Failed -2125

Hello all,
I'm trying to export a high quality H264 file using Quicktime Pro conversion. Its a dvcpro HD 1080 file of appprox 38 min. My mac, after hours of encoding (the time is expected) crashes, and asks me to restart. After repairing permissions, tried again, and this error appeared. Quicktime version is 7.1.5.
Will try install 7.2. but would like to hear any suggestions to solve the problem...
Encoding the file with these settings:
Mpeg 4
H264
18000KB
Multiple encodes
AAC AUDIO 128
Optimized for Download
No Streaming

Much appreciated your quick reaction QuickTimeKirk.
if there is another way to produce a fine DVD after using iMovie to create a video project please let us know!
We make a lot of video footage around Australia from now on and we are looking for a method to produce from every journey a DVD which we (and our friends and relatives) can watch via TV.
The camcorder we use is: Sony Handycam Super Steady Shot HDR-SR11 1920x1080i HD recording
Have a look at our private website: http://web.me.com/gertdewilde/ReflectionsofAustralia/Welcome.html
To answer your question:
We started with an iMovie project.
In step 1 we selected the full 1920x1080 size
Format: Integer (Little Endian)
Sample rate: 48.000 kHz (Recommended)
Sample size: 16-bit
Channels: Stereo (L R)
In step 2 we selected the Block match threshold: 300, Gamma 2.22
In step 3 we chose "Movie to MPEG-4", Video format H.264 Data Rate:16200, Image Size 1920x1080 HD,
Under H.264 Video Options we chose Restrict Profile(s) to Main en Encoding Mode to Faster encode (single-pass)
In the streaming tab we turned off "Enable streaming"
I hope this the info you want to give us a helping hand!
with Light
Gert de Wilde

Similar Messages

  • AAA Authorization Fail between WLC 2125 & LWAP 1042n

    In my Wireless environment, WLC 2125 is connected to a LWAP 1042n. The WLC is succesfully providing DHCP IP to the AP but is unable to discover it. All are connected. During debug mode following error message is encountered in WLC 2125, "AAA Authorization Fail....".
    Please suggest what to do.

    Here is a good doc that explains different errors:
    http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

  • In QuickTime Pro (v7.6.2) Error message:  Failed: qtKitErrorCatchAll(-2125)

    G'day everyone,
    I made a video project in iMovie '09. My intention is to burn this video at the end on a DVD to watch it via a wide screen TV.
    What did I do? (reference to: David Glover "Creating higher -quality HD video with iMovie '09")
    1. I exported the video, using QuickTime, to the "Apple Intermediate Codec" at the full 1920x1080 size.
    Therefore I chose "Export using QuickTime" in the Share menu of iMovie. etc. etc.
    2. Than I had to deinterlace the video with the JES Deinterlacer.
    3. The last step to perform was to compress and scale the video with QuickTime Pro.
    During this last step I got (after about three hours! and having done already about 80% of the process) the message: Failed: qtKitErrorCatchAll(-2125)
    Needless to write perhaps, very frustrating, because it took 2h15' for step 1, 1h10' for step 2 and step 3 about three hours and than having the message as mentioned above!
    Very much appreciated if someone can help me out!
    with Light
    Gert de Wilde
    [email protected]

    Much appreciated your quick reaction QuickTimeKirk.
    if there is another way to produce a fine DVD after using iMovie to create a video project please let us know!
    We make a lot of video footage around Australia from now on and we are looking for a method to produce from every journey a DVD which we (and our friends and relatives) can watch via TV.
    The camcorder we use is: Sony Handycam Super Steady Shot HDR-SR11 1920x1080i HD recording
    Have a look at our private website: http://web.me.com/gertdewilde/ReflectionsofAustralia/Welcome.html
    To answer your question:
    We started with an iMovie project.
    In step 1 we selected the full 1920x1080 size
    Format: Integer (Little Endian)
    Sample rate: 48.000 kHz (Recommended)
    Sample size: 16-bit
    Channels: Stereo (L R)
    In step 2 we selected the Block match threshold: 300, Gamma 2.22
    In step 3 we chose "Movie to MPEG-4", Video format H.264 Data Rate:16200, Image Size 1920x1080 HD,
    Under H.264 Video Options we chose Restrict Profile(s) to Main en Encoding Mode to Faster encode (single-pass)
    In the streaming tab we turned off "Enable streaming"
    I hope this the info you want to give us a helping hand!
    with Light
    Gert de Wilde

  • What does error -2125 mean when movie exporting fails?

