Failed batch send to compressor

Hi guys
I'm trying to export a huge amount of footage from FC to Compressor (FC6.06) for a client review. My project disks, in FC and all my destinations on Compressor are set to the external disk. Yet when I run the batch I get a start up disk almost full message from the finder. I have 2 free gigs on the startup dick (I know! I know!), but why would my start up disk be used? Is there a setting for the FC cache, and does that get used when sending to compressor?

But is the OS writing files when FC exports to Compressor?
Constantly.
You can move FCS media content to an external drive: Copy the top level folder to where you want it, then point the application at the new location. Delete the original.
Let's remove some stuff you don't need by installing more!
Download [Monolingual|http://monolingual.sourceforge.net> and remove all the foreign language packs from your applications -most come with a variety of localization files in languages that you neither speak nor read. If you never use iTunes with Latvian menues, it can go. (Apologies if you are in fact Latvian -but you get the idea). If your Mac OS runs in a language other than English, you must still keep it. This will save around 2.5 GB on a standard Mac OS X installation.
Download [Applejack|http://applejack.sourceforge.net> and clear out system and user cache files. Applejack is also an excellent maintenance utility. Read the instructions carefully.
How many printers do you have? Mac OS X installs over a gigabyte of printer drivers from various manufacturers. Get rid of them and install drivers for the device you actually use.
Read Me files, License.txt and other documentation. You already read them, you don't need those items any more. Off to the trash.

Similar Messages

  • Failed to send batch after max errors - Snapshot

    I have been replicating happily between 2008 R2 SQL Servers for some time using Transactional replication.
    Replication stopped yesterday with the following messages on the source server:
    MSSQL_ENG 10054
    Communication link failure
    MSSQL_ENG 10054
    TCP Provider: An existing connection was forcibly closed by the remote host.
    MSSQL_ENG Failed to send batch after max errors
    MSSQL_ENG Unspecified error
    MSSQL_ENG An existing connection was forcibly closed by the remote host.
    MSSQL_REPL 0
    The process could not bulk copy into table '"pro"."ZZM012X"'.
    In the Event Viewer on the target server this message appears:
    "A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 10054, output error: 0)."
    So this happened after it had been replicating for some time.  I get the same error now when I try to restart it or if I rebuild the publication/subscription completely.
    There are 7 tables in the publication - 6 of them bulk copy and then replicate without issue.  The error is specific to one table.  The table has a column in that is varchar(132) and it contains recipe instructions to our manufacturing plant.  If
    I replicate the table and exclude this field, it doesn't fail.  I initially thought it might be spurious characters in the text column but I have removed these and still get the same error.  I have set up a test version of the table and publication/subscription
    to enable me to test outside of the live environment.  Same errors occur.
    Does anyone have any clues or pointers to what might be causing it?
    Many thanks
    Les

    Hi - Thanks for the response.
    I have tried numerous tests to try to pinpoint the issue but I am still unable to resolve it.  The source server is in Connecticut and the target is in the UK.  I have successfully bulk copied and replicated the problem table from the source server
    to a new database on the same server.  I get the same error if I bulk copy and replicate to another server here in the UK.  I have backed up and restored the table in a new database on one of the UK servers and can bulk copy and replicate here to
    a second UK server.  I have traced the issue to one column, varchar (132) on the problem table.  If I exclude the column the table will bulk copy and replicate US to UK.  I have created new tables and inserted a subset of the data - no change.
    We have looked at network issues also:  We have switched off the TCP Global Parameters like Chimney offload and NETDMA - on the adapter and in the OS - as these are reported as a potential problems.  We have looked at settings in SonicWall and
    tried disabling Intrusion Prevention Service, Anti Virus, Application Control and Anti Spyware.  Our next option is to look at MTU packet size to see if that is a possible cause.
    We are stumped on this one and have had to exclude the table completely from our manufacturing software which is not ideal but at least keeps us working.
    Any further ideas, suggestions or solutions would be gratefully received.

