Failed back-up attempts

Ok whenever I sync my iPod, when it does the "backing up," it'll finish the back up but then it says that iTunes has stopped working. It does this on my laptop AND my PC with both my iPod and iPad. What do I do about this?

I also had this problem and when i asked a guy fro the apple store about it he said it might be the apple servers. He said that they were probably down and thats what ur ipod backs up to so if u try a diferent time it should work. Good luck!!

Similar Messages

  • I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

    I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
    The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
    Restarting my iPad does not help
    Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
    And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

    Did you try to set it up as new device, as explained in this article?
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Creative Cloud CS6 Bridge failed on an attempt to update - Bridge is now gone - how

    A few weeks ago Creative Cloud CS6 Bridge failed on an attempt to update - Bridge is now gone - how do I reinstall?

    Bridge in Cs6 come along with other creative suite product like PS, ID, Ai etc, it will be tough to do the installation of just Bridge without uninstalling any of this product through AAM.
    You can download the trial from Adobe.com of any of this software and can perform the repair installation to get back Bridge but I will be interested to know how Adobe Bridge vanished from computer all of a sudden, May be it is still there ?

  • Outlook 2013 CRASH AND BURN - with multiple 'failed VL activation attempt's just prior...

    Outlook 2013 crashing frequently,  have removed, reinstalled, etc etc - to no avail
    Before the "Outlook" crash, the application log always  shows multiple warnings as below:
    The rules engine reported a failed VL activation attempt.
    Reason:0x8007232B
    AppId = 0ff1ce15-a989-479d-af46-f275c6370663, SkuId = 771c3afa-50c5-443f-b151-ff2546d863a0
    Trigger=TimerEvent
    ===================
    "Off1ce15" - kind of a giveaway that this must be related, no??
    This is "Office Home and Business 2013 32-bit" on windows 8.1u1 (32 bit)
    Anybody at MS-support even remotely interested in troubleshooting this??

    There is a 'volume licence' Outlook2010 installed on this machine, it's been switched back and forth to this a few times, as Outlook 2013 has had numerous issues. The licence key was supplied by our Exchange server provider.
    I suspect that Windows simply doesn't clean up after itself! This (recent clean installation) W8.1u1 machine has gone through these versions:
    Office365 outlook2013 (trial) - which eventually crashed and burned, so I removed it.
    Outlook2013 'volume licence' from my Exchange Server provider - also crashed and burned, so I removed it.
    Outlook2010 'volume licence' from my Exchange Server provider.
    Office2013 Home and Business ( including Outlook 2013) - but the Outlook2013 crashed and burned, so I removed it, and re-installed the Outlook 2010, which was working fine. Exchange provider has supplied me a volume licence key for Outlook 2010, but
    I cannot for the life of me find a place to enter it!!
    Have tried clean boot of windows, it doesn't solve the issue of Outlook Crashing. All other Office2013 modules work fine, no problems whatsoever with Excel, Word, PPT, etc.
    Outlook safe mode doesn't work, either.. see these log excerpts:
    The program OUTLOOK.EXE version 15.0.4615.1000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
     Process ID: f78
     Start Time: 01cfb37dc73f3a2d
     Termination Time: 55
     Application Path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
     Report Id: 96150ae0-218a-11e4-afc1-002564df0634
     Faulting package full name: 
     Faulting package-relative application ID: 
    Faulting application name: OUTLOOK.EXE, version: 15.0.4615.1000, time stamp: 0x534cda15
    Faulting module name: OUTLOOK.EXE, version: 15.0.4615.1000, time stamp: 0x534cda15
    Exception code: 0xc0000005
    Fault offset: 0x00034171
    Faulting process id: 0xed0
    Faulting application start time: 0x01cfb5976bc8928a
    Faulting application path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
    Faulting module path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
    Report Id: aa3b48e7-218a-11e4-afc1-002564df0634
    Faulting package full name: 
    Faulting package-relative application ID: 
    The description for Event ID 2001 from source Microsoft Office 15 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
    computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    Microsoft Outlook
    Outlook couldn't start last time. Safe mode could help you troubleshoot the problem, but some features might not be available in this mode.
    Do you want to start in safe mode?
    The description for Event ID 2000 from source Microsoft Office 15 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
    computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    Microsoft Outlook
    Outlook failed to launch in safe mode. Do you want to start repair?
    ... and so on ...
    Immediately preceding the crash, there were hourly warnings as follow:
    The rules engine reported a failed VL activation attempt.
    Reason:0x8007232B
    AppId = 0ff1ce15-a989-479d-af46-f275c6370663, SkuId = 771c3afa-50c5-443f-b151-ff2546d863a0
    Trigger=TimerEvent
    coincidence??
    Will check out that OffCat tool, thanks!

  • Users contacts missing after failing over and then failing back pool

    We have 2 Lync enterprise pools that are paired.
    3 days ago, I failed the central management store, and all users from pool01 to pool02.
    This morning, I failed the CMS and all users back from pool02 to pool01.
    All users signed back in to Lync and no issues were reported. A user then contacted me to say that his contact list was empty.
    I had him sign out and back in to Lync, and also had him sign into Lync from a different workstation, as well as his mobile device. All of which showed his contacts list as empty.
    We have unified contacts enabled (Hybrid mode with Office 365 exchange online, and Lync on prem). When I check the users Outlook contacts, I can see all of his contacts listed under "Lync Contacts", along with the current presence of each user.
    If I perform an export-csuserdata for that user's userdata, the XML file contained within the ZIP file shows the contacts that he is missing.
    I've also checked the client log on the workstation too, and can see that Lync can see the contacts as it lists them in the log. They do not appear in the Lync client though.
    Environment details:
    Lync 2013 - 2 enterprise pools running the latest December 2014 CU updates.
    Lync 2013 clients - running on Windows 8.1. User who is experiencing the issue is running client version 15.0.4675.1000 (32 bit)
    I have attempted to re-import the user data using both import-csuserdata (and restarting the front end services) and update-csuserdata. Both of these have had no effect.