    I have a problem exporting a 4-hour movie (720p DV video) that has been acquired and exported by EyeTV 2.3.2 as an iMovie 9 project and assembled in said project.  Some 10-14 hours later after starting a movie export in iMovie for Apple (HD) TV resolution, iMovie displays the dialogue: "Unable to prepare project for publishing—the project could not be prepared for publishing because an error occurred. (-2125)".
    What is causing this error and how can I resolve it?  The project is about 87 GB large as exported by EyeTV and I have about 194 GB free space on my work volume (which is not the system startup volume) that holds the iMovie project.
    Being such a generic error, it is apparently a problem that isn't expected or popular.  Any clues about this error would be muchly appreciated.  I'll work on it some more, but I'm getting nowhere fast!
    I'll write some more tech details about the system experiencing the problem a little later, but off the top of my head, it's iMovie 9.0.4 on a MacBook Pro (Core Duo) w/ 2 GB of memory and Mac OS X 10.6.7. Running Activity Monitor shows nothing abnormal to disks or CPU usage during the export, and there is no resource exhaustion for the entire time exporting is in progress.
    Thanks!
    --tonza

    Hi
    There are two kinds of sizes - one must keep in mind
    • Gbs - when regarding to store video material on hard disks - then how hd is formatted as UNIX/DOS/FAT32/Mac OS Exchange - Doesn't work due to the 4Gb limit - HAS TO BE Mac OS Extended (HFS)
    • DURATION - Movie time + MENU time - an d this is Vital in regard to iDVD - as Gbs Mbs etc. doesn't matter at all. I've 500Mb movies that do not fit and 50Gbs that fit nicely.
    Culprit here is most often the menu that can hide duration in many places one of them picture buttons - as they get same time/duration as movie dropped into them even if only one frame is showed and no animation. Other things is Menu audio that also can consume large Duration times.
    So - as I wrote in another answer.
    OK Error code - 2125 usually indicates that the movie is to large (in TIME - Duration).
    It use to pop up when going to iDVD !
    iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
    iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choise of
    menu and animation of this can take lost of "DURATION" 15 minutes or even more.
    Choise of encoding method and use of SL or DL DVDs determine the DVD limit.
    iDVD 08 & 09 & 11 has three levels of qualities.
    iDVD 6 has the two last ones
    • Professional Quality (movies + menus up to 120 min.) - BEST
    • Best Performances (movies + menus less than 60 min.) - High quality on final DVD
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
    DL DVDs can store about double of these times.
    ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
    less than 25Gb (my minimum)
    So - You have added together all things except use of strange file formats to make this as hard as possibly
    • 4 hours of material - DL-DVD is about 3:45 with as simple menu possibly - no photos, no audio or no animation - STILL TO MUCH
    • I have about 194 GB free space on my work volume (which is not the system startup volume) that holds the iMovie project. - YES BUT - Neither iDVD or Mac OS can use this space for it's temp. files - Space has to be on the Start-up hard disk - about 25Gb free space when using SD-video and about 4-5 times more when using HD-video. This can not be addressed to other hard disks.
    • iMovie 9.0.4 - Well in regard to quality this is not good. As iDVD is SD interlaced video. So using iMovie up to HD6 or FinalCut will result in much better result as they don't discard every second line on Export to iDVD.
    • In iMovie'09 - Don't Share to iDVD - BUT - Share to Media Browser and as Large (not HD) - helps a bit
    Yours Bengt W

