Failed ABAP process in process chain does not trigger subsequent process
Hello,
I have a issue in my process chain with the abap process type.
When this abap process gets failed due to some reason; it is not trigerring subsequent step in the chain.
Any ideas on how it can be solved or any work-around?
I searched the forum and got to know that we can create a copy of abap process type, and can change possible events to
"success or fail".
Please let me know your views on it or if someone has ever encountered similar issue.
Thanks alot for your help,
Anuj
Hi Anuj,
My guess is that you have your the link between the ABAP process type and the subsequent step to trigger on success. You can check this, Go to RSPC -> process chain and check the design. If the link has a green light on it, then it will trigger only on success of the abap process. You need to check with your design and confirm whether this need to be like this, (maybe the abap process is doing something which is required for the subsequent loads??)
If no then you can change the link type to either success of failure and activate the chain. This would resolve your problem.
If you cant change your chain, then i would suggest you correct the failure and then use the program RSPC_PROCESS_FINISH to push the chain further. Just search for this on the forums, there are plenty of blogs/threads on this.
Regards.
Similar Messages
-
How to Notify if Process Chain DOES NOT complete?
How do I use Process Chains to notify me if the end process of a chain DOES NOT run by a certain time? Example: Chain starts at 6PM every night, always finishes by 7:30. If it doesn't complete by 8:00, I want to be notified. I can spawn an event on completion of the chain, but the 8PM job has to notify me ONLY IF this event is not active. How to do that?
Well you can make the ABAP process type send message
RSPC>from main menu Settings>Maintain process types
change mode -->select process type "ABAP" and change "possible events" to "Process ends successful or Incorrect" save it.
come out of process chain and goto the process chain maintenance again.
In regards to your question of 18 steps ,as i said you only need this ABAP process type once at the END of the Process chain to SET the flag status = X.
Another Process chain runs at 8.00 with only one process type ABAP process type to check the status in table if empty or X and send message accordingly,
Fyip - table RSPROCESSLOG and FM - RSPC_PROCESS_FINISH also available at your disposal to get some leads.
You can wait until some one has better solution and implemented it before,i just put my thoughts in to it,its not imperative for you.
I leave the thoughts with you.
Hope it Helps
Chetan
@CP.. -
[bumblebee] Failed to load module "nouveau" (module does not exist, 0)
Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages -
Connect failed because target host or object does not exist
Hello,
I've installed XE 10.2 under Fedora Core 7 from the downloaded .rpm. The RPM installs fine, and I've run the config from the command line. I've edited my bash file to load the environment variables. Here's my hosts file:
xxx.xxx.xxx.xxx hostname hostname.domain
127.0.0.1 localhost.localdomain localhost
When I start the oracle-xe service from the services interface, I get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-JUL-2007 14:49:01
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX.XXXX)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
with the HOST name filled in. None of the messages I've searched though on this forum relate to this error. Any help would be greatly appreciated.
