-- Failed consistency check for this level
Hi guys,
I'm trying to validate a hierarchy, however, 1 level fails with that error message:
Level Name --> Failed consistency check for this level
I checked the column on physical layer - it has the same name and same datatype as the one in DB. The nullable flag is checked (there're no null values anyway). At the logical level - the key is created and it's the only level key at this level.
What could be a cause?
Thanks
Thomas,
since you've seen this before....did you have a problem doing "Estimate Levels" when you had measures in the hierarchy (usually they get there when you select a level for measure in its settings). I suspect the problem is in the measure - using FILTER function which references the dimension.
Thanks
Similar Messages
-
" -- Failed consistency check for this level" when doing Estimate Levels
Hello again,
When you run "Estimate Levels" and you get "<-- Failed consistency check for this level"
What does it really mean? Can this break, because of NULL values in logical keys? Or perhaps anything else? Thanks
ThanksThomas,
since you've seen this before....did you have a problem doing "Estimate Levels" when you had measures in the hierarchy (usually they get there when you select a level for measure in its settings). I suspect the problem is in the measure - using FILTER function which references the dimension.
Thanks -
I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
here in Koolewong.
richard.Uninstall Intego...you don't need it.
-
How to deactivate consistency check for ODS?
Does anyone know if it is possible to deactivate the consistency check for an ODS?
Here is why you would want to do that -
In the ODS I am getting the following error: "InfoObject 0FISCYEAR was deleted for DataStore object ZOFIGL_6. This is not allowed as DataStore object ZOFIGL_6 contains data"
You can resolve this issue in a couple of ways -
The first being delete the data from ODS and reactivate the ODS (I would not like to take this approach as I do not want to delete the production data)
The second approach would be to send in a transport to correct this error but the transport will fail owing to the consistency check it does on the ODS when the transport is moved across. I could deactivate the consistency check, move the transport across and then everything should be okay.
NOTE: As a side not this is the production box and it is set to be non-modifiable which means that I cannot make any changes in the system. -
When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software. -
Hi All,
I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
Could anyone help me out on how to resolve this? I do not know where to begin even.
Thanks!!
Cheers!Hi Eugene,
Thanks for the reply.
I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
I would assume the problem is with that file, as no other clients are having any issue like this.
Have you come across this error message? Do you know what sort of scenario could be responsible for it?
Or would I have to file it under "random problems generated by network PSTs"? :P
Cheers! -
Windows Update failed to check for updates with error 0x800B0001
Hi all,
I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
Windows Update failed to check for updates with error 0x800B0001
Note: I cannot see the Win2K12 server in the WSUS console under computers node.I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
http://tplive.azurewebsites.net/2013/12/windows-update-error/
You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
not recognize that the installation of the update was not successful.
The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
properly and completely patched.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
The problem..
Software Update message "Failed to check for updates. The operation couldn’t be completed. Operation not permitted"
MacBookPro 10.74 Lion Computer is online, as you can see by this message.
Anyone know what is going on?Most likely needs to be run under an admin account. What's yours?
-
Failed to check for new preview build, please try again later. 0x80248014
Hi
I keep getting error such as "Failed to check for a new preview build, please try again later.0x80248014" and unable to update to a newer build version.
How do I download the latest version build?
Windows Updates?Hi,
To rename SoftwareDistribution folder, you can refer to the contents of th link below:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-to-fix-the-purchase-error-0x80248014-windows-8/27c65525-fa28-4048-b11d-b83e86a2dcbc
For your problem, I'd like to suggest you use Windows update troubleshoot tool for test to fix this problem:
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Windows Update
If failed, please post the detailed information of this tool diagnose results here.
After that, please upload your Windows update log file to your sharing space and post the link here.
C:\Windows\WindowsUpdate.log
Roger Lu
TechNet Community Support -
Bypass check for this program only
Hi FI Masters,
i have a zprint prog ex : ZRFFOZA_H2H. i copied this prog and given a transaction(ZRFFOZA_H2H_FI tcode : ZFI_H2H ) and run to see the results where it works fine.
but....
payment method can be linked to only one print program and in this test case payment method M is linked to ZRFFOZA_H2H, so now the problem is that the new transaction code ZFI_H2H is built on program ZRFFOZA_H2H_FI and the system refuses to run.
when i see the message it shows like this...
