Failed 10.5.4 installation

My 10.5.4 installation got stuck on "writing package receipt". About says I have 10.5.4 but I checked the booms folder and the com file isn't there. But I think 10.5.3 failed back when too (the com file is also missing). I want to download the combo file to update it but what should I do regarding 10.5.3?
Should I:
a) Download .3 combo file and install that and then download .4 and install it?
OR
b) Only download and install .4
Thanks!

Welcome to the Apple forums:
When the 10.5.3 failed, it was a warning that something was wrong. Never update a system that does not run perfectly.
That being said, if you download the huge combo 10.5.4 update which includes all previous updates, it might help.
Here's the link:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054comboupdate .html
Again, never go past a step that fails. Always fix things as they show up - they only get worse with time and eventually bite.

Similar Messages

Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)

Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)

Hi,
It’s version 13.1.1 It’s a trial version.
I am updating it from the Creative cloud desktop application.
I have the photography subscription with Lightroom and Photoshop with Creative Cloud.
I was interested in trying out the video software and have trials of Premiere Pro as well as others. The CC desktop app alerted me to the AF update just as it does for the others I subscribe to plus the ones I am using as trials. I have not had any problems with the other apps (trial or not), only with AF.
Thanks.
Nancy Chadwick

I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean

I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean

http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Photoshop CS6 update failed - errors encountered during installation U44M1P7

Photoshop CS6 update failed - errors encountered during installation U44M1P7up

Hi Creativegeek_route66,
Please follow the steps mentioned in the below article.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Thanks

Emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293

I am using win 10 home insider preview, build 10074. When I am trying to install VS 2015 community RC, selected Universal Windows App, it failed at
emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293
VS file version is 14.0.5596.25192

Hello EL_1980,
The error -2147023293 translated to Hex is:FFFFFFFF80070643
0x80070643 is a general error here so it is hard for us to troubleshoot. Please try download the ISO format of Visual Studio 2015 Community so that you can use the fciv.exe tool to verify the hash value. All info are listed on the VS2015 download page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2015-downloads-vs.aspx
Please click first "Visual Studio 2015" tap below image.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

I get this error when installing VS 2015 Community RC. I'm installing on Windows 10 build 10074. I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
I also get the other errors as well...
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Same issue here, on a Surface Pro 3.
I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
back at square one.
Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
Oh, and obviously - No, I did not cancel the install myself.
Here are some relevant lines from the install log,
[060C:0CF0][2015-04-30T14:20:08]i000: MUX: Source confirmed
[060C:1994][2015-04-30T14:20:14]i000: MUX: Finished connecting secondary installer pipe
[060C:14D4][2015-04-30T14:20:19]i000: MUX: Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
[060C:14D4][2015-04-30T14:20:25]i000: MUX: Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
[060C:044C][2015-04-30T14:28:13]i000: MUX: ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
[060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
[060C:044C][2015-04-30T14:28:48]i000: MUX: Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0 MaxSysDrive: 2063301632 AppDrive: 0 SysDrive: 2060471296
[060C:044C][2015-04-30T14:28:48]i000: MUX: ExecutePackageComplete for secondary installer
[060C:044C][2015-04-30T14:28:48]i000: MUX: Disconnecting secondary installer pipe
[060C:044C][2015-04-30T14:28:48]i000: MUX: Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
[060C:044C][2015-04-30T14:28:48]i000: MUX: Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
Action=Install, Package Id=VSSecondaryInstaller_box
[060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
[060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
Think I'll go buy a Mac...

