Failed Batch Capture - Broken Timecode

Hello,
I'm attempting to capture some old footage from a project I had done in Premiere about a year ago.
There is clip in particular I'm trying to capture where the timecode was broken - premiere attempts to capture the first 8 minutes of my clip and then stops and gives me an error stating that the timecode was broken.
Is there anyway to force premiere to capture this clip all the way through and ignore the broken timecode point?
It's not a big deal to capture the clip "manually" but the problem is that I had split up and edited this clip so much, I'd rather batch capture it so that it will automatically appear on my sequence and I won't have to re-edit the whole thing.
Thanks!
FOO

I also have a Canopus card (in a system with Premiere 6.5) and broken timecode ("timecode hell" as I call it) was really only an issue when the tape pre-rolled over the break point during batch capture.
Do you still have the old Canopus .avi? You could use their util for CDVC <-> DVSD conversions:
http://download.videohelp.com/download/Canopus_DV_File_Converter.exe

Similar Messages

  • Batch Capture and Timecodes

    I am trying to batch capture a selection of 25 clips from a logging bin in FCP 5.1 and while connected to the camera, the program will not allow me to do so as it says that it cannot find a timecode. I'm new to this and do not know how to remedy the situation. How do I proceed or put in a timecode?

    AH...OK then.
    Timecode is written to the tape when you shoot. It isn't that time of day thing you see, but when you shuttle the tape back and forth, in the Capture window you see 1:00:00:00...or 1:11:34:20 or 00:34:45:19...stuff like that. THAT is the timecode.
    Now...FCP needs to get a run at the footage before it can capture. Like a track athlete needs a running start to do the Long Jump. He needs to back up...run and then LEAP. Similarly, FCP (and every other editing software) needs to do that with tape. The reason is they need the tape to reach a constant speed. When you first press play, the speed might waver for a few seconds, then settle. FCP needs that footage to settle, so it needs 3-5 seconds (default is 5 seconds) of what is called PRE-ROLL (length of track) to get a running start with the footage. If you don't give FCP this 5 seconds, it will try to back up and hit the beginning of the tape...literally a fence. It doesn't have enough room..so it will say "hey, there isn't any timecode here for me to get a running start. There is this big chain fence in my way." So it won't capture.
    You need to make sure you log the first clip at least 6 seconds from the head of the tape. This is one reason professionals record 30 seconds of color bars, or black, at the head of each tape.
    And if you have timecode breaks, where the timecode restarts again at 00:00:00:00...you need to log the shot 6 seconds AFTER that too...and then manually move the tape to After that break, then capture. Other wise FCP might not see it, and will capture again from the first section of video.
    Video is complex stuff...
    Shane

  • Batch Capture Error: Timecode Error: End of Tape Reached

    I have been having issues doing batch capture with my JVC VS30U. I logged all my clips on the fly and did the entire tape, so the OUT point of one clip is the same as the IN point of the next clip. When I attempt to batch capture it gives this error between every clip.
    I have to hit retry, sometimes more than once, in order for the deck to properly cue and FCP to start the digitize. I don't know if this is a weird pre-roll issue, or something else, but it completely defeats the purpose of a batch if I have to sit here and hit retry after each clip.
    There are no TC breaks, and obviously its not really the end of the tape. I've read where people have similar problems, but didn't find a solution. Have already trashed prefs, but to no avail. Using FCP 5.0.4 with OS 10.4.3 and said JVC deck via firewire.
    Any ideas? Thanks in advance!

    I don't know the deck but a simple test would be to move a couple of i/o points so they are not adjacent. Or test with a single, longer clip and break it up into subclips.
    Tell us what you've tried so we don't waster your time and ours with fruitless suggestions.
    Errors displayed by FCP are usually irrelevant and rarely helpful.
    bogiesan

  • FCP 5 Batch capture broken...

