Fail stop-start trex since sap MMC
If I try to stop trex since TREX admnstration console, and MMC option, a Remote Authenticacion screen appear with Username: txdadm user and I need to write the password, after write it correctly, a second screen appear with this error message 'Invalid Credentials', I was looking for a solution, and I found this ...
'Starting/stopping TREX via sap managment console or sapcontrol executable
or TREX python admin tool returns 'invalid credentials'. ...
solution:
Create a file /etc/pam.d/sapstartsrrv as root user with the following content:
#%PAM-1.0
auth requisite pam_unix_auth.so
Change the file permission with 'chmod 0644 sapstartsrv'.
I did it, but I continue with the same problem.
We have the trex version 7.0.44 (7044000506), and our O.S. is a solaris 10g 64bits sparc.
If I try to stop trex since TREX admnstration console, and MMC option, a Remote Authenticacion screen appear with Username: txdadm user and I need to write the password, after write it correctly, a second screen appear with this error message 'Invalid Credentials', I was looking for a solution, and I found this ...
'Starting/stopping TREX via sap managment console or sapcontrol executable
or TREX python admin tool returns 'invalid credentials'. ...
solution:
Create a file /etc/pam.d/sapstartsrrv as root user with the following content:
#%PAM-1.0
auth requisite pam_unix_auth.so
Change the file permission with 'chmod 0644 sapstartsrv'.
I did it, but I continue with the same problem.
We have the trex version 7.0.44 (7044000506), and our O.S. is a solaris 10g 64bits sparc.
Similar Messages
-
Error while starting services in SAP MMC
Hi Everybody,
I had Installed SAP ECC6 version in my laptop, after installation(not restarted laptop) services are already on, i had installed sap gui, and everything i configured, user id and access key of abap developer.
But when i want to stop or start services in SAP MMC, it prompts me for webservice authentication such as OS USER & Password, when i gave my OS user id and password , error message i got as Stop Failed , Invalid credentials.
Please help me on this...
Thanks in Advance
Regards
SudheerHi
Consier your laptop as a server which is hosting the sap application
So you need to always use sidadm for any such administration as we basis normally do
Sucess!!
Ganesh -
SDM not starting up in SAP MMC
Hi There,
I have PI7 installed on win 2003 server with MS Sql server database. Since yesterday after I rebooted the system for some reason my SDM server is not running. I can see its status "stopped" in SAP MMC. Even i am forcely restarting it but its stopping again. Below are the trace findings .
*********sdmlog file*************
Jan 3, 2009 10:25:41 AM Info: = Starting to execute
command 'server' =
Jan 3, 2009 10:25:41 AM Info:
============================================
Jan 3, 2009 10:25:41 AM Info: Starting SDM - Software Deployment
Manager...
Jan 3, 2009 10:25:41 AM Info: tc/SL/SDM/SDM/sap.com/SAP
AG/7.0016.20080423161536.0000
Jan 3, 2009 10:25:43 AM Info: SDM operation mode successfully set to:
Standalone
Jan 3, 2009 10:25:43 AM Info: JStartupFramework is requesting to start
the SDM Server.
Jan 3, 2009 10:25:43 AM Info: SDM is currently detached from
JStartupFramework. Forward this information to the JStartupFramekwork
(disable SDM process).
Jan 3, 2009 10:25:43 AM Info: disabling SDM Process with
JStartupFramework
Jan 3, 2009 10:25:43 AM Info: disabled SDM Process with
JStartupFramework
Jan 3, 2009 10:25:43 AM Info: Waiting up to 60 seconds for shutdown by
JControl before exiting myself.
Jan 3, 2009 10:25:43 AM Info: ====================================
Jan 3, 2009 10:25:43 AM Info: JControl is shutting SDM Server down
Jan 3, 2009 10:25:43 AM Info: ====================================
Jan 3, 2009 10:25:43 AM Info: Server finished sending back the answer
of the ShutdownRequest.