The list of payment methods (M) may only be processed by other payment medium programs.
now how can i bypass this check for this program only?
can i have some info please....
Thanks,
pasala.hi FI masters,
to be more clear to the above quetion,
i have 2 zprog for the Payment run
for the Payment method 'M' i have z prog ZRFFOZA_H2H which is configued
again i have made a copy of above prog to ZRFFOZA_H2H_FI and run the payment run for the Payemnt method 'M'.
Now it gives me a message : Payment method(s) are not allowed for this program.
since below copy prog not configed we get this message.
NOW : What can i do to bypass this check for this program only
can i have some info pls?
thanks again,
pasala. -
Airport Extreme ver. g Failed security check for my credit card processing!
Hope this hasn't just been addressed here but I signed up for a new credit card processing service and they have a company called securitymetrics that checks the level of safety for your cc processing setup.
I failed the check due to Airport Extreme settings and don't know how to fix it.
Short version:
failure 1:Your computer is answering ping requests. Hackers use Ping to scan the Internet to see if computers will answer. If your computer answers then a hacker will know your computer exists and your computer could become a hacker target. You should install a firewall or turn off Ping requests.
failure 2:It is possible to gather information about the remote base station (such as its connection type or connection time) by sending packets to UDP port 192. An attacker connected to this network may also use this protocol to force the base station to disconnect from the network if it is using PPPoE, thus causing a denial of service for the other users. Solution: Filter incoming traffic to this port and make sure only authorized hosts can connect to the wireless network this base station listens on.
Anyone know how to address these? I looked at the settings on Airport Utility and couldn't find anything.You would enter 192 in both the Public & Private UDP/TCP entries. The Private IP Address would be an address of a non-existent device. For example, if the DHCP range is 10.0.1.2 - 10.0.1.200, enter 10.0.1.201 for this entry. (This, of course, would mean you do not have a client assigned this IP.)
-
Failed preliminary checks for Oracle Real Application Cluster 12C.
Hi, all. Please, help to investigate and solve. Thanks.
[grid@orac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n orac1,orac2 -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "orac1"
Destination Node Reachable?
orac1 yes
orac2 yes
Result: Node reachability check passed from node "orac1"
Checking user equivalence...
Check: User equivalence for user "grid"
Node Name Status
orac2 passed
orac1 passed
Result: User equivalence check passed for user "grid"
Checking node connectivity...
Checking hosts config file...
Node Name Status
orac1 passed
orac2 passed
Verification of the hosts config file successful
Interface information for node "orac1"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500
eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5B:D7:29 1500
Interface information for node "orac2"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500
eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9D:27:D8 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500
Check: Node connectivity of subnet "10.154.137.0"
Source Destination Connected?
orac1[10.154.137.101] orac2[10.154.137.102] yes
Result: Node connectivity passed for subnet "10.154.137.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.154.137.0"
Source Destination Connected?
orac1:10.154.137.101 orac2:10.154.137.102 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.154.137.101" and "orac2 : 10.154.137.102" failed
Result: TCP connectivity check failed for subnet "10.154.137.0"
Check: Node connectivity of subnet "10.154.138.0"
Source Destination Connected?
orac1[10.154.138.101] orac2[10.154.138.102] yes
Result: Node connectivity passed for subnet "10.154.138.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.154.138.0"
Source Destination Connected?
orac1:10.154.138.101 orac2:10.154.138.102 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.154.138.101" and "orac2 : 10.154.138.102" failed
Result: TCP connectivity check failed for subnet "10.154.138.0"
Check: Node connectivity of subnet "10.0.4.0"
Source Destination Connected?
orac1[10.0.4.15] orac2[10.0.4.15] yes
Result: Node connectivity passed for subnet "10.0.4.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.0.4.0"
Source Destination Connected?
orac1:10.0.4.15 orac2:10.0.4.15 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.0.4.15" and "orac2 : 10.0.4.15" failed
Result: TCP connectivity check failed for subnet "10.0.4.0"
Interfaces found on subnet "10.0.4.0" that are likely candidates for VIP are:
orac1 eth2:10.0.4.15
orac2 eth2:10.0.4.15
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "10.154.137.0".
