Fail Transfer VG 224
Hola
Tengo un VG 224, con sccp, el problema que tengo es que cuando quiero trasferir una llamada, si no la contestan la llamada se regresa al telefono desde donde la transferi.
Tengo la llamada, marco flash, me da tono de marcado, marco la extension, escucho que llama y cualgo, despues de colgar como a un segundo y se me regresa la llamada.
Si espero a que me contesten, la llamada pasa sin problemas.
Version del VG
vg224-i6k9s-mz.151-1.T2.bin
Config
Building configuration...
Current configuration : 7938 bytes
! Last configuration change at 07:34:16 UTC Fri Mar 5 1993 by sonda
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname MERVG01C
boot-start-marker
boot-end-marker
no aaa new-model
ip source-route
ip cef
no ipv6 cef
stcapp ccm-group 1
stcapp
stcapp feature access-code
prefix *
call forward all 2
call forward cancel 3
pickup local 17
pickup group 18
pickup direct 19
stcapp feature speed-dial
redial 9
digit 2
speed dial from 1 to 9
stcapp supplementary-services
port 2/0
hold-resume
fallback-dn 5414
port 2/1
hold-resume
fallback-dn 5456
port 2/2
hold-resume
fallback-dn 5457
port 2/3
hold-resume
fallback-dn 5458
port 2/4
hold-resume
fallback-dn 5459
port 2/5
hold-resume
fallback-dn 5460
port 2/6
hold-resume
fallback-dn 5461
port 2/7
hold-resume
fallback-dn 5462
port 2/8
hold-resume
fallback-dn 5463
port 2/9
hold-resume
fallback-dn 5406
port 2/10
hold-resume
fallback-dn 5429
port 2/11
hold-resume
fallback-dn 5430
port 2/12
hold-resume
fallback-dn 5431
port 2/13
hold-resume
fallback-dn 5432
port 2/14
hold-resume
fallback-dn 5433
port 2/15
hold-resume
fallback-dn 5434
port 2/16
hold-resume
fallback-dn 5435
port 2/17
hold-resume
fallback-dn 5441
port 2/18
hold-resume
fallback-dn 5442
port 2/19
hold-resume
fallback-dn 5444
port 2/20
hold-resume
fallback-dn 5413
port 2/21
hold-resume
fallback-dn 5422
port 2/22
hold-resume
fallback-dn 5423
port 2/23
hold-resume
fallback-dn 5424
voice dsp release early
voice-card 0
username sonda privilege 15 secret 5 $1$XEKn$S4vVhdGL43Zu5PqHmhlOw1
interface FastEthernet0/0
description Voice Interface
ip address 10.5.185.250 255.255.255.0
duplex full
speed 100
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.5.185.254
control-plane
voice-port 2/0
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5414
caller-id enable
voice-port 2/1
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5456
caller-id enable
voice-port 2/2
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5457
caller-id enable
voice-port 2/3
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5458
caller-id enable
voice-port 2/4
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5459
caller-id enable
voice-port 2/5
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5460
caller-id enable
voice-port 2/6
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5461
caller-id enable
voice-port 2/7
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5462
caller-id enable
voice-port 2/8
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5463
caller-id enable
voice-port 2/9
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5406
caller-id enable
voice-port 2/10
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5429
caller-id enable
voice-port 2/11
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5430
caller-id enable
voice-port 2/12
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5431
caller-id enable
voice-port 2/13
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5432
caller-id enable
voice-port 2/14
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5433
caller-id enable
voice-port 2/15
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5434
caller-id enable
voice-port 2/16
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5435
caller-id enable
voice-port 2/17
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5441
caller-id enable
voice-port 2/18
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5442
caller-id enable
voice-port 2/19
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5444
caller-id enable
voice-port 2/20
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5413
caller-id enable
voice-port 2/21
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5422
caller-id enable
voice-port 2/22
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5423
caller-id enable
voice-port 2/23
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5424
caller-id enable
sccp local FastEthernet0/0
sccp ccm 10.5.62.235 identifier 2 version 7.0
sccp ccm 10.5.185.254 identifier 4 version 7.0
sccp ccm 10.5.62.234 identifier 3 version 7.0