  • Authentication failed using EAP-TLS and CSSC against ACS

    Hi.
    Playing with a trial version of CSSC (Cisco secure services client) I had a problem that really I don´t understand.
    Any 802.1x configuration work fine but when I use anything involving the use of certificates (EAP-TLS or PEAP using a certificate instead a password to autenticate) I always see the same log message in ACS:
    "Authen session timed out: Challenge not provided by client" It seems that my client supplicant does not repond to the ACS when the first one proposed an EAP method.
    First I discart a certificate error because the same certificate works fine with Intel Proset Wireless supplicant and Windows Zero Configuration. EAP Fast works fine using auto provisioning or manual provisioning.
    Any idea? I red the CSSC administration guide but I did not find anything that explains this behaviour or defines the right configuration for this EAP method.
    I´m using Windows XP SP3, Intel Wireless 4965AGN and CSSC 5.1.1.18; My CA is a Windows CA.ACS version 4.2
    Thanks in advanced.
    Best regards.

    Today is not mmy day.
    It´s still failing and maybe I will open a TAC case.
    I´m looking at the log file of the CSSC and I don´t like what I have seen.
    2125: portable-9b7161: oct 28 2010 20:34:29.156 -0100: %CSSC-6-INFO_MSG: %[tid=344][mac=1,6,00:1d:e0:9f:05:ef]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: EAP suggested by server: leap
    2126: portable-9b7161: oct 28 2010 20:34:29.156 -0100: %CSSC-6-INFO_MSG: %[tid=2044][mac=1,6,00:1d:e0:9f:05:ef]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: EAP requested by client:  eapTls
    2127: portable-9b7161: oct 28 2010 20:34:29.156 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: EAP methods sent : sync=8
    2128: portable-9b7161: oct 28 2010 20:34:29.156 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: Credential Request completed, response sent : sync=8
    2129: portable-9b7161: oct 28 2010 20:34:29.156 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: Authentication state transition: AUTH_STATE_UNPROTECTED_IDENTITY_SENT_FOR_FULL_AUTHENTICATION -> AUTH_STATE_UNPROTECTED_IDENTITY_ACCEPTED
    2130: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=344]: Credential callback, type=AC_CRED_SERVER_VERIFY, sync=9
    2131: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=344]: Calling acCredDeferred
    2132: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=344]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: Credential Request deferred : sync=9
    2133: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: Server verification sent : sync=9
    2134: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: Credential Request completed, response sent : sync=9
    2135: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=344]: Credential callback, type=AC_CRED_USER_CERT, sync=10
    2136: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=344]: Calling acCredDeferred
    2137: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=344]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: Credential Request deferred : sync=10
    2138: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: Impersonating user
    2139: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: Loading client certificate private key...
    2140: portable-9b7161: oct 28 2010 20:34:29.171 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: Calling acCertLoadPrivateKey()...
    2141: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: ...acCertLoadPrivateKey() returned
    2142: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-3-ERROR_MSG: %[tid=140]: Internal error 204, contact software manufacturer
    2143: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: acCertLoadPrivateKey() error -20 [c:\acebuild\bldrobot_cssc_5.1.1.21_view\monadnock\src\ace\certificate\certificateimpl.cpp:239]
    2144: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-3-ERROR_MSG: %[tid=140]: Internal error 4, contact software manufacturer
    2145: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: CssException for function 'acCertLoadPrivateKey' => -20{error} [certificateimpl.cpp:240]
    2146: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-3-ERROR_MSG: %[tid=140]: Internal error 7, contact software manufacturer
    2147: portable-9b7161: oct 28 2010 20:34:29.187 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: Assertion 'CSS exception - should this be logged instead?' failed at [cssexception.cpp:114]
    2148: portable-9b7161: oct 28 2010 20:34:29.218 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: Client certificate private key has not been loaded
    2149: portable-9b7161: oct 28 2010 20:34:29.218 -0100: %CSSC-7-DEBUG_MSG: %[tid=140]: Deimpersonating user
    2150: portable-9b7161: oct 28 2010 20:34:29.218 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: Client certificate 239f43fdcde8e190540fab2416253c5660c0d959 has been processed: ERR_INTERNAL_ERROR(7)
    2151: portable-9b7161: oct 28 2010 20:34:29.218 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: Certificate 239f43fdcde8e190540fab2416253c5660c0d959 is unusable
    2152: portable-9b7161: oct 28 2010 20:34:29.218 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: {764C6E35-2FFF-47CF-A0CA-5B90E9483367}: Credential Request completed, no response sent : sync=10
    2153: portable-9b7161: oct 28 2010 20:34:30.078 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: Checking for new configuration
    2154: portable-9b7161: oct 28 2010 20:34:32.078 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: Checking for new configuration
    2155: portable-9b7161: oct 28 2010 20:34:34.078 -0100: %CSSC-7-DEBUG_MSG: %[tid=2044]: Checking for new configuration
    It seems that It found a valid certificate, starts the Authentication proccess and when it must request the ACS challenge it fails when loading the private key and crash the supplicant 
    Do you think the same??
    Thanks.
    Best Regards.