    I've been fighting with FCP since version 1, so I know it's not a simple case of bad prefs or something, this is a real debilitating problem... HELP!!
    I'm using a Kona LS and a rented A500 Digi Beta deck and I just upgraded to FCP 5 and now batch capture no longer works. It started out with drop frame messages while trying to capture 8bit to DVCpro50. last week with fcp 4.5 I was capturing 10 bit uncopressed on the same set up. the only thing i've changed is the recommended system updates (security, etc) before upgrading to 5.02. I'm capturing to a series of g-raid 500s. AJA tech support told me to get a FW800 card, so I did and the drop frame messages went away, but then FCP started shorting the clips. what I mean is that on a 45 minute capture, it stopped 3 and a half minutes before the end and sent me back to the insert reel window with "Ready" next to the clip and the wrong, shorter time showing for the capture length. Now I've noticed that if I try to batch capture a clip the logged duration does not match the capture duration. I've tried rebooting from my backup drive with 4.5, and it has the same problem, so I think it was one of the system and or QT updates that broke things.
    I've tried the latest updates, I've tried a manual uninstall and re install, i've tried going back to an older version of QT, I've tried qoing back to FCP 4.5 but nothing works.
    Any one come accross this yet?

    Have you tried resetting your fcp preferences?  You're going to have to do some digging to find out how to reset them as it's been years since many of us have worked in fcp5.1  Someone may pipe up, but if not, do some searching here and google.

  • Broken Timecode during capture  in FCP 5.04 Tape does not have broken time?

    I am trying to capture video froma mini dv canon camera and fcp is telling me that there is broken timecode. I have checked it with imov with no problem and when I view the tape there is no broken timecodde? can anyone help
    Thanks
    joe

    iMovie does not use timecode.
    Canons are notorious for weak timecode and firewire support. Try capturing the tape using another DV player.
    x

  • Unable to locate timecode in batch capture

    Hi there, I have been working on this problem for a while and would really appreciate some help.
    I have a documentary project I have been working on for some time and have completed the EDL. I am now trying to batch capture the footage again in full res and am having problems with a couple of the tapes.
    First the specs:
    The video was shot on a Sony HDR-HC1 in HDV(1080) mode.
    I am using this camera to capture the footage.
    I am trying to recapture the footage in a sequence with the easy setting on HDV1080i50.
    I had originally captured the footage in SD on an older version of final cut pro (I am now working with FCP6) and didn't realise that my 16:9 footage was actually all 4:3 letterboxed. To fix this problem I used the media manager to export and then in the new project batch capture all the footage again from the tape. The project uses 18 tapes, 16 of which were batch digitised with only minor troubleshooting required. However 2 of the tapes are proving to be very problematic. It seems that whatever clip I select on the tape it gives me a message saying "unable to locate timecode".
    I have tried setting the tape to the exact location of the clip before selecting the batch capture, but the computer always seems to look for a spot which is 2-3 mins out of sync with the clip. For example, if the in point is 00:10:00:00 the computer will roll the tape to around the 00:12:00:00 mark and start jogging around there for about 30 seconds until eventually giving me the "unable to locate timecode" message. Looking in the information in the bins, the in and out points are accurate, its just that when I try to capture, the computer rolls the tape to the wrong position.
    If anyone knows a workaround for this that will help me avoid having to edit the footage all over again I will be extremely grateful.
    Thanks
    Liam

    HI I have the same problem, the capture window says: Waiting for time code, the device must set in vcr mode and then This operation could not be complete as there is no video, the F!#!%$$ problem is very illogical ,at this mooring I do batch capture without a problem but since the second tape this problem starting, I update to FCP 6.0.4 and,. @@#%#@%#$ the first tape capture but the second not capture and the problem starting againd, note that IMOVIE capture the tape and work very well, iI replace fire wire, camera VCR and , I trayu with Canon, Sony, JVC and the problem persist , I have quicktime 7.4.5, FCO 6.0.4, note that I have two Macs with the same problem in both macs IMOVIE work like a PRO edition Software but FCP is very bad, I have with this problem a long time, I formated Mac, reinstall FCS2 many timers and the problem persist. IS not a problem whit easy setup or wherever , I download the FireWire SDK from Apple and test all connection with the applications of sdk and in all case , the camera and the fire wire are OK, the problem is with quicktime and FCP, If any one is working OK with FCP and DV NTSC devices and JVC PRO HD devices, please tell us HOW DO. I'm working with FCP since 2000 and in this month FCP makes me very UNHAPPY.