sccp ccm 10.5.15.253 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate ccm 4 priority 4
dial-peer voice 100 pots
service stcapp
port 2/0
dial-peer voice 101 pots
service stcapp
port 2/1
dial-peer voice 116 pots
service stcapp
port 2/16
dial-peer voice 117 pots
service stcapp
port 2/17
dial-peer voice 118 pots
service stcapp
port 2/18
dial-peer voice 119 pots
service stcapp
port 2/19
dial-peer voice 120 pots
service stcapp
port 2/20
dial-peer voice 121 pots
service stcapp
port 2/21
dial-peer voice 122 pots
service stcapp
port 2/22
dial-peer voice 123 pots
service stcapp
port 2/23
dial-peer voice 102 pots
service stcapp
port 2/2
dial-peer voice 103 pots
service stcapp
port 2/3
dial-peer voice 104 pots
service stcapp
port 2/4
dial-peer voice 105 pots
service stcapp
port 2/5
dial-peer voice 106 pots
service stcapp
port 2/6
dial-peer voice 107 pots
service stcapp
port 2/7
dial-peer voice 108 pots
service stcapp
port 2/8
dial-peer voice 109 pots
service stcapp
port 2/9
dial-peer voice 110 pots
service stcapp
port 2/10
dial-peer voice 111 pots
service stcapp
port 2/11
dial-peer voice 112 pots
service stcapp
port 2/12
dial-peer voice 113 pots
service stcapp
port 2/13
dial-peer voice 114 pots
service stcapp
port 2/14
dial-peer voice 115 pots
service stcapp
port 2/15
Gracias
Hey,
I think you have a better chance to get help if you write in english.
I ran your post trough Google translate and if I have understood your question correct I think you should try to add this command under your dial peers for the SCCP FXS ports.
no tone dialtone remote-onhook
Please remember to rate helpful responses and identify helpful or correct answers.
Similar Messages
-
IMac freezing after start because of failed transfer
Hello,
Last night I tried transferring two videos over a network which ended up failing. Not thinking much about it, I just placed those two video files on that local computer to just do a usb transfer this morning. Well, getting to the target computer, I notice something like the picture attached.
It is like the computer saw the failed transfer and kept trying to do the transfer. Also, mouse is still working. I just cannot use the dock, finder, or any other application.
I have tried safe booting, this works but obviously you do not want to stay in safe boot. I have repaired the disk and noticed a speed jump in startup which was nice but ultimately did not fix my issue. I have tried restarting (obviously) which did not help my problem.
Any other ideas? Would love to get this up and rolling for this is my editing machine.
Thanks for any input you have.Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
Hard Drive Fail - Transfer Purchased not working
Hi
The hard drive on my 3 year + 2 month old Macbook Pro died a week ago (2 months out of its extended warranty, not that it cost a lot to repair). My back-up included 99% of the files on the drive. Between my back-up and managing to access the disk from another drive I've got 99% of my iTunes library. Just the one album has a lot of its tracks missing (A favourite.. you might know. Seethers Deluxe Holding Onto Strings).
I've had the Macbook repaired and it's back and working fine. I've reauthorized it ... got a message saying "Including this computer you have authorized one of your five" so I'm assuming it's picked up that it's the same device. If I click on "Add or edit my products" under this discussion dialogue, it shows just the one MacBook Pro which suggests this is so.
OK... so.. I hook up the iPhone (where the album is complete) and in iTunes (11.0.4) choose "Transfer Purchased Files". I don't get any messages to confirm or deny anything nor any feedback to suggest real activity. The album in iTunes remains incomplete.
iTunes lists all the tracks, but against some, instead of the track number, there is a circle with an exclamation mark in it. I get a message about the original file being missing (which they are.. I've checked the music directory) if I attempt to play them.
I've been onto the store, revisiting where the album is still available and there appears to be no download option, just "play".
So... what do I do? I'm wondering if I should delete the songs from iTunes so they're completely absent, no markers even, but I'm a bit concerned this'll worsen things. If someone can reassure me or advise me what else I should do, that'd be really cool.
Thank you.
All began with a 11fx ... Macbook P i7 17" (10.7.5), iPhone 4, iPad 3 iOS 6.0
Newly purchased MacMini i7 (10.8.4) c/w Cintiq HD24. Looks like NASA central!Ok, solved. Third party app.
-
Navigator - failed transfer of Route 66 maps to mi...