Subnet mask consistency check passed for subnet "10.154.138.0".
Subnet mask consistency check passed for subnet "10.0.4.0".
Subnet mask consistency check passed.
ERROR:
PRVG-1172 : The IP address "10.0.4.15" is on multiple interfaces "eth2,eth2" on nodes "orac2,orac1"
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "10.154.137.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.154.137.101" on node "orac1" is not able to communicate with interface "10.154.137.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.101" on node "orac1" is not able to communicate with interface "10.154.137.102" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.102" on node "orac2" is not able to communicate with interface "10.154.137.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.102" on node "orac2" is not able to communicate with interface "10.154.137.102" on node "orac2" over multicast group "224.0.0.251"
Checking subnet "10.154.138.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.154.138.101" on node "orac1" is not able to communicate with interface "10.154.138.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.101" on node "orac1" is not able to communicate with interface "10.154.138.102" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.102" on node "orac2" is not able to communicate with interface "10.154.138.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.102" on node "orac2" is not able to communicate with interface "10.154.138.102" on node "orac2" over multicast group "224.0.0.251"
Checking subnet "10.0.4.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.0.4.15" on node "orac1" is not able to communicate with interface "10.0.4.15" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac1" is not able to communicate with interface "10.0.4.15" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac2" is not able to communicate with interface "10.0.4.15" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac2" is not able to communicate with interface "10.0.4.15" on node "orac2" over multicast group "224.0.0.251"
Checking ASMLib configuration.
Node Name Status
orac1 passed
orac2 passed
Result: Check for ASMLib configuration passed.
Check: Total memory
Node Name Available Required Status
orac2 5.714GB (5991520.0KB) 4GB (4194304.0KB) passed
orac1 5.714GB (5991520.0KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Status
orac2 5.2293GB (5483324.0KB) 50MB (51200.0KB) passed
orac1 5.1456GB (5395600.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Status
orac2 6.125GB (6422520.0KB) 5.714GB (5991520.0KB) passed
orac1 6.125GB (6422520.0KB) 5.714GB (5991520.0KB) passed
Result: Swap space check passed
Check: Free disk space for "orac2:/usr,orac2:/var,orac2:/etc,orac2:/sbin,orac2:/tmp"
Path Node Name Mount point Available Required Status
/usr orac2 / 37.8398GB 1.0635GB passed
/var orac2 / 37.8398GB 1.0635GB passed
/etc orac2 / 37.8398GB 1.0635GB passed
/sbin orac2 / 37.8398GB 1.0635GB passed
/tmp orac2 / 37.8398GB 1.0635GB passed
Result: Free disk space check passed for "orac2:/usr,orac2:/var,orac2:/etc,orac2:/sbin,orac2:/tmp"
Check: Free disk space for "orac1:/usr,orac1:/var,orac1:/etc,orac1:/sbin,orac1:/tmp"
Path Node Name Mount point Available Required Status
/usr orac1 / 32.4382GB 1.0635GB passed
/var orac1 / 32.4382GB 1.0635GB passed
/etc orac1 / 32.4382GB 1.0635GB passed
/sbin orac1 / 32.4382GB 1.0635GB passed
/tmp orac1 / 32.4382GB 1.0635GB passed
Result: Free disk space check passed for "orac1:/usr,orac1:/var,orac1:/etc,orac1:/sbin,orac1:/tmp"
Check: User existence for "grid"
Node Name Status Comment
orac2 passed exists(1100)
orac1 passed exists(1100)
Checking for multiple users with UID value 1100
Result: Check for multiple users with UID value 1100 passed
Result: User existence check passed for "grid"
Check: Group existence for "oinstall"
Node Name Status Comment
orac2 passed exists
orac1 passed exists
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
orac2 passed exists
orac1 passed exists
Result: Group existence check passed for "dba"
Check: Membership of user "grid" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Status
orac2 yes yes yes yes passed
orac1 yes yes yes yes passed
Result: Membership check for user "grid" in group "oinstall" [as Primary] passed
Check: Membership of user "grid" in group "dba"
Node Name User Exists Group Exists User in Group Status
orac2 yes yes yes passed
orac1 yes yes yes passed
