Fail to save the Bonus Buy (RDMBBY01)

Greetings,
I have created a bonus buy by T-code RDMBBY01, however, it pops up an error when I tried to save the bonus buy:
Message no. RDM_BBY039
No suitable condition table for bonus buy prof. XXXX / cond. type BB01 found
Does anyone can help on this?
Thanks!
WL

Hi Wini,
please check your customizing:
SPRO --> Sales and Distribution --> Basic Functions --> Bonus Buy --> Maintain Condition Table and Maintain Control for Posting of Conditions
Hope it helps.
Regards
Tobias

Similar Messages

When trying to generate a docx RH8 fails to save the document and crashes

Hi all,
I am trying to generate a docx with RH8 under Win XP Pro Japanese localization, and shortly after the conversion starts, I begin getting warnings that RH "Failed to save the Word Document after appending a malformed topics:" and then gives the name of the topic. This is happening for all topics, though it generated fine previous to the last changes I did in the project.
The changes I did in the project were just additions of topics the usual way. No importing of any kind, just copy from Word and paste in RH8.
I suspect a RH corruption, however if I could avoid reinstalling RH, it would be awesome.
I just repaired Office 2007, as I was thinking that Word might be the problem, however the same thing happens, so my best guess would be reinstalling RH8.
Any ideas as what could be the problem?
Thank you,
Bogdan

I reinstalled RH8 and managed to generate the printed documentation normally.
So the problem was RH8 which got corrupted without any apparent reason.
Bogdan

WHAT IS THE BONUS BUY . GIVE ME DETIAL ABOUT

Dear Friends
WHAT IS THE BONUS BUY . GIVE ME DETAIL ABOUT
     I) CONCEPT
     II) PROCEDURE OF ENDURES WORK
     III) CUSTOMIZATION
Thanking You
Arun

Dear Arun
Check these threads
[bonus buy   |bonus buy]
[Bonus Buy   |Re: Bonus Buy]
thanks
G. Lakshmipathi

XPS to PDF fails to save the converted doccument

Hello All,
We are facing a unique issue with XPS to PDF conversion. We are using Adobe Professional 9.3.0 version and when we try to convert the XPS to PDF, the conversion is happenning without any problem. However when we save the converted PDF, & relaunch the PDF we do not see any data.
Please Advice.
Thanks & Regards,
Sudeep

Hi,
Sorry to hear this is the case, it sounds like a bug to me...and it has been reported in an existing bug. Here is the report, http://bugzilla.mozilla.org/show_bug.cgi?id=640449
Thanks for reporting this here because the issue was 'not reproducible' in the bug evaluation. I have added a link to your support request, so hopefully it will get some traction.

Failed to save the PDF file into the open location as default

Hi all,
Please help me!
In Acrobat XI professional, while save the PDF file using the SAVEAS option it shows the previous file saved location path.
But i need the current opened location path while save the PDF file.
Please help me to solve the issue.
Regards,
JayaKrishnan

What an awesome idea, Bernd...
I've just encountered the same situation and it's irritating the hell outta me. Adobe's always gotta screw something up to irritate us. As if having the rent their software isn't irritation enough.
The problem is when you open a file and then Save As it has always, and in every program known to man (at least that I've used), offered to Save As in the same folder where the file was opened from. Now it wants to save it in the last "saved to" directory.
While this could be convenient on occasion it's a PitA most of the time.
Any actual solution to this misbehaving Save dialog?

Additional article for free goods- Exclusive Bonus buy

Dear All,
Additional article for free goods in bonus buy
In exclusive free goods, a material different from the orignal material can be specified as the free goods.
Example: A customer who buys 3 pieces of Trouser's, gets 2 pieces of shirt free.
So my question is , how can i add 2 pieces of shirt free if it has different variant (ex: i want to enter Red colour & Green colour article ) in bonus buy, As in Bonus buy we only can enter one line item.
Please help....
Regards
Saurabh

in VBG1
1. enter the name of the Article grouping, e.g. Shirt1
2. at tab Article, enter article number(s) and quantity. in your case, enter the variants of the generic article (one for red shirt, one for green shirt, or whatever). enter quantity 1 for both variants.
3. save
when creating the bonus buy,
1. select radio button Article Grouping
2. enter the article Grouping you just created in "Article Grouping" <--- this is the bonus articles, not the preriquisite
please notice that the "FreeGoods" is 1 - inclusive; however, it doesn't matter here.
this is probably different from what you normally do when creating a normal free goods condition in SD. since the prerequisite article is already maintained in the area below. that means the article grouping you just maintained in step 2 is the bonus. as a result, the 2 articles in the article group are bonus articles.