Jan 3, 2009 10:25:43 AM Info: Shutting dispatcher down
*******dev_sdm*********
[Thr 7056] JHVM_RedirectStreams: redirect JVM output into file
D:\usr\sap\SXD\DVEBMGS00\work\jvm_sdm.out
[Thr 9212] Sat Jan 03 10:41:38 2009
[Thr 9212] JLaunchRequestFunc: receive command:17, argument:0 from
pid:8868
[Thr 9212] JLaunchIShutdownInvoke: set shutdown interval
(stop:1230968498/end:1230968618/TO:120)
[Thr 9212] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 9212] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 9212] JHVM_RegisterNatives: registering methods in
com.sap.bc.proj.jstartup.JStartupFramework
[Thr 9212] JHVM_NativeSetState: set process state to 5
[Thr 9212] JLaunchISetState: change state from [Initial (0)] to
[Stopping (5)]
[Thr 9480] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 9480] JsfCloseShm: JsfCloseShm() -> 0
[Thr 9480] JLaunchCloseProgram: good bye (exitcode = 0)
[Thr 8284] [Node: SDM] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_14-x64
[Thr 8284] SlicGetHwid called
[Thr 8284] SlicGetHwId: sysname: Windows NT nodename: SAPXIDEV machine:
2x AMD64 Level 6 (Mod 15 Step 6)
[Thr 8284] release: 5.2 version: 3790 Service Pack 2
[Thr 8284] SlicGetHwId: ID >S-21404795425364284499--1598442986-
SAPXIDEV<
[Thr 8284] SlicGetHwId: CUSTOMER KEY: >L0724656190<
[Thr 8284] JStartupICheckFrameworkPackage: can't find framework package
D:\usr\sap\SXD\DVEBMGS00\exe\jvmx.jar
I CHECKED THIS FILE DOESN'T EXISTS IN THE ABOVE PATH AND I HAVE NOT
REMOVED IT. HOW TO BRING BACK THIS FILE?
**********JVM_SDM (out file) trace file*************
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0016.20080423161536.0000
JStartupFramework is requesting to start the SDM Server.
SDM is currently detached from JStartupFramework. Forward this
information to the JStartupFramekwork (disable SDM process).
Waiting up to 60 seconds for shutdown by JControl before exiting myself.JControl is shutting SDM Server down
Asynchroneously processing shutdown request.
Server finished sending back the answer of the ShutdownRequest.
Shutting dispatcher down
Bye, bye!
I gave the command :
D:\>sdm jstartup sdmhome=D:\usr\sap\SXD\DVEBMGS00\SDM\program\
mode=integrated
and
D:\>sdm jstartup sdmhome="D:\usr\sap\SXD\DVEBMGS00\SDM\program"
mode="integrated"
BUT ITS GIVING "Syntax error. Return code:12"
Could you please help me on this ASAP. My ABAP and java server is running fine.
Just I want my SDM server to run so that my complete system backs to normal.
Thanks,
NajHi,
See this thread SDM Error when Deploying Web Dynpro Application
Try parameter as "mode=integrated" attention for double quotes on all parameter.
Best regards -
How to bounce (stop/start) trex servers
HELP!
We need to bounce trex servers for our client. What are the steps in stopping/starting Text Retrieval and Information Extraction (TREX) servers?
We need immediate help on this. Thanks!have you tried to :
Go to trex server ...
START and STOP the TREX servive ...
Hadar -
Cannot start Process in sap mmc
Hello Sap Gurus,
In RZ10 I have coped default profile into zdefault made some changes in it and have activated it. After this when i tried to start my processes, they are not starting.
I went to SAP-> ecc->Profiles and again reverted my changes in default profile. Even then my processes are not starting.
Please tell me how to resolve this. I am new to this field. So please elaborate the solution so that it can be easily understood by lay men like me.
I am getting the below in process list:
In process list : msg_server.exe : stopped
disp+work.exe : stopped
igswd.exe : stopped
Thanks,
SriNitya,Hi,
As subhash said you should revert the profile, if you have a backup just replace the file in <drive>/usr/sap/SYS/profile.
if not then you should be able to open the File using wordpad / notepad there you can see the Changes done last time as it will be written in file as commented line.
Just undo the changes by using # which will comment the parameter.
Further what was the change that you did in default profile?? still not working please paste Dev_ms log file.