Known Issue: Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Some users are receiving the following errors after Visual Studio setup completes
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
installation. Error code: -2147023294

We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
Update.
Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
Update.
An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
Thanks!
-Paul

After effects Error installing : Installation failed Errors encountered during installation.(34)

Hi guys i am having an issue with CreativeCloud.
I am on PC
Everytime i try to install After Effect trial on CreativeCloud it keeps saying this error message : "Installation failed Errors encountered during installation.(34)" and i've tried alot of times and always the same error message. I also tryed using CreativeCloud cleaner tool but that didnt help at all.
So if anyone can help please do it quickly and reply. ASAP !!!
Jayden.

http://forums.adobe.com/thread/1290880

Database assistand failed to launch during installation

Hello,
I have trouble getting oracle 9.2 installed on my Linux machine. The database assistand failes to launch during installation. This is the debug output:
/opt/oracle/product/9.2.0/bin/dbca: line 124: 12956 Segmentation fault $JRE_DIR/bin/jre -DORACLE_HOME=$OH -DJDBC_PROTOCOL=thin -mx64m -classpath $CLASSPATH oracle.sysman.assistants.dbca.Dbca $ARGUMENTS
furthermore cat /proc/sys/kernel/shmmax reports 2147483648
Can anyone tell me what to do, please?
Dieter

Not exactly your problem, but the solution might help.

Pse9 fails to install, windows installer error

I have just completed a clean re-install of Windows XP SP3 (plus subsequent updates). Trying to re--install PSE9 from the original disk fails with a Windows Installer error.
I have successfully re-installed all other software including, Norton IS 2012, Office 2007 sp3, Sage 50, HP printers x 2, adobe acrobat X, etc
All drivers were downloaded from the mobo's/HP website. Looked at min specs, but as pse9 installed fine on same machine prior to the re-install, don't think that can be the issue.
I tried installing on another XP SP3 PC which is not a clean re-install and it didn't show the error.
So auggestions?

When we tried subsequently, PSE9 installed as it should, we can only assume that pse9 wouldn't install initially due to HP laser printer drivers that had been installed that required a reboot, although at the time we weren't aware of that.
Thanks for your help guys......

App Server Fails to Start after Installation

Hi,
I've spent a whole day struggling with this, looking through forum discussions and trying out every single suggestion I've come across in the forums. I'm running out of ideas now and really appreciate any help I can get with this problem.
I'm trying to install SJSC2 (also tried with SJSC2u1 with the same outcome) on a new HP notebook (nw9440) running WinXP_sp2. I'm using the default installation done by HP.
My installation path is C:\Java\SunCreator2 (C:\Java\SunCreator2_1 for update 1).
After the installation the App server fails to start up and gives the below error in the server.log.
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d779c9d, pid=5368, tid=5760
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# V [jvm.dll+0x99c9d]
# An error report file with more information is saved as hs_err_pid5368.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Upon looking at the install.log in the rave_home directory, I noticed the below sequence of errors.
Timeout waiting for domain creator to go to starting state.
Compiler warnings:
line 44: Attribute 'debug-options' outside of element.
line 62: Attribute 'port' outside of element.
line 73: Attribute 'port' outside of element.
line 84: Attribute 'port' outside of element.
line 105: Attribute 'port' outside of element.
line 116: Attribute 'port' outside of element.
line 127: Attribute 'port' outside of element.
line 145: Attribute 'port' outside of element.
line 156: Attribute 'port' outside of element.
CLI156 Could not start the domain creator.
The following script has unexpected output: "C:\Creator2\bin\deploy-ws.bat"
Aug 14, 2006 11:27:33 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:35 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:37 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
The following script has unexpected output: "C:\Creator2\bin\deploy-ejbs.bat"
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
Aug 14, 2006 11:27:52 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:53 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:55 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:57 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
I've tried every workaround I've seen in the forums such as installing under different paths (both with spaces and without spaces), cleaning all the temporary files in the Temp directory, renaming the productregistry in the windows system directory. Each time I get the exact same error in the install.log.
I also tried installing the stand alone SUN App Server 8.1_02_2005Q2 as well as 8.2. I don't seem to have any issue with this installation or running of the stand alone server at all on the same machine.
Really appreciate any help I can get. TIA....
rgds,
KC

