Fail to transfer from FCP

Hi all,
I will try my best to be clear... In FCP7, when I send an audio track to SoundtrackPro, only the video appears in ST, no audio track. I did the update of ProKit7. It's a new installation so I cannot tell if it was working before since it's the first time I am trying it.
I am a regular user of FCP. I did a lot of movies with it. I own another station with FCP6 and it is flawless. I just bought this new 12 core station with 24GB of RAM, full equip ($25,000) and I have some problems with it. Like this one with SoundtrackPro.
Any clue?

Hello, ho_ho.
Thank you for the question. You might find this article helpful with your encrypted backup issue.
iTunes: About iOS backups
http://support.apple.com/kb/HT4946
Hope this helps,
Jason H.

Similar Messages

Transfer from FCP to Motion with video effect

I am trying to transfer a clip from fcp that has a video effect (matte) wehn I open it in motion the matte is no longer there, how to I transfer the clip into motion with the effect still intacted?

None of your effects will carry over to Motion. Speed changes, color corrections, keys, etc... Why? See this:
http://discussions.apple.com/thread.jspa?messageID=1375867&#1375867
You can do as avidvid says and export to "fix" your effects then bring the file back in, but that won't carry the alpha over...
Patrick

Audio transfer from fcp

i have a couple of questions. sent one channel of audio to stp and it opens there as stereo. how to stop that?
i can't seem to send a portion of a clip. stp keeps downloading the entire thing w/ the video. i am new at stp and i want to practice w/ small segment of audio.

Take a look at the manual.
There are two ways to "send" to STP. One is sending a single clip, the other is sending the entire multitrack.
a track shows up in STP in stereo only because that's what it was originally. A stereo track has two channels, left and right-unlike FCP where every channel is on a separate track. It all makes sense when you look at it from a sound for picture mixing perspective.
You need to decide what you're going to do first, and then send it to STP in the appropriate manner.

Migration Assistant fails to transfer from PowerPC G4 to MacBook Air

WiFi data transfer on home network server linking PowerPC G4 12" OS 10.5.8 using Migration Assist v 1.2.4 does not link with MacBook Air OS10.8.2 MA v5. Spinning clocks on both, but Air recognizes name of G4 machine. Time machine drive is firewire 800

Apple support: "Sorry, migration assistant WiFi won't work for OS 10.5.8 Leopard to OS 10.8.2 Mountain Lion, you need to buy an adaptor, Firewire to Thunderbolt, and use your Firewire cable and Target Disk mode." So much for the easy button.
Drove to town, bought the adaptor, but apparently not all Firewire is the same, Powerbook G4 firewire port and adaptor firewire dont mate. Out $32 bucks, gas, and lost the time saved up to fix the shower faucet. Grrr
Need ideas; move the Powerbook G4 files to iMac 27 and then to Macbook Air via WiFi and migration assistant? Move to USB external drive and then to Macbook Air in Target disk mode using migration assistant?, can Target Disk mode use USB? or mirror the G4 drive to USB drive? or?
Welcome suggestions . . .

I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

I was transering my album from version 10 to version 11. I got on-line help and I and all set. Thanks for getting back to me. Dave
Scott V <[email protected]> wrote:
Scott V http://forums.adobe.com/people/Scott+V created the discussion
"Re: I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?"
To view the discussion, visit: http://forums.adobe.com/message/5105851#5105851

HT204350 New Macbook Pro bought December 2013. Transferred everything from Timemachine backup from Macbook Air with 10.6.8. Failed to transfer "network settings". PROBLEM: neither account can log in. It shakes and refuses (the correct) password. Help

New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!

New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!

Log and Transfer Crash FCP 6.06, from Canon Vixia HF20

I am having a strange problem in logging and transferring from FCP 6.06. I have been logging and transferring from my Canon Vixia HF20 without any problems for monthes. Then I have been granted access to a Sony HXR-NX5U NXCAM from work, I logged and Transferred from the flash memory unit HXR-FMU128, without any problems. But ever since I logged and Transfered from the sony flash unit, in attempting to log an transfer from my Canon Vixia has caused FCP to crash every single time. I then log and transfer again from the Sony Flash unit without any problems, after having dealt with the Canon transfer crashes.
Currently log and transfer from Song Flash unit always works, from Canon Vixia never works in FCO 6.06.....boooOOO!
Anyone else experience a problem like this?