Thanks,
Balaji.S -
SIA fails to start after uninstalling SAP Integration Kit
Hi,
After Uninstalling SAP IK, SIA going completely Stopped and not coming up/Running.
I tried it multiple times in vain, it is not starting at all.
Please help me out...
ThanksHi ingo,
Removed complete package. SAP IK.
And followed all recommended steps from SAP.
1. Uninstall BusinessObjects XI Integration for SAP Solutions.
u2022 On a Windows computer, uninstall the BusinessObjects XI Integration
for SAP from Add/Remove Programs.
2. Run the partnercafuninstall.bat or partnercafuninstall.sh
script, depending on your platform. You must provide the password for
the BusinessObjects Enterprise administrator.
u2022 On Windows, run partnercafuninstall.bat-p BOE_PASSWORD.
After the script finishes, you must also clean up the remaining SAP files.
3. In the installdir\deployment\apps folder, delete SAP.properties
and PartnerPlatformServices.properties.
4. Undeploy and redeploy BusinessObjects Enterprise web applications
using wdeploy from the install\deployment folder and the following
commands:
wdeploy.sh <WAS type> -DAPP=CmcApp -Das_admin_pass
etc...,,
Please help me. -
Failed to start Fail2Ban Service
Hi All,
I used to use fail2ban service to avoid SSH DDos hack in my Arch system.
However, I found faiil2ban service failed to be started recently after I perform a system upgrade (pacman -Syu).
I keep getting failure when try to start fail2ban service by "systemctl start fail2ban.service".
Checked the status, I got below informatoin:
[root@archx system]# systemctl status fail2ban.service
● fail2ban.service - Fail2Ban Service
Loaded: loaded (/usr/lib/systemd/system/fail2ban.service; enabled)
Active: failed (Result: start-limit) since Fri 2014-11-28 09:40:14 CST; 20min ago
Docs: man:fail2ban(1)
Process: 493 ExecStart=/usr/bin/fail2ban-client -x start (code=exited, status=1/FAILURE)
Nov 28 09:40:14 archx systemd[1]: Failed to start Fail2Ban Service.
Nov 28 09:40:14 archx systemd[1]: Unit fail2ban.service entered failed state.
Nov 28 09:40:14 archx systemd[1]: fail2ban.service failed.
Nov 28 09:40:14 archx systemd[1]: start request repeated too quickly for fail2ban.service
Nov 28 09:40:14 archx systemd[1]: Failed to start Fail2Ban Service.
Nov 28 09:40:14 archx systemd[1]: Unit fail2ban.service entered failed state.
Nov 28 09:40:14 archx systemd[1]: fail2ban.service failed.
From the latest /var/log/error.log.1 I see below information:
[root@archx log]# tail errors.log.1
Nov 21 08:14:56 archx sshd[2646]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:14:58 archx sshd[2646]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:00 archx sshd[2646]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:02 archx sshd[2646]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:06 archx sshd[2657]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:08 archx sshd[2657]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:10 archx sshd[2657]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:12 archx sshd[2657]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:15:15 archx sshd[2657]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 21 08:30:07 archx systemd-udevd[135]: [/usr/lib/systemd/network/99-default.link:2] Failed to parse interface name policy, ignoring: kernel
I have no idea about systemd-udevd so I googled about it and found "Predictable Network Interface Names".
http://www.freedesktop.org/wiki/Softwar … faceNames/
Is the failure related to it or it's totally different?
And any idea or guideline that could help me troubleshoot and resolve it?
Your help is appreciated! Thanks!try to set 'backend = systemd' in the /etc/fail2ban/jail.conf file if 'sudo journalctl -xe' say some like
-- Unit fail2ban.service has begun starting up.
nov 27 21:39:38 sL1pKn07 fail2ban-client[1813]: ERROR No file(s) found for glob /var/log/auth.log
nov 27 21:39:38 sL1pKn07 fail2ban-client[1813]: ERROR Failed during configuration: Have not found any log file for sshd jail
nov 27 21:39:38 sL1pKn07 systemd[1]: fail2ban.service: control process exited, code=exited status=255
nov 27 21:39:38 sL1pKn07 systemd[1]: Failed to start Fail2Ban Service.
