Failed Delta from R/3

Hi all:
I had a failed delta load from R/3 ( Cost Centers: Actual Costs Through Delta(0CO_OM_CCA_9) ) to our BW Production System . We deleted the requests that failed . We tried doing re-construct but it says the previous delta has not finished .Is there any mechanism in BW that can give me the previous delta .
Thanks in advance for your help
Prabhu

Hi Bhanu
Following is the message in the monitor :
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Error correction:
Follow the instructions in the short dump.
Thanks
Prabhu

Similar Messages

  • How to repair the failed delta from R/3 - 0CCA_C11

    Hi experts,
    Due to R/3 refresh the delta load from 0CO_OM_CCA_9 -> 0CCA_C11 is failed on july19, 2008. but on July 20 another delta is successfully loaded in to the cube after the R/3 refresh.
    My question is I can reinit the cube from R/3 and do a full repair request for the month of july is it right?
    Because cube is a addition and I don't want the duplicate records in to the cube. Do I have to delete all the requests that are loaded in the month of july to run the full repair request for the whole month of july, 2008?
    Please let me know. Thank you.
    Sharat.

    Hi,
    You can delete the request in Infocube. 
    Before doing this, check the job status in the source system and the log.  See if any records are sent in the form of IDOCs in the job log of source system. 
    If you dont find any job generated in the source system or records sent in that request from source system, forcibly make the technical status in the monitor screen of BW as red and also the QM status in the Infocube Manage screen as red.  Then delete the request from Infocube.
    Let me know if you need any further information.
    Regards,
    Ravi Kishore

  • Restore failed delta from ODS to cube

    Hi All,
    I have started a delta load from ODS to cube but it has failed abruptly, for some reason, with out extracting even a single record.
    I want to restart/re-schedule the load but I am confused how to do that(just a delta or repair/repeat delta).
    Can someone please suggest how to proceed.
    Rgds,
    RPK.

    Hi Ravi,
    I had to stop the request because of some other issues and now I have to start it again. There is no particular error.
    Hi PB,
    Thanks a lot for the reply. Are you sure that I have to delete this failed request first? Will it prompt for a repeat delta when I try to schedule it again?
    Sorry for asking these questions but just want to make sure about it.
    Rgds,
    RPK.

  • How many times you can repeat a failed delta?

    Hi, Expert, I am facing with an failed delta that loads data from a DSO to another. I have repeated the delta 4 times. The first two times, it failed with deadlock, the 3rd time, it failed with out of internal memory issue and now I am getting 6 system core dumped. Just wondering, if there is limit that one can repeat a failed delta? If anyone have any idea about what need to be done on system core dumps, it will be greatly appreciated.
    Chimei Shea

    HI, every one,
    Glad that I am able to answer my own questions.
    1. Yes, you can repeat a delta multiple times without damaging the delta queue. (need to change QM status to red before delete the request and then repeat the delta by either running the infopackage manually or repeat the failed infopackage in a process chain)
    2. The memory/deadlock/system core dump issues may be fixed by decreasing MAXLINE parameter in ROIDOCPRMS through SBIW. I don't know exactly what MAXLINE is used for but I have a guess that MAXLINE controls how often a data package commit to the database. My issue was that in the start routine of an update rule, for every record from the source, it generates 13 records so it increases the size of a data package 13 times and causes the various dumps. By decreasing MAXLINE only and even each data package still generates half million records, the data load didn't fail.
    Chimei Shea

  • Deleted failed DC from the domain (Server 2012 R2) - Now after doing metadata and DNS cleanup, I can no longer promote a new DC to the domain

