Fail to install audio driver lenovo G550 6kg

Hello,
I accidently deleted my conexant audio driver and now unable to completely intalling it back...
I downloaded the driver from lenovo site,each time it fails to install at the "drivet installation wizard" and i'm unable to finish the setup.
My os is Win 7 32 bit' home pre

hi Bar,
Welcome to Lenovo Community Forums!
Can you Open Device Manager
          right click on my computer and choose Manage
                  On Manage window select Device Manager.
 Look if you have a device that has a yellow mark or a question mark.
    right click on each and choose uninstall "Place a check on Delete driver software" if it ask. restart the computer.
Computer should be able to detect the Sound device Hardware and ask you again for the driver then install this
    Conexant Audio Driver
In still does not install Get its Hardware ID and post it back here thanks,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • P4m900m3-l failed to install audio driver

    i got this error when installing the driver
    when i checked the Device manager
    when i tried to uninstall the driver
    what should i do?
    I'm using winxp (it's my friend's pc actually)

    From device manager:
    Click on "system devices", search and select "Microsoft UAA driver", right click over it and "Disable it".
    Reboot PC, and boot in "Safe Mode", go again to device manager and locate "Microsoft UAA driver", right click over it and "Un-install".
    Select "Audio Device on High Definition Audio Bus" and un-install it too.
    Reboot machine in normal mode and run Realtek driver installation again

  • Failed to install audio driver for Kinect, Windows Embedded Standard 7

    I am working on a project that uses the Kinect for Windows. However, the OS is Windows Embedded Standard 7 and it runs on Intel Atom N2600 processor (DE2i-150 board). The Kinect works well on Windows 7. When I migrated the code to WES7, the Kinect does not
    work anymore. All Kinect driver were installed successfully, except for Audio. The board can 'see' the Kinect since it showed the little USB icon on the status bar. However, when I ran some test code from Developer Toolkit, they all said "Kinect is not
    ready" status. I checked the power and reinstalled the SDK/drivers several time but had the same message.
    Does anyone have any suggestion how to solve this problem?

    I would first try a base install of Windows 7 on the same hardware. This will eliminate if it is a WES configurations of a missing component or the device hardware itself. Given that you are running a low powered system, this doesn't meet the minimum hardware
    requirements, let alone the recommended:
    Intel® Atom™ Processor N2600
    (1M Cache, 1.6 GHz)
    http://ark.intel.com/products/58916/
    http://www.microsoft.com/en-us/kinectforwindows/purchase/sensor_setup.aspx
    Dual-core 2.66-GHz or faster processor
    Dedicated USB 2.0 bus

  • Audio driver for G550

    HI friends,
                       I've downloaded my audio driver for G550 laptops for my windows Xp...... But during installation there occured an error and was unable to load..... so please guide me , is there any other way to download the driver software....

    Hi Vaibhav,
    Welcome to the forum!
    Try any or all of these steps.
    1. Enter the BIOS and set it to default values.
    2. Disable the device driver that has problem in the device manager. If you see any yellow or red marks under a device then "Disable the profile" of the device by first going into it's properties. 
    3. Click Start , Run , and type the following into the Open field: msconfig, Click the Boot.ini tab. Remove the checkmark next to /Safeboot , if it is selected. Click OK and restart the PC.
    4. In Safe mode select Start, Run, type "msconfig" and click on OK. Check the box before Normal Startup and click on Apply and OK. Exit and restart your computer.
    5. Your computer may also be infected with a virus or malware, try running a complete scan with an updated antivirus/spyware.
    To successfully install the audio driver, your Windows XP must be at SP2 level and this patch must be applied prior to installing the audio driver:- http://www-307.ibm.com/pc/support/site.wss/MIGR-65456.html
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Assistance to install audio driver on my dv9000

    model hp pavilion dv9000
    windows vista 32-bit
    i m not able to install audio driver on my laptop. every time i try to do it, it says error : Driver installation failed: could not find MEDIA device for this driver. pls help.
    also on the quick launch buttons when i press mute the blue colour does not change to red .... kindly help