    Hi Eason,
    Thanks for your reply. I've doubled checked and can confirm that only one policy exists, which enables it globally.
    I believe this problem relates to issues that always seem to happen when ever our primary pool is failed over to the backup pool, and then failed back.
    What I often see is that upon pool failback, things like response group announcements don't play on inbound calls (white noise is heard, followed by the call disconnecting), and agents somehow get signed out of queues (although they appear to be signed in to
    the queue when checking their Response Group settings in their Lync client. I've also noticed that every time we fail back, a different user will come to me and report that either their entire contacts list is missing, or that half of their contacts are missing.
    I am able to restore these from backup though.
    This appears to happen regardless of if the failover to the backup pool is due to a disaster, or to simply perform pool maintenance on our primary pool.

  • The processing of Group Policy failed. Windows attempted to read the file...

    Hello all-
    I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
    Here are the steps I am currently taking:
    I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
    I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies.  The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
    I change the GPO Enforced setting to Enforced.
    I attempt to use the gpupdate command to see if the group policy can be updated successfully.  In a command prompt, I type gpupdate <enter>.  I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
    I keep the cmd window open.  After about 10 seconds another message apperas which says "Computer policy could not be updated successfully.  The following errors were encountered: The processing of Group Policy failed.  Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful.  Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
    I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
    Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created!  I have no other group policies linked or enforced to any other OU/Domain/etc.  Any help resolving this issue would be greatly appreciated.

    Hello all and thanks for the help.  First a few things:
    I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
    Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100.  If I were to use the server as the DHCP, what would my hardware configuration have to look like?  I currently have the router plugged into the ISP modem, and then server plugged into the router.  All other clients connect to the router wirelessly.
    Here's the dcdiag output.  I tried dcdiag /fix but to no avail.
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    * Verifying that the local machine KELLERDCFS, is a Directory Server.
    Home Server = KELLERDCFS
    * Connecting to directory service on server KELLERDCFS.
    * Identified AD Forest.
    Collecting AD specific global data
    * Collecting site info.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
    The previous call succeeded
    Iterating through the sites
    Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    Getting ISTG and options for the site
    * Identifying all servers.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
    The previous call succeeded....
    The previous call succeeded
    Iterating through the list of servers
    Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    * Identifying all NC cross-refs.
    * Found 1 DC(s). Testing 1 of them.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\KELLERDCFS
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    Determining IP6 connectivity
    * Active Directory RPC Services Check
    ......................... KELLERDCFS passed test Connectivity
    Doing primary tests
    Testing server: Default-First-Site-Name\KELLERDCFS
    Starting test: Advertising
    The DC KELLERDCFS is advertising itself as a DC and having a DS.
    The DC KELLERDCFS is advertising as an LDAP server
    The DC KELLERDCFS is advertising as having a writeable directory
    The DC KELLERDCFS is advertising as a Key Distribution Center
    The DC KELLERDCFS is advertising as a time server
    The DS KELLERDCFS is advertising as a GC.
    ......................... KELLERDCFS passed test Advertising
    Test omitted by user request: CheckSecurityError
    Test omitted by user request: CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    Skip the test because the event log File Replication Service does not exist.
    ......................... KELLERDCFS passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    ......................... KELLERDCFS passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... KELLERDCFS passed test SysVolCheck
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... KELLERDCFS passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    ......................... KELLERDCFS passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
    * SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
    * SPN found :LDAP/KELLERDCFS.keller-pa.net
    * SPN found :LDAP/KELLERDCFS
    * SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
    * SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
    * SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
    * SPN found :HOST/KELLERDCFS.keller-pa.net
    * SPN found :HOST/KELLERDCFS
    * SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
    * SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
    ......................... KELLERDCFS passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC KELLERDCFS.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=keller-pa,DC=net
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=keller-pa,DC=net
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=keller-pa,DC=net
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=keller-pa,DC=net
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=keller-pa,DC=net
    (Domain,Version 3)
    ......................... KELLERDCFS passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\KELLERDCFS\netlogon
    Verified share \\KELLERDCFS\sysvol
    ......................... KELLERDCFS passed test NetLogons
    Starting test: ObjectsReplicated
    KELLERDCFS is in domain DC=keller-pa,DC=net
    Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
    Object is up-to-date on all servers.
    ......................... KELLERDCFS passed test ObjectsReplicated
    Test omitted by user request: OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    ......................... KELLERDCFS passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 1600 to 1073741823
    * KELLERDCFS.keller-pa.net is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 1100 to 1599
    * rIDPreviousAllocationPool is 1100 to 1599
    * rIDNextRID: 1111
    ......................... KELLERDCFS passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: DFSR
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... KELLERDCFS passed test Services
    Starting test: SystemLog
    * The System Event log test
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 17:53:59
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 17:59:02
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:04:04
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:09:06
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:14:08
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:19:10
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:24:12
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:29:15
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:34:17
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:39:19
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    An Error Event occurred. EventID: 0x00000422
    Time Generated: 07/07/2009 18:49:23
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    ......................... KELLERDCFS failed test SystemLog
    Test omitted by user request: Topology
    Test omitted by user request: VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference)
    CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
    on
    CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    are correct.
    The system object reference (serverReferenceBL)
    CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
    and backlink on
    CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
    are correct.
    ......................... KELLERDCFS passed test VerifyReferences
    Test omitted by user request: VerifyReplicas
    Test omitted by user request: DNS
    Test omitted by user request: DNS
    Running partition tests on : ForestDnsZones
    Starting test: CheckSDRefDom
    ......................... ForestDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... ForestDnsZones passed test
    CrossRefValidation
    Running partition tests on : DomainDnsZones
    Starting test: CheckSDRefDom
    ......................... DomainDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... DomainDnsZones passed test
    CrossRefValidation
    Running partition tests on : Schema
    Starting test: CheckSDRefDom
    ......................... Schema passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Schema passed test CrossRefValidation
    Running partition tests on : Configuration
    Starting test: CheckSDRefDom
    ......................... Configuration passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Configuration passed test CrossRefValidation
    Running partition tests on : keller-pa
    Starting test: CheckSDRefDom
    ......................... keller-pa passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... keller-pa passed test CrossRefValidation
    Running enterprise tests on : keller-pa.net
    Test omitted by user request: DNS
    Test omitted by user request: DNS
    Starting test: LocatorCheck
    GC Name: \\KELLERDCFS.keller-pa.net
    Locator Flags: 0xe00013fd
    PDC Name: \\KELLERDCFS.keller-pa.net
    Locator Flags: 0xe00013fd
    Time Server Name: \\KELLERDCFS.keller-pa.net
    Locator Flags: 0xe00013fd
    Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
    Locator Flags: 0xe00013fd
    KDC Name: \\KELLERDCFS.keller-pa.net
    Locator Flags: 0xe00013fd
    ......................... keller-pa.net passed test LocatorCheck
    Starting test: Intersite
    Skipping site Default-First-Site-Name, this site is outside the scope
    provided by the command line arguments provided.
    ......................... keller-pa.net passed test Intersite
    Here's the nslookup from Vista client:
    Microsoft Windows [Version 6.0.6001]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.
    C:\Users\Andrew>nslookup KELLERDCFS
    Server: UnKnown
    Address: 192.168.1.100
    Name: KELLERDCFS.keller-pa.net
    Addresses: 192.168.1.150
    192.168.1.100
    C:\Users\Andrew>
    Thanks again!