-- Subject: Unit fail2ban.service has failed
Last edited by sl1pkn07 (2014-11-27 20:49:03) -
After upgrading to the new ios5 software when singing the iTunes starts sincing and it then fails it says that the sinc failed to start. I have removed iTunes rebooted reinstalled iTunes etc but the problem persists.
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 00
M sid ACC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 16 14:07:46 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c 327]
thanks for support
keshavaHi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ACC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework -
SAP MMC Dispatcher disp+work stopped
Dear Friends,
The dis+work process of the SAP MMC remains yellow for some time and then stops.
The developer trace is as below (Due to the character limit a part of the trace is left out) :
=========================================================================
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid J2E
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 236
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 656
Thu Jan 28 12:06:43 2010
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 656) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 236 successfully loaded
shared lib "dw_xtc.dll" version 236 successfully loaded
shared lib "dw_stl.dll" version 236 successfully loaded
shared lib "dw_gui.dll" version 236 successfully loaded
shared lib "dw_mdm.dll" version 236 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Jan 28 12:06:47 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPx64_J2E_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D2D0050, size: 6614144)
DpShMCreate: allocated sys_adm at 000000000D2D0050
DpShMCreate: allocated wp_adm at 000000000D2D2270
DpShMCreate: allocated tm_adm_list at 000000000D2D96D0
DpShMCreate: allocated tm_adm at 000000000D2D9730
DpShMCreate: allocated wp_ca_adm at 000000000D87CFB0
DpShMCreate: allocated appc_ca_adm at 000000000D882DB0
DpShMCreate: allocated comm_adm at 000000000D884CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000D90B980
DpShMCreate: allocated gw_adm at 000000000D90BA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000D90BA30
DpShMCreate: allocated wall_adm at 000000000D90BA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Thu Jan 28 12:06:48 2010
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8189MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 2584
argv[0] = D:\usr\sap\J2E\SYS\exe\uc\NTAMD64\jcontrol.exe
argv[1] = D:\usr\sap\J2E\SYS\exe\uc\NTAMD64\jcontrol.exe
argv[2] = pf=
SAPx64.ritam.com\sapmnt\J2E\SYS\profile\J2E_DVEBMGS00_SAPx64
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=J2E
argv[7] = -DSAPMYNAME=SAPx64_J2E_00
argv[8] = -DSAPPROFILE=
SAPx64.ritam.com\sapmnt\J2E\SYS\profile\J2E_DVEBMGS00_SAPx64
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( SAPx64) [dpxxdisp.c 12650]
DpStartStopMsg: send start message (myname is >SAPx64_J2E_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Thu Jan 28 12:06:49 2010
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 236
Release check o.K.
Thu Jan 28 12:07:28 2010
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 28 12:07:38 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 28 06:37:38 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1468 Ended no 1 0 0
1 DIA 468 Ended no 1 0 0
2 DIA 1028 Ended no 1 0 0
3 DIA 2660 Ended no 1 0 0
4 DIA 360 Ended no 1 0 0
5 DIA 2160 Ended no 1 0 0
6 DIA 2592 Ended no 1 0 0
7 DIA 2284 Ended no 1 0 0
8 DIA 1568 Ended no 1 0 0
9 DIA 1764 Ended no 1 0 0
10 UPD 1412 Ended no 1 0 0
11 ENQ 704 Ended no 1 0 0
12 BTC 1408 Ended no 1 0 0
13 BTC 3068 Ended no 1 0 0
14 BTC 2324 Ended no 1 0 0
15 SPO 2504 Ended no 1 0 0
16 UP2 2348 Ended no 1 0 0
Dispatcher Queue Statistics Thu Jan 28 06:37:38 2010
===========================
=========================================================================
Recently, a DNS server was set up. Due to some non-SAP issues, the DNS server was uninstalled. Now the application server is not using any domain - simply the default workgroup.
From the trace, it seems like the DNS settings need to be adjusted. since the DNS server is uninstalled, I am not sure what settings need to be adjusted. Any help would be appreciated.
Regards,
TSLog of dev_w0 pasted below.
