Fail to connect in the HP Web Service

Hey guys, 
I just got one HP Laserjet CP1025nw and wanna set up the wireless eprint on my MAC. Now I am at the stage of using HP Web Service to enable the printer. The problem is that when I clicked the HP Web Service tab and and clicked "Enable" button, after 5 seconds it simply showed "connection error, check internet connection".  I have checked and my MAC and the printer are in the same wifi environment and the IP address is the same as the configuration paper. I have no idea what to do in the next step. I don't think the printer is too far to have a good connection as the signal shows approximately 4 boxes out of 5. 
I will be appreciated if someone could help me out.
Thanks

Hi @lmbo
Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a static IP address for the printer. I have included the Printer Does Not Maintain Wireless Connection document. In the Windows section, the steps for setting a static ip address is Solution Three. In the Mac section, it is Solution Two. For the DNS servers, please use 8.8.8.8 for the Manual Alternate DNS server and 8.8.4.4 for the Alternate Preferred DNS server.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • Test Connection fails for VC system of type Web Service

    Hi All
    I ve created a VC system of the type Web Service in Portal. In this VC system, I have given Url of the Enterprise Service that I want to use in VC.
    (for eg: http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800)
    In the next step, I did user mapping for the VC user that will be consuming this Enterprise Service.
    The system was created successfully but when I did ‘Connection Tests’ , I got the following exception:
    “Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
    Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly”
    Do I need to do any more configurations before I can use such ES portal system in my VC work studio ?
    I understand that I have provided little information about the exception thrown by Portal.
    I kindly request you to feel free in asking any other details about the same.
    Regards
    Kapil S Kamble

    Hi Natty
    thanks for your immediate reply.
    I followed your instructions and created iView of the type URL and set the fetch mode property to 'server side' as told.
    Initially, I gave 'http://www.sap.com' as the Url and I was successful in opening the site.
    Later, when I gave Enterprise Service url and tried to preview the iView, I got the following exception:
    *'http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800
    Error # 401'*
    I ll need to give username and password. But how do i give them as parameters?
    Please note, these parameteres are appended to the Url. So, I fear that if url of Enterprise service is changed, then it wont open.
    what do you think ?
    Kapil

  • "Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

    Hello,
    I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
    I'm running Windows Server 2008 R2,
    Any ideas?

    Hi saeedawadx,
    Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
    or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
    The following related article will give more helpful tips,
    The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
    http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
    Trouble Connecting to Cluster Nodes? Check WMI!
    http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Connect to SharePoint web service using the XML / Web Service connector

    Hi experts,
    I am currently trying to display my SharePoint list in Crystal Report. Therefore my plan is to use a SharePoint web service to get the data and paste them to the Crystal Report.
    Is it possible to use the "XML and Web services" connector of the Crystal Reports database expert?
    When I enter the web service URL, for instance:
    https://[url]/_vti_bin/lists.asmx?wsdl
    and click next... I have to enter the web service credentials.
    On the next page I have to enter Service, Port and Method.
    Do I have to enter the service URL again here?
    What If, there is no port? Can I leave that field empty?
    I know the methods, but where can I add the mandatory parameters?
    Thanks for any helps and comments!
    Sebastian

    Hi Ananth,
    thank you, but this document does not help at all.
    We are using Crystal Reports 2008 SP2.
    We want to use the Web Service Connector.
    What I need is more informationen about the Web service connect. For example - the connection in Microsoft InfoPath is much easier - there I don't have to enter a port and can choose the methods from a list.
    Is it possible to use the Crystal web service connector for MS SharePoint Webservices?
    Or must I use the Crystal SDK to carry out a connection?
    Best regards,
    Sebastian

  • Addon has failed to connect to the DI API. Service Not found

    Hi
    I've upgraded database B1 8.8 SP0 PL11 to B1 8.8 SP0 PL15.
    Addon was complied on B1 8.8. SP0 PL11 envrionment.
    I've error message when I started addon.
    Addon_Name addon has failed to connect to the DI API.
    Error Details:
    Service not found.
    DI API was uninstalled and re installed.
    And I deleted SM_OBS_DLL directory.
    But I can not resolve this issue.
    Please help me,
    Joanne

