Failed ABAP Transports metric has grey status

Dear colleagues,
in System monitoring I found Failed ABAP Transports metric has grey status. Then I checked Data Collection Status and found:
Log for mainextractor E2E_DPC_PULL_CORE has 14 warning(s) for the last 180
minutes.
In log I found:
Metric
005056B62E9D1ED1A7D246512DA45A0D/506A27FD986B4161E1008000AC100BB8 - Status: Data
Provider E2E_CONFIG_VAL : E2E_CONFIG_VAL: ABAP_TRANSPORTS;16.04.2014 05:03:45
-16.04.2014 06:04
Thenh I tried to use E2E_DPC_GET_DATA_CHECK
and found
Could you please help me to resolve this issue?
Thanks a lot ,
Alexander

Hello Aleksandr,
Please chek following notes according to your Solman version:
1975717 - ST710, SP10,11 System Monitoring 'Failed ABAP Transports' gray status
1792776 - ST710, SP06 System Monitoring 'Failed ABAP Transports'
BR,
K.

Similar Messages

  • DVM metrics grey status after SPS12

    Dear colleagues,
    After SPS12 implementation in System Monitoring DVM metrics has grey status and message:
    DPC: No data retrieved from provider E2E_DVM_ALERTS
    I tried to re-run DVM setup scenatio but no changes appears.
    Could you please help me to resolve this issue?
    Thanks a lot,
    Alexander

    Dear Divyanshu,
    I checked extractors and found extractors with errors:
    DVM Analyses Scheduler (Saving Potential) - Source RFC Destination not maintained
    DVM Size Statistics Extractor (DBCON) - NO_APPLICABLE_DATA
    Then I checked notes and found all notes implemented in system already.
    I tried to delete extractors and re-setup DVM scenario for system but no changes appears.
    Do you any idea?
    With best regards,
    Alexander

  • Message has Error status on outbound side - in ABAP inbound proxy !!

    Hi All,
    One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
    Regards
    San

    Hi ,
    Please check whether the  correct data  is coming from sender side .  and check the j2ee engine runtime parameters.
    Cheers,
    Meera
    Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

  • ** BPM Error - Msg has error status on oubound side

    Hi Friends,
    I am doing BPM scenario. (Receive Step --> Transformation Step --> In Block (For each) Synchronous Send Step ). That's all BPM design.
    We have created Server prox (inbound Proxy) in ABAP, it receives PO details and return Sales order no. Coding has been written inside Proxy. If we test Proxy in ABAP, it is working fine.
    The required PO data we pass from JDBC. Receive step receives the whole message (It may contain 1 or more PO). In Transformation step, we split message using multiline checkbox( One message per 1 PO).
    Message is processed successfully upto this step. In the Synchronous send step, it throws an error.
    In SXMB_MONI, 3 messages are generated. In the first message itself, in the outbound status column 'Red Flag' is coming, (but processed successfully).  The error is 'Message has error Status on outbound side'. Inside the message 'PE'  adapter is in grey color.
    So, what could be the problem ..?
    Kindly reply, friends.
    Kind Regards,
    Jegatheeswaran P.

    Hi Jegatheeswaran,
    Take the Message after transformation and try to test your synchronous service with this message,
    if u r using any web service you can use Altova (XML SPY) to test your service with the data after
    transformation.
    If it does not show any problem then try to see you have build your BPM Properly (Press F7 to test For any syntactical error).
    You can also go to SXI_CACHE to see if your Workflow does have status 0 .
    To get Exact error Message . Click on PE ->goto->ThechnicalSetting->select synchronous call->click on content tab->and go on navigating you will find detailed exception.
    Reward Points IF Helpful
    Thanks
    Sunil Singh

  • Mac has snow leopard and does not boot has grey screen

    IMac has snow leopard and does not boot has grey screen

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Imported Transport request has been deleted

    Dear all ,
    Imported Transport request has been deleted by mistakenly in my sandbox server .
    is there any issue will be happen.
    and one more Clarification
    usr\sap\trans\log --  this directory is contain 2 GB log files  . if i delete this log files or taken a backup to some other drives any issue will come .
    kindly advise me

    > Imported Transport request has been deleted by mistakenly in my sandbox server .
    If you have the source system where the transport was created you can use a simple ABAP like
    report ZRERELEASE_REQUEST
    PARAMETERS: TRAUFTRG(10) TYPE C DEFAULT 'SIDK'.
    parameters: status like e070-trstatus default 'D'.
    PARAMETERS: TEST(1) TYPE C DEFAULT 'X'.
    TABLES: E070.
    SELECT * FROM E070 WHERE TRKORR = TRAUFTRG.
       WRITE: / E070-TRKORR,  E070-TRSTATUS.
       IF TEST = ' '.
        MOVE status TO E070-TRSTATUS.
        WRITE: / E070-TRKORR,  E070-TRSTATUS.
        UPDATE E070.
       ENDIF.
    ENDSELECT.
    start it, enter your request number and execute. Then you can re-release the request.
    Markus

  • Message has error status at outbound side File To Idoc Scenario

    hi ,
    In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
    When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
    Please suggest what may be the problem ?
    Regards,
    Rohit

    1. First check the RFC destination name used in receiver Idoc adapter communication channel.
    2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
    3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
    4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
    Regards,
    Prateek

  • Message has error status on outbd. side (error in Moni)

    Hello All,
    Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
    when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
    How to reslove the issue, please help me.
    Thanks and regards,
    Chinna