Regards,
TS
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid J2E
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 236
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1468
M
M
M Thu Jan 28 12:06:48 2010
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1468) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F2D0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000F2D0050
M DpShMCreate: allocated wp_adm at 000000000F2D2270
M DpShMCreate: allocated tm_adm_list at 000000000F2D96D0
M DpShMCreate: allocated tm_adm at 000000000F2D9730
M DpShMCreate: allocated wp_ca_adm at 000000000F87CFB0
M DpShMCreate: allocated appc_ca_adm at 000000000F882DB0
M DpShMCreate: allocated comm_adm at 000000000F884CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F90B980
M DpShMCreate: allocated gw_adm at 000000000F90BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F90BA30
M DpShMCreate: allocated wall_adm at 000000000F90BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Thu Jan 28 12:06:49 2010
M ThInit: running on host SAPx64
M
M Thu Jan 28 12:06:50 2010
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.211)
B
B Thu Jan 28 12:06:51 2010
B New connection 0 created
C
C DBSDBSLIB : version 700.08, patch 0.211 (Make PL 0.221)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.211) MVCC support for MaxDB (note 1332203)
C (0.204) Sapinst on windows/maxdb stop with error (note 1323436)
C (0.202) NUMC conversion corrected (note 1288313)
C (0.189) Default value for max. input variables is 2000 (note 655018)
C (0.189) Profile parameter to define max. input variables (note 655018)
C (0.188) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.188) Input parameters for SQL statements increased (note 655018)
C (0.184) Create index serial for MaxDB 7.6 (note 1267841)
C (0.184) More trace in case of packed to string conversion error (note 1262799)
C (0.182) R3trans export aborts with signal 6 (note 1262245)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 113]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#3 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1502]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10631]
M
M Info for wp 0
M
M pid = 1468
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPx64_J2E_00 on host SAPx64 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jan 28 12:06:51 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10851
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1468) [dpnttool.c 333] -
Failed to start dependent service com.sap.portal.usermapping
Hi
I am trying to retrieve the User mapping information from my Webdynpro application. I added PORTAL:sap.com/com.sap.portal.usermapping to my service references in the web dynpro application. However, I am getting an error while deploying the application. The error message says
Failed to start dependent service ''com.sap.portal.usermapping'' of application ''local/materialtemplateapp''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I know this is a pretty old problem that many other Web Dynpro developers encountered. I searched a lot on the forums and SDN. There are similar posts but I didn't find solution. I would appreciate any help in fixing this problem.
ThanksHi,
Goto http://<servername>:<port>/webdynpro/welcome-->content Adminsitration
Now, expand sap.com and search for the usermapping service. Check what is the status of that particular service. If its in the stopped state then start it and try redeploying your application.
Regards,
Murtuza -
I was trying to update itunes on my computer that has windows vista. during the update I received an error message; so I uninstalled itunes and reinstalled it. the instatlation process stopped with this message: "Service 'Apple Mobile Device' failed to start. Verify thta you have sufficient priviledges to start system services." I have used an ipad 2 since 2011 and have never had a problem with my itunes account or my ipad until now.
What steps do I need to complete to get my itunes account up and running again?Hi Kayleenfromwi,
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying the steps in this article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Jstart.exe process in sap mmc is not getting started
Hi,
The jstart.exe process of sap mmc (management console/server) is not getting started.
The status for this process is "starting the processes". Need help!
The developer trace is as follows :
trc file: "dev_jstart.7668", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7668
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:03:13 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F Mon Oct 08 10:03:13 2012
F ********************************************************************************
F Java environment properties (C:\usr\sap\SV1\J02\work\jstart.jvm)
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 7652] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
F
F [Thr 7652] Mon Oct 08 10:03:14 2012
F [Thr 7652] *** LOG => connected to Enqueue Server.
F [Thr 7652] *** LOG => connected to Message Server.
F [Thr 7652] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 1.
F
F Mon Oct 08 10:03:15 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_deployment.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_deployment.out
F stderr : C:\usr\sap\SV1\J02\work\std_deployment.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Deploy_offline started with pid 7968
F ********************************************************************************
F [Thr 7652] *** LOG => Process deployment started (pid 7968).