    I work for a university and teach IT courses to undergrad and graduate students. The details below are pertaining an isolated lab environment
    I had a storage failure in my lab and the DCs became corrupt. This is a university lab environment so there isn't anything crucial on here. I just would rather avoid rebuilding the domain/forest and would rather use this as a learning experience with my
    students...
    So after the storage failed and was restored, the VMs hosted became corrupt. I did a NTDSUTIL to basically repair the NDTS.dit file but one of my DCs reverted to a state before DC promotion. Naturally, the domain still had this object in AD. After numerous
    failed attempts at trying to reinstall the DC on the server through the server manager wizard in 2012 R2, I decided that a metadata cleanup of the old failed object was necessary.
    Utilizing this article, I removed all references of the failed DC from both AD and DNS (http://www.petri.com/delete_failed_dcs_from_ad.htm) 
    So now that the failed object is removed completely from the domain and the metadata cleanup was successful, I then proceeded to re-install the necessary AD DS role on the server and re-promote to the existing domain. Pre-Requisites pass but generate some
    warning around DNS Delgation, and Dynamic Updates (delegation is ignored because the lab is isolated from external comms, and dynamic updates are in fact enabled on both my _msdcs and root domain zones).
    Upon the promotion process, I get the following error message (also worth mentioning - the account performing these operations is a member of DA, EA, and Schema Admins)
    The operation failed because:
    Active Directory Domain Services could not create the NTDS Settings object for this Active Directory Domain Controller CN=NTDS Settings,CN=domainVMDC1,CN=Servers,CN=Default-
    First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu on the remote AD DC domainVMDC2. Ensure the provided network credentials have sufficient permissions.
    "While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync."
    As you can see, this error seems odd considering. Now that I'm down to a single DC and DNS server, the sync should be corrected. I've run a repadmin /syncall and it completed successfully. Since then, I've run dcdiags and dumped those to a text as well and
    here are my results...
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = domainVMDC2
       * Identified AD Forest. 
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\domainVMDC2
          Starting test: Connectivity
             ......................... domainVMDC2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\domainVMDC2
          Starting test: Advertising
             ......................... domainVMDC2 passed test Advertising
          Starting test: FrsEvent
             ......................... domainVMDC2 passed test FrsEvent
          Starting test: DFSREvent
             ......................... domainVMDC2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... domainVMDC2 passed test SysVolCheck
          Starting test: KccEvent
             ......................... domainVMDC2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... domainVMDC2 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... domainVMDC2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... domainVMDC2 passed test NCSecDesc
          Starting test: NetLogons
             ......................... domainVMDC2 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... domainVMDC2 passed test ObjectsReplicated
          Starting test: Replications
             ......................... domainVMDC2 passed test Replications
          Starting test: RidManager
             ......................... domainVMDC2 passed test RidManager
          Starting test: Services
             ......................... domainVMDC2 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x00001795
                Time Generated: 12/18/2014   00:35:03
                Event String:
                The program lsass.exe, with the assigned process ID 476, could not authenticate locally by using the target name ldap/domainvmdc2.domain.school.edu. The target name used is not valid. A target name should
    refer to one of the local computer names, for example, the DNS host name.
             ......................... domainVMDC2 passed test SystemLog
          Starting test: VerifyReferences
             ......................... domainVMDC2 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
                For the partition
                (DC=ForestDnsZones,DC=domain,DC=school,DC=edu) we encountered
                the following error retrieving the cross-ref's
                (CN=3098109a-ff99-41d4-8926-0e814ac8efde,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... ForestDnsZones failed test CheckSDRefDom
          Starting test: CrossRefValidation
                For the partition
                (DC=ForestDnsZones,DC=domain,DC=school,DC=edu) we encountered
                the following error retrieving the cross-ref's
                (CN=3098109a-ff99-41d4-8926-0e814ac8efde,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... ForestDnsZones failed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
                For the partition
                (DC=DomainDnsZones,DC=domain,DC=school,DC=edu) we encountered
                the following error retrieving the cross-ref's
                (CN=2f0b8ac0-2630-441a-891f-b5fcb91498a8,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... DomainDnsZones failed test CheckSDRefDom
          Starting test: CrossRefValidation
                For the partition
                (DC=DomainDnsZones,DC=domain,DC=school,DC=edu) we encountered
                the following error retrieving the cross-ref's
                (CN=2f0b8ac0-2630-441a-891f-b5fcb91498a8,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... DomainDnsZones failed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
                For the partition
                (CN=Schema,CN=Configuration,DC=domain,DC=school,DC=edu) we
                encountered the following error retrieving the cross-ref's
                (CN=Enterprise Schema,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... Schema failed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
                For the partition
                (CN=Configuration,DC=domain,DC=school,DC=edu) we encountered
                the following error retrieving the cross-ref's
                (CN=Enterprise Configuration,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... Configuration failed test CrossRefValidation
       Running partition tests on : domain
          Starting test: CheckSDRefDom
             ......................... domain passed test CheckSDRefDom
          Starting test: CrossRefValidation
                For the partition (DC=domain,DC=school,DC=edu) we encountered
                the following error retrieving the cross-ref's
                (CN=domain,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
                 information: 
                   LDAP Error 0x52e (1326). 
             ......................... domain failed test CrossRefValidation
       Running enterprise tests on : domain.school.edu
          Starting test: LocatorCheck
             ......................... domain.school.edu passed test
             LocatorCheck
          Starting test: Intersite
             ......................... domain.school.edu passed test Intersite
    From what I can gather, there is a definite DNS issue but I don't have any stale records to the old DC stored anywhere. I've tried this with a new server as well and get similar errors... 
    At this rate I'm ready to rebuild the entire forest over again. I'm just reluctant to do so as I want to make this a learning experience for the students. 
    Any help would be greatly appreciated. Thanks!