Have backed-up the existing card using PC Suite and transfered that to the new ( Sandisk 4mb microsd )card. Then on attempting to transfer the backup made on Route 66 sync I get ......... Access to path 'F:\system\apps\Navigator\Data\imei.dat' is denied !!!
Can anyone help please - I've garnered as much info a poss by googling and with these support pages.When you say "navigator", you are talking about 6110?
The technical specifications say that the phone supports only 2GBytes. Are you sure your memory is working fine? Have you tried to fill it up? -
A failed transfer: music folder
Hello, everyone!
I'd been trying to transfer the music from my iTunes to my iPad mini Music folder. When I finally succeeded, I jumped the gun and didn't realise that the whole of my music collection would be then transferred to my iPad. Instead of waiting for it all to finish and then delete the files either colelctively or individually, I cancelled the sync / transfer. Now, my Music folder features many an artist, many a song and many an album that actually don't exist on it. I've attempted deleting them, but it isn't possible.
Ideally, I'd like my Music folder to be empty again, after which I'll decide on music I want in it and do it all properly. H-E-L-P! It's really annoying, looking at all of these titles and knowing they can't actually be played..
Thanks in advance. Any help would be highly appreciated.Hi Ganesh1960,
To transfer music folder from Itunes to Iphone,you muse to use a professional Iphone music transfer software. It can transfer music, movies, videos, photos, SMS, contacts and other files from iPhone to computer.
Easy to use, works very well. -
Hard drive failed, transfer ipod classic & ipad back to new drive?
Our windows laptop died and of course we replaced it with a macbook. have both an ipod classic and an ipad with music and apps that need to get on the new macbook. do it myself and how? or just let a genius do it? will they if i bought the mac from amazon?
For your iPad, you can connect to iTunes while holding the command and option keys down until the iPad appears under devices in iTunes. This will prevent syncing. Then use the iTunes File menu > Transfer purchases from XXX's iPad.
This $20 app for your iMac will allow you to transfer any non-iTunes Store music and videos to your iMac: http://www.ecamm.com/mac/phoneview/
This app can transfer music and videos from your iPod Classic: http://www.fadingred.com/senuti/ There is a 30 day/1000 song free trial period. -
No memory after a failed transfer
While trying to transfer my files from my old Mac, it stalled for over 24 hours. I couldn't do anything with either Mac so I had to cancel the transfer. Now my Mac Book Pro has no memory left. I would like to know how to correct the no memory problem. Any help would be appreciated. Thanks.
If by memory you are referring to the lack of free disk space, you can find some help at http://www.thexlab.com/faqs/lackofram.html
-
Lost outlook express mail boxes and failed transfe...
I have just joined BT from orange (I had a wanadoo email address). I've lost the previous contents of OE mail boxes. Any ideas how I might recover. Also followed the instructions for transferring contacts and got message 'cannot read file' or words to that effect. Help please?
1. If you are lucky your old OE files may still be in the recycle bin on your C: drive so look there first.
I suspect you used the BT disk or similar to setup access to BT and it may have screwed up your existing settings.
If they are there I can tell you how to restore them.
If they are not there look at
c:\documents and settings \{your username on PC}\local settings\Application Data\Identities\{ an identifier}\Microsoft\Outlook Express
where the bits in {} are unique to your machine.
You should find a file for each of your email folders.
Let us know how big the Inbox.dbx file is and any other Inbox.xxx file.
2. Waste of time.
3. I strongly recommend that you use Outlook Express to get your emails from BTYahoo. If you want help here let me know. Note that you can still use OE to get emails from your old provider. -
Migration Assistant fails after showing 157 KB or 0 KB to transfer
I spent 4 days trying to get OS X Migration Assistant to successfully migrate between two desktop machines, both running Mavericks 10.9.3.
The two machines were connected by an ethernet cable, and all migrations would fail after 16-24 hours, with the progress bar stalling out at "Less than one minute remaining".
Before every failed transfer, Migration Assistant would inaccurately show "157 KB selected" for transfer if the "Computer & Network Settings" option was checked, or "0 KB selected" for transfer if only the "Applications" or "Documents & Data" options were checked.
I finally realized that the migrations were failing because I was opening and clicking through Migration Assistant on both the source and target machines at around the same time.