    Hi Joanne,
    I had exactly the same problem with patch 15 after an upgrade from 8.8 patch 13. The SBO client didn't automatically update so I had to use Add/Remove programs to remove the old client and DI API and then the new client install failed from the B1_SHR folder with a 1158 error (no description).
    What I did to correct it was install the DI API from the <servername>\B1_SHR\B1DIAPI folder and then run the client install afterwards. This time the client install worked fine and I can run addons that use the DI API. I think there was some registry entry issues, maybe with the upgrader or the client installer.
    Kind Regards,
    Owen

  • 8.0.1 fails to connect to the web AT ALL when Internet Explorer can

    8.0.1 has failed to connect to the web persistently since updating to this new version - Internet Explorer has no problem at present.

    See http://kb.mozillazine.org/Firewalls

  • SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

    SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
    I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
    When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
    Site Mailbox
    We are having trouble connecting to Exchange Server
    The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
    Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10 
    ULS Log (503 error)
    Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c  client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584  X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com  X-FEServer: DEVNAABCD01B
     Content-Length: 0  Cache-Control: private  Date: Tue, 03 Feb 2015 18:53:40 GMT  Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly  Server: Microsoft-IIS/8.5  X-AspNet-Version:
    4.0.30319  X-Powered-By: ASP.NET    
    742fe69c-ef5a-e084-ca05-6098c759c584
    if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.  Do you guys have any idea on this?  (I verified
    the same using fiddler, it is failing right at autodiscover.svc call.)
    I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
    I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
    let me know if you guys have any ideas.
    Thanks.

    Thanks for the Response Raj.
    I already followed the same instructions in the Links.
    When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
    X-CalculatedBETarget
    supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
    Let me know if you have any suggestions?

  • SSRS: Failure sending mail: The transport failed to connect to the server.

    I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
    I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
    Now in SSRS I am getting this message:
    Failure sending mail: The transport failed to connect to the server.
    I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
    I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
    I even approached our senior dba about it and he has never seen this happen.
    Has anyone else experienced this issue?
    Thank you,
    Jessica

