FAIL: process hdbdaemon HDB Daemon not running - HANA

Hello guys,
I'm not being able to start a SAP HANA instance. Here's the output of the HDB start command:
I've already check the free space on the files systems as you can see here:
I can't figure out what is happening. Any suggestions?
Regards.

The startup error is somewhat misleading as Serge commented above:-
  > FAIL: process hdbdaemon HDB Daemon not running
In a recent HEC HANA DB startup error scenario, the clue was this message in the startup.log file in the trace directory:-
> Unable to change to Directory /usr/sap/<SID>/HDB<nn>/vh<cid><sid>db01/trace
It turned out that the profile was edited with the incorrect instance number <nn>.  After correcting this error, HANA DB started up successfully.

Similar Messages

  • Process hdbdaemon HDB Daemon not running

    Hi.
    I was working on Hana Studio, i wanted to do a recovery, so Hana Studio stopped the instance, so i click on cancel the recovery and when i went to start again the instance it showed me this Error:
    So i went to Linux Server (hanab1) to start manually HDB, and again showed me the same error:
    So what can i do to fix this without doing a reinstallation of HANA???...I hope you can help so i can continue working on my client schemas.

    Hi Miller,
    See if the below note is usefull.
    A procedure is implemented in the SAP HANA database that, after a failed recovery, prevents the database that is inconsistent as a result from starting. During this, the system writes the state transitions to the topology tree of a name server during a recovery, and deletes these if the recovery is successful. If the recovery is not completed successfully, relevant entries remain in the topology tree as a result. This causes the database start to terminate.
    However, due to an error in the implementation of revision 23, entries of this type were permanently written to the topology tree for failed database backups. Therefore, these entries also prevent a subsequent restart or upgrade of the SAP HANA database.
    1678038 - Restarting SAP HANA database fails
    Regards,
    Pavan Gunda

  • Daemon not running

    I am trying to run OEM and it is failing to start do to the daemon not running. On the http://localhost:5500/em login page it says the database might be shutdown and has a startup and recovery button. I clicked on startup, even though I know the database is up. I put in the login credentials and it fails with an IO error.
    Can anyone help me?

    Hi
    I can tell you about the Windows Environment. These steps may solve your problem.
    Check and perform the following.
    1. DBSNMP and SYSMAN accounts are NOT LOCKED.
    2. OS user responsible for starting services is a member of ORA_DBA group.
    3. OS user is a member of LOGON AS BATCH JOB in Local Security Policy.
    4. In Host Credentials provide the OS user name in the following way
    DOMAIN_NAME\username.
    5. Verify Listener is running and appropriate entries exists in TNSNAMES.ora file.
    Hope it helps.
    Rgds
    Adnan

  • Creating physical standby db through grid control 11g fails with "default listener is not running"

    On step 4/6, i am getting error like below
    ErrorExamine and correct the following error(s), then re-try the operation.Default Listener in Grid Infrastructure - The default listener in the grid infrastucture is not running.
    I have the listener running on grid user and grid home, 11.2 in both primary and standby.
    During these steps till 4, its no where asked for grid user password.
    Not sure how it will detect the grid home listener.
    Listener is running with default port 1521 on both the servers primary and standby
    On the step 4 screen the other option for default listener is non-default listener and its pointing to db home and not grid home.
    So i guess oracle is looking for the listener to be up on the db home and not on grid home causing the issues,
    if so how to fix this ?
    I am using role separation, separate user for grid and oracle homes grid and oracle user and all are on 11.2.0.1 db + grid

    Hello again;
    Check the solution in this: ( and note the multiple versions of oracle it covers )
    UNABLE TO FIND GRID INFRASTRUCTURE LISTENER (Doc ID 1483234.1)
    Best Regards
    mseberg

  • Process with an ID not running

    Hi, 
    I browse lot of websites and could not find any solution for this problem. 
    I did add CSRUN_AROUND_WORKABOUTS to environmental settings.
    Rename IISEXPRESS folder
    Change application config settings but nothing worked. 
    I need help to sort it out.
    Jibran Ishtiaq

    Hi,
    Please refer to the similar discussion:
    http://neimke.blogspot.com/2013/07/problem-trying-to-run-web-application.html
    IF not working for you, please post it in IIS forum where you can get better answers.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Processing table Dispatcher is not running