-B
ps. I'm running this on my local machine.Thanks! that got most of my listener up and running. I now get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 24-JUL-2007 09:01:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 24-JUL-2007 09:01:31
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
I performed a quick search on the forum and then tried this:
SQL> connect / as sysdba
Connected.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01507: database not mounted
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
I checked the log file and it shows this:
Fri Jul 20 11:14:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:17 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5332
Fri Jul 20 11:14:18 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:18 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5334.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5334
Fri Jul 20 11:14:19 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:19 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5341.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5341
Fri Jul 20 11:14:20 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:20 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5360.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5360
Fri Jul 20 13:47:47 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:47:47 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7963.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7963
Fri Jul 20 13:48:41 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:48:41 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8332
Fri Jul 20 13:49:32 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:49:32 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8671.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8671
Fri Jul 20 13:50:51 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:50:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8708.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8708
Fri Jul 20 14:15:44 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:15:44 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9214.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9214
Fri Jul 20 14:27:16 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:27:16 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9688.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9688
Fri Jul 20 14:32:26 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:32:26 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9828.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9828
Fri Jul 20 14:40:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
MMAN started with pid=4, OS id=2232
PSP0 started with pid=3, OS id=2230
PMON started with pid=2, OS id=2228
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Fri Jul 20 14:40:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Fri Jul 20 14:40:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Jul 20 14:40:42 2007
ALTER DATABASE MOUNT
Fri Jul 20 14:40:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Jul 20 14:40:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:23:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2228
PSP0 started with pid=3, OS id=2230
MMAN started with pid=4, OS id=2232
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Mon Jul 23 08:23:19 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Mon Jul 23 08:23:19 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 08:23:20 2007
ALTER DATABASE MOUNT
Mon Jul 23 08:23:20 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 08:23:23 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:28:52 2007
Starting ORACLE instance (normal)
Mon Jul 23 14:22:36 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2226
PSP0 started with pid=3, OS id=2228
MMAN started with pid=4, OS id=2230
DBW0 started with pid=5, OS id=2232
LGWR started with pid=6, OS id=2234
CKPT started with pid=7, OS id=2236
SMON started with pid=8, OS id=2238
RECO started with pid=9, OS id=2240
CJQ0 started with pid=10, OS id=2242
MMON started with pid=11, OS id=2244
Mon Jul 23 14:22:38 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2246
Mon Jul 23 14:22:38 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 14:22:39 2007
ALTER DATABASE MOUNT
Mon Jul 23 14:22:39 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 14:22:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:05:53 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PSP0 started with pid=3, OS id=2235
MMAN started with pid=4, OS id=2237
PMON started with pid=2, OS id=2233
DBW0 started with pid=5, OS id=2239
LGWR started with pid=6, OS id=2241
CKPT started with pid=7, OS id=2243
SMON started with pid=8, OS id=2245
RECO started with pid=9, OS id=2247
CJQ0 started with pid=10, OS id=2249
MMON started with pid=11, OS id=2251
Tue Jul 24 08:05:55 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2253
Tue Jul 24 08:05:55 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:05:56 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:05:56 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:05:59 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:16:25 2007
Stopping background process CJQ0
Tue Jul 24 08:16:25 2007
Stopping background process MMNL
Tue Jul 24 08:16:26 2007
Stopping background process MMON
Tue Jul 24 08:16:27 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:16:27 2007
Stopping Job queue slave processes
Tue Jul 24 08:16:27 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 08:16:29 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:16:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3340
PSP0 started with pid=3, OS id=3342
MMAN started with pid=4, OS id=3344
DBW0 started with pid=5, OS id=3346
LGWR started with pid=6, OS id=3348
CKPT started with pid=7, OS id=3350
SMON started with pid=8, OS id=3352
RECO started with pid=9, OS id=3354
CJQ0 started with pid=10, OS id=3356
MMON started with pid=11, OS id=3358
Tue Jul 24 08:16:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3360
Tue Jul 24 08:16:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:16:32 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:16:32 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:16:32 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:38:07 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:43:09 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:49:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2224