F
F [Thr 7652] Mon Oct 08 10:03:19 2012
F [Thr 7652] *** LOG => Process deployment stopping (pid 7968).
F
F [Thr 6972] Mon Oct 08 10:03:19 2012
F [Thr 6972] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process deployment stopped (pid 7968).
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 1 completed.
F [Thr 7652] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 2.
F
F Mon Oct 08 10:03:20 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_bootstrap.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F stderr : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Instance_bootstrap started with pid 7952
F ********************************************************************************
F [Thr 7652] *** LOG => Process bootstrap started (pid 7952).
F
F [Thr 7652] Mon Oct 08 10:03:47 2012
F [Thr 7652] *** LOG => Process bootstrap running (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).
F
F [Thr 7652] Mon Oct 08 10:04:10 2012
F [Thr 7652] *** LOG => Process bootstrap stopping (pid 7952).
F
F [Thr 4436] Mon Oct 08 10:04:10 2012
F [Thr 4436] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process bootstrap stopped (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 2 completed.
F [Thr 7652] *** LOG => Starting run level 3.
F ********************************************************************************
F Java process [debugproxy] properties:
F section name : debugproxy
F config file : C:\usr\sap\SV1\J02\exe\dproxy.properties
F node name : Debug_Proxy
F home directory : C:\usr\sap\SV1\J02/j2ee/rdbg.proxy
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F ICM process [icm] properties:
F section name : icm
F config file : C:\usr\sap\SV1\J02\exe\icm.properties
F node name : ICM
F home directory : C:\usr\sap\SV1\J02\work
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F ********************************************************************************
F ********************************************************************************
F Java process [server0] properties:
F section name : ID24836450
F config file : C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F node name : server0
F home directory : .
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : true
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 0.
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\icman.EXE
F arg[ 1] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 2] = -nodeId=1
F arg[ 3] = -f
F arg[ 4] = C:\usr\sap\SV1\J02\work\\dev_icm
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_icm.out
F stderr : C:\usr\sap\SV1\J02\work\std_icm.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process ICM started with pid 7336
F ********************************************************************************
F [Thr 7652] *** LOG => Process icm started (pid 7336).
F
F [Thr 7652] Mon Oct 08 10:04:12 2012
F [Thr 7652] *** LOG => Process icm running (pid 7336).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 1.
F
F Mon Oct 08 10:04:16 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=2
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -DSAPINFO=SV1_02_server0
F arg[ 4] = -hostvm
F arg[ 5] = -nodeName=ID24836450
F arg[ 6] = -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F arg[ 7] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 8] = -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
F arg[ 9] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_server0.out
F stderr : C:\usr\sap\SV1\J02\work\std_server0.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process server0 started with pid 7616
F ********************************************************************************
F [Thr 7652] *** LOG => Process server0 started (pid 7616).Hi Ravi,
Thanks for your quick response.
Where do I find the default trace for this?
The server0 process status is "Waiting to start". The developer trace for server0 is as follows :
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7616
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:04:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 7280] MtxInit: 10002 0 2
I [Thr 7280] MPI: dynamic quotas disabled.
I [Thr 7280] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 7280] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 7280] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 7280] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7616
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 7364] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 7280] Mon Oct 08 12:28:13 2012
F [Thr 7280] *** LOG => Command STOP 0 {}.
F [Thr 7280] *** LOG => Result for STOP 0 {}: 0 ok, 00000000.
F
F [Thr 7280] Mon Oct 08 12:28:33 2012
F [Thr 7280] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:28:33 2012
J
J ================================================================================
F [Thr 7280] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 684] Mon Oct 08 12:28:33 2012
M [Thr 684] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 5508
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:28:34 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 500] MtxInit: 10002 0 2
I [Thr 500] MPI: dynamic quotas disabled.
I [Thr 500] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 500] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 500] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 500] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=5508
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4136] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 500] Mon Oct 08 12:29:02 2012
F [Thr 500] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:29:02 2012
J
J ================================================================================
F [Thr 500] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 5068] Mon Oct 08 12:29:02 2012
M [Thr 5068] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7704
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:29:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 4980] MtxInit: 10002 0 2
I [Thr 4980] MPI: dynamic quotas disabled.