    Hi All,
    I am trying Web Dynpro Flights tutorial.
    When I start the J2E sever through SAP Management Console
    the status of the J2EE Server and SDM is running but the status of Dispatcher is always Stopped. I also tried  restarting the servers by right clicking the Dispatcher and then selecting "Enable process" but still the status becomes Stopped. Hence I am unable to deploy the application and getting error.
    Please let me know what could be the problem and how
    to start the Dispatcher?
    Thanks in advance.
    Regards,
    Abhijit

    Hi Abhijit,
    Within the file there is an error
    "Wed Aug 04 15:48:42 2004
    ERROR => JStartupFixMemSize: Bad memory size unit in 64 (neither K, M, of G - assuming M [jstartxx.c   1822]"
    It seems that there is a parameter wrong...
    So the easiest way would be to uninstall and install again. BTW - You can order the DVD via SAP Shop (http://www.sap.com/company/shop/) using the following material number 50067985.
    Hope that helps.
    Best regards,
    Karin

  • Mapping is not run after adding to existing Process Flow

    I am about to scream.
    I have a process flow that has been running fine.
    I added a mapping to the existing process flow, deployed the process flow, and now when I run the process flow it will not run the new added mapping.
    What gives? I am going to recreate the process flow, but I will not recreate a new process flow everytime I add a mapping to it.
    What am I doing wrong.
    thanks for any help.
    greG

    Oleg,
    Thanks so much for all the help. I read the other posts and checked my mapping but nothing helped.
    I had to put a transition line directly from the fork to my new process and it worked.
    I think it was kind of a logic error on my part.
    I forgot had all my maps that were called from the Fork just going straight to either Error Warning or Success endpoints.
    I tried to add another process after one of the mappings.
    I forgot that to do that I would have to "OR" up all the transitions coming from the forked maps.
    Then proceed from there.

  • TS1363 I tried to print off some of the iTunes advice but my computer froze. I re-booted the computer and ran the diagnostic test again but now "Secure link to itunes store failed"  AND " itunes helper not running."

    I just tried to print off some itunes advice but my computer froze.  I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to  i tunes store failed" AND "i tunes helper not running" both appeared.   Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen.  Even though I only vaguely know what that means, I don't think that's the help I need.    

    I just tried to print off some itunes advice but my computer froze.  I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to  i tunes store failed" AND "i tunes helper not running" both appeared.   Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen.  Even though I only vaguely know what that means, I don't think that's the help I need.    

  • My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

    My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
    I manually deleted Firefox from the list once I have Windows processing.
    And when I clicked on Firefox, Firefox will open quickly and easily.
    Firefox process in Windows Processes names list called "firefox.exe * 32" is.
    Please try to solve my problem, my problem is how to solve?

    Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
    If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
    You might already have seen these troubleshooting articles. If not, does anything here help:
    * [[Firefox won't start - find solutions]]
    * [[Firefox hangs or is not responding - How to fix]]

  • FAIL: process disp+work.EXE Dispatcher not running

    Hi All,
    I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
    ===================================================
    ============== Starting System NSP ================
    ===================================================
    =============== Starting database instance ...
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    The MaxDB Database Starter, Version 7.7.04.23
    Copyright 2000-2008 by SAP AG
    OK
    ============== Starting ABAP instance ...
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    12.10.2008 12:25:40
    Start
    OK
    12.10.2008 12:25:50
    StartWait
    FAIL: process disp+work.EXE Dispatcher not running
    ============== Start operation timed out !
    Press any key to continue . . .
    Please help me out,
    Peerasit

    Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

  • My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

    my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
    Diagnostics test
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    ECS G31T-M7
    iTunes 10.5.2.11
    QuickTime 7.6.9
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0012ABAC07F3CCB0
    Current user is an administrator.
    The current local date and time is 2011-12-31 14:06:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel(R) G33/G31 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
    Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.5
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Sat Dec 31 13:46:09 2011
    Lease Expires:       Tue Jan 03 13:46:09 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was unsuccessful.
    The network connection timed out.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-12-31 14:00:02.
    **** Device Connectivity Tests ****
    iPodService 10.5.2.11 is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    rawkiss’s iPhone, iPhone 3G running firmware version 4.0
    Serial Number:       86931UEAY7H
    **** Device Sync Tests ****
    Sync tests completed successfully.

    I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
    Here is a link that will take you directly to the Tech Note:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
    When using this fix the Tech Note indicates:
    "Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
    however it did retain the captions (at least it did for me).

