Fail to gunzip the OracleAS 904 for HPUX version
Hi,
I have downloaded OracleAS 904 for HPUX version, gunzip is okay for Disk1 and Disk4, I got mesg like "unexpected end of file" for Disk3.gz and Disk4.gz.
How to get the gunzip working for these two files? Are there anything wrong with them?
Thanks.
Eileen
Please check the sum before using gunzip.
If sum values are not matching with the ones
shown on OTN download page for that file, it
means the download did not complete and file
is most likely corrupted.
If sums are fine, gunzip should not be a
problem.
Similar Messages
-
Server fails when installed the Oracle Developper Suite 10 g
Hi all,
I am facing a problem which is that the server fails to connect after I istalled the Oracle Developper Suite 10 g. I am using Oracle 10g for vista and I followed exactly the instructions that were posted before.
I typed in the command prompt 'tnsping <my_database_name>', and I got the follwinf error: TNS-03505: Failed to Resolve Name.
When I deinstalled the Oracle Developper Suite, I could easily get connected after typing the same instructions.
Thanks in advance
MichaelThe server does not work once the Oracle Development
Suite is installed. When I deinstall this Oracle
Development Suite, the server starts working again. I
mean by "server fails to connect" that when I type in
the command prompt 'tnsping <my_database_name>' the
operation fails. I do not mean that the client fails
to connect to the server, of course the connection
between the client and server could not be
established as the server is already down.Hi Michael,
On Windows each new Oracle install puts itself at the front of the system path, i.e. assuming that you want to use the new environment by default. You can correct this either by editing the path manually or else by firing up the Universal Installer, selecting the "Installed Products" button and then clicking the environment tab.
Name resolution is (ignoring fancy things like directory service support etc) done by each Oracle Home by first examining the contents of the network configuration files in a directory pointed to by the TNS_ADMIN environment variable, then by examining the files in the %ORACLE_HOME%\NETWORK\ADMIN directory where %ORACLE_HOME% is the oracle home for the executable being called. Thus when you've run tnsping you've picked up tnsping from the new developer suite install and it uses the files in it's oracle home to resolve the service name (and fails).
You can correct this by
1) setting TNS_ADMIN and maintaining files in one location.
2) copying the network configuration files from the server oracle home to the developer suite oracle home.
Niall Litchfield
http://www.orawin.info/ -
About the Oracle Financials for Italy patch
Everyone know something about the "Oracle Financials for Italy" , I want to know which patch I need to apply . And then after applied this patch, have some wrong need to apply other patch? ,can you give me a advice? Thanks a lot.
From the Software Investment Guide - see last sentence
Standby – In this method, one or more copies of a primary database are
maintained on a standby server(s). The sites in a standby configuration may be
dispersed geographically and are connected by Oracle Net Services. As the
primary database is modified, log information generated by the changes are
sent to the standby database(s) and subsequently applied to the standby
database. If the primary database fails, a standby database can be activated to
be the new primary database. Solutions like Oracle Data Guard (included with
Oracle Database EE) or customer-generated scripts can be used. In this
environment, both the primary and the standby databases must be fully
licensed. Additionally, the same metric must be used to license both
databases. -
In perfdatasource querying for global snapshot failed with error 'the size limit for this '
I received scom alerts from two win 2k8 r2 servers , hosting exchange 2010 mailbox roles , the alerts came almost in same time from both servers ,
can I ignore those alerts
or can someone give a me a clue how can I troubleshoot those alert , please any help would be appreciated
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
from Ops-mgmt logs
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.PercentIdle.Collection
Instance name: " edb file path "
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.NetworkAdapter.CurrentBandwidth.Collection
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.ForefrontProtection.FPE.Server.PerformanceCollection.RealtimeScanMessageRateHi Blake ,
Thanks for your reply , I appreciate your help ,
I didn't put the alert from scom console because they were same as the events ( same source )
Health Service Modules, I didn't want to spam
more :-)
also the two servers encountered the issue were mailbox servers and part of same DAG , it worth mention the alert were resolved
by Exchange 2010 Correlation Engine service
http://blogs.technet.com/b/kevinholman/archive/2010/10/15/clustering-the-exchange-2010-correlation-engine-service.aspx
http://support.microsoft.com/kb/2592561
also the Opsmgmt logs are full of waring and error event like 2023 , 21402 , 21403 , 1207 !!