Hi Eugene
Seems like maybe your FCP's preferences have taken a turn for the worse ... at least I haven't heard of this being a widespread issue so I would recommend you start by using a free app like Digital Rebellion's Preference Manager to make a backup copy of your current FCP user preferences, then use the same Preference Manager app to "trash" those existing prefs. Now restart FCP and see if the problem still persists .. hopefully not. If the problem is still there then you can use Preference Manager (again) to restore your previous prefs from the backup copy you made ... and you are back where you started.
Post back
Andy

Export Using Compressor from FCP fails every time

When I try to use the File>Export>Using Compressor command in FC Studio 2, everything seems normal until I submit the batch. But the job fails every time.
I get the following message: "Processing service request error: Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server".
I've gone through all the discussion stuff on how Compressor needs to be reinstalled and all that. That's not my problem here. Compressor will work fine if I use it standing alone. It's only if I try to use the FCP export that this problem occurs.

Compressor works fine as a stand alone when I import a Quicktime file. However, if I try to export a suquence directly from FCP, it gives me a message "File Error: A file of this name already exists". If I press okay it exports it to Compressor which gives me a message, "Can't preview movie Final Cup Pro App is busy".
Then when I go ahead and load the output settings into compressor ( actual compressor window shows the sequence as being loaded) it starts to render and then it stops with the following message logged
"Name: MPEG-2 6.2Mbps 2-pass
Time Elapsed: 0:00:00
Time Remaining: 0:00:00
Percent Complete: 100
Status: Failed - Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server"
Any ideas what the problem might be?
I am using a Mac Pro 8 core with 9gigs of ram and running tiger 10.4.10 and this is FCP Studio 2

SONY XDCAM LOG and TRANSFER CRASHING FCP

I am trying to log and transfer xd cam footage. every time i open the log and transfer window, FCP crashes. What is the cleanest way to get rid of the xdcam plugin.
the error message reads:
The application Final Cut Pro quit unexpectedly after it was relaunched. The problem may have been caused by the SonyXDCAM plug-in.
I have tried to get rid of it and obviously failed because i keep getting that message which tells me it's still there.
Can someone give me a step by step on how to get rid of it?
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz

Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

AVCHD Log and Transfer Crashes FCP

We've got one machine in our facility that flat refuses to transfer AVCHD clips from the SD card.
We've tried all the usual fixes (Removing Perian which wasn't even on the machine, but I did install it then uninstall it to see if that might help!) Know about the FX Factory update but it's not on the system. I've tried different settings in the L&T prefs such as removing duplicate frames, different capture codecs etc. Nothing works.
So the symptoms are, you can see all the clips no problem, but as soon as you add one to the queue, you get a brief period of nothing, then the beach ball for about 5 seconds then a 'poof' crash of FCP. Tried capturing from 2 card reader, direct from the camera...zilch, crashes everytime without fail...sorry, with fail!
Machine spec:
FCP 6.0.5 (Can't update to 6.0.6 because of my RAID and server config)
Mac Pro Intel Dual Core Xeon 3GHz
4 MB RAM
Black Magic Extreme HD SDI card
Mac OSX 10.5.5 (again cannot update because of my XSAN config)
Help appreciated...

Hi DevRona, welcome to the Apple Discussions forum for FCP
buzz online is that perian the add on for quicktime has something to do with it. but i cannot even find it on my system!
Perian is a 3rd party component and is not installed unless you installed it yourself
...mine crashes after that balloon thing appears...
If you want apt advice then you need to be clear and concise in your description of your problem
what am i doing wrong
Start a new thread, don't piggyback someone else's. List all your pertinent hardware and software specs. Take your time to clearly describe the problem as best you can ... remember that none of us are there and can see what you may or may not be doing wrong. If you do that then there is a good chance that folks here will do their level best to help you.
Best
Andy

Sony EX XDCAM from FCP MAC cannot be recognized by PC

Not sure if this is a quick fix, but my CGI guy - who works by remote - cannot get his PC to recognize my XDCAM EX 108024p clips from my MAC - which I have exported as MXFs using the SONY XDCAM export option in Export>using qt conversion. I sent him the link to the driver, and he said it installed fine - but still his computer was not recognizing the MXF file. Does he need a program to convert?
Basically, I am looking for a lossless way to give him my Sony EX1 files that he can work with on his PC (in studio max) and then export to a lossless format that I don't have to render in FCP.
Any tips or suggestions most welcome. This is my first time editing a program with EX 1 files in FCP.

I'm using the Sony XDCAM transfer 2.5.1 to bring in the clips from card into FCP. The clip browser I downloaded yesterday and I tried to get it to recognize an MXF file that I had exported from FCP using the sony xdcam plug-in (but it did not). I guess I can only use the MP4s to convert to MXF? Is there a difference going from FCP compared to Clip Browser? I want to be able to export cut sequences so that the CGI guy can composite...
Message was edited by: thecuz

