in turn preventing any new messages from coming in. In other words, the only way I can get new messages is to delete this message from my outbox. I don't want to do this until I have sent it to myself. So A) how do I edit this message once it's in my outbox and B) is there a way to stop Mail from trying to send over and over even after it says that it has failed?

    I had this problem a week or so ago......
    I'll speak generally from memory. Sorry, I can't be as specific as possible, but this method did work for me on three bad messages I had over a couple of days.
    I got the message into edit mode, possibly by selecting a send it to me option, possibly not.
    The correction was to click on the outgoing address in the header and then the iPhone presented me with my outgoing email address options. Changing the out-going address fixed the message.
    I may have been left with the original message, but the complete copy with the corrected address went through, and then I deleted the incorrect version once I was certain it went out okay.
    Afterwards, I make certain I'm selecting an out-going address that the iPhone will work with. My home Roadrunner address is what fails on the iPhone, when I make certain to use my Google address, all works fine. And if a message fails on me, I check that out-going address to see if that was the problem and needs to be changed.

  • Regular timeouts and slow system

    Team,
    We are regularly getting timeouts for users on our IDES system.
    This is a dump of our ST02 screen:
    System:                  sap6ides_C10_00             Tune summary
    Date + Time of Snapshot: 18.08.2010      11:32:32    Startup:     20.04.2010 19:18:57
    Buffer             HitRatio % Alloc. KB Freesp. KB % Free Sp. Dir. Size FreeDirEnt % Free Dir    Swaps     DB Accs
    Nametab (NTAB)                                                                                0
       Table definition     98,50     6.798                          20.000                              0
       Table definition     98,50     6.798                          20.000                          4.638     193.422
       Field definition     99,59    51.563      7.928      15,86    20.000     12.853      64,27   36.873      44.444
       Short NTAB           99,74     3.625      1.741      58,03     5.000        905      18,10        0       4.095
       Initial records      58,43     6.625      3.770      62,83     5.000        756      15,12   49.952      54.196
                                                                                    0
    program                98,93   300.000      1.077       0,37    75.000     67.819      90,43  134.795     436.695
    CUA                    99,62     5.000      1.318      32,15     2.500      2.355      94,20  128.786       4.595
    Screen                 99,60     4.297                           2.000      1.671      83,55    1.612      11.290
    Calendar               99,99       488        260      55,20       200         98      49,00        0         102
    OTR                   100,00     4.096      3.375     100,00     2.000      2.000     100,00        0
                                                                                    0
    Tables                                                                                0
       Generic Key          99,97    58.594      3.647       6,39     5.000        221       4,42      180      95.637
       Single record        58,67    10.000        170       1,73       500        450      90,00    1.076  16.922.960
                                                                                    0
    Export/import          66,26     4.096        517      15,31     2.000        904      45,20  351.112
    Exp./ Imp. SHM         80,09     4.096      3.351      99,26     2.000      1.999      99,95        0
    SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
    Roll area            4,20      2.519      6.400     60.000          0   IDs           99,99
    Page area            2,09      5.490    161.504     32.000    230.144   Statement    100,00
    Extended memory     21,39    503.808  2.256.896  2.355.200          0                  0,00
    Heap memory                        0          0    524.285          0                  0,00
    There is a lot of RED in the Swaps column. The box is a Windows Server with 4GB of memory allocated to it.  Any thoughts on where to start tuning this system?

    WOw ... Very unreadable format ... Can you repost question ... About time outs are you check the st03n load and know from here this long execution's are coming ? The DB you have are ?
    The box is a Windows Server with 4GB of memory allocated to it
    are is 32 bit? How you divided this 4 GB (how much for DB and for Application server)
    The 4 GB is to small are you trying for testing increae the rdisp/max_wprun_time ?
    Any other information?

  • DVD Pro Is EXREMELY SLOW  and slow system

    I am running DVD Pro Studio on a PowerMac G5 with 4 meg of RAM
    It is painfully slow... the inspector freezes when I try to show shapes..
    loading assets in stills (granted they are big files) is beyond painful
    frankly I went to a mac to do just this..