Log Name: Operations Manager
Source: HealthService
Date:
Event ID: 2023
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: server 1
Description:
The health service has removed some items from the send queue for management group "SCOM" since it exceeded the maximum allowed size of 15 megabytes.
1- alert from console >>
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
EventSourceName: Health Service Modules -
Failed to load the configuration file for the workflow
Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin -
Not a comforting message to see...
Here are the errors just before the above message is emitted and the install ends.
Jul 26 05:33:33 localhost OSInstaller[344]: PackageKit: Extracting file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/Essentials.pkg (destination=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, uid=0)
Jul 26 05:34:51 localhost OSInstaller[344]: PackageKit: Got copier error 2 extracting to path ./usr/lib/zsh/4.3.11/zsh/zselect.so: Read-only file system
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/DataPool.c:135: Error: finished pool without filling it
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/commonUtils.c:360: Error: fh_pread -1
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :294: Error: pread failed for /Volumes/i7Mac/.OSInstallSandbox-tmp/Root//usr/lib/zsh/4.3.11/zsh/zselect.so: Undefined error: 0
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :928: Error: returning errno 22 from FinishStreamCompressorQueue
Jul 26 05:35:33 localhost OSInstaller[344]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"} {
NSFilePath = "/Volumes/i7Mac/.OSInstallSandbox-tmp/Root";
NSLocalizedDescription = "An error occurred while extracting files from the package \U201cEssentials.pkg\U201d.";
NSURL = "Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg";
NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=1 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\" UserInfo=0x7f8360d47220 {NSLocalizedFailureReason=FinishStreamCompressorQueue error, offset=2847022, type=BOMCopierFatalError, sourcePath=/Volumes/Mac OS X Install DVD/Packages/Essentials.pkg, destinationPath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root}";
PKInstallPackageIdentifier = "com.apple.pkg.Essentials";
Jul 26 05:35:33 localhost OSInstaller[344]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"}
Jul 26 05:35:34 localhost OSInstaller[344]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
If I boot to the "Recovery HD" I get a message "Installation Failed, Try re-intalling" Which would be a fine idea, but I can't because if I re-start installation from the hard drive I get the above errors.
I've burned the "InstallESD.img" to a DVD, but it also doesn't seem to work. Comes up as though I'm in the RecoJen,
Here's what I did to get Lion installed:
Burn the installer to a DVD and install from there. It worked for me. Here's what you need to do:
First you need another computer running at least 10.6.8.
1. On the other computer go to 'App Store' (make sure you're logged in to the App Store with the AppleID you used on the troubled computer)
2. Click on 'Purchased' in the 'App Store' window's toolbar
3. If you are on 10.6.8, and haven't downloaded Lion on that computer just click "Install" to download the installation application.
3. a, if the other computer is already running Lion, you'll need to re-download the installer.
3. b. Hold down 'Option' when selecting 'Purchased' then you click "Install"
4. When the Lion Installer starts up, just quit it. You want to work with the Installer application.
5. Find the "Install Lion OS X" application in the 'Applications' folder.
6. Hold down 'Control' and click on the application and select 'Show Package Contents'
7. Find 'InstallESD.dmg' which is in the "Shared Support" folder and copy it to your desktop.
8. Burn 'InstallESD.dmg' to a DVD ('Disk Utility' is simplest to do this).
9. Put the new install DVD into the computer that has Lion partially installed and reboot holding down the "C" key.
10. run the installer as normal, selecting your harddrive as the target.