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • How to delete .inProgress from my failed back-up in Time Machine?

    So I deleted it my failed back-up and it doesn't want to be emptied in trash.. So because of that I can't back up now because my external hard drive is full because of that failed back up! Help please!!
    Thanks in advance!

    You shouldn't have to delete it -- Time Machine will "recover" it on the next backup.
    Depending on just when and how the backup failed, deleting the inProgress file can corrupt your backups. Usually, they can be repaired. See #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
    Have you fixed the problem that caused it to fail? If not, start with Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
    It will show you how to locate the message(s) that describe the problem, then help you fix it.
    If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.

  • ASA5510 sla monitor does not fail back

    I've been down this path before and never got a resolution to this issue.
    ASA5510 Security Plus
    Primary ISP conn is Comcast cable
    Secondary ISP conn is fract T1
    I duplicated the SLA code from http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml
    When I pull the conn from primary ISP the default route to the secondary comes up
    When I reconnect the primary the default route to the secondary does not go away.
    I must either reload the ASA or remove/readd the two default outside routes.
    Anyone have this same experience and could lend a hand?
    Are there any commands I might have in my config that break SLA?
    If so I would have hoped either the Configuration Guide or Command Reference for 8.2 would say so, but I don't see any mentioned.
    I'm working remotely with my customer so I can't play with this except on off-hours.
    ASA running 8.2(2) so as to use AnyConnect Essentials.
    Thx,
    Phil