The eventual solution was to open Migration Assistant on the source machine first, and click through as far as I could until the source machine was actively looking for other machines on the network.
As long as I waited until then to open Migration Assistant on the target machine, it would correctly calculate the size of the files to be transferred and the migration would succeed.
So, the order in which you open Migration Assistant seems to make a big difference: source first, then target.
My problem is solved, but only after several days of hassle, so I wanted to post this in case other people had a similar issue.
(I tried many suggested fixes that did not work, included reinstalling OS X on the target machine, running disk repair and fixing permissions on both source and target, changing file sharing on the source machine to include the whole drive, trying to migrate Applications and Documents & Data separately, turning off wifi before the transfer, etc.)Thanks for posting this. I was having the same problem. You saved me hours, maybe days, of frustration!
-
my iphone sync'd and failed transfer photos to my computer. i have not been able to complete a successful sync since 30 min ago. i need a successful sync in which my photos will transfer to my computer help please
Syncing is used to transfer photos FROM THE PC TO THE IPHONE. Syncing will not transfer photos from the iPhone to the computer.
To copy photos from the iPhone to the computer connect your iPhone to the computer and start what ever image capture or camera application you might have on your computer. Your iPhone should be recognized as a camera and allow the application to copy photos from the Camera Roll on your iPad to the computer. You also have the option to keep the photos on the iPhone or delete them. Choose widely.
Once the photos are on your computer you can organize them into albums. Once you do that you can sync the albums you want back to your iPhone. They will be kept in albums on the phone and not in the Camera Roll. -
Run time error while activating the Transfer Rules
Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
KishoreHi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma -
Loop at field-symbol (any table) into string ?
Hi Everyone,
I need little help, I have a requirement to extract table content with columns names as the header.
After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through
a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can
write to the file.
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
>>>>>>> LOOP at <table> into line. >>>>>>>>>>>> " Here the code breaks and fail
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
Exception Message
|Error analysis |
| You attempted to move one data object to another. |
| This is not possible here because the conversion of a data object |
| of type "v" to type "C" is not supported. |
| |
| List of internal ABAP types: |
| |
| C Text (Character) |
| N Numerical text |
| D Date (YYYYMMDD) |
| T Time (HHMMSS) |
| X Hexadecimal |
| I Integer |
| P Packed number |
| F Floating point number |
| |
| h Internal table |
| r Object reference |
| l Data reference |
| g String of type C |
| y String of type X |
| s 2-byte integer with plus/minus sign |
| b 1-byte integer without plus/minus sign |
| u Structure (flat structure) |
| v Structure (deep structure) |Hi Everyone, I need little help, I have a requirement to extract table content with columns names as the header. After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can write to the file.
thie is the code
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP at <table> into line. " Fail here
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
and this is the exception:
Error analysis
You attempted to move one data object to another.
This is not possible here because the conversion of a data object
of type v to type C is not supported.
Edited by: Misbah on Jan 7, 2010 11:50 PM -
Purpose of RSTXTRAN program for SAP-Script ?? ??
Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha -
TS1591 my ipod touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM
touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM
Did you fail transfer all purchases to your computer before attmeoting to update? not good. ''You can redownload some itunes purchases in some contries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You will need to restore. If you are unable then read this:
iOS: Unable to update or restore -
Cache.cluster.multicast.ip and Installing Oracle Identity Analytics
After following the configuration steps outlined below, and deploying the war to Glassfish, I get an error starting RBACX that I think must be related to the cache.cluster.multicast.ip property settings below (error log follows the configuration step outlined next):
7.Make the following changes if there are multiple instances of Oracle Identity Analytics, standalone or clustered, on the same subnet.
a.Navigate to rbacx_staging/WEB-INF directory.
b.In a text editor, open application-context.xml, find bean id commManager, and examine the constructor-arg value.
c.Set the constructor-arg value with a unique instance name, e.g. value="SRM-Instance-1".
d.In a text editor, open search-context.xml, find bean id searchConfiguration, and examine the constructor-arg value.