    Please try install driver from hp.com; linke below.
    http://ftp.hp.com/pub/softpaq/sp39001-39500/sp39414.exe
    hope it helps.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Pnputil - failed to install the driver

    Hi,
    I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK. 
    Windows 8.1 64bit, last upadate. HP 350 G1. On the another two PCs, everything runs good. Do anybody have some tips for solve this problem? Thank you.
    D:\driver>pnputil -i -a SZCCID.INF
    Microsoft PnP Utility
    Processing inf :            SZCCID.INF
    Failed to install the driver on any of the devices on the system : No more data are avalaible
    Total attempted:              1
    Number successfully imported: 0

    Hi Ding27,
    What is the commands used on the other two PCs? Why not take use of Device Manager to install the proper drivers?
    It seems to be a little problem when using the pnputil command.
    You may take a try with the following:
    pnputil /a /i  <file path/inf file name>
    Reference:
    PnPUtil Command Syntax
    PnPUtil Examples
    Best regards
    Michael Shao
    TechNet Community Support

  • No audio from my hp 550. i truble to re install audio driver.

    i try to re- install audio drive and controll all audio icons and botton on my pc.
    no audio!!! help pls

    Brandon2184 wrote:
    I would try to reset the printing system: http://support.apple.com/kb/ht1341
    Resetting the printing system doesn't affect the already-installed drivers, and you shouldn't need to do anything with those anyway.
    Resetting the Printing System affects all installed printers, they will become uninstalled printers.

  • Lenovo G550 59-046612 problem installing audio driver in XP - SP2

    hi,
       I have recently bought a Lenovo G550 59-046612 laptop. As the given driver cd includes all the drivers for Windows 7 I downloaded all the required drivers for my laptop from the following list
    http://consumersupport.lenovo.com/in/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=600154&OS=W...
    as I am using windows XP Service Pack2. All the drivers installed fine but I got problem installing the audio driver. I tried both from the downloaded exe and also from the extracted folder named drivers in my C drive.I was getting the error "A conexant audio device could not be found.The application will now exit." Please help me out.
    Thanks in advance
    Sudip

    have you tried to install drivers on safe mode or manually?
    after you locate the .inf file for the driver that you want to install, manually install the new driver. to do this, follow these steps:
    - click start, right-click computer, and then click properties.in the tasks pane, click device manager.
    - if you are prompted for an administrator password or confirmation, type your password or click continue.
    - in device manager, locate the device for which you want to install the driver.
    note to display hidden devices, click show hidden devices on the view menu.
    - right-click the device, and then click update driver software.
    - click browse my computer for driver software, click let me pick from a list of device drivers on my computer, and then click have disk.
    - in the install from disk dialog box, click browse, locate an .inf file for the device driver that you want to install, and then click open.
    - follow the steps in the update driver software devicename dialog box to update the driver

  • HP ENVY TS 15 Notebook PC: Problems installing audio driver (High Definition Audio device)

    Hello all,
    My product is the HP ENVY TS 15 Notebook PC.
    Product number: E3B65PA#AR6
    OS: Windows 8.1 64-bit
    A few days ago, I  upgraded my windows from windows 8 to windows 8.1 and found that no sound coming from the HDTV when connecting my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. I have checked the HDMI cable and it is working fine with other laptop.
    Device manager is showing 2 device :
      High Definition audio device ( Showing yellow traingle)
      IDT High Definition Audio CODEC
    When I am opening the properties of High Definition audio device it is showing :
    This device cannot start (code 10)
    {Operation Failed}
    The requested operation was unsuccessful.
    If anyone knows how to fix the problem, please help me
    thanks in advance
    This question was solved.
    View Solution.

    Hi:
    The IDT audio driver (notebook speakers) appears to be working fine.
    The problem is probably with the Intel graphics driver which  controls the HDMI audio.
    My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208...

  • How can I install audio driver from BootCamp into Windows 7?