  • Server Process  is not running in the  WAS  JAVA

    Hi,
    The WAS JAVA  have the resources Netweaver7.0 and java is j2sdk1.4.2_13 version Operating system is Windows2003 and database server is SQLserver2005.
    Previously it was running properly Now it giving the following Error.
    Any one of you please give me suggestions how to solve it .
    Devolper trace for the jcontol.exe process is as follows
    trc file: "D:\usr\sap\NW2\JC02\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 4516
    system name : NW2
    system nr.  : 02
    started at  : Mon Mar 24 17:07:20 2008
    arguments       :
           arg[00] : D:\usr\sap\NW2\JC02\exe\jcontrol.EXE
           arg[01] : pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.box.number=NW2JC02mmsr17] [jstartxx.c   841]
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.en.host=mmsr17] [jstartxx.c   841]
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.en.port=3203] [jstartxx.c   841]
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.system.id=2] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties;D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : mmsr17
    -> ms port    : 3903
    -> OS libs    : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : mmsr17
    -> ms port    : 3903
    -> os libs    : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID28653700 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID28653750 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID28653700           : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [01] ID28653750           : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
    [Thr 4512] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 4512] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\NW2\JC02\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0286537
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=bootstrap
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_bootstrap.out
    -> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlExecuteBootstrap: read instance values after global bootstrap
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.box.number=NW2JC02mmsr17] [jstartxx.c   841]
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.en.host=mmsr17] [jstartxx.c   841]
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.en.port=3203] [jstartxx.c   841]
    [Thr 4512] *** WARNING => INFO: Unknown property [instance.system.id=2] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties;D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : mmsr17
    -> ms port    : 3903
    -> OS libs    : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    [Thr 4512] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : mmsr17
    -> ms port    : 3903
    -> os libs    : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID28653700 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID28653750 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID28653700           : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [01] ID28653750           : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
    [Thr 4512] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID28653700]
    [Thr 4512] [Node: dispatcher bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap_ID28653700]
    -> node name          : dispatcher bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\NW2\JC02\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID028653700
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=bootstrap_ID28653700
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_bootstrap_ID28653700.out
    -> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_bootstrap_ID28653700.out
    -> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_bootstrap_ID28653700
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID28653750]
    [Thr 4512] [Node: server0 bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap_ID28653750]
    -> node name          : server0 bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\NW2\JC02\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID028653750
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=bootstrap_ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_bootstrap_ID28653750.out
    -> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_bootstrap_ID28653750.out
    -> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_bootstrap_ID28653750
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlIBuildProcessList: Maximum error count is set to 4
    [Thr 5144] JControlRequestFunc: Thread 5144 started as listener thread for np messages.
    [Thr 4512] [Node: dispatcher] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID28653700]
    -> node name          : dispatcher
    -> node type          : dispatcher
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -XX:NewSize=57m -XX:MaxNewSize=57m -XX:NewRatio=3 -XX:DisableExplicitGC -verbose:gc -XX:UseConcMarkSweepGC
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 170M
    -> init heap size     : 170M
    -> root path          : D:\usr\sap\NW2\JC02\j2ee\cluster\dispatcher
    -> class path         : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    [Thr 4512] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID28653750]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : D:\usr\sap\NW2\JC02\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
    -> parameters         :
    -> debuggable         : yes
    -> debug mode         : yes
    -> debug port         : 50221
    -> shutdown timeout   : 120000
    [Thr 4512] INFO: Invalid property value [Debbugable=yes]
    [Thr 4512] [Node: SDM] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    JStartupIReadSection: read node properties [sdm]
    -> node name          : SDM
    -> node type          : sdm
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    :
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\NW2\JC02\SDM\program
    -> class path         : D:\usr\sap\NW2\JC02\SDM\program\bin\SDM.jar
    -> OS libs path       : D:\usr\sap\NW2\JC02\j2ee\os_libs
    -> main class         : SDMInternal
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
