Failed cfg on Essbase /Essbase administration service and Essbase / Studio

Hi Friends,
I Installed Oracle Hyperion Foundaion services,esbase and planning.
i deployed essbase in standalone mode.
when i run EPM system Diagnostic I am geting failes status on
Essbase /Essbase administration service and Essbase / Studio with the Test Description
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks
is there any problem because of this?please suggest
Regards
DB

Hi,
Have you configured Essbase, Shared services and Planning component after installation; were it successful last time.
Thanks
Focusthread Hyperion Trainer
[http://focusthread.com/training]

Similar Messages

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Shared Services and Essbase Server Access Question

Hi,
It seems that we have to assign Essbase Server access at the individual username level and that groups don't work when it comes to Essbase Server Access. Is this correct or are we doing something wrong and groups do work with Essbase Server access? We are on 11.1.1.3 Essbase/Planning/Shared Services.
Thanks

You can provision Essbase Server Access via groups but it must be the very first thing provisioned and pushed to Essbase. Then after that, provision your groups with other accesses such as Planning, Reports etc....

Shared Services and Essbase

Hello All,
Pretty much an undesired Bug, Basically there is an ID listed as an Essbase admin which yes it was few months back. At present that ID has been removed from Shared Services , also I checked in the list of Essbase Users within EAS and did not find the ID.
Interesting thing ***** When I exported the Essbase security file I could see that ID listed as an Admin , not sure how it comes up only in Security file but not any where else.
Is there any issue between Essbase and Shared services communication, because the Essbase should refresh Manually for any changes in the Shared Services.
Any comments Friends ?
Thanks !!

Its probably worth having a read of the following docs in Oracle Support as they should give an idea
Deleting a User/Group from Shared Services Does Not Delete it from the Essbase Security File [ID 1388447.1]
How to Delete a User from the 11.1.2.x Essbase.sec File [ID 1396890.1]
Cheers
John
http://john-goodwin.blogspot.com/

Shared services and Essbase Sync issue

Hi,
Today morning all of sudden lot of users raised an issue that they can't see few applications while connecting through Smart view. I have checked Shared services and the groups are already provisoned. Finally I ran alter system resync sss and after the syncing its fine.
Any reasons why this morning Syncing was not there.
Thanks..

Its fascinating, if the users are provisioned too they can see other applications in smart view and that's what I heard but never checked on it, Is there any possible filters where they cant see it ?
If so please let me know.

Regarding Shared Services and Essbase Access

Hello,
I am curious on few things regarding how Essbase and Shared services are interlinked.
Basically we have created Essbase Filters to limit the User access to specific entities , my concern is if a User is trying to Run a report or retrieve through Smart View and if they don't have access to any one of the list of Filter definitions say if there are X , Y ,Z entities in the Spread sheet for Smart View retrieval or in a report and the user does not have privilege for Z do they still get terminated from the entire Essbase Applications. I encountered similar type of problem with one of the users today.
Any comments.
Thanks !

Thanks for the reply Glenn , yes it should not get disconnected or have any connection issue. But below is what the error we get when using Essbase security filter.
**** Cannot Open Member Selection. Essbase Error(1001064):You do not have sufficient access to perform read on this database ****

Clarification regarding Shared services and essbase security

Hi,
Sorry for the silly doubt. We have shared services to manage security, essbase v 9
1. to assign calc access for users, do i assign calc scripts under databases in group security and assign users to groups in shared services or do it via access control in shared services?
2. If in shared services i havent given calc access but in eas user belongs to a group with that particular calc script access, which would take precedence?
Regards,
N shah

In shared services, when i click on a particular application under the essbase server under the projects folder, there are cases where there are no users or groups under the 'available users and groups'. Why is this so? groups and users are supposed to be there.
Also, in a different application, i saw one available user. however when i try to provide calc access. its not changing anything. I select the calc script and then click the check mark. however nothing changes. The calc access for the user is specified as none. When i login to excel with the same user id, i can see all the calc scripts available for the user. Where are the details being picked up from.??
Edited by: 862089 on Jul 13, 2011 9:55 PM

