Failed checksum when downloading iMovie update from Apple support
I have been trying multiple times to download the iMovie 9.0.6 update, but on each and every occasion I get the errormessage "failed checksum" when trying to install it. What should I do?
I have a Macbook pro unibody 13 mid 2010, I made the firmware update too, the day after I had suddenly my computer freezing when I was watching videos on youtube. I tried to restart it, and it was stucked to a white screen. I tried all the possible solutions, : SMC reset multiple times, NVRAM/PRAM reset multiple times.
I tried to reinstall the system from the dvd, and from a USB key : Impossible to install it as no hd was showing up in the list of availaible drives. I tried the online restoration. Tried with another hd with lion on it. The only thing that worked was to launch the system from an external usb drive, when it was launched, the wifi and bluetooth cards were not working (no cards).
I tried to launch the same hd with lion on it on another macbook (no firmware updates made on this macbook), and the wifi and the bluetooth was working fine on it.
I really do believe that this update has something to do with my problems, and expect from Apple to fix them
Similar Messages
-
I've tried and tried several times to Connect my device to my PC and follow the onscreen instructions in iTunes to download the update from Apple. Problem is iTunes doesn't connect to my iPad so that I can update to iOS 5. I don't see the iPad icon when iTunes loads. I have looked in my computer and see the iPad is recognized. Any one else having this problem? This is also happening with my iPod
Thank you, RipleyI haven't updated yet. Apple's download servers have been too busy. Did you know you can update via wifi instead of connection to your computer?
Here's a description of the update. Not a lot of changes for iPad 1/2.
iOS 5.1 Software Update
http://support.apple.com/kb/DL1504
You can wait a while & update at your convenience.
Cheers, Tom -
How do I put my iPhone stored items into my iCloud storage?i have bought an upgrade but none of my phones stored items have moved to iCloud.i can't download new update from apple. due to not enough and yet iCloud space is empty??please help I don't know what I doing all I know is my phone is iPhone 4 and I can't update it. My phone on contract with t-mobile . Thanks
You can't have content in iCloud without having it on your phone, you will need to look at deleting items from your device that you don't need. Movies and TV shows from iTunes are possibly a good start because they tend to be large and can be redownloaded at a later date.
-
I bought a MacBook Pro last year. I have a redeem code for Os X Lion 10.7. I had to erase all my data on HD. Now i cant update to Lion 10.7 and there is no way a i can download the update from apple unless i pay... AGAIN????
Exactly which Mac OS X version is currently intalled?
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
If you see v10.7 you can use Lion Recovery to reinstall OS X. -
when downloading an update from app store, password is requested from a different user. How to change user?
Unfortunately there's no way around this. you will need that password to update the apps. If he won't give it to you, then i'm not sure what to say.
You should have kept the account with the Apps you bought yourself.
Otherwise, as I said, delete the Apps, and buy them again.
Sorry. -
Is it safe to download latest update from Apple to my iphone 4
The reason I ask, is that I amd many people had a problem with an software upgrade for the 3S and I have heard that similar problems have followed after downloading the latest update. Is it safe to download the latest version or will it slow my phone and cause battery life problems that I have heard so much about?
You only read about the problems here, because people who don't have problems don't usually post. Also, if you go back in time you will see that there are problem reports after every update for the past 5 years; if you take them seriously your phone would still be on iOS version 2.1.
A few people have problems after every update. And a few people have problems not associated with any update. If you update your phone will most likely work as well or better than it did before. If it doesn't you can almost always fix any issues that arise. To minimize the chance of a problem there are a few precautions you can take before updating:
Connect to a USB port directly on your computer to update if you are not updating over the air
If you are updating over the air connect the phone to power, and make sure you have a good charge level (>50%)
Reboot your computer just before updating if not over the air
Disable your antivirus just before updating if not over the air
If using your computer click the "Check for Update" button, then choose "Download Only". This way if the download fails your phone will still be usable. After the download completes click "Check for Update" again.
For both "tethered" and over the air updates do it at a time when you are unlikely to receive push email, calendar or contact updates
Kill all 3rd party apps (in the Quick Launch ribbon) that use Notifications just before updating
Except for the first 2 the rest are being extra careful, and will be unnecessary in most caes. But they won't do any harm either. -
I just upgraded to ilife iphoto 09. Now when I alter images in iphoto 8.1.2 the program freezes up. I have downloaded all of the latest updates from apple, but nothing seems to correct this problem. Has anyone else experienced this?
Thanks for your reply,
LuAnn
<Email Edited by Host>To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....
I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.
-
Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"
"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpauldingI just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding -
I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine. Now i keep getting reminders to update the app and I cant get rid of it from the app store. Help.
You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test. -
I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?
I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?
-
When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.
Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690�
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime. -
TS1424 when downloading itunes update it fails because it can't find "iTunes.msi"
when downloading itunes update it fails because it can't find "iTunes.msi" whaat can I do please?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Failed to download the update from unc content source. Errcr Code=3
can anyone tell me. how to fixed this issue. When i create Automatic deployment Rule in SCCM 2012 SP1 CU2, i get the error like this...i try to search in google. but i cant found error like this.
http://social.technet.microsoft.com/Forums/getfile/328697I'm creating Automatic Deployment Rule, in "Download Location" tab i have two options:
1. Download software updates from the Internet
2. Download software updates from a location on my network.
So i choose the second option to download it from a location on my network and write there UNC path to the primary server where are all updates downloaded. But when i start this rule error messages appiers with every update it tries to download "Failed
to download the update from UNC content source. Error = 3" -
I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements
Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot
Maybe you are looking for
-
I can't cut and paste in aperture on export
I updated to 3.4 and I'm on 10.8.2 with a 27" 2011 iMac. In the browser, I go to export all the pictures in a project. When the finder window pops up, I create a new folder and it is highlighted for changing the name of the 'Untitled' folder. I try
-
Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?
-
We have installed the OSM server on Solaris Sparc server with 10.3.1 Weblogic server. The Eclipse is installed on the Windows machine which has 10.3.3 weblogic. Will building the cartrdiges with 10.3.3 weblogic lib files and deploying them on to a se
-
Hooking up esata drives to an Xserve
Hello! Newbie here. We have an Xserve 2x2.8Ghz Quad core Intel with 2 gigs of Ram. I need to hook up external Esata drives to copy files on and off the Xserve and the raid. There are firewire connectors but no Esata connectors so I guess I have to bu
-
When I moved to OSX 10.8.5 my ability to open the finder on a blank desktop. Can anyone help?