Fail to burn, error code 4280(0x000010b8)

I try burning a CD with iTunes and it always fails. Here's the diagnostics.
Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
Dell Inc. XPS M1530
iTunes 8.1.0.52
QuickTime 7.6
FairPlay 1.2.12
iPod Updater Library 8.1d19
CD Driver 2.1.0.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.4.0.27
Apple Mobile Device Driver 1.40.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 80A4B65BE7548CAF
Current user is an administrator.
The current local date and time is 2009-03-26 14:34:40.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8600M GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.0),
E: MATSHITA DVD+-RW UJ-875S, Rev D200
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 24.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: MATSHITA DVD+-RW UJ-875S on CDR media at speed 8X.

Thank you. This has worked, but I don't know why as it isn't anything I didn't do the last time. What a difference a day makes.
Once again, thank you for taking the time to help.
Jim

Similar Messages

Can't burn error code 4280

I haven't been able to burn cds ever since the new update from ITunes. I have tried troubleshooting using steps from the support on this website. However, that was primarily for a Sony drive. I happen to have an Acer 5100-3583 Model with a MATSHITA DVD-RAM UJ-8505. I hate not being able to burn cds, please help if you can.

the perfect solution it to get a mac
just joking... have you tried burning cds in other programs? It could be the driver...
Kisses
CV

CD burn had error code 4280, HELP!!!

I installed the latest version of iTunes, but as many other postings I've read, I have not been able to successfully burn a CD with iTunes since the installation. Every time I get the message, "The attempt to burn a disc failed. An unknown error occurred (4280)." I have used Device Manager in the Control Panel to try and update the driver for the CD-ROM, but Windows says it cannot find a better driver than the one I have installed. I also ran CD Diagnostics in the iTunes help menu and the text is attached below:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
VIA Technologies, Inc. KM266A-8235
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: S3 Graphics Inc. Savage4\S3 Compatible Display Adapter
IDE\DiskST3120026A_____________________________8.01___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomCD-ROMCMD5X11__________________________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTDKCDRW121032A_________________________1.00___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: CD-ROM CMD5X11, Rev 1.06
Drive is empty.
E: TDK CDRW121032A, Rev 1.00
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TDK CDRW121032A on CDR media at speed 12X.
PLEASE HELP ME!!!!!!!!!!!!!
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001

bump2.

CD Burning error sometimes 4280 sometimes 4261

Hiya, I've recently started getting problems burning, it'll start, check the playlist, then say it's starting to write, and then it'll just cancel and eject the disc
Here's the diagnostics
ATI MOBILITY RADEON X700
Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Connected Device Information:
DiskDrive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
CDROM, MATSHITA UJ-845D, Bus Type ATA, Bus Address [1,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: MATSHITA UJ-845D, Rev D100
Audio CD in drive.
Found 1 songs on CD, playing time 03:31 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 24.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: MATSHITA UJ-845D on CDR media at speed 8X.
Thanks
Barry

I'm having exactly the same problem with 4450 & 4850 errors, using compatible hardware and several different brands of blank media. I've tried uninstalling and reinstalling iTunes and made sure my drive's drivers are current. It seems that a number of users are experiencing the same problem, and I'm anxious to see an explanation and solution posted.

Does ANYONE know what error code 4280 is referring too?

I have asked this same question 4x this will be my 5th time. I keep getting an error code 4280 and I have no idea what it is or how to fix it. Someone.... anyone please help.
Here is the diagnostic code
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 061 DQ176A-ABA a430n
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2k (6.0.0.1), PFC (2.5.0.204), MXLW2K (1.1.0.121), AFS2K (3.1.21.0), PXHELP20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX 440 with AGP8X \GeForce4 MX 440 with AGP8X
IDE\DiskMaxtor6Y160P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomASUSCD-S480/AH_________________________0.85___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHPDVD_Writer_300n______________________3.10___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HP DVD Writer 300n, Rev 3.10
Drive is empty.
F: ASUS CD-S480/AH, Rev 0.85
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 72:46 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: HP DVD Writer 300n on CDR media at speed 16X.