In my case, when it rebooted to the harddisk the Lion installer started AGAIN. If this happens, let it run. Then you should be done.
Hope this helps. -
Where can i find the Oracle JDBC for Oracle RDBMS 8.1.7 ? Thanks.
Where can i find the Oracle JDBC for Oracle RDBMS 8.1.7 ? Thanks.
http://otn.oracle.com/software/tech/java/sqlj_jdbc/content.html
-
On Mac OS X 10.9.5
After downloading CC from http://www.tss.qld.edu.au/itdepartment/AdobeCreativeCloud.aspx
The .zip download is fine.
The installer runs but stops half way through (during "running scripts") and gives the error message in the pic below
The installation failed - The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
ANY HELP HUGELY APPRECIATED. I have know idea what to do
Thanks
SteveSince you did not download from Adobe, I don't think Adobe can help
When I clicked the link you provided, it LOOKS like your school has created custom install packages... so check there -
Whether the Oracle 8i for linux is free for business purpose?
if we implement an application with Oracle 8i for linux.And the we will sell the application. whether we must pay the Oracle 8i for linux?
I think the oracle so called their datebase can't use to profit include two perspect:
First, you can't use oracle for linux in bussiness directly.Such as a compnay use oracle on linux as his database platform.
second, you can't use oracle for linux as development platform or run platform and you product used for bussiness perpose.
The above two item certainly uner unauthorized conditions. If you get authorized oracle on linux,you can use it as you want.
null -
Failed to retrive the BW cube for connection
Hi all,
Can anyone help on this?.. I'm getting this error when i refresh/edit webi report. Failed to retrive the BW cube for connection SAP BW BICS. (Error: INF)
Thanks in advance
Vijay MunirajThis may be due to
1. not transported the cube to the prod
2. not given a access to that user to use that cube(query also ) in BI
3. try to import roles of user and group again in BO
4. make sure that you had given a proper access to that user (connection) -
While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility. -
Just purchased a MacBook Pro but had to reinstall OS X but now when I try to install anything I get the following message - The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message. -
So first things first i actually have Mac OS X Lion but i installed Mac OS Snow Leopard in a virtual machine to install "Logic Pro 8" because Lion does not support "PowerPC" Applications (Logic Pro 8 is PowerPC Application). And i tried to install it many tiimes but it always mess up at the end of the install and it says: The Installer encountered an error that caused the installation to fail. Contact the sofware manufacturer for assistance.
Any ideas? Thanks in advance !Contact the virtualization software developer. Unless you're running server, virtualizing SL w/Lion isn't supported. That, most likely is your issue.
-
Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?
Well that's one. Try the Microsoft help forums: http://www.microsoft.com/mac/support It's their application.
Name another. -
When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
What software are you trying to install?
Maybe you are looking for
-
Mail Sounds No Longer Work on iPhone 4.
The sounds for mail, incoming or outgoing, no longer work on my iPhone 4 (4.3.3). All it does is vibrate even though that is set to Off. All the other feature settings are set to ON. I have checked all the sounds and they work, they just don't wor
-
Need help with a message during re-install! "Service apple mobile device failed to start. Verify that you have sufficient privileges to start system services." Windows 7 Thanks!
-
How to determine data size of updates on OS X
I'm on a limited monthly data allotment (satellite-based ISP). In order to effectively manage my data usage, I would like to know how big the updates are. I can access 'unlimited' data during certain off-peak periods. Is there a way to indicate the
-
Switched on my mac this AM, desktop pic had changed, then itunes started up and began playing. Things have not been great since ML upgrade from SL. Any thoughts? 27" imac 3.06 Core 2 4GB Ram
-
How to select all objects in a document?
AI newbie question: I have an active document with two linked files, I need to select both of these in a script and embed both. Then I will be selecting these separate and performing various actions on each. In JavaScript, once I have the document o