    Pls. read and try the workaround.
    CSCtc16148    SLA monitor fails to fail back when ip verify reverse is applied
    Symptom:
    Route Tracking may fail to fail back to the primary link/route when restored.
    Conditions:
    SLA monitor must configured along with ip verify reverse path on the tracked interface.
    Workaround:
    1. Remove ip verify reverse path off of the tracked interface
    or
    2. add a static route to the SLA target out the primary tracked interface.
    [Wrap text]  [Edit this enclosure]
    Release-note: Added 09/23/2009 20:28:24 by kusankar
    [Unwrap text]  [Edit this enclosure]
    Release-note: Added 09/23/2009 20:28:24 by kusankar
    [Uwrap text]  [Edit this enclosure]
    fixed-in-broadview-8.3.1.1_interim-by-cl104097: Added 03/23/2010 11:54:08 by perforce
    fixed-in-broadview-8.3.1.1_interim-by-cl104097: Added 03/23/2010 11:54:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-broadview-8.3.1.1_interim-by-cl104097&ext=&type=FILE
    fixed-in-broadview-8.3.1.1_interim-by-cl104097: Added 03/23/2010 11:54:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-broadview-8.3.1.1_interim-by-cl104097: Added 03/23/2010 11:54:08 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-broadview-8.3.1.1_interim-by-cl104097: Added 03/23/2010 11:54:08 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-broadview-8.3.1_fcs_throttle-by-cl103850: Added 03/22/2010 15:48:05 by perforce
    fixed-in-broadview-8.3.1_fcs_throttle-by-cl103850: Added 03/22/2010 15:48:05 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-broadview-8.3.1_fcs_throttle-by-cl103850&ext=&type=FILE
    fixed-in-broadview-8.3.1_fcs_throttle-by-cl103850: Added 03/22/2010 15:48:05 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-broadview-8.3.1_fcs_throttle-by-cl103850: Added 03/22/2010 15:48:05 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-broadview-8.3.1_fcs_throttle-by-cl103850: Added 03/22/2010 15:48:05 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-broadview-bennu-by-cl101314: Added 02/18/2010 19:06:08 by perforce
    fixed-in-broadview-bennu-by-cl101314: Added 02/18/2010 19:06:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-broadview-bennu-by-cl101314&ext=&type=FILE
    fixed-in-broadview-bennu-by-cl101314: Added 02/18/2010 19:06:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-broadview-bennu-by-cl101314: Added 02/18/2010 19:06:08 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-broadview-bennu-by-cl101314: Added 02/18/2010 19:06:08 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-broadview-idfw-by-cl101317: Added 02/18/2010 19:09:07 by perforce
    fixed-in-broadview-idfw-by-cl101317: Added 02/18/2010 19:09:07 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-broadview-idfw-by-cl101317&ext=&type=FILE
    fixed-in-broadview-idfw-by-cl101317: Added 02/18/2010 19:09:07 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-broadview-idfw-by-cl101317: Added 02/18/2010 19:09:07 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-broadview-idfw-by-cl101317: Added 02/18/2010 19:09:07 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-broadview-logging-ng-by-cl101311: Added 02/18/2010 19:03:08 by perforce
    fixed-in-broadview-logging-ng-by-cl101311: Added 02/18/2010 19:03:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-broadview-logging-ng-by-cl101311&ext=&type=FILE
    fixed-in-broadview-logging-ng-by-cl101311: Added 02/18/2010 19:03:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-broadview-logging-ng-by-cl101311: Added 02/18/2010 19:03:08 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-broadview-logging-ng-by-cl101311: Added 02/18/2010 19:03:08 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-broadview-main-by-cl101300: Added 02/18/2010 18:27:07 by perforce
    fixed-in-broadview-main-by-cl101300: Added 02/18/2010 18:27:07 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-broadview-main-by-cl101300&ext=&type=FILE
    fixed-in-broadview-main-by-cl101300: Added 02/18/2010 18:27:07 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-broadview-main-by-cl101300: Added 02/18/2010 18:27:07 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-broadview-main-by-cl101300: Added 02/18/2010 18:27:07 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-sedona-64bit-by-cl101362: Added 02/19/2010 04:52:24 by perforce
    fixed-in-sedona-64bit-by-cl101362: Added 02/19/2010 04:52:24 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-sedona-64bit-by-cl101362&ext=&type=FILE
    fixed-in-sedona-64bit-by-cl101362: Added 02/19/2010 04:52:24 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-sedona-64bit-by-cl101362: Added 02/19/2010 04:52:24 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-sedona-64bit-by-cl101362: Added 02/19/2010 04:52:24 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-sedona-bv64-by-cl101426: Added 02/19/2010 11:42:41 by perforce
    fixed-in-sedona-bv64-by-cl101426: Added 02/19/2010 11:42:41 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-sedona-bv64-by-cl101426&ext=&type=FILE
    fixed-in-sedona-bv64-by-cl101426: Added 02/19/2010 11:42:41 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-sedona-bv64-by-cl101426: Added 02/19/2010 11:42:41 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-sedona-bv64-by-cl101426: Added 02/19/2010 11:42:41 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-sedona-main-by-cl101297: Added 02/18/2010 18:24:15 by perforce
    fixed-in-sedona-main-by-cl101297: Added 02/18/2010 18:24:15 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-sedona-main-by-cl101297&ext=&type=FILE
    fixed-in-sedona-main-by-cl101297: Added 02/18/2010 18:24:15 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-sedona-main-by-cl101297: Added 02/18/2010 18:24:15 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-sedona-main-by-cl101297: Added 02/18/2010 18:24:15 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-titan-8.2.2_fcs_throttle-by-cl101307: Added 02/18/2010 18:57:08 by perforce
    fixed-in-titan-8.2.2_fcs_throttle-by-cl101307: Added 02/18/2010 18:57:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-titan-8.2.2_fcs_throttle-by-cl101307&ext=&type=FILE
    fixed-in-titan-8.2.2_fcs_throttle-by-cl101307: Added 02/18/2010 18:57:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-titan-8.2.2_fcs_throttle-by-cl101307: Added 02/18/2010 18:57:08 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-titan-8.2.2_fcs_throttle-by-cl101307: Added 02/18/2010 18:57:08 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-titan-bennu-by-cl101294: Added 02/18/2010 18:24:08 by perforce
    fixed-in-titan-bennu-by-cl101294: Added 02/18/2010 18:24:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-titan-bennu-by-cl101294&ext=&type=FILE
    fixed-in-titan-bennu-by-cl101294: Added 02/18/2010 18:24:08 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-titan-bennu-by-cl101294: Added 02/18/2010 18:24:08 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-titan-bennu-by-cl101294: Added 02/18/2010 18:24:08 by perforce
    [Uwrap text]  [Edit this enclosure]
    fixed-in-titan-main-by-cl101282: Added 02/18/2010 16:48:04 by perforce
    fixed-in-titan-main-by-cl101282: Added 02/18/2010 16:48:04 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=fixed-in-titan-main-by-cl101282&ext=&type=FILE
    fixed-in-titan-main-by-cl101282: Added 02/18/2010 16:48:04 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    fixed-in-titan-main-by-cl101282: Added 02/18/2010 16:48:04 by perforce
    [Wrap Text]  [Edit this enclosure]
    fixed-in-titan-main-by-cl101282: Added 02/18/2010 16:48:04 by perforce
    [Uwrap text]  [Edit this enclosure]
    sla-mon-sh-tech: Added 09/23/2009 20:43:52 by kusankar
    sla-mon-sh-tech: Added 09/23/2009 20:43:52 by kusankarCan not view this .log file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=sla-mon-sh-tech&ext=log&type=FILE
    sla-mon-sh-tech: Added 09/23/2009 20:43:52 by kusankarCan not view this .log file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    sla-mon-sh-tech: Added 09/23/2009 20:43:52 by kusankar
    [Wrap Text]  [Edit this enclosure]
    sla-mon-sh-tech: Added 09/23/2009 20:43:52 by kusankar
    [Uwrap text]  [Edit this enclosure]
    static-analysis-titan-main: Added 02/18/2010 16:48:07 by perforce
    static-analysis-titan-main: Added 02/18/2010 16:48:07 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCtc16148&title=static-analysis-titan-main&ext=&type=FILE
    static-analysis-titan-main: Added 02/18/2010 16:48:07 by perforceCan not view this . file attachment inline, please click on the following link to view the attachment.
    http://
    [UnWrap text]  [Edit this enclosure]
    static-analysis-titan-main: Added 02/18/2010 16:48:07 by perforce
    [Wrap Text]  [Edit this enclosure]
    static-analysis-titan-main: Added 02/18/2010 16:48:07 by perforce
    -KS