    After an uneventful installation of Window 7 (64) onto iMac  cor 2duo OS X 10.6.7.
    NO SOUND.
    I have tried to replace the Audio Driver HD through Device Manager: it is not working
      a) if I disable the Windows Driver and try to install the Cirrus driver from the BootCamp disc, I am informed that "device already has the optimal driver"
      b) if I unistall the WIndows driver, Sound Video Game Controller disappears from Device Manager-so there is no place through which I can install a new driver.
    c) If I start from the BootCamp/Driver folder and select Cirrus and Install, I am again getting the answer that the "device already has the optimal driver"
    I am frustrated! Please, can you advise how to proceed?

    You do NOT want to disable unless you are not going to use a device.
    You want to rollback or uninstall and get Cirrus driver.
    Try Boot Camp (Setup) repair-reinstall - to enable the device.

  • Fail during installing AMD driver

    Hi , i have been trying to update my AMD 6770m driver from 8.830.6.1000 to the new update but i failed each time
    i tried auto detection and update and it shows me errors
    i tried manualy by browsing to the c/amd/support then the driver but it show that my driver is uptodate !!!
    one time it showed succes and told me to restart my computer then after i did it bring back the old !!
    i tried to uninstall it then restart but it goes back to the old
    my computer is HP pavilion dv6 6285ex

    Hello kreem,
    Welcome to the HP Forums!
    I understand the computer cannot install the latest AMD driver. I'll do my best to assist you! First, I require the following information:
    1. What are the exact errors that appear when you try to install the AMD driver?
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new software or drivers on this computer, before the issue appeared?
    4. Are you trying to install the driver from HP.com or AMD.com?
    Thanks, and have a great day!
    Mario
    I worked on behalf of HP.

  • How to install audio driver on a presario sr1907cl

    I am having one hell of a time trying to install the audio driver on a compaq presario sr1907cl. When I try to install sp26731, it said I have to install UAA Audio Buss Driver from Microsoft, so when I tryed to install it, I got a window that said my os is newer than the driver. Seems like I'm just spinning my wheels. Don't know what to do to get sound on this thing. Any help would be greatly appriciated. I've never seen anything like this just to install a sound driver, but I'm sure this has happened to lots of others.
    Thank You Much,
    [email protected]
    This question was solved.
    View Solution.

    Hi:
    You probably should install the latest XP nForce chipset driver for your model first and reboot.
    http://www.nvidia.com/download/driverResults.aspx/9701/en-us
    Then see if the latest Realtek driver works.
    If you installed XP SP3, you shouldn't need the msuaa driver.
    Accept the agreement, download and install the 4th item on the list (first one in green).
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

  • Windows update fails to install graphic driver

    Hello everyone,
    I have a problem, I recently installed Windows 10 Technical build 9926.
    Windows update shows me that there is a update available for my Nvidia geforce GT 520 M card.
    If I install the driver the installation fails.  I have tried this for a couple of times but the problem stays.
    Does anyone have a solution for this problem.
    My System specifications are:
    Windows 10 Technical preview build 9926 ( upgrade from windows 8.1 via windows update)
    RAM: 6 GB
    CPU: Intel Core i5 2430M
    GPU: Nvidia geforce GT 520M

    For what it's worth, as a rule, I NEVER install the video drivers offered via Windows Update. They have always been bad news for me. Case in point: I just upgraded my Dell Optiplex 9030 AiO to the Win 10 Ent Preview Build 9926. This PC has an AMD Radeon
    R7 M265 video chipset in it, and the system automatically went to Windows Update to get the driver for it. As soon as the driver activated, the screen went blank and stayed that way. The only way to fix it was to roll back the the driver installation
    with System Restore. When the PC rebooted, I unplugged the network cable so it couldn't attempt to install the flaky driver again. I downloaded the latest drivers from AMD directly and installed them. That fixed the problem.
    So, my advice to you is to use the latest Windows 8/8.1 drivers for your card from the manufacturer's website. DO NOT USE VIDEO DRIVERS THAT ARE OFFERED VIA WINDOWS UPDATE. Other hardware drivers are usually okay, but the video drivers always seem to
    be whacked in some way.
    Jeff R.