  • Help with Batch Capturing, Timecode Issues?

    Hi Final Cut Pro Pro's. I've just come over from Avid.
    I have a problem with capturing - I have a lot of tapes to capture and there is no way I will make deadline doing it by individual capture - I need to batch capture. My tape shows no timecode breaks and I have already spent hours logging all the various clips. It shows it has registered all of the media start/end timecodes, but when I click on batch capture, it says
    BATCH CAPTURE: TIMECODE ERROR: UNABLE TO LOCATE THE SPECIFIED TIMECODE. YOU MAY HAVE SPECIFIED A TIMECODE WITH INSUFFICIENT ROOM FOR A PRE/POST ROLL OPERATION.
    I don't understand as there is clearly a functioning timecode? This is going to break my balls if I have to go through this individually, no time! Anyone? Any ideas?
    Thank you.

    I'm capturing from the camera directly, a Sony DSR-250...
    It turns out that yes, if you have marked the in/out point too close to the head or the tail of the tape, or even if you have marked it okay and are currently at the start/end of tape when pressing on batch capture it cannot send the command to the device. If you move forward or backward accordingly by five or six seconds it doesn't come up anymore.
    Thanks for all the responses, I'm going to make deadline now. Apple forums are my hot hot S€X.

  • Timecode error in batch capture

    I've searched this problem but still haven't found an answer. When I batch capture, I get a "Timecode error" and on about half the clips I logged I have to cancel out of the capture. some work,some don't. It's not a problem with the pre-roll at the beginning of the tape; I left plenty of room when I set the in/out, and the first clip is now captured anyway so it can't be the start of the tape. But every time I try to capture the rest of the clips, I get this error with some if not most of them. I've changed the setting to NDF and it doesn't seem to make a difference. I'm only capturing in the middle of the tape now, so the beginning and end have lots of space. Please someone tell me how to stop this! I just upgraded to Pro and it's my first attempt at batch capture, so I'm pretty disappointed that it's such a waste of time.
    Thanks, smart people!

    Great, now you made Studio go and have some fun on the weekend.
    X is right eliminate things one at a time.
    You didn't let us know what drive you are capturing to.
    If capturing from the camera doesn't work, it may be that you are experiencing the "multiple FW devices on one FW bus issue" in which case you might try looping the camera or deck through the drive, works for some, but more likely you will need to install another FW bus via the card slot on the laptop.
    By the way, this really doesn't sound like a drop/non drop issue, but look at the timecode display of the footage on tape. If the last 2 numbers are preceded by a semicolon,,, it's drop frame.
    Now, I believe someone mentioned the US Open!
    rh

  • Batch Capture : Timecode Error?

    So I am attempting to capture my first video onto FCP from my Canon XL. I have about 5 minutes of video and I have logged the info for each clip. They are all in my "Bin 1" and it is set as a "logging bin." The first logged clip that i want it to capture i have marked the "In Point" at 00:00:00;00 and the "Out Point" at around 00:01:09;24. The rest of my 11 clips just go in order (i.e. 2nd clip: In = 00:01:09;25 etc...). After doing all of this I click on "Batch" under the "Capture" option, a big black screen pops up over my FCP with the capture info underneath the black screen in a gray strip. My camera then rewinds to the beginning and STOPS. I then have to sit and wait for anythin to happen, my camera still saying "STOP," and then a message pops up reading the following:
    Batch Capture: Timecode Error: Unable to locate the specified timecode. You may have specified a timecode with insufficient room for a pre/post roll operation.
    I have no idea what this means and I am beginning to get impatient with capturing my video. In the Log and Capture window, the tab that says Logging, i did not mess with the "Markers." I don't know if this matters.
    Any help would be GREATLY appreciated so that I can start editing my project with this wonderful software otherwise.
    God bless,
    |-(|:^D
    `

