Fail to publish iWeb content

Already been 2 days having troubles in publishing iWeb08 content (using Mac)though .Mac keeps saying the problems have been fixed.
But me always getting this message :
Publish Error : An error occurred while publishing file “......” or "rss"(or this and that). Try publishing again later.
So just wasting my time sitting and waiting and can't do nothing ~~~
Anyone has a clue ?
Many thx !
PS.
Is it the problem with iWeb08 or is it .Mac ???
Message was edited by: Echo Wong
Message was edited by: Echo Wong

Some say it's a problem introduced with the QuickTime 7.2 "iLife compatibility" update...
http://www.macfixit.com/article.php?story=20070914105332918
...you can send Apple feedback via this form:
http://www.apple.com/feedback/iweb.html

Similar Messages

Inability to publish iWeb content using MobileMe

I'm in a serious time crunch to get my site updated on Tuesday. I've made lots of edits and revisions and saved frequently. When I attempt to publish in part or whole, it acts as if it is publishing successfully, but when I visit the site, it's the old version. I've cleared my cache several times now. I even tried Apple's suggestion to quit iWeb then find and delete some com.apple.iWeb.plist files. Guess what, I don't have those files in the location specified. I have other com.apple.... files but nothing for iWeb. I logged in to me.com to make sure everything is ok with my account - and it is. I don't know what else to try. Any help appreciated

Yes you do have the com.apple.iWeb.plist file. You are probably looking in the wrong place for them though. Rather than going to the System Library/Preferences you need to go to your Home User Library/Preferences instead and this is where the com.apple.iWeb.plist file is - the iWeb application and domain files are stored under Home user/Library/Application Support/iWeb and so the plist file is under the home user Library/Preferences.

Transfer iWeb content to new computer

My G4 finally died, but before I could back up any iWeb files. I have bought a new MacPro now, and need to know if its possible to get it all back from the internet version somehow?

Tim,
I'm sorry....there really isn't anyway to import your
online site back into iWeb for further editing and
publishing. In the future, you should keep a backup
of the Domain file if you can. This is the one file
in which iWeb stores everything about your website.
Best of luck to you....and congratulations on the new
computer! I am officially jealous!
I'm having this same problem-- I uploaded my iweb content to a pre-existing server (not .mac). since then I've had to do an erase and install (long story) and my last backup was a month ago. I downloaded all the iweb files from the site... but there's no way to restore them and get back to work?
my question is:
if I restore my domain file from a backup a month ago will I be able to add files created AFTER the backup? there's no "import" feature in the file menu.
or am I just screwed?
thanks in advance

Animate "Fails" to Publish project (Windows 7 Professional); can't access folder?

I have seen the other "Publish" question on this forum, but this seems to be another issue. When publishing a project to Web, the resulting dialog indicates...
"Failed to publish to Web at path: "pathname". Make sure the folder is accessible and the file is not locked.
All the same, when I go to the project saved location I find new Publish and /Web folders, a new Publish/Web/Image folder, an Edge_includes folder and the expected .js and .htm or .html files. For a while, I simply used these and ignored the error messages. Something may have changed in my workflow or setup, although I have no idea what, but now the resulting published package does not work. By "not work," I mean when I click the resulting .htm(l) file the animation is blank.
Windows 7 Professional
Edge Animate 2014.1 (up to date as of today)
I have uninstalled EA completely, including preferences, re installed, renamed the project, changed folder locations, same problem.
Help would be appreciated.

Hi,
Can you have a look at these tutorials to make sure that you have everything covered?
Edge Animate Publish Files and JS Folder | EdgeDocks.com
Edge Animate Help | Publish your content
Thanks,
Preran

I can't publish - iWeb crashes every time I try

For the past 3 days, each time I try to publish, iWeb begins republishing all the pages and then just quits. I have been using the program for many months now and everything was fine. I added a lot of new photos. Could that be the problem? As far as I can tell, that is all I did. Any suggestions for getting back to my blog?