Bonus Buy / Rebate in kind inclusive

Hello,
I wanted to create bonus buy conditions to implement rebate in kind, as stated in this scenario:
When buying 5 items “CUP OF COFFEE”, the customer should get one of the 5 items for free. So, he buys 5 items and receives 5 items, but only pays for 4.
I think this is referred to as rebate in kind inclusive.
Unfortunately I could not figure out how to implement this scenario with bonus buy.
I only could figure out how you implement rebate in kind, exclusive (see attached screenshot).
How can I create a rebate in kind inclusive with SAP Retail Bonus Buy?
Thanks a lot
Best,

Hi guys,
I guess that Venu is right with logic to enter the free goods type of dicount (use 100% for Discount Percentage) and it is also confirmed in the following link to help.sap.com;
Retail, Bonus Buy with New User Interface
However, I am not sure that the fact of having the same article in BUY and GET sub-screens makes the bonus buy automatically inclusive. Documentation in transaction RDMBBY01 gives examples of many BB combinations but none of them is Matthias' case.
One similar talks about buying three different t-shirts and getting one of the for free; in this case SAP tells us to;
> create group of three t-shirts in BUY section with required quantity 2 PC (not three!)
> define one of the t-shirts in the GET section with 100% discount
=> this seems to be rather exclusive BB definition
I played with RDMBBY01 for a while and this is all I could understand (+ my rather negative feelings towards the transaction ). Even if it's not exactly the same case, I think that in RDMBBY01 logic the BUY part should have 4 PC, just to get back the CUP OF COFFEE..
..I'm gonna have one now!
Cheers,
Tomas

Prerequisites for Bonus Buys

On a ECC 6.0 IS Retail client, Im working with promotions and bonus buys.
I can change the level of the bonus buy item itself in the access seq used.
Is there a way to change the level of the prerequisites item for the bonus buy. Currently its based either on Article or Article Grouping. It would be helpful to select by a higher level such as merchandise category hier or merchandise category.
Thanks
Rudy

Hi James,
Pl go to TCode BD50 and choose New Entries Button and add yr message type viz., WPDBBY and save/activate it.
Regards,
S.V.ManiKumaar

Remote Desktop 3.6 fails to save sorting in client list view (on osx10.8)

Hi there,
i have sorted my controlled clients in the "all computers" section via the labels column to group them together by color.
this worked fine in older version of ard. now after upgrading from 3.5 the colors of the computers are preserved, but the column "labels" is disappearing after each restart of ard. and so the entries are always sorted alphabetically by name. I have noticed that the sorting does revert to that "standard" state
whatever the changes I make are. So I assume that ard fails to save the layout in com.apple.RemoteDesktop.plist. I have also removed com.apple.RemoteDesktop.plist from my preference folder to let it regenerate from ard, but the problem stays the same.
Has anyone filed a bugreport abut that behavior jet?
Tanks,
Ben

Hello!
Same problem here for me:
Some ARD clients behind a vpn-tunnel.
ARD admin cpmputer running 10.9.1 and ARD 3.7.1
There is no problem with clients running 10.6.8, 10.7.5 and 10.8.5 with ARD client 3.5.4, 3.7 and 3.7.1
But clients with 10.9.* and ARD client 3.7.* is it impossible to do remote control. It does not matter which color/quality mode i select. The mouse movement is extremly sluggish and lagging - it takes a few seconds until the mouse settles down - I need about 10 seconds to close a window.
Once again all clients are controlled via the same vpn tunnel from the same ARD admin-computer.
Apple has to fix it ASAP. We rely on reliable software products.
Bye,
Christoph

MDT 2012 'Failed to save Environment to (80070057) Error during Windows 7 x64 Pro Deployment

