Fail over possible for 9i db, using Veritas VCS bet 32bit and 64 bit

Folks,
We are planning to use 9i R2 (9.2.0.2.0) on
Sun Solaris, using Veritas VCS .
Can we have one OS as Solaris 32 bit and
the fail over box as Solaris 64 bit.
Thanks
Ashish

Follow up question -
I am able to successfully fail over the ABAP portion of the ABAP+J2EE environment we have. This is done by altering the profile parameters in the DEFAULT profile to reflect the cluster alias rather than the actual host name.
But in the confitool of the J2EE, there are some fields that have the actual hostname hardcoded. These are in the DB, so they are host independent:
Global Disp. config>managers>ClusterManger:
ms.host = <host>
Global Disp. config>managers>LockingManger:
enq.profile.filename = /usr/sap/<SID>/SYS/profile/<SID>_DVEBMGS##_host
enqu.host = <host>
Global Server Config>managers>Cluster Manager:
ms.host = <host>
Global Server Config>managers>Locking Manager:
enq.profile.filename = /usr/sap/<SID>/SYS/profile/<SID>_DVEBMGS##_host
enqu.host = <host>
I suspect I can change the physical host names to the alias, but how can the J2EE know which profile to look at based on what physical host it's running on? ABAP knows by just reading the profile that has the real host name in it.

Similar Messages

Have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

Because ratings don't travel with the files or the playlist.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

Is possible for me to use the wireless connection from my Macbook Pro

Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

Yes. Just use internet sharing on your MacBook Pro.

I have an ipod touch 4 gen.Is it possible for me to use the internet with bluetooth?

I have an apple ipod 4 gen.Is it possible for me to use the internet using bluetooth?helpp!!!

Yes but only to tether to an iPhone. The iPhone must have the optional tethering data plan.

Hi, is it possible for me to use my irish Iphone 4 in canada with a canadian bill paid sim card?

Hi
Is it possible for me to use my Irish I phone 4 in Canada? I would like to get a Canadian bill paid sim card / local no for one year!

If your phone is officially unlocked, yes. Otherwise, no. So, contact your carrier BEFORE you leave to see if they offer unlocking & what the cost/procedure is. There is no other way to get an iPhone officially unlocked...only the carrier an iPhone is locked to can authorize such.

I have 2 MacBooks, is it possible for me to use my creative cloud on both?

I have 2 MacBooks, is it possible for me to use my creative cloud on both?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

What port number for Desktop Sharing using in Lync Server 2013 and Lync Online

Dear All,
My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
I will deny this port on personal firewall each client.
Thank you for your advise.

Hi,
I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
I hope that helps some.
Kind regards
Ben

Certified operating systems for 32bit and 64 bit with bussines intelligence

Hi,
Pls can you tell me where I can find the list of certified operating systems for 32bit and 64 bit with bussines intelligence standart edition1.
thank you in advance,
Denis

Check the documentation:
http://www.oracle.com/technetwork/middleware/real-time-decisions/downloads/bi-se1-089899.html
regards
John
http://www.obiee101.blogspot.com/

Load balancing not happending but fail over is for Read only Entity beans

          The following are the configuration.
          Two NT servers with WL5.1 sp9 having only EJBs(Read only entity beans)
          One Client with WL5.1 sp9 having servlet/java application as
          EJB client.
          I am trying to make a call like findbyprimarykey in one of the
          entity bean. I could see the request is being directed only to the one of the
          server always. When I bring that server, fail over is happening to the other server.
          Here are the settings I have in the ejb-jar.xml :
                    <entity>
                         <ejb-name>device.StartHome</ejb-name>
                         <home>com.wl.api.device.StartHome</home>
                         <remote>com.wl.api.device.StartRemote</remote>
                         <ejb-class>com.wl.server.device.StartImpl</ejb-class>
                         <persistence-type>Bean</persistence-type>
                         <prim-key-class>java.lang.Long</prim-key-class>
                         <reentrant>False</reentrant>
                         <resource-ref>
                              <res-ref-name>jdbc/wlPool</res-ref-name>
                              <res-type>javax.sql.DataSource</res-type>
                              <res-auth>Container</res-auth>
                         </resource-ref>
                    </entity>
          Here are the settings I have in the weblogic-ejb-jar.xml.
          <weblogic-enterprise-bean>
                    <ejb-name>device.StartHome</ejb-name>
                    <caching-descriptor>
                         <max-beans-in-cache>50</max-beans-in-cache>
                         <cache-strategy>Read-Only</cache-strategy>
                         <read-timeout-seconds>900</read-timeout-seconds>
                    </caching-descriptor>
                    <reference-descriptor>
                         <resource-description>
                              <res-ref-name>jdbc/wlPool</res-ref-name>
                              <jndi-name>weblogic.jdbc.pool.wlPool</jndi-name>
                         </resource-description>
                    </reference-descriptor>
                    <enable-call-by-reference>False</enable-call-by-reference>
                    <jndi-name>device.StartHome</jndi-name>
               </weblogic-enterprise-bean>
          Am I doin any mistake in this?
          Any one's help is appreciated.
          Thanks
          Suresh