    As you can see, there seems to be some errors. The one that I did correct was the one around the _msdcs NS record being unable to resolve. For whatever, reason the name wasn't resolving the IP but all other NS tabs and records were. Just that one _msdcs
    sub-zone. Furthermore, the mentioning of any connections to root hint servers can be viewed as false positives. There is no external comms to this lab so no communication with outside IPs can be expected. Lastly, they mentioned a connectivity issue yet mention
    that I should check the firewall settings. All three profiles are disabled in Windows Firewall (as they have been the entire time). Thank you in advance for your help!
    C:\Windows\system32>dcdiag /test:dns /v
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine domainVMDC2, is a Directory Server.
       Home Server = domainVMDC2
       * Connecting to directory service on server domainVMDC2.
       * Identified AD Forest.
       Collecting AD specific global data
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded
       Iterating through the sites
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers
       Getting information for the server CN=NTDS Settings,CN=domainVMDC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 1 DC(s). Testing 1 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\domainVMDC2
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             The host
             3a38b19c-4bb3-4542-acb6-9e5e97cc15c4._msdcs.domain.school.edu
             could not be resolved to an IP address. Check the DNS server, DHCP,
             server name, etc.
             Got error while checking LDAP and RPC connectivity. Please check your
             firewall settings.
             ......................... domainVMDC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\domainVMDC2
          Test omitted by user request: Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Test omitted by user request: FrsEvent
          Test omitted by user request: DFSREvent
          Test omitted by user request: SysVolCheck
          Test omitted by user request: KccEvent
          Test omitted by user request: KnowsOfRoleHolders
          Test omitted by user request: MachineAccount
          Test omitted by user request: NCSecDesc
          Test omitted by user request: NetLogons
          Test omitted by user request: ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Test omitted by user request: Replications
          Test omitted by user request: RidManager
          Test omitted by user request: Services
          Test omitted by user request: SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Test omitted by user request: VerifyReferences
          Test omitted by user request: VerifyReplicas
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             See DNS test in enterprise tests section for results
             ......................... domainVMDC2 passed test DNS
       Running partition tests on : ForestDnsZones
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : DomainDnsZones
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : Schema
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : Configuration
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : domain
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running enterprise tests on : domain.school.edu
          Starting test: DNS
             Test results for domain controllers:
                DC: domainVMDC2
                Domain: domain.school.edu
                   TEST: Authentication (Auth)
                      Authentication test: Successfully completed
                   TEST: Basic (Basc)
                      Error: No LDAP connectivity
                      The OS
                      Microsoft Windows Server 2012 R2 Datacenter (Service Pack level: 0.0)
                      is supported.
                      NETLOGON service is running
                      kdc service is running
                      DNSCACHE service is running
                      DNS service is running
                      DC is a DNS server
                      Network adapters information:
                      Adapter [00000010] vmxnet3 Ethernet Adapter:
                         MAC address is 00:50:56:A2:2C:24
                         IP Address is static
                         IP address: *.*.100.26
                         DNS servers:
                            *.*.100.26 (domainVMDC2) [Valid]
                      No host records (A or AAAA) were found for this DC
                      The SOA record for the Active Directory zone was found
                      The Active Directory zone on this DC/DNS server was found primary
                      Root zone on this DC/DNS server was not found
                   TEST: Forwarders/Root hints (Forw)
                      Recursion is enabled
                      Forwarders are not configured on this DNS server
                      Root hint Information:
                         Name: a.root-servers.net. IP: 198.41.0.4 [Invalid (unreachable)]
                         Name: b.root-servers.net. IP: 192.228.79.201 [Invalid (unreachable)]
                         Name: c.root-servers.net. IP: 192.33.4.12 [Invalid (unreachable)]
                         Name: d.root-servers.net. IP: 199.7.91.13 [Invalid (unreachable)]
                         Name: e.root-servers.net. IP: 192.203.230.10 [Invalid (unreachable)]
                         Name: f.root-servers.net. IP: 192.5.5.241 [Invalid (unreachable)]