Sending multitrack Project from FCP to STP on another computer doesn't work

Hello,
I attempted to search the forums but can't find my specific problem mentioned. I apologize if I overlooked it!
I am attempting to send a Soundtrack Pro Multitrack Project from Final Cut Pro 6.01 to Soundtrack Pro 2.01 on another computer. When I do, the video comes through fine but the audio fails to transfer over.
Here's what I did:
First I open the Final Cut Project, highlight all the clips in the sequence to send and click "Send to Soundtrack Pro MultiTrack Project". I select all options including the "Fully Rendered Video" Option. This project opens up great in Sound Track Pro on the original computer. In Soundtrack Pro I "save as" and make sure I select "Collect Audio Files", "Collect unused audio files", & "Collect Video File". As far as I have read, this should be all I need to make sure all of the audio and video clips transfer together with the STP file.
However, when I place this folder (including the media files) on a external hard drive and transfer it on to our other computer (set up for audio recording and editing) and open it up in STP I get no audio. The clips visually transfer and all the clip lengths match up with the video, however there is no waveform showing. A straight line at 0db is all that shows up. I check the clips in the bin and they show the same file size as on the first computer. When I select an audio clip and take a look at the actions tab it shows the name of the clip and under it it says "insert silence" (which was not there on the original computer). When I de-select the insert silence the audio still does not play (the straight line on the waveform disappears). I try deleting the "insert silence" action and the same thing happens.
I have tried doing this operation mulitple ways with the same result. Am I doing something wrong? The only thing I can think of is the file starts out on OSX 10.4.11 and is transfered over to leopard 10.5. I just tried doing the reverse operation (creating the file from the audio computer and sending it to the video computer) and everything works fine. No idea what this means. I need this to work the other way around so I can begin the extremely intensive audio work on this film while our editor continues the video edits so thank you very much for any help that you can lend me. It is greatly appreciated.
-Matt

Could be a difference in OS's causing the problem, but I can't say for sure. You could try using the OMF export option instead. I almost guarantee it will work.

Material transfer from SAP R/3 to SAP Business One is blocked

Hello experts,
Please I need your help for the following scenario:
Our client has B1iSN and SAP R/3 in the headquarter company and B1if and SAP B1 in the subsidiary. The material transfer from SAP R/3 to SAP Business One failed and the following message is diplayed:
Result message :
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error: (-2028) No matching records found (ODBC -2028)
The Material database transfer is blocked due to message in status
failure which block all other messages.
We tried to restart the server (Business One and B1iSN) but it didnu2019t solve the issue.
Any idea please? Thank you.

Hi Nadia,
did you check the WRITE-POLICY settings of your scenario?
when reading the displayed DI Error message, it looks like B1iSN is trying to update an B1 item which does not exists.
Please open SAP B1iSN Tools -> Development Tools -> Graphical scenario Design and select your Bizpackage, BizStep and BIUMETA.
Open the WRITE-POLICY symbol and check the entries:
Insert on Exist = error or fallback2U
Update on Miss = fallback2I
The Update Policy should stay to value regular.
To activate changes of the WRITE-POLICY please deactivate, modify and reactivate your Business Process instance.
If a WRITE-POLICY change has no effect, please check your data mapping (BIU) and especially the parameter <QueryParams>, which mustn't be filled for "insert/Add" operations into B1.
Best regards
Bastian

Can anyone explain the mechanism of data transfer from r3 to bw?

Hi all the bw expert,
i have one question on the mechanism of data transfer from r3 to bi 7.0. the followings is my concerns:
scenario:
The total numer of data is 1000 rows and these rows are seperated into 10 data package , each package contains 100 rows.
Now bw is trying to recieve these 10 packages from r3 in sequence.
When 5 data packages have been transfer to bi psa. the network is broken and the tranfer is canceled at the 6th data package.
What i want to konw is when the network is reconnected ,Does the transfer start from the 6th data package?
Please help me to explain all these. Is there any material or links can be used to understand this feature?
Thanks ahead.
Jinwei Zhang
From Beijing China

Hi......
Connection broken means load failed.......extraction is cancelled.......
If your load is delta........then make the QM status red in the Infopackage........and repeat the load........
If your load is full........(in case of full upload it is not mandatory to make the QM status red..........but ii is a good practice to make the qm status red)
then repeat the load........
But before repeating the load plz check the connection in SM59............if it is ok then repeat..........otherwise wait for som time.......If still in connection is not ok then contact basis people.....
Regards,
Debjani.......
Edited by: Debjani Mukherjee on Oct 6, 2008 7:02 AM
Edited by: Debjani Mukherjee on Oct 6, 2008 7:04 AM
Edited by: Debjani Mukherjee on Oct 6, 2008 7:09 AM

Getting error in file transfer from one system to another system

Hi All
One of my client (User) wants to transfer his file from SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the program he is getting error "File Transfer Failed due to Network chk with Admin"
I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Please help me to resolve this problem. I any detail require I will provide the same.

Guruprasad Wrote:
He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
Regards,
Raghu

Fail to transfer from FCP

Similar Messages

Maybe you are looking for