we are using 5.1
          "Gene Chuang" <[email protected]> wrote in message
          news:[email protected]...
          > Colocation optimization occurs if your client resides in the same
          container (and also in the same
          > EAR for 6.0) as your ejbs.
          >
          > Gene
          >
          > "Suresh" <[email protected]> wrote in message
          news:[email protected]...
          > > Ok....the ejb-call-by-reference set to true is making the call to one
          server
          > > only. i am not sure why it is. I removed the property name and it
          works.
          > > Also I have one question, in our prduct environment, when i cache the
          ejb
          > > home it is not doing the load balancing. can any one help me for that.
          > > thanks
          > >
          > > Mike,
          > > From the sample pgm I sent, even from single client calls get load
          > > balanced.
          > >
          > > Suresh
          > >
          > >
          > > "Gene Chuang" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > In WL, LoadBalancing will ONLY WORK if you reuse your EJBHome! Take
          your
          > > StartEndPointHome lookup
          > > > out of your for loop and see if this fixes your problem.
          > > >
          > > > I've seen this discussion in ejb-interest, and some other vendor
          (Borland,
          > > I believe it is), brings
          > > > up an interesting point: Clustering and LoadBalance is not in the
          J2EE
          > > specs, hence implementation
          > > > is totally up to the vendor. Weblogic loadbalances from the remote
          > > interfaces (EJBObject, EJBHome,
          > > > etc..), while Borland loadbalances from JNDI Context lookup.
          > > >
          > > > Let me suggest a third implmentation: loadbalance from BOTH Context
          > > lookup as well as stub method
          > > > invocation! Or create a smart replica-aware list manager which
          persists
          > > on the client thread
          > > > (ThreadLocal) and is aware of lookup/evocation history. Hence if I do
          the
          > > following in a client
          > > > hitting a 3 node cluster, I'll still get perfect round-robining
          regardless
          > > of what I do on the
          > > > client side:
          > > >
          > > > InitialContext ctxt = new InitialContext();
          > > > EJBHome myHome = ctxt.lookup(MY_BEAN);
          > > > myHome.findByPrimaryKey(pk); <== hits Node #1
          > > > myHome = ctxt.lookup(MY_BEAN);
          > > > myHome.findByPrimaryKey(pk); <== hits Node #2
          > > > myHome.findByPrimaryKey(pk); <== hits Node #3
          > > > myHome = ctxt.lookup(MY_BEAN);
          > > > myHome.findByPrimaryKey(pk); <== hits Node #1
          > > > ...
          > > >
          > > >
          > > > Gene
          > > >
          > > > "Suresh" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > > Mike ,
          > > > >
          > > > > Do you have any reasons for the total number of machines to be 10.
          > > > >
          > > > > I tried with 7 machines.
          > > > >
          > > > >
          > > > > Here is my sample client java application running individual in the
          > > seven
          > > > > machines.
          > > > >
          > > > > StartEndPointHome =
          > > > > (StartEndPointHome)ctx.lookup("dev.StartEndPointHome");
          > > > > for(;;)
          > > > > {
          > > > > // logMsg(" --in loop "+currentTime);
          > > > > if (currentTime > nextRefereshTime)
          > > > > {
          > > > > logMsg("****- going to call");
          > > > > currentTime=getSystemTime();
          > > > > nextRefereshTime=currentTime+timeInterval;
          > > > > StartEndPointHome =
          > > > > (StartEndPointHome)ctx.lookup("dev.StartEndPointHome");
          > > > > long rndno=(long)(Math.random()*10)+range;
          > > > > logMsg(" going to call remotestub"+rndno);
          > > > > retVal =
          > > > >
          > >
          ((StartEndPointHome)getStartHome()).findByNumber("pe"+rndno+"_mportal_dsk36.
          > > > > mportal.com");
          > > > >
          > > > > logMsg("**++- called stub");
          > > > > }
          > > > >
          > > > >
          > > > >
          > > > > The range value is different for each of the machines in the