•The deployment is a standalone, constructor-arg defaults to a value of 0, which is specified as value="0".
e.Navigate to rbacx_staging/WEB-INF/classes directory and do the following:
i.In a text editor, open oscache.properties (located in the rbacx_staging/WEB-INF/classes directory), and find the cache.cluster.multicast.ip property.
ii.Uncomment cache.cluster.multicast.ip by removing the # at the start of the line. Each Oracle Identity Analytics instance requires a unique cache.cluster.multicast.ip value.
rbacx.log
10:28:41,357 INFO [Config] OSCache: Getting properties from URL file:/C:/Program%20Files/glassfish-v2.1/domains/domain1/applications/j2ee-modules/rbacx/WEB-INF/classes/oscache.properties for the default configuration
10:28:41,359 INFO [Config] OSCache: Properties read {cache.cluster.multicast.ip=231.12.21.135, cache.event.listeners=com.opensymphony.oscache.plugins.clustersupport.JavaGroupsBroadcastingListener,com.opensymphony.oscache.extra.CacheMapAccessEventListenerImpl}
10:28:41,360 INFO [GeneralCacheAdministrator] Constructed GeneralCacheAdministrator()
10:28:41,360 INFO [GeneralCacheAdministrator] Creating new cache
10:28:41,377 INFO [AbstractBroadcastingListener] AbstractBroadcastingListener registered
10:28:41,379 INFO [JavaGroupsBroadcastingListener] Starting a new JavaGroups broadcasting listener with properties=UDP(mcast_addr=231.12.21.135;mcast_port=45566;ip_ttl=32;mcast_send_buf_size=150000;mcast_recv_buf_size=80000):PING(timeout=2000;num_initial_members=3):MERGE2(min_interval=5000;max_interval=10000):FD_SOCK:VERIFY_SUSPECT(timeout=1500):pbcast.NAKACK(gc_lag=50;retransmit_timeout=300,600,1200,2400,4800;max_xmit_size=8192):UNICAST(timeout=300,600,1200,2400):pbcast.STABLE(desired_avg_gossip=20000):FRAG(frag_size=8096;down_thread=false;up_thread=false):pbcast.GMS(join_timeout=5000;join_retry_timeout=2000;shun=false;print_local_addr=true)
10:28:41,654 WARN [Configurator] NAKACK property max_xmit_size was deprecated and is ignored
10:28:41,674 WARN [Configurator] FRAG property down_thread was deprecated and is ignored
10:28:41,674 WARN [Configurator] FRAG property up_thread was deprecated and is ignored
10:28:41,688 WARN [Configurator] GMS property join_retry_timeout was deprecated and is ignored
10:28:41,715 WARN [UDP] receive buffer of socket java.net.DatagramSocket@3734fc1a was set to 64KB, but the OS only allocated 64KB. This might lead to performance problems. Please set your max receive buffer in the OS correctly (e.g. net.core.rmem_max on Linux)
10:28:41,715 WARN [UDP] receive buffer of socket java.net.MulticastSocket@77932b46 was set to 80KB, but the OS only allocated 80KB. This might lead to performance problems. Please set your max receive buffer in the OS correctly (e.g. net.core.rmem_max on Linux)
10:28:41,723 WARN [UDP] failed to join /224.0.75.75:7500 on net5: java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
10:28:41,723 WARN [UDP] failed to join /224.0.75.75:7500 on eth4: java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
10:28:41,724 WARN [UDP] failed to join /224.0.75.75:7500 on net9: java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
10:28:41,724 WARN [UDP] failed to join /224.0.75.75:7500 on net10: java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
10:28:41,724 WARN [UDP] failed to join /224.0.75.75:7500 on net11: java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
10:28:43,768 INFO [JavaGroupsBroadcastingListener] JavaGroups clustering support started successfully
10:29:14,732 INFO [ContextLifecycleListener] Sun Role Manager (build: 5.0.2.20100125_69_7083) Started
10:29:14,953 WARN [SearchIndexStartupRunner] Indexes are not consistent.
10:29:14,953 WARN [SearchIndexStartupRunner] We will rebuild indexes now.
10:29:19,694 ERROR [ContextLoader] Context initialization failed
org.springframework.jdbc.BadSqlGrammarException: SqlMapClient operation; bad SQL grammar []; nested exception is com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in com/vaau/rbacx/dao/ibatis/maps/BaseAttributeWrapper.xml.
--- The error occurred while applying a parameter map.
--- Check the BaseAttributeWrapper.findAttributeValuesMaxIdWithNullHash-InlineParameterMap.
--- Check the statement (query failed).