PSP0 started with pid=3, OS id=2226
MMAN started with pid=4, OS id=2228
DBW0 started with pid=5, OS id=2230
LGWR started with pid=6, OS id=2232
CKPT started with pid=7, OS id=2234
SMON started with pid=8, OS id=2236
RECO started with pid=9, OS id=2238
CJQ0 started with pid=10, OS id=2240
MMON started with pid=11, OS id=2242
Tue Jul 24 08:49:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2244
Tue Jul 24 08:49:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:49:42 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:49:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:49:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:51:39 2007
Stopping background process CJQ0
Tue Jul 24 08:51:39 2007
Stopping background process MMNL
Tue Jul 24 08:51:40 2007
Stopping background process MMON
Tue Jul 24 08:51:41 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:51:41 2007
Stopping Job queue slave processes
Tue Jul 24 08:51:41 2007
Job queue slave processes stopped
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Tue Jul 24 08:51:42 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:51:45 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3070
PSP0 started with pid=3, OS id=3072
MMAN started with pid=4, OS id=3074
DBW0 started with pid=5, OS id=3076
LGWR started with pid=6, OS id=3078
CKPT started with pid=7, OS id=3080
SMON started with pid=8, OS id=3082
RECO started with pid=9, OS id=3084
CJQ0 started with pid=10, OS id=3086
MMON started with pid=11, OS id=3088
Tue Jul 24 08:51:45 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3090
Tue Jul 24 08:51:45 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:51:45 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:51:45 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:51:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:00:41 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:00:54 2007
Starting ORACLE instance (normal)
Tue Jul 24 09:01:02 2007
alter database open
Tue Jul 24 09:01:02 2007
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:01:21 2007
Shutting down instance: further logons disabled
Tue Jul 24 09:01:21 2007
Stopping background process CJQ0
Tue Jul 24 09:01:21 2007
Stopping background process MMNL
Tue Jul 24 09:01:22 2007
Stopping background process MMON
Tue Jul 24 09:01:23 2007
Shutting down instance (immediate)
License high water mark = 2
Tue Jul 24 09:01:23 2007
Stopping Job queue slave processes
Tue Jul 24 09:01:23 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 09:01:29 2007
PMON failed to acquire latch, see PMON dump
Tue Jul 24 09:01:29 2007
ALTER DATABASE CLOSE NORMAL
Tue Jul 24 09:01:29 2007
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 09:01:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3682
PSP0 started with pid=3, OS id=3684
MMAN started with pid=4, OS id=3686
DBW0 started with pid=5, OS id=3688
LGWR started with pid=6, OS id=3690
CKPT started with pid=7, OS id=3692
SMON started with pid=8, OS id=3694
RECO started with pid=9, OS id=3696
CJQ0 started with pid=10, OS id=3698
MMON started with pid=11, OS id=3700
Tue Jul 24 09:01:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3702
Tue Jul 24 09:01:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 09:01:31 2007
ALTER DATABASE MOUNT
Tue Jul 24 09:01:31 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:01:31 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:01:57 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:02:47 2007
alter database mount
Tue Jul 24 09:02:47 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:02:47 2007
ORA-205 signalled during: alter database mount...
I checked the /usr/lib/oracle/xe/oradata/XE/ directory, and there is nothing in that file...
I am also concerned about these lines near the top of the log:
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths -
ORA-12545: Connect failed because target host or object does not exist
Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
RobertHi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun -
Get ORA-12545: Connect failed because target host or object does not exist
Hi all,
My database is in RAC on a RHEL 5 and oracle 10.2.0.4 release, when i connect from client at the first time it's connected and after exit and connect again it gives the error ORA-12545: Connect failed because target host or object does not exist. and trying to tnsping i can reach the server and connect again it's connected and after disconnect and reconnect it gives the same error.
Here is my tnsnames from windows client:
CDRMGRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.116)(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.117)(PORT = 1522))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cdrmg)
In this tnsnames , i'm using the virtual ip address.
Thanks for your help
Lucienothi,
check the ping trace.. for how long the connection establish..
check whether its breaking ,.
regards,
Deepak -
ORA-12545: Connect failed because target host or object does not exist(EBS)
Hi All,
We are using Oracle EBS R12 on Linux x86 Enterprise Server.
We have installed vision database (both apps and db on same machine)
Host name: ERPDEV
IP:192.168.1.211
We can connect from client machines to our database using sqlplus i.e.
sqlplus apps/****@vision
Similarly tnsping is also successfully returning results.
Also following commands are returning results
ping erpdev
ping 192.168.1.211
ping erpdev.domainname.com
All above commands are running fine.
However we are trying to create new "Legal Address Entry" through "Legal Entry Manager". After filling all the details like Location,Country,City etc, when I push the apply button, getting following error messages:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1674 ORA-12545: Connect failed because target host or object does not exist in Package xle_legal_address_swi Procedure create_legal_address
I dont know why this ORA-12545 error is occuring through application although all of the above tests are running fine from client terminals.
Do any one have any solution for this???
Thanks
FarooqHi,
I really am new to this application.
I could not get this document.