Hi,
After spending more time looking through the forum, I came across the below thread which has worked in my case (though it was suggested for Sol10x86).
http://forum.sun.com/jive/thread.jspa?threadID=62404&messageID=243113
This is the workaround that worked in my case.
> $ cd <Creator_Home>/SunAppServer8/lib
$ mv processLauncher.xml processLauncher.xml.trayIcon
$ cp processLauncher.xml.bak processLauncher.xml
# If you have a domains/creator/config/domain.xml
$ cd ../bin
$ ./asadmin start-domain creator
This started the app server. After that I was able to start and stop app server within the JSC as well.
Only difference between these two xml files seem to be,
processLauncher.xml.trayicon
<main_class classname="com.sun.rave.tray.RavePEMain"/>
processLauncher.xml
<main_class classname="com.sun.enterprise.server.PEMain"/>
Possibly pointing to a bug in the "com.sun.rave.tray.RavePEMain" class.
Thanks for your suggestions guys... and especially to Marco and Greg.
Rgds,
Kc
Message was edited by:
Kc

Solaris 10u6 fails to boot after installation on HP Proliant DL380 G4

Hello,
I have used Solaris 10u5 without issues on the HP DL380 G4. However, when I tried to install update 6 (new installation), it fails to reboot. I starts to boot, then aborts and reboots the system. I added the arguments -av to help get more information. Here's what I was able to capture:
Enter default directory for modules [platform/i86pc/kernel /kernel /usr/kernel]:
module /platform/i86pc/kernel/amd64/unix: text at [0xfffffffffb800000, 0xfffffffffb8d5f0f] data at 0xfffffffffbc00000
module misc/amd64/krtld: text at [0xfffffffffb8d5f10, 0xfffffffffb90a89f] data at 0xfffffffffbc74ce0
module /kernel/amd64/genunix: text at [0xfffffffffb90a8a0, 0xfffffffffbb04f4f] data at 0xfffffffffbc7ee00
Name of system file [etc/system]:
SunOS Release 5.10 Version Generic_137138-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
features: 14dffdf<cpuid,mwait,cx16,sse3,asysc,htt,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr,tsc,lgpg>
mem = 6225476K (0x17bf91000)
root nexus = i86pc
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
isa0 at root
psuedo-device ppm0
ppm0 is /pseudo/ppm@0
npe0 at root: space 0 offset 0
npe0 is /pci@0,0
pcie_pci0 is /pci@0,0/pci8086,3595@2
PCIE-device: pci8086,32a@0,2, pcie_pci3
pcie_pcie3 is /pci@0,0/pci8086,3595@2/pci8086,32a@0,2
NOTICE:
* This device is not bootable! *
* It is either offlined or detached or faulted. *
* Please try to boot from a different device. *
NOTICE:
spa_import_rootpool: error 22
panic[cpu0]/thread=fffffffffbc26ba0: cannot mount root path /pci@0,0/pci8086,3595@2/pci8086,32a@0/pcie11,4091@3/sd@0,0:a /pci@0,0/pci8086
,3595@2/pci8086,32a@0,2/pcie11,4091@3/sd@1,0:a
fffffffffbc49320 genunix:rootconf+114 ()
fffffffffbc49350 genunix:vfs_mountroot+61 ()
I have tried this on two identical machines with the same results. Some other details:
- Booting into failsafe mode works; the system finds and mounts the zfs volumes
- I did a network installation. I rebuilt the miniroot to include the CPQary3 package
- I tried installing with a zpool with two disks as well as only one disk; the result was the same
- I also tried installing without using a ZFS root disk; it also fails
I have googled for this problem but have not found anything like it. I would greatly appreciate any help!
Thanks,
Michael

I finally figured it out. For some reason, the installer does not install the driver package (CPQary3) or include it in the boot archive. The driver is in the fail-safe miniroot, however. So, I booted into fail-safe mode and installed the driver, and now everything works!
I ran into two problems with the installer on this hardware. I'll post details and work-arounds for both in a separate message.