                         Name: g.root-servers.net. IP: 192.112.36.4 [Invalid (unreachable)]
                         Name: h.root-servers.net. IP: 128.63.2.53 [Invalid (unreachable)]
                         Name: i.root-servers.net. IP: 192.36.148.17 [Invalid (unreachable)]
                         Name: j.root-servers.net. IP: 192.58.128.30 [Invalid (unreachable)]
                         Name: k.root-servers.net. IP: 193.0.14.129 [Invalid (unreachable)]
                         Name: l.root-servers.net. IP: 199.7.83.42 [Invalid (unreachable)]
                         Name: m.root-servers.net. IP: 202.12.27.33 [Invalid (unreachable)]
                      Error: Both root hints and forwarders are not configured or
                      broken. Please make sure at least one of them works.
                   TEST: Delegations (Del)
                      Delegation information for the zone: domain.school.edu.
                         Delegated domain name: _msdcs.domain.school.edu.
                            Error: DNS server: domainvmdc2. IP:<Unavailable>
                            [Missing glue A record]
                            [Error details: 9714 (Type: Win32 - Description: DNS name does not exist.)]
                   TEST: Dynamic update (Dyn)
                      Test record dcdiag-test-record added successfully in zone domain.school.edu
                      Warning: Failed to delete the test record dcdiag-test-record in zone domain.school.edu
                      [Error details: 13 (Type: Win32 - Description: The data is invalid.)]
                   TEST: Records registration (RReg)
                      Network Adapter [00000010] vmxnet3 Ethernet Adapter:
                         Matching CNAME record found at DNS server *.*.100.26:
                         3a38b19c-4bb3-4542-acb6-9e5e97cc15c4._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.a9241004-88ea-422d-a71e-df7b622f0d68.domains._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _kerberos._tcp.dc._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.dc._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _kerberos._tcp.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _kerberos._udp.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _kpasswd._tcp.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.Default-First-Site-Name._sites.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _kerberos._tcp.Default-First-Site-Name._sites.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.gc._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _gc._tcp.Default-First-Site-Name._sites.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.domain.school.edu
                         Matching  SRV record found at DNS server *.*.100.26:
                         _ldap._tcp.pdc._msdcs.domain.school.edu
                   Error: Record registrations cannot be found for all the network
                   adapters
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 128.63.2.53 (h.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.63.2.53               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.112.36.4 (g.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.112.36.4               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.203.230.10 (e.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.203.230.10               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.228.79.201 (b.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.228.79.201               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.33.4.12 (c.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.33.4.12               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.36.148.17 (i.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.36.148.17               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.5.5.241 (f.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.5.5.241               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 192.58.128.30 (j.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.58.128.30               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 193.0.14.129 (k.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 193.0.14.129               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 198.41.0.4 (a.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 198.41.0.4               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 199.7.83.42 (l.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 199.7.83.42               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 199.7.91.13 (d.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 199.7.91.13               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 202.12.27.33 (m.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 202.12.27.33               
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: *.*.100.26 (domainVMDC2)
                   All tests passed on this DNS server
                   Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
             Summary of DNS test results:
                                                Auth Basc Forw Del  Dyn  RReg Ext
                Domain: domain.school.edu
                   domainVMDC2                 PASS FAIL FAIL FAIL WARN FAIL n/a
             ......................... domain.school.edu failed test DNS
          Test omitted by user request: LocatorCheck
          Test omitted by user request: Intersite