    ... loading assets in stills (granted they are big files)
    If your sytem is being slowed up by large graphics - which DVD SP doesn't like - try making them the right size first.
    4:3 stills (with linear pixels) only need to be 768 x 576 pixels [PAL], or 640 x 480 pixels for NTSC, which should only require between 1 and 2 MB. Convert to 720 x 576 [PAL] TV pixels, or 720 x 480 [NTSC] TV pixels.

  • Spot Removal and slow system after a few clicks

    Hello All,
    I just wanted to bring attention to a very annoying issue. If you use spot removal function a few times in a lightroom session, you end up with the impossibility to use it anymore if you do not exit lightroom and start again from zero.
    What I mean is that after a few clicks on spot removal on 2-3 pictures, when you need to use it again on picture number 4, for example, the function is almost unusable (very slow movements that make impossible to put the spot tool in the right place).
    If you then exit lightroom and start again everythimg is fine for a while. It seems it is allocating memory each time you use it....anybody having the same problem? Any idea how to solve it? I have been dealing with this since previous versions and it has never ben solved (if it is indeed a bug!).
    Thanks all!
    Cristiano

    Hi Hans,
    yes, I guess we'll have to wait...
    I have worked with lightroom in the past and then moved to NX2 for a couple of months because I was loving the picture control correspondance with my raw files....then I was so desperate that I moved back to LR. NX2 was too slow and a very bad piece of software for me...altough I will keep an eye to future releases.
    I am on a Mac.
    Thanks!
    Cristiano

  • VMWare Fusion and slow system: solution

    Having seen few answers to this problem on the Forum and many posts with the same issue, and finally figuring it out myself, I post a solution to the sluggish behaviour of SnowLeopard when VMWare Fusion 3 is running, and the beachball keeps appearing whenever you do anything else outside Fusion.
    I had allocated a lot of memory to the virtual machine during installation (with 4 Gb on board I thought let's make it fast) but this turns out to be a bad idea.
    • do a restart fo your Mac and wait untill all startup processes have finished (VMWare should NOT be one of the startup processes in this test)
    • turn on the activity monitor and open the tab System Memory.
    • now fire up your virtual machine and check how much memory is set to INactive. In my case this was a lot, reducing free memory to almost zero
    So for any other activity that is going on behind the scenes (emails, dropbox syncs, TimeMachine etc etc), memory swaps are necessary which take time (and may lead to crashes sometimes).
    To solve this issue
    • shot down virtual machine (not VMWare Fusion
    • select Virtual Machine > Settings > Processors & RAM and trigger the help file to get instructions depending on your requirements.
    e.g. virtual Windows XP, running only Office or a browser, requires no more then 1 processor, 512 Mb RAM.
    • now start your virtual machine again and check the Memory usage in the Activity Monitor. Your system should be a lot snappier now.

    Sijmons wrote:
    Having seen few answers to this problem on the Forum and many posts with the same issue, and finally figuring it out myself, I post a solution to the sluggish behaviour of SnowLeopard when VMWare Fusion 3 is running, and the beachball keeps appearing whenever you do anything else outside Fusion.
    I had allocated a lot of memory to the virtual machine during installation (with 4 Gb on board I thought let's make it fast) but this turns out to be a bad idea.
    There's a free electronic book (because of sponsorship by VMware): Take Control of VMware Fusion 3" (http://www.takecontrolbooks.com/vmware-fusion-3) that has advice on RAM allocation with VMware Fusion 3 and many other topics. You might find it useful.

  • Error message and slow Photoshop

    Hi
    Have downloaded the trial version for Photoshop CS6 and will start studing Photoshop next week and was therefore going to buy the program as well. However, I'm struggling getting it to work properly, a message shows up when I start Photoshop saying "Photoshop detected graphics hardware that is not sufficially supported. If you experience problems..." I've done what they are suggesting, i.e. untick the "Use Graphics Processor" in the performance box but this make the 3D option not working at all.
    I've got Windows 7.
    Is there anything I can do to make this work?
    Thanks for all help I can get.
    Kind Regards
    Karolin

    Hi
    Not sure if I've got the right info, but could this be my Graphics Display Card:
    mobile intel r 4 series express chipset family
    Thanks

Maybe you are looking for