Hi There,
I've been using MDT for a little while now, but I'm having problems successfully deploying an image to a batch of new laptops. The laptop HDD's are completely blank, and I am PXE booting using an x64 Litetouch Image via WDS. I have successfully captured
my image from a reference laptop (the same model that I'm trying to image), and I am now trying to deploy it using a standard client task sequence.
The 'Install operating System' phase seems to go ok, but then sits for quite some time at the 'Applying Unattend.xml' stage, then eventually, I get a general error 'Task Sequence Failed - 80004005'. I then exit MDT (it doesn't reboot as it should), and let
the laptop boot, which it does, and logs straight on into Windows, but gives me error along the lines of 'can't find the litetouch script', which I assume means MDT hasn't been able to copy it across. The laptop is however joined to our domain, and I pretty
much just have to tick the 'require a password to log on to this computer' box in user accounts, and all looks ok.
So in summary, the image is applying, but the laptop is not rebooting and running the final cleanup scripts.
I have already changed the SATA mode to IDE, instead of AHCI, having read this sometimes causes problems. I also read that systems with UEFI BIOS can also cause problems with MDT, but I'm not sure if this is the case.
I have edited my customsettings.ini, to copy log files back to my server, which it has done for me. Having looked at the logs (with CM Trace), I can see these errors:
Failed to save environment to (80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to persist execution state. Error 0x(80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save execution state and environment to local hard disk
TSManager 26/03/2014 15:48:09
1820 (0x071C)
The task sequence execution engine can not reboot the machine because we failed to persist execution environment
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Fatal error is returned in check for reboot request of the action (Restart computer).
Unspecified error (Error: 80004005; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
An error (0x80004005) is encountered in execution of the task sequence
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Task Sequence Engine failed! Code: 80004005
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Any help you can give me would be great, as I'd like to get this process running properly.
Thanks,
Sarah

You don't mention what kind of OS this is (Windows 7 Pro x64?)
This is a known issue/FAQ.
I would recommending using MDT 2012 (update 1) for UEFI machines.
Machines with uEFI 2.3.1 only support Windows 8.x.
http://technet.microsoft.com/en-us/library/hh824898.aspx
Recomendation: Convert the BIOS to CSM and/or upgrade to Windows 8.1 :^)
Keith Garner - keithga.wordpress.com

Importing video through firewire fails to save video

Hello,
I am capturing video from a live event using the import feature of FCPX. I captured 14, one hour talks at a conference and on two of them, it failed to save the captured file to the disk. On both, I have pieces of the talk (7 minutes on one, 5 minutes on the other), but it appears to have stopped importing prematurely after capturing these snippets. Because this was a live conference and I do not have a tape back up, I believe the media is completely lost! One additional note, I was using Adobe Media Encoder throughout the conference and in particular, during the two talks that were not fully imported. Could this be a resource issue where the import locked up and failed to notify me?
Any help the community can provide will be greatly appreciated. While I am almost certain I cannot recover my imported files, I would like to know the source of the issue so I do not experience it again.
Best regards,
SA

Can't say I know 100% what's caused it but persuonally I've notice I can do very little on my 2011 MacBook Pro, especially when rendering, exporting or even something as little as synchronizing a clip. I'm guess that's most likely caused your stoppage.
Honest speaking, though I use FCPX 15-18hrs a day, there is no way in the world I'd trust it to live capture an event, especially not having some form of hard copy solution..! :/
Anyway sorry to hear, nothing worst than having to explain that to a client :(

Is Bonus buy,promotion or sales deal available in IS AFS?

Hello gurus,
Can any one tell me whether the Bonus Buy, promotions or sales Deals available in IS AFS 6.0
Thanks and Regards
Kishore

Hi chandra sekhar,
promotions could be seasonal or any time.i wanted to know wether these sales promotions and bonus buy available in IS AFS
Thanks and Regards,
Kishore

Add fields on Bonus buy screen

Hello,
We need to add two fields on the bonus buy screen (VBK1, also change and display). Does anyone know if it is possible to add own fields either on the header level or item level?
Best Regards,
Ann-Sofie Svensson

Hi All,
THanks for the input. it was really helpful.
I have added two columns in at the ouptput and used exit EXIT_SAPLV60P_012 for passing the data to these new fields.
Only one query left.....
Addition of two fields on the selection screen of VF24.
I know that we can copy the program and do that.....in that case the logic i tried for above mentioned solved requirement was not required .i would have been done that in Zprogram........but i want it to be on std tcode & screen.
Please suggest.
Thanks
RK