  • Spiceworks Inventory service account many failed log on attempts

    I am having a problem with the inventory feature for spiceworks 7.3. We originally had version 6.2 hosted on our internal network (Which is not connected to the internet) and besides some random issues everything worked fine. We upgraded the client to 7.3 after some discussion. After we were still able to log in and see all of our information like before. We set a new password for the service account in spiceworks and in active directory. In 24 hours our auditing software showed that there were over 120,000 failed log on attempts from spiceworks and the account was locked out. After turning off many of the new features that check the network and setting up a new password it is still producing many failed log on attempts. Does anyone have a clue what could be causing this issue? And this network cannot connect to the internet to...
    This topic first appeared in the Spiceworks Community

    http://support.apple.com/kb/TS1643
    LOL
    Only 4 years. This issue has been there since iChat 2 and was first spotted with Zyxel routers/modems.
    It has become more of an Issue when using Port Forwarding on devices that now offer Protocol selection on Port Forwarding (port 5190 on the TCP for Login and UDP fro File Sharing and pics in chats) as one port can not be forwarded to two devices (it seems to cross over to just port forwarding twice in these devices).
    I have never known it happen on a Netgear.
    It is not limited to specific devices. There is some speculation that the AIM servers get too busy on port 5190 with several dozen clients as well as iChat and AIM on a PC using the same port.
    The AIM servers will in fact allow almost any port.
    443 has been suggested here by the regular posters as port used by Mail and Web browsers fro secure connections and therefore open in Tiger and earlier Firewalls and most modems and routers because it is below the 1024 threshold where ports need to be specifically opened.
    8:03 PM Friday; June 13, 2008

  • Failed user login attempts

    hi can u say  in which failed user login attempts will be stored.

    Hi,
    Configure the SAP audit system with TC SM19.
    Then use TC SM20 to see failed logins (and much more)
    cheers
      Jan

  • Fail back unsuccessful in Prime Infrastructure 2.0

    Fail back unsuccessful in Prime Infrastructure 2.0.
    Getting foll error while starting NCS services:
    health monitor running with an error....

    Hi Yusuf,
    there could be many reasons of the failure of the health monitor services ... could be a databases faulty..
    If you have  backup  or if your PI was running on VM and you have some snap shot then I would suuggest you to Restore(backup)  it.
    ***Try to reboot the server once before you try to restore the backup..
    Thanks-
    Afroz
    ****Ratings Encourages Contributors****

  • Time Machine "backup failed" Backing up to Time Capsule (first backup)

    I just received my iMac (24", 3.04 ghz, 4 gig ram) a few days ago...my firs Mac, after over 20 years with pc's. All working fairly well, as I try to learn the new format. Attempted my first backup last night using Time Machine, backing to Time Capsule. As I went to bed, it stated it was "preparing". This morning it stated "backup failed". "Time Capsule error". The networking aspects of Time Capsule are working without a problem. Unfortunately, the error message is vague and I'm definitely illiterate when it comes to much of the properties of a Mac. Any suggestions as to how I should proceed in investigating the problem? Thanks!!

    Well, I greatly appreciate the earlier advice. I have learned much in my reading. Of course, now with my "tinkering", I determined that the Time Capsule was not formatted to OS extended (journaled) as was my Macintosh harddrive. (Don't really understand why it would not come that way). I attempted to format using disk utility, now it doesn't show up in that application and under FINDER (shared devices), it is detailed as "sharepoint". I read elsewhere that it was recommended to use airport utility to reformat to OS Extended (journaled). Anyway, of course, now I've gone full circle and am comfused as to the proper way to have it formatted properly and recognized by disk utility. As such, currently I cannot use it for backup.
    Frequently, I'm my worsed enemy! Thanks again for the advice.