    Hi
    Please check the below  i think your problem will solve
    Hi,
    Check whether IDoc was created:
    1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
    Check Whether IDoc is received by the Receiver:
    2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
    3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
    4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
    5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
    6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
    Thanks ,
    Meeravali Dudekula

  • Workflow Approval for CTS+ for NON ABAP Transport

    Hi
    We have a NW Portal system currently using CTS+ for transport.
    We would like to incorporate a workflow approval for transport across the different landscape (DEV -> TEST -> QA -> PRD) with CTS+. The workflow approval would work in such a way that when someone approves a transport request from DEV->TEST, the Basis Admin will then perform the import to TEST. So this approval will also be needed from TEST -> QA and QA -> PRD.
    Does Solution Manager provide such workflow approval for NON ABAP transport?
    I do hope anyone has such experience to share.
    Thanks.
    Regards
    mike

    Hi Mike
    Yes solution Manager CHARMS or Change request managment functionality uses CTS+ to move the Non ABAP requests
    it uses IBASE as identifier for systems and for more can search sdn
    check this link too
    http://www.sdn.sap.com/irj/sdn/alm-change-management
    Hope it helps
    Regards
    Prakhar

  • ABAP Transport Request

    I have a old abap transport request for a program which was transported to qa and production to restore the old version in the production server.
    when new changes were made to the program , along with the changes the latest version has gone to production , how can i solve this problem

    Hello,
    You need to create a new Transport, retrieve the old version of your program and send that Transport to Production.
    Once the Transport is released from your system, then you can again change the program in a new TR and make the new changes.
    Hope this helps,
    Regards,
    Himanshu

  • Ping DB has failed and DB Permissions has failed, cannot connect to DB??

    Hello all,
    I am trying to install fatwire on my Windows 7 platform and after successfully installing my Oracle Server, my Weblogic server, and successfully deploying my CS application, I keep getting the following error during Test CS Configuration:
    The status is as follows:
    HelloCS is successful.
    Ping DB has failed.
    DB Permissions has failed.
    Please check the C:/dev/fatwire/futuretense.txt for details.
    Once I do that, I find the following stack
    [2012-05-24 15:27:14.978][CS][ERROR] Exception processing CatalogManager request
    java.lang.Exception: Unknown cmdstr
         at COM.FutureTense.Common.R.execute(y:1706)
         at COM.FutureTense.Servlet.FTServlet.execute(y:1088)
         at COM.FutureTense.Servlet.FTServlet.doPost(y:3299)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:751)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:844)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:242)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:216)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:132)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:352)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:74)
         at com.fatwire.cs.core.logging.context.filter.ContextHeaderFilter.doFilterWork(y:526)
         at com.fatwire.cs.core.logging.context.filter.RunOncePerRequestFilter.doFilter(y:2152)
         at com.fatwire.cs.core.logging.context.filter.HttpFilter.doFilter(y:1020)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:74)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3288)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3254)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
         at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2163)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2089)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2074)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1512)
         at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:254)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Any ideas? Thanks

    So, I would expect that the error lies in the configuration of Sites to the db or with WLS's data source. I haven't run through a WLS install yet, so I don't know the specifics, but those are the installation steps that I would re-walk through to make sure I didn't miss any steps.
    the com.fatwire.logging.cs.db log can be found in the log4j.properties file. I believe that's the name. I don't have an instance open right now to double check, but take a look through this forum https://groups.google.com/forum/#!forum/webcentersites there were some other threads about using that trace.
    Let us know if you get it going!
    -ryan

  • My ipad2 safari is not responding and has greyed out

    safari on my ipad2 is not responding and has greyed out... is there a way i can sort it out ?

    If you follow Bob's instructions.. allow it to cool down.. maybe leave it off overnight.. if the disk fails to start when you power on.. or listen carefully and hear if the disk is failing to spin up properly then you have either dead drive or dead supply.
    Is it in warranty or applecare, let apple replace it?
    If it is out of applecare even, open it and replace the disk.
    How old is the TC? What model from the rubber mat A1xxx? What size disk?
    Certain drives are becoming unreliable.. The WD black in Gen2, The Samsung Spinpoint in Gen3 and WD green in Gen3 and Gen4 are none of them great drives.
    Out of warranty do the job yourself.. there is plenty of stuff about drive upgrades for the TC.
    Excellent instructions here.
    http://www.ifixit.com/Device/Apple_Time_Capsule

  • My Itunes wont start and at the same time the wifi option on my iphone has greyed out, what is the problem?? This is very frustrating

    my wi-fi has greyed out, how can i fix this?

    The WiFi radio has failed. The phone will need to be replaced.

  • Hi please help! After setting up a new mail account my wifi button has greyed out. I've tried rebooting it ie turning off and on but no joy. I'm a complete technophobe and have no idea what to do next. I can receive emails but am unable to reply. HELP PLS

    Please can someone help a total technophobe?!!! I have recently set up a new mail account and since I've done that my wifi button has greyed out. Not sure what happened as I had help from my daughter. She doesn't think that she did anything wrong as has been an iPhone user since day one!! She's at work now so I'm totally lost. Please help. Many thanks.

    it's' an issue on 4S..... here same problem, even after restore the firmware.... wifi and bt are lost....

  • Job scheduling failed because the user has no permission to access this rep

    Hi. I've OBIP 10.1.3.4.1.
    When I launch a print with the scheduler I see this error:
    oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    In this env. I've a LDAP Security Model and all the report and all the users work.

    Please check whether you have assigned below responsibility to the user trying to schedule report.
    XMLP_SCHEDULER

Maybe you are looking for