  • IMovie Export using Quicktime in 1080p gives error OSStatus error -2125

    Hi, I am new to using iMovie, started using it few days back.  So far i have been unable to "Export using Quicktime" in 1920*1080p option.
    I was able to export using "Export to Quicktime" in 640*480p (.mp4 format) option and was able to use "Export Movie" with 1920*1080p (.mov format) option.
    Trying to export using "Export using Quicktime" in 1080p always failed so far.  I tried at least a dozen times with different settings.  Initially i was getting the following two errors randomly, but later, the last 4-5 trials i keep getting only the first error.
    1. OSStatus error - 2125
    2. Not enough room in the heap zone.
    Project details are - it is a 34 min. video and size came to 5.3GB when exported using "Export Movie" (.mov format) using 1080p option. 
    It indicates 2 hours to export it, takes 2 hours and interestingly, the OSStats error - 2125 error happens at the end of the export. I can see in the finder the increasing size of the file the process is creating.  It has been a really frustrating experience with iMovie so far.  I even tried duplicating the project with a different name and tried export, did not help.
    I have >300GB of free space on my hard drive and 8 GB of RAM.  I don't have any heavy applications running on the system. 
    I read forums about this error and tried the following so far with no help.
    1. Tried changing names of the iMovie project few times to see if that helps. 
    2. Set the sleep settings of the computer as well as monitor to Never.
    3. Reached out to apple support about it and they suggested me to setthe sleep settings to never and then try.  But that did not help.
    I am stuck with this error OSStatus error - 2125. 
    The settings I am trying with are:
    Export to MPEG-4
    H.264 video format
    20Mbps bit rate
    30 fps
    One question is, once I exported a project in one format or setting, do I have to create a new project to export it in different settings or I can just use the same project?
    Can someone please help?  Any help about this is greatly appreciated.   Thank you.

    I am having the same issue. Have been searchin gfor 3 days for an answer. I am able to export as MOV file, but not MP4. I bought QT Pro 7 to convert THE MOV to MP4 and it doesnt work either. I then bought iskysoft Video Converter and it wont convert the MOV to MP4 either. (will convert smaller files)
    I have 700 GB of free space on drive. I have tried a movie that is 3 hours, one that is one hour, and one that is 54 minutes..All same thing.. Error -2125. Although it will work with smaller movies under 30 mins.
    Surely there has to be an answer to this? It seems it has been an ongoing issue for quite some time, yet there is no solution.