Essbase, APS, Shared Services and MicroStrategy

I'm trying to connect up my MicroStrategy front end to an Essbase application. It seems that I can talk to the XMLA Provider services but when I try to get information about a specific application I get an error. I have gone in to the essbase.properties and added the following:
webservice.guest.name=Admin
webservice.guest.password=password
and changed system.log.trace.enable=true to system.log.trace.enable=false
When in EAS console I can see the authenticating Essbase server and have added and can open the Hyperion Provider Server. However, I'm just not connecting to the application.
First, can someone tell me what logs I can look at?
Second, has anyone connected to MicroStrategy through XMLA before?
I know I'm green but I don't have anywhere to turn right now.
Thanks,
Dan

When we did this we stumbled across something that was causing an issue and couldn't believe that's what it was. The path we were using for the XMLA provider is case sensitive. I forget the exact path we had, but I believe it was the last part of it had to be in all caps.
BTW - for what it's worth, we were pretty disappointed when we finally got it up and running. We had been told they had full functionality with Essbase using the MDX provider. We assumed since they were using MDX that it would be good, we were very wrong. They basically use very simplistic MDX to bring data sets back into MicroStrategy where they render the data in a relational format to make it fit into their existing platform. I was very disappointed at how they watered down the MDX. They said they would look to improve it in future releases, but I don't think it is a big focus for them.

Intergration Services and Essbase SQL-Interface

Hi, Experts,
I have learned that if I need to access relational database I need to have one of the above components.
Well, as SQL-Interface is free, what is an Intergration Services good for?
Please give me some advices.
Thanks.
Regards,
Linda

Both SQL Interface and Analytic Integration services provide direct link to the RDBMS.
In AIS, We have to create OLAP Model(Logical Star Schema) and MetaOutline(Rules to load memebers and data) based on the OLAP Model.

How to launch Web administration service and set trace level for web dispac

Experts,
Can some one help on how to setup trace level for Web dispatcher? and how to launch web administration interface.
Thanks in advance.

Hi Sam,
You can launch the Web Dispatcher Interface through the follwing link:
http://host:port/sap/wdisp/admin
The Username & Password are created when the profile is run for the first time. The userid is ICMADM
This link points to the web disaptcher administration interface & its usage.
You can set the trace level once you login to the interface.
http://help.sap.com/saphelp_nw70/helpdata/en/4f/3bee29d9764e988bdeecdb4d484722/frameset.htm
Hope it is helpful.
Regards,
Abhishek

DB Deployment failed for Essbase Administration Service 9.3.1

Hi All,
I can not finish the database configuration for my essbase administration service 9.3.1 successfully. I can see that the config tool created some tables and data in my oracle database, but the final state was failure. The configuration utility displayed the following information:
PRODUCT: Essbase Administration Services
(/app/essbase/AnalyticAdministrationServices)
----- DB Deployment: Failed
(Refer to log file for details: /app/essbase/logs/config/configtools.log).
And here are the error messages at the end of the configtools.log file:
(Oct 21, 2010, 01:12:22 AM), com.hyperion.hbr.common.HBRLogger, DEBUG, Entering method. com.hyperion.hbr.db.DBAdminManager:saveConfig
(Oct 21, 2010, 01:12:22 AM), com.hyperion.hbr.common.HBRLogger, FATAL, Configuration save failed.
(Oct 21, 2010, 01:12:22 AM), com.hyperion.hbr.common.HBRLogger, FATAL,
com.hyperion.hbr.common.HBRLogger$HBRLogThrowable
     at com.hyperion.hbr.db.DBAdminManager.saveConfig(Unknown Source)
     at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:222)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Oct 21, 2010, 01:12:22 AM), com.hyperion.hbr.common.HBRLogger, DEBUG, Exiting method. com.hyperion.hbr.common.HBRLogger:severeStackExit
(Oct 21, 2010, 01:12:22 AM), com.hyperion.ess.EASDBConfigurator, DEBUG, Error Code: CORE162
Error Args: null
ClassName: com.hyperion.hbr.excp.CoreException
Error Code: UTIL010
Error Args: [Ljava.lang.Object;@150388c
ClassName: com.hyperion.hbr.excp.ResourceException
Exception /app/essbase/AnalyticAdministrationServices/HBRServer.properties (No such file or directory)
ClassName: java.io.FileNotFoundException
(Oct 21, 2010, 01:12:22 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)

I'm not sure about that. Yes I can not find RHE5 in the supported OS list. RHE4 is in the list though. So do you think this could be the reason?
I really got a lot of problems. Although I can connect to the administration service using the console now, and can create essbase servers, but I can not even connect to the server. It hangs.
Shall I change my OS to RHE4?