    -> shutdown class     : com.sap.sdm.jstartup.shutdown.InternalShutDown
    -> parameters         : server sdmhome=D:\usr\sap\NW2\JC02\SDM\program
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    [Thr 4512] JControlMSConnect: attached to message server (mmsr17/3903)
    [Thr 5340] JControlMSMessageFunc: Thread 5340 started as listener thread for ms messages.
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_dispatcher
    -> arg[03] = -nodeId=0
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653700
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_dispatcher.out
    -> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_dispatcher.out
    -> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_dispatcher
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process dispatcher started (PID:5444)
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = -debugMode=yes
    -> arg[12] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:4684)
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_sdm
    -> arg[03] = -nodeId=2
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=sdm
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_sdm.out
    -> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_sdm.out
    -> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_sdm
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process SDM started (PID:5472)
    [Thr 4512] JControlMSSendLogon: delete SDM logon information (rc=0)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlMSSendLogon: insert SDM logon information (port=50218; rc=0)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:4684) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (1)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856249 -bz D:\usr\sap\NW2\SYS\global
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = -debugMode=yes
    -> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:3944)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:3944) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (2)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856314 -bz D:\usr\sap\NW2\SYS\global
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = -debugMode=yes
    -> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:4308)
    [Thr 4512]  Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:4308) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (3)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856350 -bz D:\usr\sap\NW2\SYS\global
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = -debugMode=yes
    -> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:2616)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:2616) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856405 -bz D:\usr\sap\NW2\SYS\global
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:10, argument:1 from pid:0
    [Thr 5144] JControlIDumpStackTrace: dump stacktrace for server0
    [Thr 5144] *** ERROR => Can't send command for stack dump (rc=-3) [jcntrxxi.c   1403]
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:19, argument:1 from pid:0
    [Thr 5144] JControlITraceIncrement: increment trace level for server0
    [Thr 5144] *** ERROR => Can't send command for trace level increment (rc=-3) [jcntrxxi.c   1434]
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
    [Thr 5144] JControlIEnableProcess: enable process server0
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = -debugMode=yes
    -> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:3556)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:3556) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (5)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856490 -bz D:\usr\sap\NW2\SYS\global
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
    [Thr 5144] JControlIEnableProcess: enable process server0
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = -debugMode=yes
    -> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:2872)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:2872) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (6)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189858000 -bz D:\usr\sap\NW2\SYS\global
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:10, argument:1 from pid:0
    [Thr 5144] JControlIDumpStackTrace: dump stacktrace for server0
    [Thr 5144] *** ERROR => Can't send command for stack dump (rc=-3) [jcntrxxi.c   1403]
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
    [Thr 5144] JControlIEnableProcess: enable process server0
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:4836)
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    [Thr 5144] JControlIProcessSoftKill: soft kill of process server0 (pid:4836)
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:4836) died (STOPPING)
    [Thr 4512] JControlIResetProcess: reset process server0
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:5428)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:5428) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (7)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189860005 -bz D:\usr\sap\NW2\SYS\global
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
    [Thr 5144] JControlIEnableProcess: enable process server0
    JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> arg[02] = -DSAPINFO=NW2_02_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
    -> arg[06] = -nodeName=ID28653750
    -> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
    [Thr 4512] JControlICheckProcessList: process server0 started (PID:5196)
    [Thr 4512] Mon Mar 24 17:07:20 2008
    [Thr 4512] JControlICheckProcessList: process server0 (pid:5196) died (RUN-FLAG)
    [Thr 4512] JControlIResetProcess: reset process server0
    [Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (8)
    [Thr 4512] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189860117 -bz D:\usr\sap\NW2\SYS\global
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    [Thr 5144] Mon Mar 24 17:07:20 2008
    [Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
    [Thr 5144] JControlIDisableDebugging: disable debugging server0
    [Thr 5144] JControlIEnableProcess: restart process server0
    Thanks,
    Vivek