  • Agreement lookup failed as From trading partner cannot be identified

    Hi,
    I am working on custom document over HTTPS.
    I configured B2B to send custom document over Generic Exchange(transport - HTTPS).
    I enqueue the XML document with AQ header to IP_OUT_QUEUE. B2B is able to read the data from IP_OUT_QUEUE and invokes the client Webapplication.
    I changed the IP_OUT_QUEUE to custom AQ. B2B is able to read data from custom AQ, but B2B throws "Trading partner agreement lookup failed as From trading partner cannot be identified"
    b2b.log:
    2010.02.15 at 13:03:44:470: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.02.15 at 13:03:44:471: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.02.15 at 13:03:44:497: Thread-22: B2B - (DEBUG)
    Protocol = AQ
    Version = null
    Transport Header
    aq.receiver.expiration:-1
    aq.receiver.delay:0
    aq.receiver.priority:1
    aq.receiver.correlation:b2buser
    2010.02.15 at 13:03:44:881: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
    2010.02.15 at 13:03:44:907: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
    2010.02.15 at 13:03:44:921: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
    2010.02.15 at 13:03:45:069: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppInterfaceListener:onMessage calling processOutgoingMessage
    2010.02.15 at 13:03:45:069: Thread-22: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Enter
    2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Enter
    2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
    2010.02.15 at 13:03:45:071: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Leave
    2010.02.15 at 13:03:45:076: Thread-22: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: null Value: null
    2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
    2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
    2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage To TP Namenull
    2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage From TP Namenull
    2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage business action name: null
    2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype name: null
    2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype revision: null
    2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage AppMsgIdnull
    2010.02.15 at 13:03:45:094: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage ipmsg.get_MSG_TYPE = 1
    2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: null Type: null Value: null to TPName: null Type: null Value: null
    2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2B Message ID is 0A4DBD67126D1BA2FC700000136A1AD0
    2010.02.15 at 13:03:45:099: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage RefTo B2B Message ID is null
    2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage isSignalMsg() == false; call outgoingTPA
    2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processOutgoingTPA() Begin TPA Processing..
    2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
    initial : null
    from : TPName: null Type: null Value: null
    to : TPName: null Type: null Value: null
    final : null
    initiating : TPName: null Type: null Value: null
    2010.02.15 at 13:03:45:101: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is outgoing
    2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
    2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
    2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty with : TPName: Acme Type: null Value: null
    2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
    initial : null
    from : TPName: Acme Type: null Value: null
    to : TPName: null Type: null Value: null
    final : null
    initiating : TPName: Acme Type: null Value: null
    2010.02.15 at 13:03:45:113: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: null docTypeRevision: null
    2010.02.15 at 13:03:45:118: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: null actionRevision: null
    2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Set actionRevision in MessageInfo: null
    2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Obtain DocType using actionName and actionRevision.
    2010.02.15 at 13:03:45:124: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : null Activity Version: null
    2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<null>
    2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
    2010.02.15 at 13:03:45:126: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: Acme Type: null Value: null to TPName: Acme Type: null Value: null
    2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
    2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
    2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
    2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
    2010.02.15 at 13:03:45:129: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
    From Party -> null-null-Acme-null To Party -> null-null-null-null Business Action name -> null
    2010.02.15 at 13:03:45:130: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
    at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
    at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
    at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
    at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
    at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
    2010.02.15 at 13:03:45:131: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
    at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
    at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
    at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
    at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
    at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
    2010.02.15 at 13:03:45:131: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
    2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
    2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
    2010.02.15 at 13:03:45:209: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
    2010.02.15 at 13:03:45:211: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
    2010.02.15 at 13:03:45:212: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
    2010.02.15 at 13:03:45:353: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
    2010.02.15 at 13:03:45:354: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
    2010.02.15 at 13:03:45:367: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
    2010.02.15 at 13:03:45:397: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
    2010.02.15 at 13:03:45:398: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
    2010.02.15 at 13:03:45:471: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
    2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
    2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
    2010.02.15 at 13:03:45:476: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
    ** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
    2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
    2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) Engine:notifyApp Enter
    2010.02.15 at 13:03:45:485: Thread-22: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>0A4DBD67126D1BA2FC700000136A1AD0</b2bMessageId>
    <errorCode>AIP-50548</errorCode>
    <errorText>Trading partner agreement lookup failed as From trading partner cannot be identified</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (dgda21a)
    Description: Make sure the trading partner has name, type, and value information
    StackTrace:
    Error -:  AIP-50548:  Trading partner agreement lookup failed as From trading partner cannot be identified
            at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
            at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
            at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
            at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
            at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
            at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
            at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
      ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    2010.02.15 at 13:03:45:512: Thread-22: B2B - (DEBUG) Engine:notifyApp Exit
    2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
    2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) DBContext commit: Enter
    2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Transaction.commit()
    2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Leave
    Kindly help me to resolve this issue.