Arch fails to boot after installation (BIOS mode)

I finished my Arch installation, following the Beginner's Guide, and once I unmounted the partitions and rebooted, GRUB failed to boot into Arch. I'm not exactly sure what the problem is though. Basically what happens is I power on the machine, the Dell splash screen comes up, GRUB loads, I choose
Arch Linux, with Linux core repo kernel
the kernel and ramdisk attempt to load, then some message about "recovering journal" appears, and then I return back to the Dell splash screen. The same thing happens even if I choose the second option
Arch Linux, with Linux core repo kernel (Fallback initramfs)
However, when I choose to boot Win XP everything boots just fine. My apologies for the quality of the videos and pictures.
Here's a video of what happens:
http://youtu.be/uC96kX6iTjI
I suspect this has to do with this error I got when I generated the "grub.cfg". Although I'm not entirely sure because my understanding is that this error would affect booting Win XP which in fact boots perfectly fine.
Error (and no I'm not using any lvm volumes)
http://imgur.com/qqxpoGG
I believe these are the portions of the "grub.cfg" that load Arch and Win XP. I got these by pressing "e" while on their menu entry in the GRUB bootloader.
Arch (I had to scroll down to see the rest, hence two pictures)
http://imgur.com/79dBw2C
http://imgur.com/qusEfL0
Win XP
http://imgur.com/oLnLlT0
Any idea how I can fix this? Any help is greatly appreciated and please be patient, I know, I'm a noob.
* I'm not sure if this is of any significance but I had a problem very similar to this when trying to get the Arch install to boot via usb (this computer doesn't have CD/DVD drive). I solved it by following this excerpt from the Beginner's Guide.
Troubleshooting boot problems
If you are using an Intel video chipset and the screen goes blank during the boot process, the problem is likely an issue with Kernel Mode Setting. A possible workaround may be achieved by rebooting and pressing
e
over the entry that you are trying to boot (i686 or x86_64). At the end of the string type
nomodeset
and press
Enter
Here's a video of what it looked like:
http://youtu.be/vXRcbU0zdto
The computer specs:
OS: Windows XP Professional 32 bit Version 2002 Service Pack 3
CPU: Intel Pentium 4 @ 3.00 GHz
RAM: 2 GB DDR2
HDD: 80 GB

Hi,
why did you not try adding nomodeset with the regular boot? During the net-install no video drivers will be installed;
you have to install them after reboot after installing xorg. The (video)problem you had with booting from usb is still
present.

Error in Creating the Oracle Fail Safe Group during installation on MSCS

Hi All,
I am installing ECC 6 dual stack on MSCS.
I have done steps till CI installation as per installation guide.
I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
"Error occurred while working with configuration(scanning)
MSG:Error while connecting to the database"
I think it is not accepting the virtual hostname.
In our scenario CI is running CI node and DB instance is running on DB node.
I have followed the steps as per the installation guide.
Please let me know how to resolve this issue.
Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
Regards,
Dinakar
Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

Hi,
Thanks for your reply.
1) did you stop the CI before making the modifications as stated in the installation guide?
     Yes
2) is your database currently running on the same physical cluster node as your CI?
    No.Database instance is running on DB node and CI is on CI node.
3) is your database online?
     Yes,it is up and running
Please let me know if there is anyway to resolve this issue.
Regards,
Dinakar