    Thank you JJordheim.
    IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
    SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
    My rsreportserver.config file looks fine, or at least it does to me. Posted below:
    <Configuration>
     <Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
    AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
    5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
    5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
    kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
    ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
    juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
    I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
    RNs8QwPFYNIXyq6vDD0=</Dsn>
     <ConnectionType>Default</ConnectionType>
     <LogonUser></LogonUser>
     <LogonDomain></LogonDomain>
     <LogonCred></LogonCred>
     <InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
     <InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
     <Add Key="SecureConnectionLevel" Value="0"/>
     <Add Key="CleanupCycleMinutes" Value="10"/>
     <Add Key="MaxActiveReqForOneUser" Value="20"/>
     <Add Key="DatabaseQueryTimeout" Value="120"/>
     <Add Key="RunningRequestsScavengerCycle" Value="60"/>
     <Add Key="RunningRequestsDbCycle" Value="60"/>
     <Add Key="RunningRequestsAge" Value="30"/>
     <Add Key="MaxScheduleWait" Value="5"/>
     <Add Key="DisplayErrorLink" Value="true"/>
     <Add Key="WebServiceUseFileShareStorage" Value="false"/>
     <!--  <Add Key="ProcessTimeout" Value="150" /> -->
     <!--  <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
     <!--  <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
     <!--  <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
     <!--  <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
     <Add Key="WatsonFlags" Value="0x0428"/>
     <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
     <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
     <URLReservations>
      <Application>
       <Name>ReportServerWebService</Name>
       <VirtualDirectory>ReportServer</VirtualDirectory>
       <URLs>
        <URL>
         <UrlString>http://+:80</UrlString>
         <AccountSid>S-1-5-19</AccountSid>
         <AccountName>NT Authority\LocalService</AccountName>
        </URL>
       </URLs>
      </Application>
      <Application>
       <Name>ReportManager</Name>
       <VirtualDirectory>Reports</VirtualDirectory>
       <URLs>
        <URL>
         <UrlString>http://+:80</UrlString>
         <AccountSid>S-1-5-19</AccountSid>
         <AccountName>NT Authority\LocalService</AccountName>
        </URL>
       </URLs>
      </Application>
     </URLReservations>
     <Authentication>
      <AuthenticationTypes>
       <RSWindowsNegotiate/>
       <RSWindowsNTLM/>
      </AuthenticationTypes>
      <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
      <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
      <EnableAuthPersistence>true</EnableAuthPersistence>
     </Authentication>
     <Service>
      <IsSchedulingService>True</IsSchedulingService>
      <IsNotificationService>True</IsNotificationService>
      <IsEventService>True</IsEventService>
      <PollingInterval>10</PollingInterval>
      <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
      <MemorySafetyMargin>80</MemorySafetyMargin>
      <MemoryThreshold>90</MemoryThreshold>
      <RecycleTime>720</RecycleTime>
      <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
      <MaxQueueThreads>0</MaxQueueThreads>
      <UrlRoot>http://abraham/Reports</UrlRoot>
      <UnattendedExecutionAccount>
       <UserName></UserName>
       <Password></Password>
       <Domain></Domain>
      </UnattendedExecutionAccount>
      <PolicyLevel>rssrvpolicy.config</PolicyLevel>
      <IsWebServiceEnabled>True</IsWebServiceEnabled>
      <IsReportManagerEnabled>True</IsReportManagerEnabled>
      <FileShareStorageLocation>
       <Path>
       </Path>
      </FileShareStorageLocation>
     </Service>
     <UI>
      <ReportServerUrl>
      </ReportServerUrl>
      <PageCountMode>Estimate</PageCountMode>
     </UI>
     <Extensions>
      <Delivery>
       <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
        <MaxRetries>3</MaxRetries>
        <SecondsBeforeRetry>900</SecondsBeforeRetry>
        <Configuration>
         <FileShareConfiguration>
          <ExcludedRenderFormats>
           <RenderingExtension>HTMLOWC</RenderingExtension>
           <RenderingExtension>NULL</RenderingExtension>
           <RenderingExtension>RGDI</RenderingExtension>
          </ExcludedRenderFormats>
         </FileShareConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
        <MaxRetries>3</MaxRetries>
        <SecondsBeforeRetry>900</SecondsBeforeRetry>
        <Configuration>
         <RSEmailDPConfiguration>
          <SMTPServer>192.168.11.210</SMTPServer>
          <SMTPServerPort></SMTPServerPort>
          <SMTPAccountName>
          </SMTPAccountName>
          <SMTPConnectionTimeout>
          </SMTPConnectionTimeout>
          <SMTPServerPickupDirectory>
          </SMTPServerPickupDirectory>
          <SMTPUseSSL>
          </SMTPUseSSL>
          <SendUsing>2</SendUsing>
          <SMTPAuthenticate>
          </SMTPAuthenticate>
          <From>[email protected]</From>
          <EmbeddedRenderFormats>
           <RenderingExtension>MHTML</RenderingExtension>
          </EmbeddedRenderFormats>
          <PrivilegedUserRenderFormats>
          </PrivilegedUserRenderFormats>
          <ExcludedRenderFormats>
           <RenderingExtension>HTMLOWC</RenderingExtension>
           <RenderingExtension>NULL</RenderingExtension>
           <RenderingExtension>RGDI</RenderingExtension>
          </ExcludedRenderFormats>
          <SendEmailToUserAlias>True</SendEmailToUserAlias>
          <DefaultHostName>
          </DefaultHostName>
          <PermittedHosts>
          </PermittedHosts>
         </RSEmailDPConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
        <MaxRetries>3</MaxRetries>
        <SecondsBeforeRetry>900</SecondsBeforeRetry>
        <Configuration>
         <DocumentLibraryConfiguration>
          <ExcludedRenderFormats>
           <RenderingExtension>HTMLOWC</RenderingExtension>
           <RenderingExtension>NULL</RenderingExtension>
           <RenderingExtension>RGDI</RenderingExtension>
          </ExcludedRenderFormats>
         </DocumentLibraryConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
      </Delivery>
      <DeliveryUI>
       <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
        <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
        <Configuration>
         <RSEmailDPConfiguration>
          <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
         </RSEmailDPConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
      </DeliveryUI>
      <Render>
       <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
       <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
       <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
       <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
       <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
       <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
       <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
       <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
       <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
       <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
       <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
       <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
      </Render>
      <Data>
       <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
       <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
       <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
      </Data>
      <SemanticQuery>
       <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>False</EnableMathOpCasting>
        </Configuration>
       </Extension>
       <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>False</EnableMathOpCasting>
        </Configuration>
       </Extension>
       <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>False</EnableMathOpCasting>
        </Configuration>
       </Extension>
       <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>True</EnableMathOpCasting>
         <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
         <EnableUnistr>False</EnableUnistr>
         <DisableTSTruncation>False</DisableTSTruncation>
        </Configuration>
       </Extension>
       <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>True</EnableMathOpCasting>
         <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
        </Configuration>
       </Extension>
       <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
      </SemanticQuery>
      <ModelGeneration>
       <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
      </ModelGeneration>
      <Security>
       <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
      </Security>
      <Authentication>
       <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
      </Authentication>
      <EventProcessing>
       <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
        <Event>
         <Type>ReportHistorySnapshotCreated</Type>
        </Event>
       </Extension>
       <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
        <Event>
         <Type>TimedSubscription</Type>
        </Event>
       </Extension>
       <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
        <Event>
         <Type>RefreshCache</Type>
        </Event>
       </Extension>
       <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
        <Event>
         <Type>SnapshotUpdated</Type>
        </Event>
       </Extension>
      </EventProcessing>
     </Extensions>
     <MapTileServerConfiguration>
      <MaxConnections>2</MaxConnections>
      <Timeout>10</Timeout>
      <AppID>(Default)</AppID>
      <CacheLevel>Default</CacheLevel>
     </MapTileServerConfiguration>
    </Configuration>