    hi Anuj,
    I am enqueuing from BPEL process. I have set the AQ header.
    <b2bMsgHeader><Header xmlns="http://xmlns.oracle.com/pcbpel/adapter/aq/publishB2BMessage/">
    <QueueHeader/>
    <PayloadHeader>
    <MSG_ID xmlns="">2SY16SY_TEST_FEB15_07E01null2010021513270041</MSG_ID>
    <INREPLYTO_MSG_ID xmlns=""/>
    <FROM_PARTY xmlns="">Acme</FROM_PARTY>
    <TO_PARTY xmlns="">GlobalChips</TO_PARTY>
    <ACTION_NAME xmlns="">ProcessBusiness</ACTION_NAME>
    <DOCTYPE_NAME xmlns="">DocType</DOCTYPE_NAME>
    <DOCTYPE_REVISION xmlns="">1.0</DOCTYPE_REVISION>
    <MSG_TYPE xmlns="">1</MSG_TYPE>
    <PAYLOAD xmlns="">XML payload</PAYLOAD>
    <ATTACHMENT xmlns=""/>
    </PayloadHeader>
    </Header>
    </b2bMsgHeader>

  • Trading partner agreement lookup failed as From trading partner cannot be i

    Hi,
    I am sending 850 EDI XML to our Penske trading partner, Its throwing below error. Could anyone helpme how to resolve this issue. Please do the needful.
    our sender id is EMR and receiver id is Penske( I am also attaching a file which i am processing)
    Machine Info: (essapt020-u009.emrsn.com)
    Description: Make sure the trading partner has name, type, and value information
    StackTrace:
    Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
         at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:199)
         at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
         at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1061)
         at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
         at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
         at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
    File which i processed
    <?xml version="1.0" ?>
    - <Transaction-850 xmlns="urn:oracle:integration:b2b:BD5A9C92A91F474292233E610E5258F9" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedDate="2009-09-14T06:20:48" CreatedBy="ECXEngine_837" GUID="{3A6795B0-F6A0-DE11-B354-00144F86C7D4}">
    - <Internal-Properties>
    - <Data-Structure Name="Interchange">
    <Lookup Name="InterchangeSenderQual">ZZ</Lookup>
    <Lookup Name="InterchangeSenderID">EMR</Lookup>
    <Lookup Name="InterchangeReceiverQual">ZZ</Lookup>
    <Lookup Name="InterchangeReceiverID">Penske</Lookup>
    <Lookup Name="InterchangeControlVersion">00401</Lookup>
    <Lookup Name="Standard">X12</Lookup>
    <Property Name="InterchangeAuthorizationInfoQual">00</Property>
    <Property Name="InterchangeAuthorizationInfo" />
    <Property Name="InterchangeSecurityInfoQual">00</Property>
    <Property Name="InterchangeSecurityInfo" />
    <Property Name="InterchangeSenderQual">ZZ</Property>
    <Property Name="InterchangeSenderID">EMR</Property>
    <Property Name="InterchangeReceiverQual">ZZ</Property>
    <Property Name="InterchangeReceiverID">Penske</Property>
    <Property Name="InterchangeDate">090909</Property>
    <Property Name="InterchangeTime">1419</Property>
    <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property>
    <Property Name="InterchangeControlVersion">00401</Property>
    <Property Name="InterchangeControlNumber">000085390</Property>
    <Property Name="InterchangeAckRequested">0</Property>
    <Property Name="InterchangeUsageIndicator">P</Property>
    <Property Name="InterchangeComponentElementSep">0x3e</Property>
    <Property Name="DecimalSeparator" />
    <Property Name="ElementDelimiter">0x2a</Property>
    <Property Name="ReleaseCharacter" />
    <Property Name="RepeatingSeparator" />
    <Property Name="SegmentDelimiter">0x7e</Property>
    <Property Name="SubelementDelimiter">0x3e</Property>
    <Property Name="InterchangeChildCount">1</Property>
    <Property Name="InterchangeTrailerControlNumber">000085390</Property>
    - <Data-Structure Name="Group">
    <Lookup Name="GroupSenderID">EMR</Lookup>
    <Lookup Name="GroupReceiverID">Penske</Lookup>
    <Lookup Name="GroupVersionNumber">004010</Lookup>
    <Property Name="GroupID">PO</Property>
    <Property Name="GroupSenderID">EMR</Property>
    <Property Name="GroupReceiverID">Penske</Property>
    <Property Name="GroupDate">20090909</Property>
    <Property Name="GroupTime">1419</Property>
    <Property Name="GroupControlNumber">85364</Property>
    <Property Name="GroupAgencyCode">X</Property>
    <Property Name="GroupVersionNumber">004010</Property>
    <Property Name="GroupChildCount">1</Property>
    <Property Name="GroupTrailerControlNumber">85364</Property>
    - <Data-Structure Name="Transaction">
    <Lookup Name="TransactionID">850</Lookup>
    <Property Name="TransactionID">850</Property>
    <Property Name="TransactionControlNumber">0001</Property>
    <Property Name="TransactionImplementationReference" />
    <Property Name="TransactionChildCount">24</Property>
    <Property Name="TransactionTrailerControlNumber">0001</Property>
    </Data-Structure>
    </Data-Structure>
    </Data-Structure>
    </Internal-Properties>
    - <Segment-ST>
    <Element-143>850</Element-143>
    <Element-329>0001</Element-329>