Shared services security and essbase security

recently upgraded to sys 9 and now use shared services 931
we used to have security at essbase level previously and now its all Shared services..
now i have so many concerns
Can we automate the security just like I used to automate in essbase earlier...
or can we automate secuirty in essbase and them sync it to Shared services??
I know that we change security settings in SS and then sync it to essbase but is the other way around possible???
IF yes HOW?
IF NOT - can we automate SS security which reflects to essbase...
I have to go through the prod doc and I'll do that very soon but any suggestion on this would really help me out..
Thanks in advance

Hi,
can you please write more about which products and version are you using and on which operating system name and version.
Why do you use Shared Services? Are you using only Essbase server or any other server? If you use only Essbase server there is probably no need of using Shared Services.
If you need only Essbase you can see my info about installing Essbase without Shared Services: hyperion essbase installation
Please provide more info, so that we on forum can help you.
Regards,
Grofaty

'could not connect to administration server" in essbase console

Hello friends,
while i was trying to login to eas console iam getting this error message as "could not connect to administration server" even after restarting the services.
Thanks in Advance..

Rakesh,
Is this the first time you are trying to log on to EAS console ?
First check if your database is up or not ( with which essbase configuration is done).
If your db services are running, then Go to Oracle EPM system, EAS and Start Administration Services from Start Programs ( I assume you are on 11 and on Windows).
If still you get the same problem, then check the logs.
@Prabhas,
To my knowledge and based on Essbase architecture, both EAS and Essbase services are different. If Essbase is up and EAS is down, still you can access Essbase through add-in or some other tools.

Is there way 2 give users VIEW only in Adm Services Console(essbase)?

Hi,
Currently we have ADMIN user logging into "Administration Services Console" (essbase) and we would like to give access to a super user access to this as well so he can view the calcs. Is there a way to give that person VIEW only access?
jang

galen2 wrote:
am i missing something obvious, or is this not available in audition ?
No, that view (that I've always found rather annoying, myself) isn't available. But zooming in and out in Edit View is easily and rapidly achieved by more than one method, and once you've got used to it you'll not particularly want to go back, I suspect. Audition isn't a clone of Wavelab, and Adobe deliberately don't implement features in the same way as in other software unless there is absolutely no choice in the matter - which is rare.
Incidentally, most people in your situations find replies like this quite annoying. Please don't take it personally - that's just the way it is with software; you get used to the way it works, or if you don't like it then get something else that does it for you. There is no universal paradigm for how an audio editor 'ought to' work, and neither should there be. But in this regard, I have to say that an awful lot of editors all over the world having to work fast in radio stations use Audition as the tool of choice - simply because editing on it is extremely intuitive and quick, without resorting to confusing multi-screen views.

AAS & Provider services and conflict between exl adin & smart view

Hi,
I just installed Hyperion Essbase 9.3.1 for test purpose for our upgrade from 7.0 to 9.3. I have one machine and I installed Administration console, Hyperion Provider services and Essbase.
I need to install administration console and Hyperion provider services as a service on windows environment. How I can install as a service.
If I work excel add in v 7.1 and smart view 9.3 on a same machine. It will give me any error or conflict?
Thank you.
T.Khan

Hi,
I am not sure that fully understand what you are asking so I apologise if I have misread this.
Are you saying you have installed EAS server and APS on a machine but didn't tick the install as a service when you were configuring ?
If that is the case then if you have installed using tomcat, in the directory :- \Hyperion\deployments\Tomcat5\bin
There are scripts to create services :- installServiceaas.bat & installServiceaps.bat
If excel addin 7.1 and smart view do cause any issues you can easy turn one of them off, for instance with Smart View you can go to the tool bar in Excel > Hyperion > About > Untick enable Add-in
Or just untick the addins from the addins menu options in excel.
Cheers
John
http://john-goodwin.blogspot.com/

Failed cfg on Essbase /Essbase administration service and Essbase / Studio

Similar Messages

Maybe you are looking for