    In standard trim, FCP needs at least 5 seconds preroll before capturing. The preroll is so the tape can get up to speed, the heads read timecode accurately and so on. You have discovered what happens when you give it no oppertunity to sort itself out.
    The simple answer for your current situation is to set your first in point 10 seconds after the start of the time code. Be sure to make sure your last clip's OUT point is 10 seconds or more before the end of time code or you can have problems at that end of the capture as well.
    The long term answer is next time let the camera run for a minute or two before you start recording anything you will want to keep. The same is true for the end of the tape - let it run for another half minute or so.
    Cheers,
    x

  • Timecode changes when batch capturing

    I am capturing betacam sp footage into FCP 5.1 on a dual G5 2.3 box, and using a Kona LSe card. Timecode is running through the 422. For the most part, things are going smoothly, but I am now running into an issue where when I batch capture my logged clips, the last 10 to 15 sec. is chopped off. I generally can just enter the time code again manually to fix the issue, but some of my clips are 8 to 10 min long (interviews), and my client is getting irritated that we are having to capture them again. I also tend to batch capture the majority of these long bites overnight for next morning's session, and they are now consistently coming in with the ends lopped off. FCP is actually changing the timecode on the clip, making me question whether or not I entered it correctly the first time. To prove that I'm not crazy, I monitored the capture on the first couple of clips, and sure enough, FCP decides that I don't need the last 15 sec of my clip, and changes the timecode accordingly during the capture.
    What's going on? Is it the Kona card or its software? Thanks.

    Well I recently had a similar problem that is really driving me crazy.
    While capturing 720p 59.94 from the D5
    In FCP when I log a clip at:
    01:20:00:00 in
    01:20:30:00 out
    After Batch Capture is complete the clip shows up in the browser as:
    01:19:55:05 in
    01:20:25:05 out
    FCP is effectively changing the logged timecode of the clip.
    In all my experience with FCP I have never encountered this issue and I am completely puzzled. I've contacted AJA and they have said that they do not know of this issue and were puzzled also. The only thing about my current configuration that is not completely right is that I am not using a Tri-Level Sync at the moment. We get ours tomorrow. AJA suggests using the Tri-Level Sync with the Kona 3 card, but would that cause a glitch of this nature? I will try again tomorrow of course and update, but does having bad 720p reference effect how FCP logs and handles TC? To my knowledge it shouldn't and makes me think that there may be some sort of FCP error occurring. There is no reason why FCP should be changing my logged clip settings. Also, I tried a test where I made the clip that came in with the bad timecode offline, and then ran a Bath Capture again, and it changes the logged timecode even further. I've tried a variety of Device Control settings playing with frame offset etc with all having the exact same numeric result (see TC above).
    Anyone who has any insight or similar experience your thoughts are greatly appreciated. Thanks for the help
    Ted - Editor, NYC

  • Batch capturing free run timecode.

    Hi,
    I have just been through and logged 3 hour tape which was recorded on free run timecode. I have just tried to batch capture it all and it isnt working because of the timecode discontinuity.
    Is their a way I can override this? Any help would be appreciated as this is a nightmare for me.
    Thanks very much,
    Simon.