Result: Membership check for user "grid" in group "dba" passed
Check: Run level
Node Name run level Required Status
orac2 5 3,5 passed
orac1 5 3,5 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Status
orac2 hard 4096 65536 failed
orac1 hard 4096 65536 failed
Result: Hard limits check failed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Status
orac2 soft 1024 1024 passed
orac1 soft 4096 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Status
orac2 hard 46654 16384 passed
orac1 hard 46654 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Status
orac2 soft 1024 2047 failed
orac1 soft 1024 2047 failed
Result: Soft limits check failed for "maximum user processes"
Check: System architecture
Node Name Available Required Status
orac2 x86_64 x86_64 passed
orac1 x86_64 x86_64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Status
orac2 2.6.32-279.el6.x86_64 2.6.32 passed
orac1 2.6.32-279.el6.x86_64 2.6.32 passed
Result: Kernel version check passed
Check: Kernel parameter for "semmsl"
Node Name Current Configured Required Status Comment
orac1 250 250 250 passed
orac2 250 250 250 passed
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns"
Node Name Current Configured Required Status Comment
orac1 32000 32000 32000 passed
orac2 32000 32000 32000 passed
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm"
Node Name Current Configured Required Status Comment
orac1 100 100 100 passed
orac2 100 100 100 passed
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni"
Node Name Current Configured Required Status Comment
orac1 128 128 128 passed
orac2 128 128 128 passed
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax"
Node Name Current Configured Required Status Comment
orac1 4398046511104 4398046511104 3067658240 passed
orac2 4398046511104 4398046511104 3067658240 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Current Configured Required Status Comment
orac1 4096 4096 4096 passed
orac2 4096 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall"
Node Name Current Configured Required Status Comment
orac1 4294967296 4294967296 599152 passed
orac2 4294967296 4294967296 599152 passed
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max"
Node Name Current Configured Required Status Comment
orac1 6815744 6815744 6815744 passed
orac2 6815744 6815744 6815744 passed
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range"
Node Name Current Configured Required Status Comment
orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default"
Node Name Current Configured Required Status Comment
orac1 262144 262144 262144 passed
orac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max"
Node Name Current Configured Required Status Comment
orac1 4194304 4194304 4194304 passed
orac2 4194304 4194304 4194304 passed
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default"
Node Name Current Configured Required Status Comment
orac1 262144 262144 262144 passed
orac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "wmem_default"
Check: Kernel parameter for "wmem_max"
Node Name Current Configured Required Status Comment
orac1 1048576 1048576 1048576 passed
orac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr"
Node Name Current Configured Required Status Comment
orac1 1048576 1048576 1048576 passed
orac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "binutils"
Node Name Available Required Status
orac2 binutils-2.20.51.0.2-5.34.el6 binutils-2.20.51.0.2 passed
orac1 binutils-2.20.51.0.2-5.34.el6 binutils-2.20.51.0.2 passed
Result: Package existence check passed for "binutils"
Check: Package existence for "compat-libcap1"
Node Name Available Required Status
orac2 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
orac1 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
Result: Package existence check passed for "compat-libcap1"
Check: Package existence for "compat-libstdc++-33(x86_64)"
Node Name Available Required Status
orac2 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
orac1 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
Result: Package existence check passed for "compat-libstdc++-33(x86_64)"
Check: Package existence for "libgcc(x86_64)"
Node Name Available Required Status
orac2 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed
orac1 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed
Result: Package existence check passed for "libgcc(x86_64)"
Check: Package existence for "libstdc++(x86_64)"