  • Time Machine/Capsule Continually Failing Back-up

    Hi,
    I have been having this issue for weeks now but whenever I attempt to back up my iMac (Mid 2011 Model, with Mountian Lion 10.8.3) it constantly fails and I have been running around these forums like crazy trying to find a solution. I bought my Time Capsule with my iMac, 2TB version. I also back-up my MacBook Pro (Mid 2012 Model) All of this started when for some reason Time Machine stopped working and I wipped everything and started again.
    It is connected wirelessly to my router and to both Macs (Too far away for me to hard wire).
    Here are the Logs:
    This is the first back-up I attempted
    Starting manual backup
    Attempting to mount network destination URL: afp://James%20Manning;[email protected]/James%20Manning's%20Ti me%20Capsul
    Mounted network destination at mount point: /Volumes/James Manning's Time Capsul using URL: afp://James%20Manning;[email protected]/James%20Manning's%20Ti me%20Capsul
    Disk image /Volumes/James Manning's Time Capsul/James Manning’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 3311EE67-6B40-3289-B7AD-B3B6E5D57FDA eventDBUUID: D93C99D1-2C53-45B1-ADCC-5BA677F55A72)
    Warning: Bytes to copy estimate was negative (-41364310749)
    Found 956922 files (104.9 MB) needing backup
    104.9 MB required (including padding), 760.66 GB available
    Indexer unavailable (1)
    Copied 382.1 MB of 382.1 MB, 341734 of 956922 items
    Stopping backup.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-34) SrcErr:NO Copying /System/Library/Perl/Extras/5.10/Regexp/Common/_support.pm to /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac/2013-03-24-211355.inProgress/98ABE1C5-5F7D-47A3-9E56-7460EB79983E/Macintos h HD/System/Library/Perl/Extras/5.10/Regexp/Common
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copied 732284 files (388.8 MB) from volume Macintosh HD.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copy stage failed with error:28
    Error: (5) getxattr for key:com.apple.backupd.SnapshotVolumeUUID path:/Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac/2013-03-24-211355.inProgress/98ABE1C5-5F7D-47A3-9E56-7460EB79983E/Macintos h HD
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Backup failed because the network destination disk was ejected or disconnected unexpectedly!
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    couldn't determine volume-uuid of mount point: /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac, error: Error Domain=NSCocoaErrorDomain Code=4 "The file “James Manning’s iMac” doesn’t exist." UserInfo=0x7f873c049840 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac}
    Backup failed with error: 27
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -106; status: -35; dissenting pid: -1)
    Failed to eject Time Machine disk image: /Volumes/James Manning's Time Capsul/James Manning’s iMac.sparsebundle
    Starting automatic backup
    Attempting to mount network destination URL: afp://James%20Manning;[email protected]/James%20Manning's%20Ti me%20Capsul
    Mounted network destination at mount point: /Volumes/James Manning's Time Capsul using URL: afp://James%20Manning;[email protected]/James%20Manning's%20Ti me%20Capsul
    Disk image /Volumes/James Manning's Time Capsul/James Manning’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 3311EE67-6B40-3289-B7AD-B3B6E5D57FDA eventDBUUID: D93C99D1-2C53-45B1-ADCC-5BA677F55A72)
    Found 956922 files (Zero KB) needing backup
    104.9 MB required (including padding), 759.62 GB available
    Indexer unavailable (1)
    Copied 95 KB of Zero KB, 431762 of 956922 items
    Copied 1.8 GB of Zero KB, 796914 of 956922 items
    Copied 7.66 GB of Zero KB, 796914 of 956922 items
    Copied 12.17 GB of Zero KB, 796914 of 956922 items
    Copied 17.61 GB of Zero KB, 796914 of 956922 items
    Copied 23.05 GB of Zero KB, 796914 of 956922 items
    Copied 27.14 GB of Zero KB, 796914 of 956922 items
    Copied 29.02 GB of Zero KB, 796914 of 956922 items
    Copied 31.41 GB of Zero KB, 796914 of 956922 items
    Copied 33.26 GB of Zero KB, 796914 of 956922 items
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-36) SrcErr:NO Copying /Users/Deleted Users/Rocvig.dmg to /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac/2013-03-24-211355.inProgress/78ABD744-A744-4FCE-8767-3C0A5DC00400/Macintos h HD/Users/Deleted Users
    Backup failed because the network destination disk was ejected or disconnected unexpectedly!
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    Stopping backup.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-8062) SrcErr:NO Copying /Users/Deleted Users/Rocvig.dmg to /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac/2013-03-24-211355.inProgress/78ABD744-A744-4FCE-8767-3C0A5DC00400/Macintos h HD/Users/Deleted Users
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copied 796914 files (113.2 GB) from volume Macintosh HD.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copy stage failed with error:11
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    couldn't determine volume-uuid of mount point: /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac, error: Error Domain=NSCocoaErrorDomain Code=4 "The file “James Manning’s iMac” doesn’t exist." UserInfo=0x7f873c02dc90 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac}
    Backup failed with error: 27
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -108; status: -35; dissenting pid: -1)
    Failed to eject Time Machine disk image: /Volumes/James Manning's Time Capsul/James Manning’s iMac.sparsebundle
    And the Lastest attempt:
    Starting manual backup
    Attempting to mount network destination URL: afp://James%20Manning;[email protected]/James%20Manning's%20Ti me%20Capsul
    Mounted network destination at mount point: /Volumes/James Manning's Time Capsul using URL: afp://James%20Manning;[email protected]/James%20Manning's%20Ti me%20Capsul
    Disk image /Volumes/James Manning's Time Capsul/James Manning’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 3311EE67-6B40-3289-B7AD-B3B6E5D57FDA eventDBUUID: D93C99D1-2C53-45B1-ADCC-5BA677F55A72)
    Found 956922 files (Zero KB) needing backup
    104.9 MB required (including padding), 659.19 GB available
    Copied 2.43 GB of Zero KB, 79237 of 956922 items
    Copied 4.32 GB of Zero KB, 79237 of 956922 items
    Copied 6.13 GB of Zero KB, 79237 of 956922 items
    Copied 8.81 GB of Zero KB, 79237 of 956922 items
    Copied 11.55 GB of Zero KB, 79237 of 956922 items
    Copied 13.49 GB of Zero KB, 79237 of 956922 items
    Copied 15.91 GB of Zero KB, 79241 of 956922 items
    Copied 18.65 GB of Zero KB, 209186 of 956922 items
    Copied 21.6 GB of Zero KB, 250539 of 956922 items
    Backup failed because the network destination disk was ejected or disconnected unexpectedly!
    Stopping backup.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-34) SrcErr:NO Copying /Applications/StarCraft II/Campaigns/Liberty.SC2Campaign/Base.SC2Assets to /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac/2013-03-24-211355.inProgress/E9E8BB3A-3DDF-4E77-B2B0-02BA29A6D68B/Macintos h HD/Applications/StarCraft II/Campaigns/Liberty.SC2Campaign
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copied 250539 files (23.96 GB) from volume Macintosh HD.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copy stage failed with error:28
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    couldn't determine volume-uuid of mount point: /Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac, error: Error Domain=NSCocoaErrorDomain Code=4 "The file “James Manning’s iMac” doesn’t exist." UserInfo=0x7feea2428c30 {NSURL=file://localhost/Volumes/Time%20Machine%20Backups/Backups.backupdb/James %20Manning%E2%80%99s%20iMac, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/James Manning’s iMac}
    Backup failed with error: 27
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -106; status: -35; dissenting pid: -1)
    Failed to eject Time Machine disk image: /Volumes/James Manning's Time Capsul/James Manning’s iMac.sparsebundle
    Any help would be appreciated!