  • HELP: CameraWindow DC "Failed To Connect To The Server"

    Just purchased a Powershot SX280 HS.  It is fantastic little camera.  I have been a Nikon guy for years, but this camera really has changed my mind.  I am having a challenge however.  I am unable to complete the camera setup through CameraWindow DC, as every time I try to "Set Up Web Services," and Log In, I get the message "Failed To Connect To The Server."  I am completely registered, and can log in and access Canon Image Gateway, as well as upload content.  WIFi tests out good, and I am able to connect from camera to both my iPhone and iPod.  Do you think the CIG server may be down on their end?  I am simply trying to complete setup so that I can get the Fscebook and Twitter interface on the Powershot.  Thanks.
    Solved!
    Go to Solution.

    I had the same problem with my ELPH 330 HS and called customer service yesterday. Here's what needed to happen to fix it:
    1) In the "Canon" folder under "Program Files" that is created when you install the software, there is a subfolder called "WirelessCameraConnectionSetting". Within that folder is an exe file called "WirelessCameraConnectionSetting.exe".  Double click it and go through prompts, if any.
    2) Make sure you've already created a user account on Canon's site.
    3) Double-check that your camera is listed as registered under your user profile. I had registered my camera before creating my user account, and so even though I had received an email congratulating me on registering it, the camera was not associated with my user account and it needs to be in order for the "setup web access" through CameraWindow to work.  In fact, there's an "additional features" selection called something like "use Canon iMAGE Gateway" that needs to be checked on while registering so that you have established the camera and the ability to use it via the web with your user profile.
    Once I'd done all that, it worked just fine. I responded about all this in my customer service feedback survey that they emailed me last night. So hopefully, they'll provide a packaging blow-in or a link on their site. But since I found this forum post by searching CameraWindow Failed To Connect To Server, I'm hoping that if nothing else, others will find this before needing to call themselves.
    Hope it helped!