  • Send to Compressor stopped opening a new batch window

    Hello. I am a professional video editor with 22 years of experience, and have been a registered Final Cut Pro user since version 1.
    I just finished exporting 14 segments of a documentary using SHARE: SEND TO COMPRESSOR from Final Cut Pro X. Everything worked as expected until I made some changes to a project, then used SHARE: SEND TO COMPRESSOR again. For reasons unknown to me Compressor 4 has stopped opening a new batch window when I send a job to it. It THINKS there is a batch open, because it asks me if I wish to save or discard my changes before closing.
    Any ideas?
    OS X Lion, Final Cut Pro X, Compressor 4 are all the most recent upgrades running on iMac Quad Core i5 with 8GB RAM.
    Regards,
    H.
    Astounding Pictures

    Helo, and thanks Russ. I neglected to mention I was moving forward without Compressor by using SHARE: EXPORT MEDIA. I thought I'd put it out there to see if anybody else had encountered this bevavior. Teething problems are to be expected, though. The beta releases of OS X come to mind. However, I wouldn't trade these new editions for anything except future updates and releases. As a fellow who has had the fortune to work with film, analog video, and linear editing systems, I welcome the radical shift in focus from the older, tedious workflows to something more suited for a data-based age. Mind you, it took about six months to get enough courage to take the plunge, but I'm glad I did.
    Sincerely,
    H.
    Astounding Pictures

  • Failed to send my project in final cut pro to compressor

    I tried to send my project in final cut pro to compressor but when I go to file then see send to compressor it will not let me click on "send to compressor". I checked but none of my files are missing or anything and the project is only 4 minutes long. This has happened to me once before and it completely crashed my computer. I had to start out fresh which was a horrible process. CAN SOMEBODY PLEASE HELP?! (URGENT)What might I have done wrong that this happens? In the picture below, this happens and I have no idea why that is.

    I suspect it's a FCP X issue rather than a Compressor issue.
    Will FCP export a master file? Make a short section with the range tool and find out.
    Tri reseting the zoo's preferences. Hold down the option and command keys when you launch to reset.
    Russ

  • Batch Monitor and Compressor do nothing when I submit...

    Hey, guys,
    I've re-install the whole OS and Final Cut Studio 2,
    I use Compressor to encode my video clip,
    after setup the format and the destination,
    I click the "submit" Button, the batch job send to Batch Monitor,
    but Compressor and Batch Monitor do nothing, the status bar didn't run.
    Compressor's CPU usage is only about 0.x %.
    Any body have the same problem?
    How to solve this problem?

    hi Thomas!
    I have norton 2005 and turned it off when I downloaded itunes and I get the same result. quicktime will open for me however.
    NIS 2005 is the usual suspect with "symptomless launch suppression".
    first try:
    b noir, "itunes wont open" #6, 02:11pm Oct 3, 2005 CDT
    ... but if no joy with that, try:
    Lorraine M, "NIS/i-tunes problem rectified" #2, 01:51am Oct 17, 2005 CDT
    keep us posted.
    love, b

  • Help! I am getting: Quicktime error -50...when trying to use the "Share" and "Send to Compressor" function. I need to export my show! Thanks for your suggestions! (using FCP7)

    Help!  I am trying to export my show and commercials from the timeline. Both Share and Send to compressor are not working.
    Its starts compressing then I get Failed"Quicktime Error -50". I appreciate any suggestions.
    SYSTEM INFO
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          12 MB
      Memory:          10 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP51.007F.B00
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11

    First try exporting a self-contained movie from FCP, the using the resulting file in Compressor.  To do it, go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  In the export window, check the self-contained option but do not "recompress all frames."
    Once the export is finished, launch Compressor then use the self-contained file as the source.  If that fails, you may want to try using theis: http://www.digitalrebellion.com/compressorrepair/
    -DH

  • FCP 10.1 Crashes when sending to Compressor

    Since automatically upgrading to FCP 10.1, I can't send any jobs to Compressor (4.1).  When I do File>Send To Compressor, FCP, just crashes.  Also, if I just try to open Compressor on its own, it crashes and fails to open. 
    Please help!
    Thanks,
    Mark

    I thought I wes being pretty precice when I said:
    Since automatically upgrading to FCP 10.1, I can't send any jobs to Compressor (4.1).  When I do File>Send To Compressor, FCP, just crashes.  Also, if I just try to open Compressor on its own, it crashes and fails to open.