  • Failing to deploy to external OC4J 11g standalone

    Trying to deploy to external 11g TP4 OC4J standalone is giving following error...
    any ideas?
    thanks in advance..
    -Dhananjay
    Operation failed with error:
    oracle.oc4j.admin.jmx.shared.exceptions.InternalException: java.lang.InstantiationException: Application: PkgConfig is in failed state as initialization failed
         at oracle.oc4j.admin.jmx.shared.deploy.NotificationUserData.<init>(NotificationUserData.java:107)
         at oracle.oc4j.admin.internal.Notifier.reportError(Notifier.java:430)
         at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:133)
         at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
         at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:82)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: oracle.oc4j.admin.internal.DeployerException: java.lang.InstantiationException: Application: PkgConfig is in failed state as initialization failed
         at oracle.oc4j.admin.internal.ApplicationDeployer.addApplication(ApplicationDeployer.java:557)
         at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:210)
         at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:99)
         ... 5 more
    Caused by: java.lang.InstantiationException: Application: PkgConfig is in failed state as initialization failed
         at com.evermind.server.Application.setConfig(Application.java:636)
         at com.evermind.server.Application.setConfig(Application.java:433)
         at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:2125)
         at oracle.oc4j.admin.internal.ApplicationDeployer.addApplication(ApplicationDeployer.java:554)
         ... 7 more
    Caused by: java.lang.InstantiationException: Import was not resolved for PkgConfig.root:0.0.0: shared library "adf.oracle.domain" could not be found.
         at com.evermind.server.ApplicationStateRunning.initClassLoader(ApplicationStateRunning.java:1374)
         at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:179)
         at com.evermind.server.Application.setConfig(Application.java:538)
         ... 10 more
    Caused by: oracle.oc4j.loader.config.ConfigurationException: Import was not resolved for PkgConfig.root:0.0.0: shared library "adf.oracle.domain" could not be found.
         at oracle.oc4j.loader.config.ClassLoaderFactory.handleSharedLibraryNotFound(ClassLoaderFactory.java:706)
         at oracle.oc4j.loader.config.ClassLoaderFactory.getSharedLibraryToImport(ClassLoaderFactory.java:651)
         at oracle.oc4j.loader.config.ClassLoaderFactory.getImportedSharedLibraries(ClassLoaderFactory.java:529)
         at oracle.oc4j.loader.config.ClassLoaderFactory.addImportedSharedLibraries(ClassLoaderFactory.java:486)
         at oracle.oc4j.loader.config.ClassLoaderFactory.createApplicationLoader(ClassLoaderFactory.java:458)
         at com.evermind.server.ApplicationStateRunning.createClassLoader(ApplicationStateRunning.java:1353)
         at com.evermind.server.ApplicationStateRunning.initClassLoader(ApplicationStateRunning.java:1362)
         ... 12 more
    #### Deployment incomplete. #### Jul 21, 2008 12:15:31 PM
    Deployment Failed

    I overcame this problem by analyzing the embedded oc4j's server.xml and adding to the standalone's server.xml all missing libraries, of course, i had copy all nedded jars as well
    after solving that, i had an OutOfMemory error, which i solved by setting the environment variable OC4J_JVM_ARGS with "-XX:PermSize=256m -XX:MaxPermSize=512m"
    and so far, so good

  • Bit locker drive encryption failed due to power failer and hard disk corrupted

    I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
    It showed like this in My computer
    I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
    and my pc got hang  no other option rather than to press the restart button. 
    then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
    I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
    I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

    Hi,
    The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
    Bitlocker-repair (repair-bde)  tool
    can't repair a drive that failed during the encryption or decryption process.
    In addition, could you please explain a bit for what drive you are trying to deal with? external one?
    When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
    Regarding your scenario, please take a look to see if the following articles could help here:
    Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
    Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
    Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
    Best regards
    Michael Shao
    TechNet Community Support

  • Cannot send email from my Touch (connection to smtp server fails)

    Hello,
    I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
    I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
    If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
    The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
    Does anyone know why this would happen?
    Thanks,
    Marcelo

    Thank you very much for your responses
    1) the link to mail setup is (sorry, it's quite long)
    http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
    2) I am indeed using SSL, as instructed by IT
    3) I do use port 587 instead of 25 (25 does not work either)
    Any ideas? Thanks again.
    MC