  • My iphone 5 won't make a call when i fail to connect to the internet via 3g

    My iphone 5 won't call when i fail to connect to the internet via 3g.
    At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
    (note: when the 3g connection does work, the phone has absolutely no problem calling people)
    Anyone had this problem?
    Even better has anyone got a solution?
    Thanks,
    Nick.

    Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

  • Connecting to a SOAP web Service

    For my sapp I want to connect to a simple web service . This web service has Several functions .They each accept some arguments and return End result.. The web service is being activated but it always returns an answer of zero (NULL ) which makes me suspect the parameters aren't being passed in correctly. I'm using Xcode 3.1 on Leopard.
    anyone give some sugesstion.
    Thanks
    Hariharan

    oh it didn't show my WSDL/Schema...
    Hopefully this works:
    <wsdl:operation name="getBooksByID">
          <wsdl:input message="tns:getBooksByIDRequest">
        </wsdl:input>
          <wsdl:output message="tns:getBooksByIDResponse">
        </wsdl:output>
          <wsdl:fault message="tns:RequestFault" name="RequestFault">
        </wsdl:fault>
        </wsdl:operation>
    Request
    <xsd:complexType name="BookParam">
    <xsd:sequence>
    <xsd:element maxOccurs="1" minOccurs="1" name="BookID" type="xsd:int"/>
    </xsd:sequence>
    </xsd:complexType>
    Response
    <xsd:complexType name="BookSummary">
    <xsd:sequence>
    <xsd:element name="BookID" type="xsd:int"/>
    <xsd:element name="BookLocation" type="xsd:string"/>
    <xsd:element name="BookName" type="xsd:string"/>
    <xsd:element name="BookPrice" type="xsd:int"/>
    <xsd:element name="BookCost" type="xsd:int"/>
    </xsd:sequence>
    </xsd:complexType>

  • "unable to connect to the data access service" installing report server

    Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012.  Management server and operations console on one, and SQL, web console, and reporting server on the other.  When I get to the web console and reporting server install, and
    the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
    "Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."  
    Here is the setup log error:  
    "Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
    too long."
    I don't see the "Data Access" service in services on either server.  I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
    http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
    Everything seems to be working until I get to this point. 
    Thank you for any help you can provide,
    Dan

    Hi Tom,
    1. Did the setup complete successfully on the MS and Console server?
    >>>Yes, without issue
    2. You do not see the service "System Center Data Access Service"
    >>>I do indeed see it on the MS and Console server, it is set to Auto and running.  (I also tried rebooting this server and retried, no help)
    3. Is the Windows Firewall enabled?
    >>>It has symantec endpoint protection.  I disabled symantec completely on both servers and retried, no help.
    Thx,
    Dan

  • J2EE fails to connect to the ABAP backend system

    We have J2EE 640 Sp16 Abap+Java. As we configured this node in high-availability, we applied note Oss 757692 to the J2EE.
    Anyway the J2EE does not come up.
    Into the std_server0.out we see the following:
      Service dbpool started. (1503 ms).
    May 25, 2006 3:44:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_25] Fatal: User Management Engine
    (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connectio
    n data are correct and the backend system is available. Error message: "User not authorized (session closed)". Connection data (
    obtained from properties of UME service in section "ume.r3.connection.master.": "{
      passwd=********
      receiverid=master
      sysnr=00
      client=100
      poolmaxsize=10
      user=SAPJSF
      receiverid_guest=master
      ashost=sap3
      snc_mode=0
    We double checked the set6tings of note 757692 and all of them seems to be correct.
    We changed also the psw of SAPJSF in the ABAP stack and also in Global server configuration by mean of the configtool for the ume.r3.connection.master.psswd item
    Neverthless we continue to recive this error.
    What's wrong ?
    Regards

    Could it be because you tried to do this in an AS Java + AS ABAP installation? The note 757692 says quite distinctly, "This note covers the procedure for the j2ee engine only!" The statement does not make it clear if this note refers to only a standalone AS Java.
    My saying so is not very helpful, but the note also goes on to say, "Should you wish to change the host name of a server in a test !!! !!! system, you should do so only with the assistance of an SAP!!! !!! consultant.!!!