I am having the same problem. I have added another page to a site and iweb crashes. I have watched and it crashes at different times during the publish. I have tried to move the page around but nothing works. The last message I got was:
Date/Time: 2007-07-23 19:13:30.351 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: iWeb
Path: /Applications/iWeb.app/Contents/MacOS/iWeb
Parent: WindowServer [84]
Version: 1.1.2 (192)
Build Version: 20
Project Name: iWeb
Source Version: 1940000
PID: 247
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0 Crashed:
0 ...ickTimeComponents.component 0x9805c0b6 Sound3STAddSampleReferencesS64 + 61
1 ...ple.CoreServices.CarbonCore 0x90cd0c6a CallComponentFunctionCommon + 1048
2 ...ickTimeComponents.component 0x98057a69 Sound3ComponentDispatch + 210
3 ...ple.CoreServices.CarbonCore 0x90cd0738 CallComponentDispatch + 34
4 com.apple.QuickTime 0x943bbe59 MediaSTAddSampleReferencesS64 + 86
5 com.apple.QuickTime 0x943bbdb6 AddMediaSampleReferences64_priv + 98
6 com.apple.QuickTime 0x943bbd4d AddMediaSampleReferences64 + 50
7 ...i.christoph.ffaviimporter 0x1296cee6 import_avi + 524
8 ...i.christoph.ffaviimporter 0x1296c7a4 FFAvi_MovieImportDataRef + 738
9 ...ple.CoreServices.CarbonCore 0x90cd0c6a CallComponentFunctionCommon + 1048
10 ...i.christoph.ffaviimporter 0x1296ca2a FFAvi_MovieImportComponentDispatch + 127
11 ...ple.CoreServices.CarbonCore 0x90cd0738 CallComponentDispatch + 34
12 com.apple.QuickTime 0x94395ec8 MovieImportDataRef + 91
13 ...i.christoph.ffaviimporter 0x1296c4a8 FFAvi_MovieImportFile + 138
14 ...ple.CoreServices.CarbonCore 0x90cd0c6a CallComponentFunctionCommon + 1048
15 ...i.christoph.ffaviimporter 0x1296ca2a FFAvi_MovieImportComponentDispatch + 127
16 ...ple.CoreServices.CarbonCore 0x90cd0738 CallComponentDispatch + 34
17 com.apple.QuickTime 0x943bbd18 MovieImportFile + 85
18 com.apple.QuickTime 0x943bbac5 newMovieFromFileFromComponent + 554
19 com.apple.QuickTime 0x94309fad getNewMovieFromFileUsingImporters + 794
20 com.apple.QuickTime 0x94309a49 NewMovieFromFilePriv + 1433
21 com.apple.QuickTime 0x943fbc12 NewMovieFromFile_priv + 52
22 com.apple.QuickTime 0x943fbbd3 NewMovieFromFile + 61
23 BLCompatibility 0x01116c4f TTMovieFromPath(NSString*) + 137
24 BLCompatibility 0x0112dbbb +[HEMMedia(Private) mapMediaBinary:state:] + 379
25 BLCompatibility 0x0112c2e5 +[HEMMedia map:posOffset:to:state:] + 49
26 BLCompatibility 0x0112c2ad +[HEMMedia map:to:state:] + 73
27 BLCompatibility 0x011860a5 +[HEMBLShape mapDrawable:to:state:] + 1223
28 BLCompatibility 0x01135ce8 +[HEMShape mapDrawables:to:forceGroupImaging:state:] + 490
29 BLCompatibility 0x01135af8 +[HEMShape mapDrawables:to:state:] + 62
30 BLCompatibility 0x01160818 +[HEMBLDrawables(Private) mapLayer:to:floating:clip:state:] + 1418
31 BLCompatibility 0x01160216 +[HEMBLDrawables map:to:state:] + 812
32 BLCompatibility 0x0115e1f7 +[HEMBLSitePage map:siteName:wasRenamed:state:rssURL:] + 955
33 BLCompatibility 0x0115de36 +[HEMBLSitePage map:siteName:wasRenamed:state:] + 70
34 BLCompatibility 0x01153b6f +[HEMBLDocument(Private) mapSite:fileManager:state:] + 2003
35 BLCompatibility 0x01153326 +[HEMBLDocument(Private) mapSites:state:] + 1262
36 BLCompatibility 0x011522fc -[HEBLExporter writeDocument:withArchiver:toFile:binaryDirectory:] + 866
37 com.apple.iWeb 0x000be6c5 0x1000 + 775877
38 com.apple.iWeb 0x000be05e 0x1000 + 774238
39 com.apple.iWeb 0x000b2d19 0x1000 + 728345
40 com.apple.iWeb 0x0005a86d 0x1000 + 366701
41 com.apple.iWeb 0x0005a094 0x1000 + 364692
42 com.apple.AppKit 0x93502850 -[NSDocument writeSafelyToURL:ofType:forSaveOperation:error:] + 167
43 com.apple.AppKit 0x935025ad -[NSDocument saveToURL:ofType:forSaveOperation:error:] + 203
44 com.apple.AppKit 0x935f5743 -[NSDocument _saveToURL:ofType:forSaveOperation:delegate:didSaveSelector:contextInfo:] + 63
45 com.apple.AppKit 0x935024d7 -[NSDocument saveToURL:ofType:forSaveOperation:delegate:didSaveSelector:contextInfo:] + 859
46 com.apple.AppKit 0x935f4b66 -[NSDocument _saveDocumentWithDelegate:didSaveSelector:contextInfo:] + 589
47 com.apple.AppKit 0x93502174 -[NSDocument saveDocumentWithDelegate:didSaveSelector:contextInfo:] + 365
48 com.apple.AppKit 0x93502000 -[NSDocument saveDocument:] + 57
49 com.apple.iWeb 0x0005949b 0x1000 + 361627
50 com.apple.iWeb 0x000597d5 0x1000 + 362453
51 com.apple.iWeb 0x00061776 0x1000 + 395126
52 com.apple.iWeb 0x00060fb1 0x1000 + 393137
53 com.apple.iWeb 0x0005d176 0x1000 + 377206
54 com.apple.iWeb.SFControls 0x38d79c91 -[SFCImageButton mouseUp:] + 315
55 com.apple.AppKit 0x9334442b -[NSWindow sendEvent:] + 5403
56 com.apple.AppKit 0x93336350 -[NSApplication sendEvent:] + 5023
57 com.apple.sf.sfapplication 0x0041373b -[SFBApplication sendEvent:] + 171
58 com.apple.iWeb 0x0002b6a1 0x1000 + 173729
59 com.apple.AppKit 0x93260dfe -[NSApplication run] + 547
60 com.apple.AppKit 0x93254d2f NSApplicationMain + 573
61 com.apple.iWeb 0x000036d3 0x1000 + 9939
62 com.apple.iWeb 0x0005876e 0x1000 + 358254
63 com.apple.iWeb 0x00058689 0x1000 + 358025
There was more than this but I didn't want to put everything on here.
HELP!!!