Node Name Available Required Status
orac2 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed
orac1 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++(x86_64)"
Check: Package existence for "libstdc++-devel(x86_64)"
Node Name Available Required Status
orac2 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed
orac1 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++-devel(x86_64)"
Check: Package existence for "sysstat"
Node Name Available Required Status
orac2 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed
orac1 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed
Result: Package existence check passed for "sysstat"
Check: Package existence for "gcc"
Node Name Available Required Status
orac2 gcc-4.4.7-11.el6 gcc-4.4.4 passed
orac1 gcc-4.4.7-11.el6 gcc-4.4.4 passed
Result: Package existence check passed for "gcc"
Check: Package existence for "gcc-c++"
Node Name Available Required Status
orac2 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed
orac1 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed
Result: Package existence check passed for "gcc-c++"
Check: Package existence for "ksh"
Node Name Available Required Status
orac2 ksh-20120801-21.el6.1 ksh-... passed
orac1 ksh-20120801-21.el6.1 ksh-... passed
Result: Package existence check passed for "ksh"
Check: Package existence for "make"
Node Name Available Required Status
orac2 make-3.81-20.el6 make-3.81 passed
orac1 make-3.81-20.el6 make-3.81 passed
Result: Package existence check passed for "make"
Check: Package existence for "glibc(x86_64)"
Node Name Available Required Status
orac2 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed
orac1 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed
Result: Package existence check passed for "glibc(x86_64)"
Check: Package existence for "glibc-devel(x86_64)"
Node Name Available Required Status
orac2 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed
orac1 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed
Result: Package existence check passed for "glibc-devel(x86_64)"
Check: Package existence for "libaio(x86_64)"
Node Name Available Required Status
orac2 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
orac1 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio(x86_64)"
Check: Package existence for "libaio-devel(x86_64)"
Node Name Available Required Status
orac2 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
orac1 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio-devel(x86_64)"
Check: Package existence for "nfs-utils"
Node Name Available Required Status
orac2 nfs-utils-1.2.3-26.el6 nfs-utils-1.2.3-15 passed
orac1 nfs-utils-1.2.3-26.el6 nfs-utils-1.2.3-15 passed
Result: Package existence check passed for "nfs-utils"
Checking availability of ports "6200,6100" required for component "Oracle Notification Service (ONS)"
Node Name Port Number Protocol Available Status
orac2 6200 TCP yes successful
orac1 6200 TCP yes successful
orac2 6100 TCP yes successful
orac1 6100 TCP yes successful
Result: Port availability check passed for ports "6200,6100"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting check for consistency of primary group of root user
Node Name Status
orac2 passed
orac1 passed
Check for consistency of root user's primary group passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
orac2 yes
orac1 yes
Result: Liveness check passed for "ntpd"
Check for NTP daemon or service alive passed on all nodes
Checking whether NTP daemon or service is using UDP port 123 on all nodes
Check for NTP daemon or service using UDP port 123
Node Name Port Open?
orac2 yes
orac1 yes
NTP common Time Server Check started...
NTP Time Server "193.27.209.1" is common to all nodes on which the NTP daemon is running
NTP Time Server "194.29.130.252" is common to all nodes on which the NTP daemon is running
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Checking on nodes "[orac2, orac1]"...
Check: Clock time offset from NTP Time Server
Time Server: 193.27.209.1
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
orac2 -355.25 passed
orac1 -124.19 passed
Time Server "193.27.209.1" has time offsets that are within permissible limits for nodes "[orac2, orac1]".
Time Server: 194.29.130.252
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
orac2 -358.87 passed
orac1 -109.63 passed
Time Server "194.29.130.252" has time offsets that are within permissible limits for nodes "[orac2, orac1]".