    Hello CaribouMaine55,
    Thank you for using Apple Support Communities!
    I was researching what might be going on here, and found a great article named Time Machine: Troubleshooting backup issues found here http://support.apple.com/kb/HT3275.
    It is pretty lengthy but I feel has the best advice for getting your Time Machine up and running.
    All the very best,
    Sterling

  • Gnome login fails at first attempt

    Hi guys,
    I'm having a strange problem here.
    When I boot my notebook and try to login into Gnome, it constantly fails at the first attempt.
    So I click on my username, enter the (correct) password and nothing happens. I cancle it with 'esc', click on the username again, enter the password and I'm in.
    This also occurs when I lock my screen.
    Any ideas why Gnome tries to troll me and how to fix it?
    Thanks.
    Specs:
    Macbook pro 5,5
    GDM 3.10.0.1
    GNOME Shell 3.10.4
    Any more information needed? Let me know.

    I did a checkup von /var/log/gdm/:0.log but didn't find anything that might give me an hint
    Here is the output of the logfile
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.12.5-1-ARCH x86_64
    Current Operating System: Linux antartica 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 rw quiet
    Build Date: 09 January 2014 08:47:24AM
    Current version of pixman: 0.32.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 24 17:11:42 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Automatically adding GPU devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling Mouse0
    (--) PCI:*(0:2:0:0) 10de:0863:106b:00b9 rev 177, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension Present
    Initializing built-in extension DRI3
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    (II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
    Loading extension GLX
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    (II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (++) using VT number 1
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 1.0.0
    (WW) Unresolved symbol: fbGetGCPrivateKey
    (II) Loading /usr/lib/xorg/modules/libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 1.0.0
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling 2D acceleration
    (II) NVIDIA(0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(0): Vision stereo.
    (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    (II) NVIDIA(0): NVIDIA GPU GeForce 9400M (C79) at PCI:2:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
    (--) NVIDIA(0): Valid display device(s) on GeForce 9400M at PCI:2:0:0
    (--) NVIDIA(0): Apple Color LCD (DFP-0) (boot, connected)
    (--) NVIDIA(0): DFP-1
    (--) NVIDIA(0): DFP-2
    (--) NVIDIA(0): Apple Color LCD (DFP-0): Internal Single Link LVDS
    (--) NVIDIA(0): Apple Color LCD (DFP-0): 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): DFP-2: Internal DisplayPort
    (--) NVIDIA(0): DFP-2: 480.0 MHz maximum pixel clock
    (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    (**) NVIDIA(0): device Apple Color LCD (DFP-0) (Using EDID frequencies has
    (**) NVIDIA(0): been enabled on all display devices.)
    (==) NVIDIA(0):
    (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    (==) NVIDIA(0): will be used as the requested mode.
    (==) NVIDIA(0):
    (II) NVIDIA(0): Validated MetaModes:
    (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
    (--) NVIDIA(0): DPI set to (112, 112); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    (II) NVIDIA(0): configuration option may not be set correctly. When the
    (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
    Loading extension NV-GLX
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (==) NVIDIA(0): Backing store enabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) NVIDIA(0): DPMS enabled
    Loading extension NV-CONTROL
    Loading extension XINERAMA
    (II) NVIDIA(0): [DRI2] Setup complete
    (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    (--) RandR disabled
    (II) Initializing extension GLX
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 2.8.2
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event3"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device Power Button (/dev/input/event1)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event1"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Sleep Button'
    (**) Sleep Button: always reports core events
    (**) evdev: Sleep Button: Device: "/dev/input/event2"
    (--) evdev: Sleep Button: Vendor 0 Product 0x3
    (--) evdev: Sleep Button: Found keys
    (II) evdev: Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (II) xfree86: Adding drm device (/dev/dri/card0)
    setversion 1.4 failed: Permission denied
    (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
    (II) config/udev: Adding drm device (/dev/dri/card1)
    (II) xfree86: Adding drm device (/dev/dri/card1)
    removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
    (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: removing device Power Button
    (II) evdev: Power Button: Close
    (II) config/udev: Adding input device Power Button (/dev/input/event1)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event1"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    (II) config/udev: removing device Sleep Button
    (II) evdev: Sleep Button: Close
    (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Sleep Button'
    (**) Sleep Button: always reports core events