Publishing iWeb pages from 2 different Macs

I have recently bought a MacBook to complement my G4 Powermac desktop - the desktop has iLife05 installed and the MacBook iLife06.
I am really enjoying using the iWeb application and would like to be able to publish iWeb pages from both my MacBook and my desktop mac. Is there anyway I can get iLife06 transferred onto my desktop. I have already been firewiring files between the two - can I do the same with software or do I need to buy iLife all over again?
Powermac G4 Dual 1.42GHz

Hi James,
Your response definitely helped me since my boss and I are trying to maintain a website on both of our computers...
BUT, i have a huge problem. Before I knew how to transfer or find the domain files, I used the "FIND" option to search for the domain site on my computer and when i clicked it open, my site didn't come up but rather a prompt asking me what type of website I'd like to create. For months, the website we created showed up every time I opened iweb but now when i simply clicked on domain.site or whatever it was that turned up in the "Find" folder, I can't bring up or locate the site I created on the computer so I have no way to update it or put it on a disc for my boss... Do you have any idea what caused my site to disappear simply by clicking on domain or any idea where i could find my site??
please help!! thanks!
Vanessa
one more thing: is it possible for my boss to edit the content of the website without iweb? could she do it through the actual website with a password or something? just curious... also if i can't get that original domain site back, is there a way i can transfer my website to a different website other than iweb so that i can keep updating without having to redo the whole thing? even being able to transfer separate blogs from iweb to the original site would work too - anything to not have to redo the welcome page and picture pages that are already online

Failed to Publish: Native Error: Server name or address could not be resolved

I'm trying to publish my RoboHelp HTML project to our server
(dentiis01). I get the following error:
"Warning: Failed to publish to "dentiis01". reason:
Connection failed. Please check the connection and post again.
Native Error:The server name or address could not be
resolved."
(Note: The person who originally published the project has
left the company, so I'm not sure what options he specified).
I have tried substituting the IP address for the server. I
have also tried specifying with and without the port number (8000
in our case). I can successfully ping the server using either the
host name or IP address. I can view the current RoboHelp content
via a browser. So, it appears the engine is running properly.
Please let me know if you have any suggestions.
Thanks.