  • Adobe Creative Cloud connectivity issue on Websense run network; Failed to send the request to server to get the response - 12002

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

  • IPhone 4s recorded voice memos failing to send and locking memo app.

    I am using an iPhone 4s 16gb with the latest ios. When I record a voice memo, and then try to send it via iMessage it often fails to send.  It does not provide any error messages but what will happen is, I will push the "send" button and the phone will sit there doing nothing for a second then the memo will disappear having not actually send anything. This causes me to have to reboot the phone or I can not send recorded memo's via any message format. (ie text, imessage, email) Is this a known issue? Is there a fix?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • Fatal Error Acrobat failed to send a DDE command

    Hello all.  I have a fillable form I developed using word 2010.  I am trying to convert it to a PDF form.  I open acrobat and select star from wizard from the Forms menu.  I browse to find the word document and open it.  I save the PDF document and everything looks good.  I get a progress bar that says "Please wait, reading Adobe PDF".  This is very slow progress and then I get the Fatal Error message "Acrobat Failed to send a DDE command".  I click ok and the progress bar continues still very slowly.  I get the same message again.  I click ok and the progress bar continues.  The progress bar gets to the end and just stays there.  Nothing happens.  I waited for an hour and then cancelled it. When clicked cancel, the PDF document opens with my form but without any fillable fields or drop down menus.  I tried to do it again a few times and I get the same error message.   I am using Adobe Acrobat 9 pro version 9.4.2.  Thank you in advance for your help.
    Gonzalo
     

    AA 9 will not work for anything but the print function from WORD 2010. The only version of Acrobat that is compatible with OFFICE 2010 for PDF Maker is AA X. Thus, open WORD and print to the Adobe PDF printer. Then open the pdf in Acrobat. Go to FORMS>Add or Edit fields. Since you have no fields at present, Acrobat will ask if you would like to detect form fields. Answer yes and you will get a first cut at the form fields. Yes, you will likely have to add some more and change the ones that Acrobat estimates, but you are on your way.
    The other two options you have is to go back to WORD 2007 or earlier or upgrade to AA X (or find someone with AA X and WORD 2010). These methods are pretty much your options with the software combination that you have.

  • MailServiceHelper Failed while sending email java.lang.NullPointerException

    Hi guys,
    I am trying to send email with Adobe CQ API.
    But i am getting a nullpointer exception at this line:  MsgGateway.send(htmlEmail);    
    This is my method that i am using to send.
    import com.day.cq.mailer.MessageGateway;
    import com.day.cq.mailer.MessageGatewayService;
    import javax.mail.internet.InternetAddress;
       public boolean sendHtmlEmail(SlingHttpServletRequest sling,
                String fromMailAdress, List<String> recepientmailAddress,
                String emailSubject, String htmlbodyMail) {
            HtmlEmail htmlEmail = new HtmlEmail();
            List<InternetAddress> emailAddress = new ArrayList<InternetAddress>();
            try {
                for (String recipient : recepientmailAddress) {
                    if (!StringUtil.isEmpty(recipient)) {
                        emailAddress.add(new InternetAddress(recipient));
                        log.error(recipient);
                if (!StringUtil.isEmpty(fromMailAdress)) {
                    htmlEmail.setFrom(fromMailAdress);
                htmlEmail.setTo(emailAddress);
                htmlEmail.setSubject(emailSubject);
                htmlEmail.setHtmlMsg(htmlbodyMail);
                htmlEmail.setCharset("utf-8");
                MessageGatewayService MsgService = getMessageGateWayService(sling);
                MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
                MsgGateway.send(htmlEmail);   //nullpointer exception caught here        
                return true;
            } catch (Exception e) {
                log.error("Failed while sending email", e);
            return false;
    I have checked to ensure the bundle com.day.cq.cq-mail and my own bundle is running .
    I am also sure that 'htmlEmail' is not null by retrieving the email subject via .getSubject and it did return me the subject.
    I do not understand what is returning the nullpointerexception.
    Thanks in advance !