Root.sh failed during RAC11.2g installation

Dears,
I'm trying to install RAC 11.2 (Grid Infrastructure version is 11.2.0.1) on two linux nodes (OS version is Oracle Linux 5.11 2.6.39-400.215.10.el5uek)
SELinux + Firewall are stopped, ASM works fine (listdisks and querydisk shows my disks correctly), ping between both nodes on public and private IPs is OK, hosts file configured well.
ASM owner is user grid, and this user is the same used while installation of grid infrastructure.
# /sbin/modinfo oracleasm
filename:       /lib/modules/2.6.39-400.215.10.el5uek/kernel/drivers/block/oracleasm/oracleasm.ko
description:    Kernel driver backing the Generic Linux ASM Library.
author:         Joel Becker <[email protected]>
version:        2.0.8
license:        GPL
srcversion:     28484D2A43A6D981AAB9246
depends:
vermagic:       2.6.39-400.215.10.el5uek SMP mod_unload modversions
parm:           use_logical_block_size:Prefer logical block size over physical (Y=logical, N=physical [default]) (bool)
Installation was fine, without any errors or warnings until executing root.sh, the result was:
# /opt/app/grid/product/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME= /opt/app/grid/product/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2015-04-20 17:06:03: Parsing the host name
2015-04-20 17:06:03: Checking for super user privileges
2015-04-20 17:06:03: User has super user privileges
Using configuration parameter file: /opt/app/grid/product/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
acfsroot: ACFS-9302: No installation files found at /opt/app/grid/product/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5uek-x86_64/bin.
CRS-2672: Attempting to start 'ora.gipcd' on 'node01'
CRS-2672: Attempting to start 'ora.mdnsd' on 'node01'
CRS-2676: Start of 'ora.gipcd' on 'node01' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'node01'
CRS-2676: Start of 'ora.gpnpd' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node01'
CRS-2676: Start of 'ora.cssdmonitor' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'node01'
CRS-2672: Attempting to start 'ora.diskmon' on 'node01'
CRS-2676: Start of 'ora.diskmon' on 'node01' succeeded
CRS-2676: Start of 'ora.cssd' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'node01'
CRS-2676: Start of 'ora.ctssd' on 'node01' succeeded
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15130: diskgroup "DATA" is being dismounted
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/app/grid/product/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2673: Attempting to stop 'ora.asm' on 'node01'
CRS-2677: Stop of 'ora.asm' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'node01'
CRS-2677: Stop of 'ora.ctssd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'node01'
CRS-2677: Stop of 'ora.cssdmonitor' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'node01'
CRS-2677: Stop of 'ora.cssd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'node01'
CRS-2677: Stop of 'ora.gpnpd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'node01'
CRS-2677: Stop of 'ora.gipcd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'node01'
CRS-2677: Stop of 'ora.mdnsd' on 'node01' succeeded
Initial cluster configuration failed. See /opt/app/grid/product/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_node01.log for details
On rootcrs_node01.log file I found:
2015-04-20 17:06:20: Removing "/etc/rc.d/rc3.d/S96ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc3.d/S96ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc5.d/S96ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc5.d/S96ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc0.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc0.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc1.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc1.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc2.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc2.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc4.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc4.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc6.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc6.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file:
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: The file ohasd has been successfully linked to the RC directories
What did I missed ?
Kindly advice ...
Best regards

Thanks dear,
Problem solved by performing two things:
1st: I followed the link you advice and set:
ORACLEASM_SCANORDER="sdb"
ORACLEASM_SCANEXCLUDE="sda sr"
Where my disks are:
[root@node01 ~]# fdisk -l
Disk /dev/sda: 300.0 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 262144 bytes
Disk identifier: 0x0005aeac
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1       34421   276480000   83 Linux
/dev/sda2           34421       36461    16384000   82 Linux swap / Solaris
Disk /dev/sdb: 1998.4 GB, 1998375747584 bytes
255 heads, 63 sectors/track, 242955 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1      127483 1024007166   83 Linux
/dev/sdb2          127484      242955   927528840   83 Linux
2nd: We found a hardware problem in connection between network storage and the switch (the type of fiber cable wasn't correct, solved by using single-mode cable instead of multi-mode cable)
Both actions make this log (oracleasm-read-label: Unable to open device "/dev/sda1": No such file or directory) disappear.
Thanks for help and best regards,

ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3

I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi

Hi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Failed 10.5.4 installation

Similar Messages

Maybe you are looking for