  • HP ENVY TS 15 Notebook PC: Problems installing audio driver

    Hello all,
    My product is the HP ENVY TS 15 Notebook PC. 
    Product number: E7Z34UA#ABA
    OS: Windows 8.1 64-bit
    A few days ago, I opened my laptop to find that there was no sound coming from the speakers at all. I was completely baffled because the audio was working perfectly fine before, even after upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. Now, however, when trying to update the IDT driver, it says that a device attatched to the system is not functioning. What do I do? 
    I have provided screenshots of things that appear when I try to fix this issue. 
    This question was solved.
    View Solution.

    Hello skyeisthelimit. I understand there is no sound produced by the notebook. Based on the description, I believe that the issue is software-based. However, I'm not going to eliminate faulty hardware from my mind. You have attempted some troubleshooting, which is great. I am going to provide some troubleshooting as well (certain steps you already completed). Please follow all troubleshooting in the order I suggest:
    First, there is Microsoft Wizard Tutorial that troubleshoots sound issues in Windows 8.1. Please follow the wizard until it is finished. You can locate this wizard here: http://windows.microsoft.com/en-CA/windows/no-sound-help#no-sound=windows-8&v1h=win8tab1&v2h=win7tab...
    Second, follow all of the troubleshooting, suggest in this HP document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03257712
    Eventually, you will be asked to reinstall updated drivers. Please install this one: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...
    Assuming the issue is not resolved, the next step is to refresh Windows 8. This will force the computer to return to Windows 8. It will also clean up the computer, to a certain extent (it is not as powerful as a recovery). For more information on how to refresh Windows, please reference this Microsoft document: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc
    If refreshing the operating system does not resolve the issue, reinstall the operating system is the next step. Ensure you backup all of your data beforehand.
    For information on how to effectively backup your computer, please reference this document: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03270359
    For information on how to perform a system recovery, please reference this document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03489643
    Please respond with the results of your troubleshooting. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • Cannot install audio driver because Microsoft bus driver should be installed

    hello!
    I have a satellite serie A laptop. When i try to install audio drivers it says "Microsoft bus driver should be loaded before installing Realtek High definition audio driver".
    I've downloaded KB835221 and kb888111xpsp2 uplods and they should fix the problem, but they didn't. what should i do now?

    Hello Jan
    I presume you want to install your own operating system (probably WXP Pro) only thing you must do is to install all drivers and Toshiba designed stuff in right order. I dont know which notebook model you have exactly but check if you can find installations instructions document.
    If you have newer unit A series be sure that WXP contains SP2.

Maybe you are looking for

  • Job is in Dispatched status

    Hello Experts, I had some problem in the running of the daily jobs in the Redwood Production Environment.Actually A job was to run at around 2P.M as per its scheduled,But the job did not run as per its scheduled.Instead of showing the status as runni

  • Field ENAME is missing in PA40 and PA30 Screens

    Hi All, Field ENAME (Formatted Name of Employee or Applicant) is missing in PA40 and PA30 screens. Please let me know how to have this field on the screens. Setting so far I have made: Screen header in Table V_582A_B is u201C00u201D for IT 0000, IT 0

  • Polycom CX 600 - Certificate web service cannot be found

    Hi All, I know, there are some same issues in the forum, bot those are not helpful for me. My problem is the same, via network cable (using just DHCP) the Polycom CX 600 Lync Phone are not able to sign in (however 1 month ago it was), returning the e

  • Computer turns on and goes straight to gray screen telling me to restart.

    I just finished installing Leopard on my computer and I decided to do a software update. While the computer was restarting it stayed at a blue screen for a while downloading files. This was taking too long and I had a paper to do so I manually shut d

  • ?? "The movie could not be sent to Quicktime because a file couldn't be..."

    trying to export a movie in iMovie HD - and that's what it says: "The movie could not be sent to Quicktime because a file couldn't be found" then it says to rename the folder called "iMovie" in the library to "iMovie0", restart and press on. then ...