    (**) evdev: Sleep Button: Device: "/dev/input/event2"
    (--) evdev: Sleep Button: Vendor 0 Product 0x3
    (--) evdev: Sleep Button: Found keys
    (II) evdev: Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    (II) config/udev: removing device Power Button
    (II) evdev: Power Button: Close
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event3"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    removing GPU device /sys/devices/pci0000:00/0000:00:10.0/0000:02:00.0/drm/card0 /dev/dri/card0
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (II) xfree86: Adding drm device (/dev/dri/card0)
    setversion 1.4 failed: Permission denied
    (II) config/udev: Adding input device applesmc (/dev/input/event7)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Apple Computer, Inc. IR Receiver (/dev/input/event8)
    (**) Apple Computer, Inc. IR Receiver: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Apple Computer, Inc. IR Receiver'
    (**) Apple Computer, Inc. IR Receiver: always reports core events
    (**) evdev: Apple Computer, Inc. IR Receiver: Device: "/dev/input/event8"
    (--) evdev: Apple Computer, Inc. IR Receiver: Vendor 0x5ac Product 0x8242
    (--) evdev: Apple Computer, Inc. IR Receiver: Found keys
    (II) evdev: Apple Computer, Inc. IR Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Apple Computer, Inc. IR Receiver" (type: KEYBOARD, id 9)
    (II) config/udev: Adding input device applesmc (/dev/input/js0)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Built-in iSight (/dev/input/event6)
    (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Built-in iSight'
    (**) Built-in iSight: always reports core events
    (**) evdev: Built-in iSight: Device: "/dev/input/event6"
    (--) evdev: Built-in iSight: Vendor 0x5ac Product 0x8507
    (--) evdev: Built-in iSight: Found keys
    (II) evdev: Built-in iSight: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 10)
    (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
    (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
    (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
    (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
    (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x237
    (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
    (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 11)
    (II) config/udev: Adding input device bcm5974 (/dev/input/event9)
    (**) bcm5974: Applying InputClass "evdev touchpad catchall"
    (**) bcm5974: Applying InputClass "Multitouch Touchpad"
    (**) bcm5974: Applying InputClass "touchpad catchall"
    (**) bcm5974: Applying InputClass "Default clickpad buttons"
    (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 1.7.4
    (II) Using input driver 'synaptics' for 'bcm5974'
    (**) bcm5974: always reports core events
    (II) synaptics: bcm5974: found clickpad property
    (--) synaptics: bcm5974: x-axis range -4460 - 5166 (res 0)
    (--) synaptics: bcm5974: y-axis range -75 - 6700 (res 0)
    (--) synaptics: bcm5974: pressure range 0 - 256
    (--) synaptics: bcm5974: finger width range 0 - 16
    (--) synaptics: bcm5974: buttons: left double triple
    (--) synaptics: bcm5974: Vendor 0x5ac Product 0x237
    (--) synaptics: bcm5974: touchpad found
    (**) bcm5974: always reports core events
    (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
    (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
    (**) synaptics: bcm5974: (accel) AccelFactor is now 0.017
    (**) bcm5974: (accel) keeping acceleration scheme 1
    (**) bcm5974: (accel) acceleration profile 1
    (**) bcm5974: (accel) acceleration factor: 2.000
    (**) bcm5974: (accel) acceleration threshold: 4
    (--) synaptics: bcm5974: touchpad found
    (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
    (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
    (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(GPU-0): Vision stereo.
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(GPU-0): Vision stereo.
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(GPU-0): Vision stereo.
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(GPU-0): Vision stereo.
    (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(GPU-0): Vision stereo.
    (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
    (II) NVIDIA(GPU-0): Vision stereo.
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server

Maybe you are looking for

  • Using a seperate thread to control motors

    Hi am new to Java and am struggling with a probelm. The application is to control 4 motors connected to the parallel port. When the user presses a button the motor is set to a certain speed (byte output to port). Once the button is released the port

  • File name completion

    I am running Korn Shell on Solaris (on SUN Ultra 60) and have a problem with file name completion. Prior to Korn I ran C-shell and after set filec=on the filename completion worked ok. Although my understanding is that Korn shell have this feaure bui

  • How do I change my Team Name?

    How do I change my Team Name?

  • Cleaning up old files on disk

    What's the best method folks are using to clean up their hard drives, and get rid of obsolete files?

  • Backup to Disk and Tape

    Looking to convert our RMAN Tape backups to Disk using incr merge. RUN { RECOVER COPY OF DATABASE WITH TAG 'incr_update'; BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_update' DATABASE; Then we want to backup all backupsets to tape fo