Clock time offset check passed
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "grid" is not in "root" group
Node Name Status Comment
orac2 passed does not exist
orac1 passed does not exist
Result: User "grid" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
orac2 0022 0022 passed
orac1 0022 0022 passed
Result: Default user file creation mask check passed
Checking integrity of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
WARNING:
PRVF-5640 : Both search and domain entries are present in file "/etc/resolv.conf" on the following nodes: orac1,orac2
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
Checking file "/etc/resolv.conf" to make sure that only one domain entry is defined
More than one "domain" entry does not exist in any "/etc/resolv.conf" file
All nodes have same "domain" entry defined in file "/etc/resolv.conf"
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
More than one "search" entry does not exist in any "/etc/resolv.conf" file
All nodes have same "search" order defined in file "/etc/resolv.conf"
Checking DNS response time for an unreachable node
Node Name Status
orac1 passed
orac2 passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
Check for integrity of file "/etc/resolv.conf" passed
Check: Time zone consistency
Result: Time zone consistency check passed
Checking integrity of name service switch configuration file "/etc/nsswitch.conf" ...
Checking if "hosts" entry in file "/etc/nsswitch.conf" is consistent across nodes...
Checking file "/etc/nsswitch.conf" to make sure that only one "hosts" entry is defined
More than one "hosts" entry does not exist in any "/etc/nsswitch.conf" file
All nodes have same "hosts" entry defined in file "/etc/nsswitch.conf"
Check for integrity of name service switch configuration file "/etc/nsswitch.conf" passed
Checking daemon "avahi-daemon" is not configured and running
Check: Daemon "avahi-daemon" not configured
Node Name Configured Status
orac2 yes failed
orac1 yes failed
Daemon not configured check failed for process "avahi-daemon"
Check: Daemon "avahi-daemon" not running
Node Name Running? Status
orac2 yes failed
orac1 yes failed
Daemon not running check failed for process "avahi-daemon"Yes, i can.
Node1.
[grid@orac1 grid]$ ping 10.154.137.101
PING 10.154.137.101 (10.154.137.101) 56(84) bytes of data.
64 bytes from 10.154.137.101: icmp_seq=1 ttl=64 time=0.105 ms
64 bytes from 10.154.137.101: icmp_seq=2 ttl=64 time=0.089 ms
64 bytes from 10.154.137.101: icmp_seq=3 ttl=64 time=0.056 ms
64 bytes from 10.154.137.101: icmp_seq=4 ttl=64 time=0.086 ms
^C
--- 10.154.137.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3098ms
rtt min/avg/max/mdev = 0.056/0.084/0.105/0.017 ms
[grid@orac1 grid]$ ping 10.154.137.102
PING 10.154.137.102 (10.154.137.102) 56(84) bytes of data.
64 bytes from 10.154.137.102: icmp_seq=1 ttl=64 time=2.15 ms
64 bytes from 10.154.137.102: icmp_seq=2 ttl=64 time=0.497 ms
64 bytes from 10.154.137.102: icmp_seq=3 ttl=64 time=0.364 ms
^C
--- 10.154.137.102 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2495ms
rtt min/avg/max/mdev = 0.364/1.003/2.150/0.813 ms
[grid@orac1 grid]$ ping 10.154.138.101
PING 10.154.138.101 (10.154.138.101) 56(84) bytes of data.
64 bytes from 10.154.138.101: icmp_seq=1 ttl=64 time=0.059 ms
64 bytes from 10.154.138.101: icmp_seq=2 ttl=64 time=0.173 ms
64 bytes from 10.154.138.101: icmp_seq=3 ttl=64 time=0.046 ms
64 bytes from 10.154.138.101: icmp_seq=4 ttl=64 time=0.056 ms
^C
--- 10.154.138.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3205ms
rtt min/avg/max/mdev = 0.046/0.083/0.173/0.052 ms
[grid@orac1 grid]$ ping 10.154.138.102
PING 10.154.138.102 (10.154.138.102) 56(84) bytes of data.
64 bytes from 10.154.138.102: icmp_seq=1 ttl=64 time=1.80 ms
64 bytes from 10.154.138.102: icmp_seq=2 ttl=64 time=0.418 ms
64 bytes from 10.154.138.102: icmp_seq=3 ttl=64 time=0.899 ms
^C
--- 10.154.138.102 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2860ms
rtt min/avg/max/mdev = 0.418/1.041/1.808/0.577 ms
[grid@orac1 grid]$
Node2.