    </Segment-ST>
    - <Segment-BEG>
    <Element-353>00</Element-353>
    <Element-92>SA</Element-92>
    <Element-324>16010055985</Element-324>
    <Element-328 xsi:nil="true" />
    <Element-373>20090909</Element-373>
    <Element-367 xsi:nil="true" />
    <Element-587>AC</Element-587>
    <Element-1019 xsi:nil="true" />
    <Element-1166 xsi:nil="true" />
    <Element-1232 xsi:nil="true" />
    <Element-786>03</Element-786>
    </Segment-BEG>
    - <Segment-CUR>
    <Element-98>2L</Element-98>
    <Element-100>USD</Element-100>
    </Segment-CUR>
    - <Segment-REF>
    <Element-128>06</Element-128>
    <Element-127 xsi:nil="true" />
    <Element-352>ALICE.EMRSN.COM:oracle.apps.po.event.xmlpo:458153-325924</Element-352>
    </Segment-REF>
    - <Segment-FOB>
    <Element-146>CC</Element-146>
    <Element-309>ZZ</Element-309>
    <Element-352>UCC FOB DEST COL</Element-352>
    <Element-334 xsi:nil="true" />
    <Element-335 xsi:nil="true" />
    <Element-309_1>ZZ</Element-309_1>
    <Element-352_1>FOB Shipping Point</Element-352_1>
    </Segment-FOB>
    - <Segment-ITD>
    <Element-336 xsi:nil="true" />
    <Element-333 xsi:nil="true" />
    <Element-338 xsi:nil="true" />
    <Element-370 xsi:nil="true" />
    <Element-351 xsi:nil="true" />
    <Element-446 xsi:nil="true" />
    <Element-386 xsi:nil="true" />
    <Element-362 xsi:nil="true" />
    <Element-388 xsi:nil="true" />
    <Element-389 xsi:nil="true" />
    <Element-342 xsi:nil="true" />
    <Element-352>NET75 EOM</Element-352>
    </Segment-ITD>
    - <Loop-N1>
    - <Segment-N1>
    <Element-98>VN</Element-98>
    <Element-93>XPEDX</Element-93>
    <Element-66>US</Element-66>
    <Element-67>160000511</Element-67>
    </Segment-N1>
    - <Segment-N3>
    <Element-166>2099 CORPORATE 44 DRIVE</Element-166>
    </Segment-N3>
    - <Segment-N4>
    <Element-19>FENTON</Element-19>
    <Element-156>MO</Element-156>
    <Element-116>63026</Element-116>
    <Element-26>US</Element-26>
    </Segment-N4>
    </Loop-N1>
    - <Loop-N1>
    - <Segment-N1>
    <Element-98>BT</Element-98>
    <Element-93>EMC OU CIM</Element-93>
    </Segment-N1>
    - <Segment-N3>
    <Element-166>Emerson Motor Company,</Element-166>
    <Element-166_1>a Division of Emerson Electric Co. PO BOX 4147</Element-166_1>
    </Segment-N3>
    - <Segment-N4>
    <Element-19>Saint Louis</Element-19>
    <Element-156>MO</Element-156>
    <Element-116>63136</Element-116>
    <Element-26>US</Element-26>
    </Segment-N4>
    </Loop-N1>
    - <Loop-N1>
    - <Segment-N1>
    <Element-98>SO</Element-98>
    <Element-93>EMC OU CIM</Element-93>
    </Segment-N1>
    - <Segment-N3>
    <Element-166>8100 West Florissant Ave</Element-166>
    <Element-166_1>PO Box 3946</Element-166_1>
    </Segment-N3>
    - <Segment-N4>
    <Element-19>Saint Louis</Element-19>
    <Element-156>MO</Element-156>
    <Element-116>63136</Element-116>
    <Element-26>US</Element-26>
    </Segment-N4>
    </Loop-N1>
    - <Loop-N1>
    - <Segment-N1>
    <Element-98>CA</Element-98>
    <Element-93>SEE EMERSON ROUTING</Element-93>
    </Segment-N1>
    </Loop-N1>
    - <Loop-PO1>
    - <Segment-PO1>
    <Element-350>1</Element-350>
    <Element-330>4800</Element-330>
    <Element-355_1>EA</Element-355_1>
    <Element-212>116</Element-212>
    <Element-639 xsi:nil="true" />
    <Element-235_1 xsi:nil="true" />
    <Element-234_1 xsi:nil="true" />
    <Element-235_2>SW</Element-235_2>
    <Element-234_2>P062155530000</Element-234_2>
    </Segment-PO1>
    - <Loop-PID>
    - <Segment-PID>
    <Element-349>F</Element-349>
    <Element-750 xsi:nil="true" />
    <Element-559 xsi:nil="true" />
    <Element-751 xsi:nil="true" />
    <Element-352>PAD (BOX)</Element-352>
    </Segment-PID>
    </Loop-PID>
    - <Loop-N1_2>
    - <Segment-N1>
    <Element-98>ST</Element-98>
    <Element-93>CIM IO Plant CMD</Element-93>
    <Element-66>FA</Element-66>
    <Element-67>INTERNALC01</Element-67>
    </Segment-N1>
    - <Segment-N3>
    <Element-166>Boul Carlos Salinas de Gortari</Element-166>
    <Element-166_1>Kilometro 9.7</Element-166_1>
    </Segment-N3>
    - <Segment-N4>
    <Element-19>Apodaca</Element-19>
    <Element-156>NL</Element-156>
    <Element-116>66600</Element-116>
    <Element-26>MX</Element-26>
    </Segment-N4>
    - <Segment-SCH>
    <Element-380_2>4800</Element-380_2>
    <Element-355>EA</Element-355>
    <Element-98_1 xsi:nil="true" />
    <Element-93 xsi:nil="true" />
    <Element-374_5>112</Element-374_5>
    <Element-373>20090910</Element-373>
    <Element-337 xsi:nil="true" />
    <Element-374 xsi:nil="true" />
    <Element-373_1 xsi:nil="true" />
    <Element-337_1 xsi:nil="true" />
    <Element-326 xsi:nil="true" />
    <Element-350>1</Element-350>
    </Segment-SCH>
    </Loop-N1_2>
    </Loop-PO1>
    - <Loop-CTT>
    - <Segment-CTT>
    <Element-354>1</Element-354>
    </Segment-CTT>
    </Loop-CTT>
    - <Segment-SE>
    <Element-96>24</Element-96>
    <Element-329>0001</Element-329>
    </Segment-SE>
    </Transaction-850>