    Won't recording in capture now make each timecode break it's own clip?
    Yes. As it should be. If it didn't, then the timecode would be right for the first clip, but then all the others, the timecode would be wrong.
    Or is there a way to set it up so that it makes it one clip?
    Yes...if you turn off deck control. Switch it to UNCONTROLLABLE DEVICE. But then you lose any and ALL reference to timecode, and timecode is GOLD to an editor. Why? Because if the drive with the media dies, all you need to do is recapture the footage and your edit will be rebuilt. Or, if you deleted the media and needed to recapture it at a later date, then you could. If you capture with NO reference timecode, and you lose the media....your edit is gone, and you'll have to rebuild the cut from scratch.
    But, do that if you want. Just know what the consequences might be.
    Shane

  • Logged Timecode Changes after Batch Capture

    I'm working with the Kona 3 and the Panasonic D5 (HD3700B)
    I'm having a problem with FCP changing my logged clip TC after Batch Capture in 720p 59.94. This problem only occurs in 720p mode, 1080i is just fine.
    While capturing 720p 59.94 from the D5
    In FCP when I log a clip at:
    01:20:00:00 in
    01:20:30:00 out
    After Batch Capture is complete the clip shows up in the browser as:
    01:19:55:05 in
    01:20:25:05 out
    FCP is effectively changing the logged timecode of the clip. I'm capturing with burned in TC and the Burned in TC is Frame accurate, but why is FCP changing the clip's TC?
    In all my experience with FCP I have never encountered this issue and I am completely puzzled. I've contacted AJA and they have said that they do not know of this issue and were puzzled also. I am using a Tri-Level Sync and everything seems to be getting proper reference.
    There is no reason why FCP should be changing my logged clip settings. (right?) Also, I tried a test where I made the clip that came in with the bad timecode offline, and then ran a Batch Capture again, and it changes the logged timecode even further. I've tried a variety of Device Control settings playing with frame offset etc with all having the exact same numeric result (see TC above).
    Anyone who has any insight or similar experience your thoughts are greatly appreciated. Thanks for the help
    Ted - Editor, NYC

    The BITC matches the original Logged TC (even though the logged TC changes after capture)
    Logged TC (Media Start/End in FCP)
    01:20:00:00, 01:20:30:00
    Captured TC (Media Start/End in FCP)
    01:19:25:05, 01:20:25:05
    Burned in TC Captured (Viewable on Video File)
    01:20:00:00, 01:20:00:00
    I'm very curious about what yourlooking at on the deck manual. Page 145??? I don't see a page 145. It's been my understanding that the Monitor HD-SDI does produce the 720p 59.94 signal, and that's what all my monitors and Kona say that their getting.
    Also, could you clarify your last sentence.
    *"Forgive my guessing but this deck looks like it really wants to work in 1080 and 720 is kind of there to step up from 8 bit DVCPro HD."*
    I dont think that its a 23.98 issue and our source tape is not 23.98, even still if it was, it shouldn't effect the logged TC.... but I'll try it in the morning, could'nt hurt.
    Update: A person over the phone at Apple "didn't" (did) say over the phone that upgrading to 5.1 (universal) would improve 720p capabilities.
    So the next step will be giving more money to Apple for Universal and installing the new Kona drivers released yesterday.....and then let the testing fun begin again.
    Thanks so much for your help, please let me know where to find that info in the D5 (3700B) manual. Cheers.

  • Batch Capture problems - can't read timecode

    I want to log all my clips before capture and then just batch capture it all. Problem is, I get a message that the timecode can't be found.
    How can I correct this problem?

    I forgot nothing. My list is what is required to begin to log and batch capture. He didn't say it "started to capture but aborted midway through the first clip". He couldn't get started. We could go into a long list of tape based "do's and don'ts" but it didn't seem appropriate until we had some basic information.
    We still don't know if the material was originally recorded on the playback cam and/or if he has ever successfully captured using this cam.
    Don't you like playing 20 questions too? lol.
    x

  • Batch capturing entire tape...recomended???