Can you pls guide me, how can i fix this problem.
It's really imp to me to fix this.
--Satish -
TNS-12545: Connect failed because target host or object does not exist
Hi all, I have a bit of a problem, I have gone thru the posts and tried out suggestions but it didn't work. When i type in
LSNRCTL> services
I get this error:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=mattlek2)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.162.8)(PORT=1521)))
TNS-01189: The listener could not authenticate the user
When I type in : LSNRCTL> start
I get this:
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
System parameter file is C:\oracle\product\10.1.0\Db_2\network\admin\listener.ora
Log messages written to C:\oracle\product\10.1.0\Db_2\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mattlek2.ifactory.co.za)(PORT=1521)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.162.8)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
This is my tnsnames.ora file:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.1.0\Db_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
GPGWL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = GPGWL)
ORCL_LIVE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 196.36.116.218)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
APPS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 196.36.116.219)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = VIS)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
EXEL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = idev)
EXEL_IDEV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = idev)
This is my listener.ora file:
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_2\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = GPGWL)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = mattlek2)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
Any help would be greatly appreciated.
Thank youjust check the string key it should be
key=extproc_for_xe
Try -
Hi All,
Please find below ora error
ORA-20011: Approximate NDV failed..ORA-06564: object WRR_LPD23678 does not exist...
I got it from the alert log
Please let me know ...How to fix this issue...
Thanks
Pavan LAn error is for instance hit in dbms_stats.gather_table_stats for an
external table without its directory (external tables are excluded
when gathering statistics at database/schema level).>
OWNER TABLE_NAME DEFAULT_DIRECTORY_NAME
SYS xxxxxxxxxxxxxxxxxxxxx WRR_LPD23678BTW, what is your DB version? if it is already 11g the note mentioned as it is fixed in next version.
Or you can raise an SR too. -
Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
RegardsI personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.
-
Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?
Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne
-
Hi Folks
Application cloning is failing with "ORA-12505: TNS:listener does not currently know of SID given in connect"
Database cloning is completed successfuly . database cloned in two nodes node1 and node2
Now cloning applicatino tier with above cloned database nodes but faicing above issue .
ThanksThere are many reasons why an ORA-12505 might be raised at applications cloning. For anyone on this board to assist, you will have to post the log file detail or list the clone execution file which raises this exception.
Thanks,
Arif. -
ABAP Dump is encountered when doing the negative subsequent adjustment
Hi Experts !!!
An ABAP Dump is encountered when doing the negative subsequent adjustment (posting a 102 movt type) on a Purchase Order via the Z function module. The dump only happens if the scenario satisfies the following conditions:
1.Material is either (but may not be limited to) 3000000234, 4000000121, 3000000210 (These are the only reported materials)
2.Order unit in Purchase Order is in MT
3.At 2nd weigh, Net Weight is less than PO Order Qty.
Note: No error occurs if same process is done via MIGO.
Initial Analysis:
An exception/error occurs when calling function u201CMB_CREATE_MATERIAL_DOCUMENT_UTu201D .
Please see below error anlysis report from after executin Zfunction module code.
Error analysis
Short text of error message:
Material 3000000234 / US01 Column 0001: MSEG-BPMNG not in quantity table
/not consistent
Long text of error message:
Diagnosis
Before the system posts a material document for an HPM/TDP material
(MARA-CMETH = 1 or 2), it performs the following consistency
checks:
o For each unit of measure in the Unit of Measure Group
(MARC-UOMGR), a line item has to be present in the additional
quantity appendix table (Table MSEGO2)
o For each unit of measure in the main core table MSEG that is
not initial a line item, has to be present in the additional
quantity appendix table (Table MSEGO2) and the corresponding
packed format quantities have to be identical.
This way, inconsistent stock level updates can be prevented.
System Response
The system stops processing.
Procedure
If the error is reproducible, contact your system administrator.