          cluster.
          > > > >
          > > > > If the first request starts at srv1, all request starts hitting the
          same
          > > > > server.
          > > > > If the first request starts at srv2, all request starts hitting the
          same
          > > > > server.
          > > > >
          > > > > I have the following for the url , user and pwd values for the
          context
          > > .
          > > > >
          > > > > public static String url="t3://10.11.12.14,10.11.12.117:8000";
          > > > > public static String user="guest";
          > > > > public static String password="guest";
          > > > >
          > > > >
          > > > >
          > > > > It would be great if you could help me.
          > > > >
          > > > > Thanks
          > > > > suresh
          > > > >
          > > > >
          > > > > "Mike Reiche" <[email protected]> wrote in message
          > > > > news:[email protected]...
          > > > > >
          > > > > > If you have only one client don't be surprised if you only hit one
          > > server.
          > > > > Try
          > > > > > running ten different clients and see if the hit the same server.
          > > > > >
          > > > > > Mike
          > > > > >
          > > > > >
          > > > > > "suresh" <[email protected]> wrote:
          > > > > > >
          > > > > > >The following are the configuration.
          > > > > > >
          > > > > > > Two NT servers with WL5.1 sp9 having only EJBs(Read only entity
          > > beans)
          > > > > > >
          > > > > > > One Client with WL5.1 sp9 having servlet/java application as
          > > > > > > EJB client.
          > > > > > >
          > > > > > >
          > > > > > >I am trying to make a call like findbyprimarykey in one of the
          > > > > > >entity bean. I could see the request is being directed only to
          the
          > > one
          > > > > > >of the
          > > > > > >server always. When I bring that server, fail over is happening
          to
          > > the
          > > > > > >other server.
          > > > > > >
          > > > > > >
          > > > > > >Here are the settings I have in the ejb-jar.xml :
          > > > > > > <entity>
          > > > > > > <ejb-name>device.StartHome</ejb-name>
          > > > > > > <home>com.wl.api.device.StartHome</home>
          > > > > > > <remote>com.wl.api.device.StartRemote</remote>
          > > > > > > <ejb-class>com.wl.server.device.StartImpl</ejb-class>
          > > > > > > <persistence-type>Bean</persistence-type>
          > > > > > > <prim-key-class>java.lang.Long</prim-key-class>
          > > > > > > <reentrant>False</reentrant>
          > > > > > > <resource-ref>
          > > > > > > <res-ref-name>jdbc/wlPool</res-ref-name>
          > > > > > > <res-type>javax.sql.DataSource</res-type>
          > > > > > > <res-auth>Container</res-auth>
          > > > > > > </resource-ref>
          > > > > > > </entity>
          > > > > > >
          > > > > > >
          > > > > > >Here are the settings I have in the weblogic-ejb-jar.xml.
          > > > > > >
          > > > > > ><weblogic-enterprise-bean>
          > > > > > > <ejb-name>device.StartHome</ejb-name>
          > > > > > >
          > > > > > > <caching-descriptor>
          > > > > > > <max-beans-in-cache>50</max-beans-in-cache>
          > > > > > > <cache-strategy>Read-Only</cache-strategy>
          > > > > > > <read-timeout-seconds>900</read-timeout-seconds>
          > > > > > > </caching-descriptor>
          > > > > > >
          > > > > > > <reference-descriptor>
          > > > > > > <resource-description>
          > > > > > > <res-ref-name>jdbc/wlPool</res-ref-name>
          > > > > > > <jndi-name>weblogic.jdbc.pool.wlPool</jndi-name>
          > > > > > > </resource-description>
          > > > > > > </reference-descriptor>
          > > > > > > <enable-call-by-reference>False</enable-call-by-reference>
          > > > > > > <jndi-name>device.StartHome</jndi-name>
          > > > > > > </weblogic-enterprise-bean>
          > > > > > >
          > > > > > >
          > > > > > >Am I doin any mistake in this?
          > > > > > >
          > > > > > >Any one's help is appreciated.
          > > > > > >Thanks
          > > > > > >Suresh
          > > > > >
          > > > >
          > > > >
          > > >
          > > >
          > >
          > >
          >
          >