I resolved my problem. I was trying to publish from "WebHelp
(Primary Layout)" instead of "WebHelp Pro". Now the publish
operation seems to be working fine.
Thanks,
Greg

Published iWeb Blog and Snow Leopard

Published iWeb with iLife 08 to Mobile Me. Want to continue publishing to this site, but can't get Snow Leopard to connect to the iWeb published page. Don't think I should have to start over to add more content.

Snow Leopard is an operating system and isn't used to connect to web pages. What did you do and what do you want to do?
Did you install Snow Leopard and lose your ability to use iWeb to edit your site? If so you need to get a copy of the Domain.sites file that iWeb 08 used to create the site in order for you to be able to continue editing. It's located in your User/Library/Application Support/iWeb folder.
If you don't have that file then you'll have to rebuild the site from scratch. If that's the case Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing image, audio and/or video files in the published site in the reconstruction of the site.
If you don't have a backup maybe it's time to consider and begin a backup strategy.
OT

LSO - Publish Course Content error

Hi All
We are having a problem publishing course content from the Learning Solution Admin role.
Content type is set to "Single File". I am able to navigate to the source file and also the target folder.
I then click on Publish, and the message to say that it is being published in the background.
However, when I go back to the Published Content view, I see the upload in error with a status = "Failed" and the progress indicator stuck on 14%. All subsequent upload attempts end with the same progress percentage...
Any idea what the problem could be?
thanks in advance
Anton Kruse

Hi Anton,
Assuming rest of your confirguration in place, check if there are no issues with the content. Validate if it is SCORM. If you have Authoring Environment installed then you could check the content by trying to import it through Authoring Environment. If there are any errors then an error is displayed.
-Ravi Sekhar

Can't publish iWeb due to .png error

can't publish iWeb due to .png error

With as many people that have this same issue, I am very surprised that support is still sleeping at the wheel. Some of the suggestions border on the absolute absurd (e.g. create new user account, check the system clock, etc.). I've tried them all, including exclusion from AVAST, resetting router, etc etc etc. iCloud status shows all green.
As the owner of a software development company, I find it hard to believe Apple, of all support, has been unable to get this issue resolved once and for all. It would certainly make sense, as well, to collate this issue into a single thread instead of bouncing users off the moon and back.
I spent 1/2 day on the phone with Apple support trying to get iTunes to backup and was promised a call back from the next tier of support. That was 4 months ago and I still haven't been able to backup my iphone 4S. I've never seen software that is more kludgy and unreliable with every passing upgrade (sorry, but it's the truth)!
After two years of not being able to back up my phone, I am considering going to a more reliable platform. After 6 years on the Apple bus, maybe it's time to get off.
Mike Maurer, [email protected]

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Error occurred while publishing the content item to the Knowledge Directory

We are receiving the following error upon publishing non-binary content items to the knowledge directory:
Error occurred while publishing the content item to the Knowledge Directory. Contact your portal administrator.
Ironically, in the KD, we call see all content items located in Publisher when we are in Edit mode -- even though they haven't been published to the KD yet. In Browse mode, we can't see any content items.
Has anyone see this error before? What could be the cause?
We are using ALUI 6.1.

Hi,
If you are seeing the documents in the Knowledge Directory and in edit mode, but not browse mode then check/try the following. What exactly were you doing when you got the error? Were you in Publisher or in the Knowledge Directory and running the Simple Submit task?:
1. Try to approve the documents in edit mode.
2. Go to the Administrative->Intrinsic Operations and run the following jobs.
--> Search Update 1
3. Make sure you have proper permissions on the folder in the Knowledge Directory and Publisher Folders.
4. Check the permissions on the Content Source for the Knowledge Directory
I need a little more information to get your better help.
tnx
James