    The MessageGateway instance (MessageGateway<HtmlEmail> MsgGateway) is null therby throwing a null pointer.
    Instead of instanciating msgGateway as :
    MessageGatewayService MsgService = getMessageGateWayService(sling);
    MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
    Inject your MessageGateway as:
    @Reference
    private MessageGateway<HtmlEmail> msgGateway;
    and then call send on msgGateway as msgGateway.send(htmlEmail)
    ~ Aditya

  • All of a sudden I can't send or receive messages on iPad. Iphone is working fine. It gives me "message failed to send" and is green instead of blue. The only thing I have done differently is turn iCloud on in my iPhone.

    cant receive or send messages on my iPad. Keep getting "message failed to send" and it is green instead of blue. This happened after I turned on iCloud on my iPhone. Would that have anything to do with this problem? It's like its not sincing to my phone but I can send & receive emails ok.

    iOS 7.1.2, huh? It MAY be having some trouble with the iOS 8.x devices and latest iCloud features. Although it meets the minimum system requirements, it does not meet the recommended ones - System requirements for iCloud - Apple Support
    You should try Restart or reset your iPhone, iPad, or iPod touch - Apple Support - this is generally the first step in troubleshooting, all devices - for all time
    Message Colors
    Blue is iMessage (Apple service)
    Green is SMS (Carrier service)
    What happens when you use your iPad similarly? (what iPad model & iOS version)
    As a last resort*, Use iTunes to restore your iOS device to factory settings - Apple Support - *this document tells that all your data will be lost but provides steps to back-up (Before section) then restore your data (Restore section #4)

  • Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

    rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
    Does anyone know how to fix this?

    What EXACT version of Photoshop CS4 are you running?  You should be on Photoshop CS4 v 11.0.2.
    Also run Apple's software update to see whether it offers you the latest Epson update:
    Printer Driver v9.33
    Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
    MOST IMPORTANTLY:  have Photoshop re-create its own Preferences:
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
    Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
    Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
    NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
    How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If  you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • OAS 4.0.8 fail to send complete HTML from PL/SQL sp

    OAS 4.0.8 may fail to send complete HTML response from the PL/SQL cartridge sometimes. It also varies with different browsers or even with different versions of the same browser. Sometimes it works OK, sometimes the HTML was broken. I tried to figure out the reason, but only realized that the proxy server might cause the problem. As I disabled the proxy server setting on my browser at school(the server is on campus), it worked. However, as I did the same thing at home, it did not work. I am confused what the problem is. That trouble never happened for the previous version OAS 3.0.1. Anybody can help me with that. The ORACLE staff in Taiwan did not come out with the solutions!

    OAS 4.0.8 may fail to send complete HTML response from the PL/SQL cartridge sometimes. It also varies with different browsers or even with different versions of the same browser. Sometimes it works OK, sometimes the HTML was broken. I tried to figure out the reason, but only realized that the proxy server might cause the problem. As I disabled the proxy server setting on my browser at school(the server is on campus), it worked. However, as I did the same thing at home, it did not work. I am confused what the problem is. That trouble never happened for the previous version OAS 3.0.1. Anybody can help me with that. The ORACLE staff in Taiwan did not come out with the solutions!

  • Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to

    Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!

    Did this ever get resolved, as I am having the same issue.  Trying to learn LR5 AFTER a decade using Aperture.   I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message.   Using latest version of Mac OS X.

Maybe you are looking for