[grid@orac2 ~]$ ping 10.154.137.101
PING 10.154.137.101 (10.154.137.101) 56(84) bytes of data.
64 bytes from 10.154.137.101: icmp_seq=1 ttl=64 time=0.537 ms
64 bytes from 10.154.137.101: icmp_seq=2 ttl=64 time=1.79 ms
64 bytes from 10.154.137.101: icmp_seq=3 ttl=64 time=0.733 ms
^C
--- 10.154.137.101 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2774ms
rtt min/avg/max/mdev = 0.537/1.021/1.794/0.552 ms
[grid@orac2 ~]$ ping 10.154.137.102
PING 10.154.137.102 (10.154.137.102) 56(84) bytes of data.
64 bytes from 10.154.137.102: icmp_seq=1 ttl=64 time=0.043 ms
64 bytes from 10.154.137.102: icmp_seq=2 ttl=64 time=0.106 ms
64 bytes from 10.154.137.102: icmp_seq=3 ttl=64 time=0.039 ms
64 bytes from 10.154.137.102: icmp_seq=4 ttl=64 time=0.039 ms
^C
--- 10.154.137.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3282ms
rtt min/avg/max/mdev = 0.039/0.056/0.106/0.029 ms
[grid@orac2 ~]$ ping 10.154.138.101
PING 10.154.138.101 (10.154.138.101) 56(84) bytes of data.
64 bytes from 10.154.138.101: icmp_seq=1 ttl=64 time=0.718 ms
64 bytes from 10.154.138.101: icmp_seq=2 ttl=64 time=0.515 ms
64 bytes from 10.154.138.101: icmp_seq=3 ttl=64 time=0.504 ms
^C
--- 10.154.138.101 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2468ms
rtt min/avg/max/mdev = 0.504/0.579/0.718/0.098 ms
[grid@orac2 ~]$ ping 10.154.138.102
PING 10.154.138.102 (10.154.138.102) 56(84) bytes of data.
64 bytes from 10.154.138.102: icmp_seq=1 ttl=64 time=0.058 ms
64 bytes from 10.154.138.102: icmp_seq=2 ttl=64 time=0.087 ms
64 bytes from 10.154.138.102: icmp_seq=3 ttl=64 time=0.052 ms
64 bytes from 10.154.138.102: icmp_seq=4 ttl=64 time=0.090 ms
^C
--- 10.154.138.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3755ms
rtt min/avg/max/mdev = 0.052/0.071/0.090/0.019 ms
[grid@orac2 ~]$ -
Repository Consistency Checker for ODI
Hello all,
I want to run RCC utility to check for my patch upgrade. Do i need to download RCC utility from My Oracle support or it already exist somewhere in the installation directory?
ThanksHello,
I have a problem with the RCC.
Java Version : j2re1.4.2_19.
Path(includes) : C:\Program Files\Java\j2re1.4.2_19\bin.
JDBC Oracle Driver: ojdbc14.jar
Config Properties: OK, no problem; connection successful.
Repository DB: Oracle 10g
Repository DB OS: Sun Solaris 9 or Windows 2003 Server (exactly same issue)
ODIW - ODIM user previlige: Admin ALL
ODI Version: 10.1.3.x
Although everything seems fine, I got an error during the repository consistency check. When I search the net for the error message I could not find anything.
D:\ORACLEDI\diag_tools\bin>rcc.bat
Options:
P r e p a r i n g a R e p o s i t o r y u p g r a d e ? 1
S e t t h e t y p e o f a n a l y z i s 2
S e l e c t t h e M a s t e r R e p o s i t o r y c o n n e c t i o n 1
Resetting the analyzed Models...
Resetting the reference data...
Analyzing the Master Repository...
Updating the RCC data...
Checking the structure and contents of your Repository...
Updating the reference data...
Building the Repository related objects...
Reverse engineering the Repository structure...
Verifying the Repository structure...
Traceback (innermost last):
File "../bin/ODI_consistency_check.py", line 2875, in ?