Crystal Reports 2011 IDE fails to save active report

Hi,
I've been using CR 2011 to update some previous versions of CR. When I go to save the report 9 out of 10 times it fails to save the active report file and turns the report into a .tmp file. I then have to save the report back to a .rpt file and it is fine and the report still works. But this is driving me nuts. To have to keep on saving as after the IDE fails.
Anyone have any help/suggestions on this.
Thanks,
Jim

hi Jim,
are you using crystal reports for visual studio as the IDE? if so, please repost your question here.
if not (i.e. you are using crw32, the regular crystal reports designer tool), please ensure that you've got the latest sp installed from here. after that, if you still experience the problem please provide a link to one of your reports (e.g. in dropbox) with saved data so that it can be tested by someone else on their version of cr.
thanks,
jamie

OSD - 8007000F " Failed to save current environment block"

Hello,
I have an issue with one of my Task Sequence OSD loads. I am using SCCM 2012 with a CAS trying to load a standalone drive.
The issue that i am having is it fails at the "Formatting C:\"
The logs are posted below.
I have tried to follow this: http://cmsource.net/2014/01/21/another-80070057-fail-apply-operating-system-image-step-in-sccm-2012/ But to no avail. I have tried using Diskpart, running clean cmd, and rebooting. That doesn't seem to help.
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692"
file="instruction.cxx:3011">
<![LOG[Successfully completed the action (Partition Disk 0) with the exit win32 code 0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692"
file="instruction.cxx:3037">
<![LOG[Do not send status message in full media case]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:4736">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=true]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Expand a string: %_SMSTSMDataPath%\Logs]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:782">
<![LOG[Clear local default environment]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:807">
<![LOG[User did not specify local data drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="utils.cpp:1198">
<![LOG[Volume C:\ has 499996389376 bytes of free space]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:360">
<![LOG[Volume C:\ is not bootable]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:366">
<![LOG[Volume D:\ is not a fixed hard drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:341">
<![LOG[Volume E:\ is not a fixed hard drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:341">
<![LOG[Volume X:\ is not a fixed hard drive]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:341">
<![LOG[TSM root drive = ]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:376">
<![LOG[We do not find an available volume to store the local data path]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1" thread="692" file="utils.cpp:1213">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=3]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=3]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692" file="executionenv.cxx:833">
<![LOG[pszPath[0] != L'\0', HRESULT=80070057 (e:\nts_sccm_release\sms\framework\core\ccmcore\path.cpp,60)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0"
thread="692" file="path.cpp:60">
<![LOG[Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,655)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager"
context="" type="0" thread="692" file="environmentlib.cpp:655">
<![LOG[Failed to save environment to (80070057)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="2" thread="692" file="environmentlib.cpp:673">
<![LOG[TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\executionenv.cxx,842)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager"
context="" type="0" thread="692" file="executionenv.cxx:842">
<![LOG[Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="3" thread="692" file="executionenv.cxx:842">
<![LOG[SaveEnvironment(), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\executionenv.cxx,420)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context=""
type="0" thread="692" file="executionenv.cxx:420">
<![LOG[Failed to persist execution state. Error 0x(80070057)]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="2" thread="692" file="executionenv.cxx:426">
<![LOG[Failed to save execution state and environment to local hard disk]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="2" thread="692" file="engine.cxx:250">
<![LOG[Start executing an instruciton. Instruction name: Apply Operating System. Instruction pointer: 3]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="1"
thread="692" file="engine.cxx:117">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Apply Operating System]LOG]!><time="13:51:50.375+480" date="10-10-2014" component="TSManager" context="" type="0" thread="692"
file="executionenv.cxx:668">

Sounds like your disk and/or disk controller isn't recognized during WinPE phase. Just download drivers needed from Lenovo, and put them in your boot image. Most off time only NIC and disk controller drivers are needed there. Hope it helps!
Just have a look to my blog for importing Lenovo drivers in SCCM easily:
http://henkhoogendoorn.blogspot.nl/2014/02/good-news-when-you-are-using-mdt-andor.html
My blogs: Henk's blog | Follow Me on:
Twitter | View My Profile on:
LinkedIn

Fail to save the Bonus Buy (RDMBBY01)

Similar Messages

Maybe you are looking for