    Is it a good idea to attempt to batch capture a tape in its entirety? I am having problems doing this...I do a lot of events that last often over 2 hours. Instead of capturing footage in clips, I just capture the entire tape. When I'm done with the project, I simply make the clips offline.
    I'm in the process of reviving a project now, and one tape in it's entirety(55 min approx), captured OK, but I am having problems with another tape. I am getting a broken timecode error, when I don't see how this is possible...because I let the tape freely run. Also, under the logging info, the media ends before the tape ends, which means that is space left on the end of the tape without any timecode. Yet when I batch capture, it still goes to the end of the tape.....isn't a batch capture suppose to go by the clips media in and media out points?
    All help is greatly appreciated.

    I do this often. There are two shools of thought on this method -
    Capturing entire tapes allows one to scroll through non-linearly and make subclips. The advantage to subclips is that they are serachable and you can add comments. The downside to this method is that the files are large, and you may be capturing much more metarila than you need. I often do this when working on docs with very high shooting ratios. The most recent one had 190 tapes for a 1-hour program, which led us to use offline RT for our cutting format and then recapture for online.
    Logging and capturing single clips fives you the advantage of starting out capturing only what you know you might use, you can input the logging info at the start, and will have several small clips that may be easier to manage. Since at some point you'll have to familiarize youself with the matreial anyway, you might as well do it at the logging stage.
    Several factors can contribute to perceived TC breaks - reusing tapes, camera stops, shooting format (HDV, for instance, will show a TC break each time the camera stops). If you are capturing whole tapes, you might do well to let FCP create new clips on TC breaks and just let it roll. Make sure the TC format matches between your tape and settings (DF vs. NDF)
    Regarding rolling off the end of the tape during capture, you might be very close to the end with the clip you are capturing. You might try lowering the post-roll value in the device control preset in your A/V settings.
    Hope this helps -
    Max Average

  • Batch capturing tapes Wowsa what a Hose!  Please Help...

    Hi all, i have a bunch of tapes I did not shoot. Yesterday I was on a mbp with latest FCP and a Sony DV Cam. Long story short, the MBP burned up and the Sony had to leave for a shoot. So today I have the same tape with a new Imac and a Canon XL1s cam. The iMac was restored using Time Machine, so it's the same software. The Canon cam will record and allow me to capture just fine...but with the tape I was using yesterday, I get all kinds of broken timecode errors. I can't even recreate the a clip from yesterday, even though in the Log and Capture window I can see that the timecodes match up between what was logged on the Sony and what I want to capture today on the Canon...arg!!!! any idea on what to do?
    I tried going device control=none (or whatever) and I get "Capture encountered a problem reading the data on the source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved.
    The video looks okay but the audio is all choppy, so perhaps there is some strange thing between a sony and canon on audio? I can't get ahold of the shooter as he is out in a village somewhere shooting, but he told me he shot the tape in PAL SD 16bit audio, and what was captured on the Sony the other confirms that. I think. Very confused and stressed out now...first a blown PC, now this. Thanks!
    It seems when I try and log a clip, say 30 seconds, and go to batch capture it, FCP is stopping a lot and saying [locating timecode break (press 'esc' to stop]. FCP pauses here for some amount of painful time, then continues with the capture. And is captureing random bits it seems. If I turn off device control, I get Capture encountered a problem reading the data on the source tape.
    I was using a Sony the other day and the same tape was capturing fine. Now I have another machine and another camera, a Canon XL1s, so I am not sure what's up. Can anyone help me diagnose this problem?
    If I record a bit of film on the Canon and capture that all is fine. I don't have access to the Sony anymore, so what to do?
    The timecodes look consistent

    You should try this on the Final Cut Pro forum.
    Are you sure it's a PAL camera?
    "The iMac was restored using Time Machine, so it's the same software."
    You can't install pro apps like this. It will always causes problems. You must install the software properly on a correctly installed OS. Restoring will not provide a correct OS installation for pro apps.

Maybe you are looking for