Here is a thred that explains exactly what this error code is, and the steps others have takin to fix it. Just follow Toonz suggestions, hes very good at nailing these CD errors in iTUnes
http://discussions.apple.com/thread.jspa?messageID=802204&#802204

Error Code 4280

I have spent the day researching this problem.
I have a Dell Dimension 4550 computer with a _NEC CD-RW NR 9300A Drive. I suddenly began having a problem burning discs.
As soon as it starts to write to the disc I get the error message "An Unknown Error has occured (4280)
I have tested the drive to make sure it is working, I have attempted to adjust the speed and tried a number of other fixes for different drives suggested on the internet to no avail.
If anyone could help me with this I would greatly appreciate it.

Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 061 DQ176A-ABA a430n
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2k (6.0.0.1), PFC (2.5.0.204), MXLW2K (1.1.0.121), AFS2K (3.1.21.0), PXHELP20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX 440 with AGP8X \GeForce4 MX 440 with AGP8X
IDE\DiskMaxtor6Y160P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomASUSCD-S480/AH_________________________0.85___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHPDVD_Writer_300n______________________3.10___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HP DVD Writer 300n, Rev 3.10
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 24.
The drive CDRW speeds are: 4 8 12 24.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
F: ASUS CD-S480/AH, Rev 0.85
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: HP DVD Writer 300n on CDR media at speed 24X.

When I try to burn cd's I get the message 'cancelling disc burn' and an error code '4280', also I can't burn cd's on WMP all this has started after I upgraded, any ideas?

Since I upgraded to the latest version of itunes I can't burn discs, I just get the message 'cancelling burn' with error code '4280', it was working fine before I upgraded, I am using Windows XP, any ideas?

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

Error code 4280 when I attempt to burn cd

Why do I get error code 4280 when I try to burn c cd from my burn list and how can I accomplish my task?!

Joe,
Check out these links: OS X Mountain Lion: If an error message appears while you’re burning a CD or DVD
and OS X Mountain Lion: If you can’t eject a disk
But, you'd better ask this question again in the forum for your mac. I don't know which type of Mac you have. Pick the link from this list.
iMac (Intel)
Mac mini
Mac Pro
Power Mac
iMac (PPC)
eMac
MacBook Pro
MacBook Air
iBook
MacBook
PowerBook

I am trying to burn a cd from itunes and I keep getting error code 4280. I cant even burn cd that old cds that I loaded to my library.

I keep getting error code 4280 when trying to burn a cd from downloaded itunes songs. I can't even burn a cd from my own cds that I loaded to my library. Is there a fix for this?

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

The system failed to merge, error code : General Access denied

The system failed to merge, error code : General Access denied. Could anyone help me on this

Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
 Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
 If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

I cannot get Elemtnts 13.1 to download completely. I have three different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210.

I cannot get Elements 13.1 to download completely. I have 3 different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210. I would either like to get the product downloaded or eliminate the constant attempt which just ties up my computer.

You could try the direct download links here
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
And here is some info on that error code
Error U44M1I210 | Install updates

Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspaces

during install OCS Infrastructure DB OCS have error:
... processed key-value: logfile=/oracle/product/dbocs/workspaces/logs/cw_config_backend.log
... processed key-value: action=setup_backend
... processed key-value: oh=/oracle/product/dbocs
... processed key-value: oid=oid.domain
... processed key-value: oid_port=389
... processed key-value: oid_user_dn=cn=orcladmin
... processed key-value: oid_passwd=xxxxxx
... processed key-value: db_sn=ocs.domain
... processed key-value: dba_user=sys
... processed key-value: dba_passwd=xxxxxx
... processed key-value: cw_db_passwd=xxxxxx
Attempting to set logfile to: /oracle/product/dbocs/workspaces/logs/cw_config_backend.log
Processed oh=/oracle/product/dbocs
BACKEND installation ...
... Trying to lookup database dn
... Obtain OID connection
...... Can not obtain OID ssl port.
...... OID port = "389"
...... Trying to establish a non-ssl connection. OID host "oid.domain", OID port "389", OID user dn "cn=orcladmin".
... OID connection created.
...... You must specify either db_dn or db_sn.
...... ldap search filter "(&(objectclass=orcldbserver)(orcldbglobalname=ocs.domain))"
...... Succesfully located database dn "cn=ocs,cn=OracleContext".
...... Database dn = "cn=ocs,cn=OracleContext"
... Validating existence and version of CW schema: "CWSYS" in database: "cn=ocs,cn=OracleContext".
... Obtain JDBC connect string
... JDBC connect string = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
...derived: "jdbc_str=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Unlocking schema and setting passwd: "CWSYS/xxxxxx".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
... Checking Workspaces container.
... Container "cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext" already exist.
... Finish checking Workspaces container.
... Trying to create backend application entity in OID
...... Database dn = "cn=ocs,cn=OracleContext"
...... Backend entity name = "ocs"
...... Backend entity dn = "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
... Backend entries already exist. Cleanup old entries.
deregisterProvisioningListener ...
app dn = orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext
subscriber = dc=domain,dc=com
... Trying to remove entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext".
... Deleting "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
Adding Workspaces application entity to: cn=Service Registry Viewers,cn=Groups,cn=OracleContext
Adding Workspaces application entity to: cn=Service Registry Admins,cn=Groups,cn=OracleContext
... Insufficient privilege to create application entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext". Please check the user DN and password.
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
oracle.workspaces.install.CwCAException: Error while executing action: "setup_backend"
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]
at oracle.workspaces.install.CwConfig.run(CwConfig.java:639)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
... 1 more
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
What should i do?
help.
Thanks

closed
Re: Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspac

After re-inistalling windows 7 ultimate the validation process fails and reports error code 0xC004E003

Hi I have just reinstalled Win 7 Ultimate and the validation has failed due to error code 0xC004E003. all of the windows updates have been complete.
when I run slui 4 and I do not get an option to activate by phone and I have tried running the Command prompt "cscript %windir%\System32\slmgr.vbs /ilc %windir%\System32\licensing\ppdlic\Security-Licensing-SLC-ppdlic.xrm-ms" which errored
out
Bellow is the MGADiag tool output
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-X92GV-V7DCV-P4K27
Windows Product Key Hash: aU2z1/fnhnLHmhBm699qYZT2E6s=
Windows Product ID: 00426-OEM-8992662-00400
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {58492533-DAC0-4F4B-8CB4-7C2572CD6AD2}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{58492533-DAC0-4F4B-8CB4-7C2572CD6AD2}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-P4K27</PKey><PID>00426-OEM-8992662-00400</PID><PIDType>2</PIDType><SID>S-1-5-21-3905371182-2698555194-554347162</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E6520</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A18</Version><SMBIOSVersion major="2" minor="6"/><Date>20130628000000.000000+000</Date></BIOS><HWID>A05B3107018400FE</HWID><UserLCID>0809</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>GMT
Standard Time(GMT+00:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>CBX3
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600400-02-2057-7601.0000-0452014
Installation ID: 015022194896715926564380852615762536846771772141316646
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: P4K27
License Status: Initial grace period
Time remaining: 37860 minute(s) (26 day(s))
Remaining Windows rearm count: 3
Trusted time: 14/02/2014 09:02:26
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 2:14:2014 09:00
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NAAAAAEAAQABAAIAAAACAAAABAABAAEAHKLYsxuJLAK4jqbIhjvuI1YXxgem9B73it4ucw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL CBX3
FACP DELL CBX3
HPET A M I PCHHPET
BOOT DELL CBX3
MCFG DELL SNDYBRDG
TCPA
SSDT DELLTP TPM
SSDT DELLTP TPM
SSDT DELLTP TPM
DMAR INTEL SNB
SLIC DELL CBX3
SSDT DELLTP TPM

Hi,
The error code 0xC004E003 means that the Software Licensing Service reported that license evaluation failed.
We may need to involve the phone activation center and check if they can resolve the issue:
How to contact a Microsoft Product Activation Center by telephone
http://support.microsoft.com/kb/950929/
Meanwhile, you should post your question in the forum mentioned by Kamin of Ressik. They are the most knowledgeable about the topic.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

Fail to burn, error code 4280(0x000010b8)

Similar Messages

Maybe you are looking for