  • Unable to connect to the Data Access service for this management server

    Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
    with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
     Install was failing on selecting the management server. Research led me to
    Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
    >setspn -l domain\scom.mgmt
    Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
    MSOMSdkSvc/SCOM-MGMT1
    MSOMSdkSvc/SCOM-MGMT1.domain.net
    MSOMSdkSvc/SCOM-MGMT2
    MSOMSdkSvc/SCOM-MGMT2.domain.net
    >setspn -l domain\scom-mgmt1
    Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
    MSOMHSvc/SCOM-MGMT1.domain.net
    TERMSRV/SCOM-MGMT1.domain.net
    WSMAN/SCOM-MGMT1.domain.net
    RestrictedKrbHost/SCOM-MGMT1.domain.net
    HOST/SCOM-MGMT1.domain.net
    MSOMHSvc/SCOM-MGMT1
    TERMSRV/SCOM-MGMT1
    WSMAN/SCOM-MGMT1
    RestrictedKrbHost/SCOM-MGMT1
    HOST/SCOM-MGMT1
    >setspn -l domain\scom-mgmt2
    Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
    MSOMHSvc/ SCOM-MGMT2.domain.net
    MSOMHSvc/ SCOM-MGMT2
    WSMAN/SCOM-MGMT2.domain.net
    WSMAN/SCOM-MGMT2
            TERMSRV/SCOM-MGMT2.domain.net
    TERMSRV/SCOM-MGMT2
    RestrictedKrbHost/SCOM-MGMT2
    HOST/CHH-SCOM-MGMT2
    RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
    HOST/CHH-SCOM-MGMT2.osi-asp.net
    >setspn -l domain\scom-ssrs
    Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
        WSMAN/SCOM-SSRS
    WSMAN/SCOM-SSRS.domain.net
    MSSQLSvc/SCOM-SSRS.domain.net
    MSSQLSvc/SCOM-SSRS.domain.net:1433
        TERMSRV/SCOM-SSRS.domain.net
    TERMSRV/SCOM-SSRS
    RestrictedKrbHost/SCOM-SSRS
      HOST/SCOM-SSRS
    RestrictedKrbHost/SCOM-SSRS.domain.net
    HOST/SCOM-SSRS.domain.net
    When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
    all the same version”.
    OpsMgrSetupWizard.log states…
    Info:     
    :Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
    too long.
    Info:     
    :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
    managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
    When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
    Bob

    Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
    This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
    /DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
    When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
    Problem signature:
    Problem Event Name:                       
    CLR20r3
    Problem Signature 01:                      
    setupchainerui.exe
    Problem Signature 02:                      
    7.0.5000.0
    Problem Signature 03:                      
    522a5b85
    Problem Signature 04:                      
    mscorlib
    Problem Signature 05:                      
    4.0.0.0
    Problem Signature 06:                      
    53b4fc1e
    Problem Signature 07:                      
    e4d
    Problem Signature 08:                      
    5a
    Problem Signature 09:                      
    System.FormatException
    OS Version:                                         
    6.1.7601.2.1.0.274.10
    Locale ID:                                            
    1033
    Additional Information 1:                 
    4911
    Additional Information 2:                 
    49111a576c61a461b7f2900e4224563c
    Additional Information 3:                 
    a1e6
    Additional Information 4:                 
    a1e62e9c159c1d7601a31ccff83dbf94
    App Event Log:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
    <EventRecordID>4999</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
    Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
    </EventData>
    </Event>
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
    <EventRecordID>5000</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>SetupChainerUI.exe</Data>
    <Data>7.1.10226.0</Data>
    <Data>522a5b85</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.1.7601.18409</Data>
    <Data>5315a05a</Data>
    <Data>e0434352</Data>
    <Data>000000000000940d</Data>
    <Data>a64</Data>
    <Data>01d03bf626a03a7a</Data>
    <Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
    </EventData>
    </Event>
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
    <EventRecordID>5001</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data />
    <Data>0</Data>
    <Data>CLR20r3</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>setupchainerui.exe</Data>
    <Data>7.0.5000.0</Data>
    <Data>522a5b85</Data>
    <Data>mscorlib</Data>
    <Data>4.0.0.0</Data>
    <Data>53b4fc1e</Data>
    <Data>e4d</Data>
    <Data>5a</Data>
    <Data>System.FormatException</Data>
    <Data />
    <Data />
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
    <Data />
    <Data>0</Data>
    <Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
    <Data>0</Data>
    </EventData>
    </Event>
    OpsMgrSetupWizard.log
    [13:48:16]:          
    Error:     :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
    [13:48:16]:          
    Error:     :StackTrace:  
    at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
       at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
       at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
       at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
    Any ideas? I feel like I’m just going in circles…Bob