Fail-over options for Standalone Print Server

Our organization recently set up 3 2012 r2 Print Servers to handle 3 separate sites. Each printer server contains only the printers within the site - which makes each server a standalone print server. I'm concern with the issue of not
having a fail-over plan in place, in the event one of my server should fail. Does anyone have any fail-over suggestions.

Hi Thomas,
If we want to create a clustered printer server, we need to created another print server in the same site.
For detailed information, please refer to the link below:
https://technet.microsoft.com/en-us/library/cc771091.aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is it possible for a module to remember last viewed slide and user interactions without an LMS?

I am developing a captivate module (using Captivate 6) that can be run either off a local hard drive or web server (not an LMS).
I am hoping that the user will be able to close down the module and then return to it at a later time. Considering the module will not be run via an LMS Is it possible for the module to remember not only the last slide that the user viewed but also any interactions that the user has conducted. For example: saved information in variables, image states (whether or not they have been clicked etc), widgets (I am hoping to use the drag and drop widget so I want the course to be able to remember what items they have dragged where).
Is this possible? I know there is a bookmark widget that uses cookies to remember the last slide the user viewed. I am also aware of another widget that allows you to save variables for use between projects, but in this case I will only have one project file. Is there something out there that does everything I need?
Does the 'self paced learning' checkbox in the TOC save user interactions?
Thanks!

Thanks Lilybiri. So it sounds like there is no easy way to save interactions when run locally. Would using javascript (thats run when a user clicks a save button for example) be possible? Get the script to save a cookie with all the variables and 'states'? I know that saving the variables is possible because there is already a widget that does that, so wondering if there is a way to save the slide states as well (for example whether or not images have been clicked etc).
Alternatively, if I create the project in captivate, is it possible to import into flash with all the functionality and actionscript intact and editable? From there I could then modify it to remember the saved states? (i am not proficient with actionscript so just thinking of potential solutions).

Regarding the Customer Setup for ISA B2B using SAP J2EE 6.4 and NWDS

Hi
Does someone knows how we can setup a customer project using
SAP J2EE 6.4 and NWDS.
I've tried to setup the project but facing a weird problem..
I've ISAWAC640SP11 and ant buildtool to build the application.
I didn't get any "sda_build.xml" in this patch (ISAWAC640SP11).
i've used "sda_build.xml" of ISAWAC40SP11.
I've build the application using build tool but when i try to deploy it
on SAP J2EE 6.4 using SDM i get a weird message stating
<b>"com.sap.sdm.util.sduread.IllFormattedSduFileException: The archive must be deployed with a 6.20 SDM, which has a SDM-SDA compatible version 1 or greater."</b>
Does anyone knows from where can i get the sda_build.xml file compatible with
ISAWAC640SP11 ??
Also can some one suggest me to setup a customer project for extension and
modification of ISA B2B 640 on NWDS and SAP J2EE 6.4....
Thanks & Regards
Sandeep Solanki

Hi,
I am Rajesh..and it seems that you and I are facing the same problem. Well, I am really finding it hard to find material like PDF's files on Build Tool. and ISA Development and Extension Guide.
I would really appreaitate if you could send me some material. Well, My project is very simple and I have been given the task to first submit a simple demo of B2C on R/3 system. ( Not CRM ). I have also installed the NWDS and everything including the ISA WAC Java components. I am having real hard time in modifying them....
Can you please shed light on it...You can also email to me at [email protected]
Thanks in Advance for your kind consideration.
Rajesh.

Which format for External HD using Mac OSX Windows Xp, and Vista?

Hi
I've had problems with using an extermal HD and am looking for some further information...
I have recently purchased a 500 g external iomega hard drive. I need it to be compatible with my mac using osx, and with pc's using both Windows XP and vista. I will routinely be needing to transfer files from all three platforms.
I had reformatted my hard drive to FAT32 on the pc using windows xp and it worked fine, then took it home and used in on my mac, and it is now no longer recognized on the pc.
The HD is under disk manager is showing that it is formatted as FAT32 but I cannot use the drive. I cannot download programs to use on the PC's to make the drive compatible but could on the mac.
What are my best options to share files reliably?
Thanks

Add NTFS write support to Mac OS instead.
MacFUSE +3G is a good start.

Fail over possible for 9i db, using Veritas VCS bet 32bit and 64 bit

Similar Messages

Maybe you are looking for