Procedure for System Administration
The inconsitency can have several reasons, for example:
o Incorrect postings from external systems using function module
MB_CREATE_GOODS_MOVEMENT
o Handling errors
o Application programming errors
Technical information about the message:
Message class....... "O3"
Number.............. 359
Variable 1.......... 3000000234
Variable 2.......... "US01"
Variable 3.......... 0001
Variable 4.......... "BPMNG"
Please let me know,if you want some other details.Problem Issolved
-
Print with write statements from webynpro does not trigger top-of-page
Print launched from webdynpro application via application server created with write statements does not trigger top-of-page event. When print is done from sapgui it works ok. The idea is to reuse backend print which was created for sapgui with abap list made application log in webdynpro application.
Hi,
here a short extract like i do it:
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_PRINT_TOP_OF_PAGE
FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID,
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
* Event-Händer Implementierung
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
METHOD HANDLE_PRINT_TOP_OF_PAGE.
PERFORM PRINT_TOP_OF_PAGE.
ENDMETHOD.
ENDCLASS.
CREATE OBJECT GR_EVENT_HANDLER.
SET HANDLER
GR_EVENT_HANDLER->HANDLE_PRINT_TOP_OF_PAGE FOR GR_ALVGRID_LEFT.
CALL METHOD GR_ALVGRID_LEFT->SET_TABLE_FOR_FIRST_DISPLAY
FORM PRINT_TOP_OF_PAGE.
LINSZ = SY-LINSZ - 16.
WRITE: / 'Report: ', SY-REPID,
AT LINSZ 'Datum:', SY-DATUM.
WRITE: / 'Benutzer: ', SY-UNAME,
AT LINSZ 'Zeit: ', SY-UZEIT.
ENDFORM.
hope it helps.
Regards, Dieter -
Hello,
I am trying to trigger a scope at a certain point. I have a test signal coming after a regular sinusoid. I want to measure the output when the test signal arrives. What happens is that when my test signal comes after 1 second the trigger works perfectly fine but when my test signal comes after 3 seconds the scope does not trigger at the point I want and keeps on triggering at unwanted points. This is a conceptual question. Could anyone please help me in that.
Thanks,
KrunalHello Krunal,
I am not exactly sure what your external signal looks like, however I can suggest a couple things for you to look at. First, if the absolute value of your sine wave amplitude is less than the test point you want to measure, the scope can simply level trigger at that point. It should not matter if the signal comes in after 1 seconds or 3 seconds. The only problem you might be seeing with this is a timeout error. This is caused by the read function not being able to sample enough data within the default 5 seconds limit. Adjusting the timeout would help if you are getting this error.
If your test signal value you need to trigger off of is within the absolute value of your sine wave signal it becomes more difficult because if you specify to trigger off of a rising edge 0.5V signal this point will occur many times before the ideal trigger point. Perhaps a combination of using the trigger hold off and trigger delay might help you time the start of your acquisition a little better. If this does not help, can you please post more detail about the sine wave, your test point you want to trigger off and the behavior you are currently seeing.
Regards,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D
Maybe you are looking for
-
I have a some issues: 1. My HP Office Jet Pro L7555 scans but will not save to a flash drive. (I get error messaqges when I try to download it to my computer) What is the fix for that? 2. Sometimes when I turn it on it will indicate that one of the i
-
Email messages from my personal email account are being posted (copied) to SMS messages. I have a new cell device (swtched from Droid to iPhone) and this is happening on the new device also. The copy/forward to SMS is NOT being initiated by my emai
-
There were problems downloading some purchased items.
All episodes of Under cover boss season 2 downloaded apart from unifirst. After contacting Apple support I'e tried downloading on a different network and a different computer (Imac, then macbook and then ipad). I keep getting the following error.....
-
I'm ramping up on FrameMaker 9 and have been experimenting with using folders in book files. I like being able to add Frame files to the folder to organize content. But I also need to use conditional tags. In one version of my book, the entire conten
-
Datagrid ComboBox data repetition
I have made a datagrid and a column which has a ComboBox control which references a fixe length and data array to display the dropdown in the grid column. The problemis this array has to be repeated for every row of data in the grid. Is there anyway