    Hi Vivek,
    FYI :
    JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
    The above message can be ignored. You will see that message often in perfectly up/running systems as well.
    Also, the dev_jcontrol file shows that the server process was terminating !
    You need to check std_server0.out file for the errors/exceptions as to why server0 was terminating abruptly. The reason should be apparent from dev_server0 and std_server0 most of the times unless its a startup framework bug where the error messages are not written to the log files.
    So, whenever the server process or dispatcher process fails to start, you should check the corresponding dev_server<n> or dev_dispatcher and std_server<n> / std_dispatcher  files. Also, usually, there will be some exception (if its application related) in the defaultrace file as well under server<n>\log or dispatcher\log depending on which one is failing to start.
    e.g. if server0 is failing to start due to some UME issues, you will see the mention of it in std_server0.out (definitely) and more ellaborate info/exceptions in deafultrace under server0\log as well.
    Hope the above helps.

  • HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running".  Windows 7.

    After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run.  itunes will not now run.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Failed Item Validation = Process Before Headers isn't run? (APEX 2.2.0)

    Hi, all,
    I have an item validation that fails. When the page reloads, I see the following in the debug output:
    Do not run process "P41_BEFORE_HEADER", process point=BEFORE_HEADER, condition type=, when button pressed=If that process doesn't run, a flag I used to decide whether or not to display certain Page 0 regions never gets set properly, resulting in a mess.
    Is there a way around this? The only thing that I can think of is to run the same code in a failed validation that gets run in my process. Is there a more elegant way?
    Thanks!

    I ended up finding Page rendering process doesn't run after validation error which basically says to make a PL/SQL region with an empty template and put any display-related PL/SQL there. I set the PL/SQL region's display point to "After Header", which is before any of my other regions.
    I have a bunch of P0 regions that get conditionally displayed based on session state items set in the "Before Headers" process. All of the items are cleared by an application After Footer process. I don't want to rely on the session state, however, as the user might navigate using the browser buttons on a failed submit, and that might produce odd results. Unfortunately, I've realized that the application-wide processes don't get run either.
    It seems that my option is just to create a PL/SQL function
    FUNCTION SHOW_REGIONS
    THIS_REGION BOOLEAN := FALSE
    , THAT_REGION BOOLEAN := FALSE
    , THE_OTHER_REGION BOOLEAN := FALSE
    and call that function from my empty PL/SQL region, passing in true values for the regions that I want to show. Either this function would set application-level items, or other functions to get the individual flags could be called from each of the Page 0 region conditional display code. I think I will do the latter, unless there is some better way.
    Thanks!
    Message was edited by:
    Don_84
    CREATE OR REPLACE PACKAGE BODY
        TEST_PAGE_0_CONDITIONS
    AS
        my_flag_one BOOLEAN := FALSE;
        my_flag_two BOOLEAN := FALSE;
        PROCEDURE SET_DISPLAY_FLAGS
                FLAG_ONE BOOLEAN := FALSE,
              , FLAG_TWO BOOLEAN := FALSE
        IS
        BEGIN
            my_flag_one := FLAG_ONE;
            my_flag_two := FLAG_TWO;
        END;
        FUNCTION GET_ONE
            RETURN BOOLEAN
        IS
        BEGIN
            RETURN my_flag_one;
        END;
        FUNCTION GET_TWO
            RETURN BOOLEAN
        IS
        BEGIN
            RETURN my_flag_two;
        END;
    END;

  • Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'

    Hi all,
    Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
    'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
    I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
    I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
    it would seem
    some people have had relates to editing the VMX configuration file and adding the line
    hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
    Any help would be greatly appreciated.
    Many thanks in advance.
    James

    The hypervisor event log message is generated only at boot - so this would be expected.  Also vmbus should not be running on the host (I was looking at a VM yesterday)...  This error message is generated only when the vid is determined not to be
    running or cannot communicate with the hypervisor.
    I have seen this due to anti-virus software in the past or due to driver verifier being configured.  Since it looks like you checked driver verifier already do you have anti-virus software installed?  If so have you followed the best practices
    and exempted the Hyper-v services? 
    http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
    To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
    Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
    Custom virtual machine configuration directories
    Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
    Custom virtual hard disk drive directories
    Custom replication data directories, if you are using Hyper-V Replica
    Snapshot directories
    Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    -Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb

Maybe you are looking for

  • Recently did an update of itunes and now it wont open

    it also wont reinstall or repair just constant pop ups telling me its not working what can i do without deleting all my music?!

  • Workflow identification in Sales Order Exit

    Hi, In my Sales order exit, under some conditions Iam raising an error message, when the order is being created in background this order will move to workflow. Now if any one process this order through the workflow i want to allow the order to get po

  • Sales Handling unit enhancement

    Dear friends, This is regarding packing handling units in delivery. I have a customized table which is having ready handling units with reference to sales order. I have a requirement to pick these handling units from Ztable and attach to delivery whe

  • SYS and SYSTEM user password expired

    My 11g2 database on Redhat 5 has sys and system user password expiredSQL> select username,account_status,EXPIRY_DATE from dba_users where username like 'SYS%';   2 USERNAME                       ACCOUNT_STATUS                   EXPIRY_DA SYSMAN      

  • How do I import RH for Word WinHelp project into RH7 HTML?

    I'm trying to convert a WinHelp project (created by someone else in RH5 for Word) into a full HTML Help project in RH7, so that I can build HTML Help or WebHelp outputs. I have tried Menu > File > New > Project > Import tab > select WinHelp Project.