--- Cause: java.sql.SQLSyntaxErrorException: ORA-00904: "HASH_VALUE": invalid identifier
at org.springframework.jdbc.support.SQLErrorCodeSQLExceptionTranslator.doTranslate(SQLErrorCodeSQLExceptionTranslator.java:220)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:72)
at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:212)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:271)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:265)
at com.vaau.rbacx.dao.ibatis.SqlMapBaseAttributeWrapperDao.findAttributeValuesMaxIdWithNullHash(SqlMapBaseAttributeWrapperDao.java:280)
at com.vaau.rbacx.core.metadata.manager.MetadataManagerImpl.findAttributeValuesMaxIdWithNullHash(MetadataManagerImpl.java:115)
at com.vaau.rbacx.system.bootstrap.AttributeValueHashCheckStarupRunner.runStartupItems(AttributeValueHashCheckStarupRunner.java:36)
at com.vaau.rbacx.system.web.bootstrap.SrmContextLoaderListener.onApplicationEvent(SrmContextLoaderListener.java:61)
at org.springframework.context.event.SimpleApplicationEventMulticaster$1.run(SimpleApplicationEventMulticaster.java:78)
at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
at org.springframework.context.event.SimpleApplicationEventMulticaster.multicastEvent(SimpleApplicationEventMulticaster.java:76)
at org.springframework.context.support.AbstractApplicationContext.publishEvent(AbstractApplicationContext.java:274)
at org.springframework.context.support.AbstractApplicationContext.finishRefresh(AbstractApplicationContext.java:736)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:383)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4632)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:5312)
at com.sun.enterprise.web.WebModule.start(WebModule.java:353)
at com.sun.enterprise.web.LifecycleStarter.doRun(LifecycleStarter.java:58)
at com.sun.appserv.management.util.misc.RunnableBase.runSync(RunnableBase.java:304)
at com.sun.appserv.management.util.misc.RunnableBase.run(RunnableBase.java:341)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in com/vaau/rbacx/dao/ibatis/maps/BaseAttributeWrapper.xml.
--- The error occurred while applying a parameter map.
--- Check the BaseAttributeWrapper.findAttributeValuesMaxIdWithNullHash-InlineParameterMap.
--- Check the statement (query failed).
--- Cause: java.sql.SQLSyntaxErrorException: ORA-00904: "HASH_VALUE": invalid identifier
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryWithCallback(MappedStatement.java:201)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryForObject(MappedStatement.java:120)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:518)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:493)
at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForObject(SqlMapSessionImpl.java:106)
at org.springframework.orm.ibatis.SqlMapClientTemplate$1.doInSqlMapClient(SqlMapClientTemplate.java:273)
at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:209)
... 27 more
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "HASH_VALUE": invalid identifier
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at com.mchange.v2.c3p0.impl.NewProxyPreparedStatement.execute(NewProxyPreparedStatement.java:989)
at com.ibatis.sqlmap.engine.execution.SqlExecutor.executeQuery(SqlExecutor.java:185)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.sqlExecuteQuery(MappedStatement.java:221)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryWithCallback(MappedStatement.java:189)
... 33 more
Any thoughts/suggestions appreciated.
Gary Sharpe
UC DavisDid you import all the relevant sql scripts for your database? You have to import all the migrate/upgrade scripts as well. Once you have imported all the required sql scripts, it will start properly. You can ignore the cluster warnings.
Maybe you are looking for
-
I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.
-
Itunes won't open in windows 7
I can't get itunes to open on my hp computer using Windows 7 (64-bit) I have downloaded it and tried and it gives me the agreement screen and after I AGREE...nothing happens. I've uninstalled itunes and reinstalled. I attached the ipod thinking that
-
About to buy a personal domain, any tips
I'm new to this and about to purchase a personal domain. Do I just buy the name or must I get a hosting package with it (some offer emails, 2GB storage etc). I assume the my .mac is the host but just want to make sure. Any help appreciated. Tony
-
Image size changing upon saving.
I'm working on digital negatives for school and right before saving the image, it is 8.07M. But after saving the image and looking at the image info, it says 4.9M. Why is it saving my image to a smaller image?
-
HT5085 Is it possible to import Hong Kong iTunes Movie to Chinese iTunes?
Is it possible to import Hong Kong iTunes Movies to Chinese iTunes account?