  • Delayed response while calling the process web service

    I have four managed servers in a cluster and the ip addresses are
    managed_server_1 -20.20.40.21
    managed_server_2 -20.20.40.22
    managed_server_3 -140.20.40.23
    managed_server_4 -140.20.40.24
    The admin server is on 20.20.40.21
    I start the managed server from command prompt using the commant
    ./startManagedWeblogic {name of the managed server} {admin console url} ie
    i start managed_server_1 from 20.20.40.21 unix box by going to {weblogic installation}\bin
    and running the following command (we have some issues with the node manager so have been using this
    method)
    ./startManagedWeblogic managed_server_1 http://20.20.40.21:17003
    similarly i start the other servers from their respestive unix boxes
    managed_server_2 from the 20.20.40.22 unix box using the command ./startManagedWeblogic managed_server_2 http://20.20.40.21:17003
    managed_server_3 from the 140.20.40.23 unix box using the command ./startManagedWeblogic managed_server_3 http://20.20.40.21:17003
    managed_server_4 from the 140.20.40.24 unix box using the command ./startManagedWeblogic managed_server_4 http://20.20.40.21:17003
    all these servers are in the cluster named BPM_cluster and the bpmengine is deployed onto this cluster
    when i deploy the application to the bpmengine it gets properly deployed onto the servers
    and i could see the process web services getting generated
    but when i try to call these webservices for each managed server seperately
    the response from managed_server_1 and managed_server_2 takes leass tha 2 secs
    but the response from managed_server_3 and managed_server_4 takes about 25 secs
    I am not able to figure out why us taking so long from the managed servers 3 and 4
    the bpmengine ds and directory ds have the cluster as targets (I also tried to point to all the servers in the cluster even that
    didnot work). I feel that there is db connectivity issue from the servers but i am not sure how to check that.
    Can anyone help me with this ?
    Thanks

    Please make sure that your solman box meet the software prerequisit as per this note below
    1483508 : Solution Manager 7.1: Root Cause Analysis pre-requisites
    This will solve that ptoblem .
    Best Regards
    Jai Wardhan

Maybe you are looking for

  • FireFox web buttons and movie scroll bar do not work anymore!

    == Issue == Firefox is having problems with certain web sites == Description == When watching movies after choosing Maximize movie to full screen movie controls no longer work. You must first hit ESC to get out of full screen mode before controls wor

  • Read Only Barcode Issue

    I have a form that was imported from a PDF document in Adobe LiveCycle Designer ES 8.2.  I added a 3 of 9 barcode and the Default value is the form number (*1.764903.105NFS*).  I do not want a user to be able to click on the barcode, so I made it Rea

  • Problem with encoding and charset for downloading a file

    Hi guys, I have a problem and I beg for your help, I am 1000% frustrated at this point. I have a servlet which have to do something and give a file log to the final user. Coding the logic for that took me about 5 minutes, the problem is that the give

  • Cannon C2880i shared printer on windows network

    Hi gang, I'm a total rookie with apple. I have logged on to our network at work without a problem. I don't know how to connect to our fancy all-in-one which is so critical to my productivity. It's a Cannon C2880i. Can somebody point me in the right d

  • Condition relating two fields

    Post Author: karel.duran CA Forum: WebIntelligence Reporting When building a query on a universe I want to set a condition 'where field A = field B'. Somehow I can't figure out how to do this in a BO query. Can anybodt help me out?