  • BSI ConnectToDataSet...failed

    Hi
    We have a problem with the BSI, we had been getting a dump "RFC_ERROR_SYSTEM_FAILURE", I followed the SAP Note 1068271 for the debug, and the result is:
    =Thu Jan 22 11:53:37 2009
    =SAP AG, Walldorf - Business API for BSI TaxFactory 8.0
    =RfcAccept called
    =Mapping ABAP RFC_PAYROLL_TAX_CALC_US_80 to C function srv_Payroll_Tax_Calc_US_80
    =Mapping ABAP RFC_HR_TAXLOCATOR_US_80 to C function srv_hr_taxlocator_us_80
    =Waiting for ABAP function calls
    =Running function srv_Payroll_Tax_Calc_US_80
    =Loading import parameters
    =Loading export parameters
    =Loading internal tables
    =Calling Payroll_Tax_Calc_US
    =Running Connect_DB_Payroll_Tax_Calc_US
    BSI dataset                  -> 110
    ConnectToDataSource...Succeeded 
    ConnectToDataSet...failed 
    Error String ->  7777 - [Oracle][ODBC][Ora]ORA-00933: SQL command not properly ended
    =RFC error
    operation/code Connect_DB_Payroll_Tax_Calc_US
    key RFC_ERROR_SYSTEM_FAILURE
    status
    message See RFC trace file or SAP system log for more details
    internal status
    The RFC under sm59 is working fine, the error is on the connection to the Dataset according to the Debug log "ConnectToDataSet...failed".
    I don't know what to check about the Dataset, could you please help me?
    Best Regards

    Yes, it's correct.
    I checked it's 8.0.
    I think is a problem with the parameters under tf80server.bat.
    SET
    TF80_CONNECT_STRING=DSN=;UID=;PW
    D=;
    SET TF80_SCHEMA_NAME=.TF80
    REM for SAP trace debugging, uncomment below & see file
    errors.txt in gateway working directory
    REM C:\BSI\TAXFACTORY\tf80serverdebug.exe %*
    REM else for usual operation
    C:\BSI\TAXFACTORY\tf80server.exe %*
    I don't know what is the "ODBC_DSN_NAME"
    I have the user, password, the database name...
    Best Regards

  • Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

    Hello Experts,
    we did some changes in the previosly uploded version of IPC AP 7.0  customer user exit Jar file in eclipse.
    While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
    when we checked the logs in SM 53 we seen the below mentioned error:
    Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
    caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
    --> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
    caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
    at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
    at 
    if  required i can post the complete stack trace.
    any inputs/suggestions are most welcome.
    Thanks & regards,
    Siddharth

    Hi Mark,
    Yesterday after Posting the thread we found the same Note ,Issue occured because of  JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
    Thanks for your Help also.
    Regards,
    Siddharth

  • Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

    Hi
    During an upgrade from 4.7  to ERP6  I get the following error
    message in phase STARTSAP_NBAS:
    SYSTEM START failed, code -2
    -2: the test rfc did not work.
    Try to log on to the system with user DDIC
    When I try to log on to the system as user DDIC, I get the following
    error message:
    DB-Error -0
    SAP* can log in .The password I submit is correct. I have not changed this password at
    any time.
    Any ideas are most welcome

    Hi,
    DB-Error -0 indicate problem with kernel, try to upgrade kernel.
    check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
    regards,
    kaushal

  • Running workbook from .bat fails to start application missing CORE40 dll

    I have been running several workbook via windows task scheduler / vbscript &/or bat files.
    I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
    If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
    If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
    DIS4USR.EXE – Unable To Locate Component
    “this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
    The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
    Please help! URGENT :)
    Thanks!

    Hello
    Check the PATH environment variables for the machine you are on and the one you are connecting to.
    You might not have Discoverer's objects in the PATH.
    Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
    Best wishes
    Michael

  • Due to my laptop screen failing i have to return to facory settings, can i reinstall adobe reader and adobe air afterwards?

    Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?

    I don't see why not. Do you foresee a special difficulty?

  • Downloads to documents folder fail due to parallel upload

    Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
    This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
    thanks,
    Heiko

    Hi Heiko,
    Let me explain again:
    You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
    The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
    Best Regards,
    Ashwani Kr Sharma

Maybe you are looking for