Publish the content selectors

Hi
I am Surya ,I am working in bea weblogic portal 8.1
I want to publish the content selectors which is created in the Portal Admin
How should i display the html file which i have uploaded?
When i access my home page ,i could not see the html File which i uploaded in
Content Item(Portal Admin under BEA Repository).
Here is the step which i followed
1.I have created content selector named "Home.sel" in contentselectors\GlobalContentSelectors
Directory
The parameters given are
1.Start Date 1st June 2004
2.I have created Type name "BPO" in the Portal Admin under BEA Repository
The parameters Used are
1.Start Date
2.End Date
3.File(i have Uploaded a html file)
4.Author
3.I have created a Content Item named "June2" in the Portal Admin under BEA Repository
The parameters given are
1.Start Date 1st June 2004
2.End Date 30th June 2004
3.File(i have Uploaded a html file)
4.Author Suresh
4.In my portal,i have added "<pz:contentQuery>" tag in Jsp to see the result in
my "home.jsp" file
<pz:contentQuery id="docs" query="author = 'Suresh'" />
<ul>
<es:forEachInArray array="<%=docs%>" id="aDoc"type="com.bea.content.Node">
<li>The document Author is: <cm:getProperty id="aDoc" name="Author" conversionType="Text"
/>
<li>The document File is: <cm:getProperty id="aDoc" name="File" conversionType="html"
/>
</es:forEachInArray>
</ul>
Can you pls mail me the solution or hint
Thanks in Advance
Regards
Surya

Hi
Use
<pz:contentSelector rule="Home" id="nodes"/>
<pz:contentQuery id="nodes" query="Author = 'Surya'" />
<utility:forEachInArray array="<%=nodes%>" id="aDoc" type="com.bea.content.Node">
<cm:getProperty id="aDoc" name="File" transactionTimeout="30" conversionType="html"
/>
<cm:getNode path="<%=request.getContextPath() +aDoc.getPath()%>" id="myNode"/>
<cm:getProperty node="<%=myNode%>" name="html" conversionType="html"/>
</utility:forEachInArray>
Key word here is
transactionTimeout="30"
Thanks
Surya
"Surya" <[email protected]> wrote:
>
Hi
I am Surya ,I am working in bea weblogic portal 8.1
I want to publish the content selectors which is created in the Portal
Admin
How should i display the html file which i have uploaded?
When i access my home page ,i could not see the html File which i uploaded
in
Content Item(Portal Admin under BEA Repository).
Here is the step which i followed
1.I have created content selector named "Home.sel" in contentselectors\GlobalContentSelectors
Directory
The parameters given are
1.Start Date 1st June 2004
2.I have created Type name "BPO" in the Portal Admin under BEA Repository
The parameters Used are
1.Start Date
2.End Date
3.File(i have Uploaded a html file)
4.Author
3.I have created a Content Item named "June2" in the Portal Admin under
BEA Repository
The parameters given are
1.Start Date 1st June 2004
2.End Date 30th June 2004
3.File(i have Uploaded a html file)
4.Author Suresh
4.In my portal,i have added "<pz:contentQuery>" tag in Jsp to see the
result in
my "home.jsp" file
<pz:contentQuery id="docs" query="author = 'Suresh'" />
<ul>
<es:forEachInArray array="<%=docs%>" id="aDoc"type="com.bea.content.Node">
<li>The document Author is: <cm:getProperty id="aDoc" name="Author" conversionType="Text"
/>
<li>The document File is: <cm:getProperty id="aDoc" name="File" conversionType="html"
/>
</es:forEachInArray>
</ul>
Can you pls mail me the solution or hint
Thanks in Advance
Regards
Surya

Error occured while reading identity data: failed to decrypt safe contents

Hello,
We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
Java Version -
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Please let me know if any of you faced similar issues.
thanks in advace.
Following are the error messages.
javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
##### Linked Exception:
com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more

For the benifit of others.
The issue is resolved.
When we set the certificate password inside our application we were encrypting it inside our system.
When we sent it to tibco we did not decrypt it.
So the encrypted password was sent as it is that was the issue :(
Thanks,
Reflex.

Failing to publish and deploy from CVS Repository

We have installed CVS on one of the machine and we have configured the CVS in our studio (version 5.7 MP3).
We stored the project in the repository(CVS) and when publish and deployed it pops up with an error message and fails to publish.
But before storing it in the CVS there were no errors and was successfuly publishing and deploying.
Even the exported file if executed in a different workspace (without CVS configured), it runs successfully.
Is it that we need to unlock in some file for successfull execution.
Please suggest / help.
Thanks in advance
Jayant

Hi,
Do you want to configuring SSL for cloud service? I suggest you have a look at the following article.
#http://www.windowsazure.com/en-us/documentation/articles/cloud-services-configure-ssl-certificate/
Please try to do as above article, in addition please note the certificate must meet the following requirements for SSL certificates in Windows Azure. If I misunderstand, please feel free to let me know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fail to publish iWeb content

Similar Messages

Maybe you are looking for