File "../bin/ODI_consistency_check.py", line 2507, in run_analyze_master
File "../bin/ODI_consistency_check.py", line 1395, in run_analyze_repository
+>>> Master - RUN___ANALYZE_REPOSITORY failed.+
Master - Verify Infrastructure
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.getBindVar(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.d
D:\ORACLEDI\diag_tools\bin>
Is this a kind of repository issue? Do RCC utility raise this error because my repository is not consistent? Hard to understand for me...
Any help will be appretiated.
Thanks.
Haluk -
BADI/User exit for ME18 to specifically check for Approval Level...
Hi all,
I hope this is not a repost. I have found none so far in SDN forum. However if do, please point it to me. I will gladly close this thread.
Ok, i need a userexit/badi, whichever will do, to check for user approval levels in ME18.
So far I couldn't find a user exit/Badi that is suitable in my SAP system using SMOD and the program that find user exit by TCODE.
I hope SAP do provide a user exit that can actually check for user Approval Level in ME18.
Can anyone share this info on this issue?
Thanks,
William WilstrothThere are few enhancement points available for ME18. Please check them once.
Thanks,
Srinivas -
Hi
In my sharepont farm a web application configured with RBS and its working fine,
when users upload pdfs the no of files are increased in RBS file system folder,
but when i run Consistency check before running RBS maintainer for cleaning garbage dta for this web applications content database , i faced below issue , its saying
C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer>Microsoft.Da
ta.SqlRemoteBlobs.Maintainer.exe -ConnectionStringName RBS_2 -Operation Consiste
ncyCheck -ConsistencyCheckMode c
Starting Maintainer tasks.
Starting RBS consistency check with check only.
The column <RbsId> in table <dbo.AllDocStreams>
registered with RBS is invalid.
and also when i repair consistency checks its saying same message, that RBSID in table AllDocStreams registered with RBS is invalid.
and also its recommended to check consistency before cleaning garbage data from content database
adilhttp://social.technet.microsoft.com/Forums/sharepoint/en-US/e9bda580-b9e7-48c5-b18c-485e016677a1/rbs-maintainer-not-cleanup-files-in-file-system-sharepoint-2010?forum=sharepointadminprevious
The GC of RBS maintainer just purges BLOBs in SQL Server. And FILESTREAM GC is needed to purge the files in file system.
http://www.sqlskills.com/BLOGS/PAUL/post/FILESTREAM-garbage-collection.aspx : (FILESTREAM GC)... runs as part of the database checkpoint
process. This is what causes some confusion - an old FILESTREAM file will not be removed until after it is no longer needed AND a checkpoint runs.
Yes, In Simple recovery mode, just run SQL statement:
CHECKPOINT;
In Full recovery mode, two transaction log with CHECKPOINT are needed. Detail in the link above.
http://blog.avtex.com/2011/05/16/remote-blob-store-rbs-and-sharepoint-2010-part-2/
If this helped you resolve your issue, please mark it Answered
Maybe you are looking for
-
HT4623 Why can I not get the iPhoto and iMovie apps for free on my new iPad air
I have an iPhone 5 but just got an iPad air for Christmas. I didn't realize I set my iPad up under another Apple ID until my phone was not syncing with my iPad so I erased all content and reset the device to put them both on the same Apple ID. The pr
-
How work all field in reader created with acrobat
All fields are created with acrobat.Some fields such as attachment button (app.execMenuItem("AddFileAttachment");) are not work in reader though I have used "reader extended PDF" contained in acrobat. How can I able to use those fields in reader? Ple
-
How do I remove annoying word advertisement on every web page?
Hi everyone, I hope I can get help on this. Recently, everytime I browse internet pages several words get highlighted and when I pass the mouse over the words they automatically pop up. It wasn't so annoying at first but more and more words are getti
-
How to save only changed data of ALV in a local table ?
Hi everyone, I created and alv with cl_gui_alv_grid, and I made it editable Now I need that when I click on a button only the changed data to be saved on a local (internal) table Is there a way I can do that ? I tried with methods like check_changed_
-
My contacts backup file is not opening
my contacts backup file is not opening