I [Thr 4980] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 4980] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 4980] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 4980] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7704
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4736] *** LOG => SfCJavaVm: abort hook is called. -
"apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to do ? Ken
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
Jcontrol.exe in SAP MMC turns "GREY" after start.--- Urgent
Hi, I am facing one problem with SAP J2EE engine.
In SAP MMC all services are green, only "Jcontrol.exe" is Grey. I restarted the server several times but every time it starts and then just becomes "GREY" Below is the description of "Developer Trace" which I have copied from SAP MMC console.
Any help in this regards would be highly appreciated. It is urgent.
Thanks.
Ashish Patel.
JStartupStartJLaunch: program = D:\usr\sap\DNW\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = D:\usr\sap\DNW\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=D:\usr\sap\DNW\SYS\profile\DNW_JC00_dgntwas
-> arg[02] = -DSAPINFO=DNW_00_bootstrap
-> arg[03] = -file=D:\usr\sap\DNW\JC00\j2ee\cluster\instance.properties
-> arg[04] = -nodeName=bootstrap_ID3314950
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_3148
-> arg[07] = -jvmOutFile=D:\usr\sap\DNW\JC00\work\jvm_bootstrap_ID3314950.out
-> arg[08] = -stdOutFile=D:\usr\sap\DNW\JC00\work\std_bootstrap_ID3314950.out
-> arg[09] = -locOutFile=D:\usr\sap\DNW\JC00\work\dev_bootstrap_ID3314950
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=D:\usr\sap\DNW\SYS\profile\DNW_JC00_dgntwas
-> lib path = PATH=C:\j2sdk14209\jre\bin\server;C:\j2sdk14209\jre\bin;D:\usr\sap\Python\.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;D:\usr\sap\DNW\SCS01\exe;D:\usr\sap\DNW\JC00\exe;D:\usr\sap\DNW\SYS\exe\run
-> exe path = PATH=C:\j2sdk14209\bin;D:\usr\sap\DNW\JC00\j2ee\os_libs;D:\usr\sap\Python\.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;D:\usr\sap\DNW\SCS01\exe;D:\usr\sap\DNW\JC00\exe;D:\usr\sap\DNW\SYS\exe\run
[Thr 3152] Wed Aug 23 15:01:34 2006
[Thr 3152] *** ERROR => invalid return code of process [bootstrap_ID3314950] (exitcode=-2) [jstartxx.c 1433]
[Thr 3152] JControlExecuteBootstrap: error executing bootstrap node [bootstrap_ID3314950] (rc=-2)
[Thr 3152] JControlCloseProgram: started (exitcode = -2)
[Thr 3152] JControlCloseProgram: good bye... (exitcode=-2)
==========================================Hi,
Try this:
1.Stop all SAP instances
2.Stop the DB
3.Stop the listner
Logoff, and logon to the server as <sid>adm
then:
1.Start the listner (dos window ---> lsnrctl start)
2.Start the DB
3.Start the SAP Instances
It should start correctly now.
Kind Regards
Ian Henderson
Maybe you are looking for
-
SCOM 2012 R2 # Windows Server agents remain in pending management
Hi, First I installed one SCOM 2012 R2 Ops Manager. On same SCOM ops manager I added 3 windows server agents to monitor as below.. one 2008 R2 AD server one Lync 2013 FE server one Exchange server 2013 Now due to some technical issues later I had to
-
Icloud receiving emails with NO Sender, No Subject
Over the last few weeks my iCloud account has been displaying lots of messages with No Sender, No Subject in the header. The majority of these are automated email services like reservation acknowledgements etc. It is effecting all my devices that use
-
Hi, Is it possible to download a project from server to NWDS client? This is very helpfull if local pc crash... Thanks Andrea
-
HT4972 Cannot access mail since upgrading my ipad2 to ios6
I just upgraded my iPad 2 but now I cannot get any of my emails. Any ideas of what I can do to fix this?
-
SCCM Client not installing after imaging the computer. Where to start?
Hi, When I image or re-image a new machine, it will finish successfully but the client will be set to "NO" regardless of how many days I leave it there. We delete the machine name both on SCCM and Active Directory prior to any image deployment. Ther