    Hi Srinivas,
    I am in dilemaaa whether i need to take a EDI x12 over internet and EDI x12 over genric exchange.I think this is something which you should discuss with your TP and as per the availability and requirement a decision should be made.
    If you are using FTP protocol in internal delivery channel, then you need to follow the file naming convention to provide B2B required information to identify the TP and transaction. For this please refer -
    http://www.b2bgurus.com/search/label/Generic%20File
    To know more about TP identification in EDI, please refer -
    http://www.b2bgurus.com/2007/08/trading-partner-identification-in-edi.html
    Regards,
    Anuj

  • Trading partner agreement lookup failed as From trading partner cannotbeide

    Machine Info: (essapt020-u009.emrsn.com)
    Description: Make sure the trading partner has name, type, and value information
    StackTrace:
    Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
         at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:199)
         at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
         at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1061)
         at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
         at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
         at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
    I am getting an above error, while procssing data to our trading partner
    regards
    srinivas

    Hi Srinivas,
    I think you have one more thread opened for the same -
    Trading partner agreement lookup failed as From trading partner cannot be i
    Anyways, as I mentioned earlier in above thread, please follow proper file naming convention to allow B2B to identify the Trading Partner.
    Regards,
    Anuj

  • The app store got delted from my iphone by mistake

    the app store got delted from my iphone by mistake. how can i get it back on my phone?

    It can't be deleted. Only restricted. Check in Settings > General > Restrictions, make sure Installing Apps did not get turned off.

  • Delta from legacy system(SQL Server)

    hi gurus,
    i am trying to load data from  3rd party system.
    can you tell me the ways how to load daily data into BW using <b>Delta update</b>..
    advance thanx for the help..
    with rgds/Loknath

    Hi Loknath,
    Where are you loading the data ( Cube Or ODS). I think better if you load into ODS and then to Cube or use Data Mart. But if you want to control the delta from SQL Server itself  then i doubt if i know any way to do that.
    Experts , please throw your thoughts to do this.
    hope this helps.
    San.

  • How do the application servers connect the new database after failing over from primary DB to standby DB

    How do the application servers connect the new database after failing over from primary DB to standby DB?
    We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
    When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround. 
    Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
    Oracle support provides us the answer as following:
    ==================================================================
    Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
    After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
    Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
    JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
    FAN server-side callouts can be configured on the database tier.
    FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
    =======================================================================================
    Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
    Thank very much in advance.

    Hi mesbeg,
    Thanks alot.
    For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
            <subsystem xmlns="urn:jboss:domain:datasources:1.0">
            <datasources>
                    <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                        <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                        <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                        <driver>oracle</driver>
                        <pool>
                            <min-pool-size>2</min-pool-size>
                            <max-pool-size>10</max-pool-size>
                            <prefill>true</prefill>
                        </pool>
                        <security>
                            <user-name>TEST_USER</user-name>
                            <password>Password1</password>
                        </security>
                        <validation>
                            <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                            <validate-on-match>false</validate-on-match>
                            <background-validation>false</background-validation>
                            <use-fast-fail>false</use-fast-fail>
                            <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                            <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                        </validation>
                    </datasource>
                    <drivers>
                        <driver name="oracle" module="com.oracle.jdbc">
                            <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                        </driver>
                    </drivers>
                </datasources>
            </subsystem>
    If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

  • Filter failed message from printer

    I get the filter failed message from printer - an Epsom 387.
    It has worked wirelessly for over a year - today it will not.

    For my
    Epson Stylus Photo PX720WD
    I found downloading
    * Mac OS X Common Updater (v8.0) 12-May-2011 36.94 MBs *
    With the Mac OS X Common Updater you keep your printer drivers always up to date
    Very very helpful......
    YOU CAN FIND IT AT
    http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/support/10 840
    it worked straight away.. i hope it helps you also.

  • Can HA-Oracle agent distinguish a failed database from an inactive one?

    I read "Oracle and Sun Cluster:A technical Overview" by Joseph Bianco. It says "The HA-Oracle agent can distinguish a failed database from an inactive one".
    How do we configure HA-Oracle agent to be smart enough to distinguish normal shutdown (due to cold backup, or other maintainence purpose) and a failed database? So, it should not automatically start up database at the other node for normal shutdown operations.
    Thanks,
    Shuhsin

    The default behaviour is to consider the service down if the database
    is not online. But you can change this behaviour. For more info see
    The Sun Cluster 3.1 Dataservice for Oracle Guide
    http://docs.sun.com/db/doc/817-3306
    There are several ways to handle this scenario, including disabling
    the fault monitor during backups or maintenance. I'm not sure there
    is a generic, best way, so you should consider a solution based on your
    requirements.
    -- richard

  • Short Dump while loading Delta from ODS to ODS

    Hi Experts,
    I have run into a short dump error while loading delta from one ODS to another via a process chain.
    Following is the error message:
    Error analysis                                                                               
    Short text of error message:                                                                 
        Request 0000259294 is not completely activated. Please activate it again                     
    Technical information about the message:                                                     
         Diagnosis                                                                               
    Activation of request 0000259294 has terminated, or is not yet                          
             complete.                                                                               
    System response                                                                               
    Procedure                                                                               
    If the process has terminated, all of the requests that the system                      
             was unabe to activate in the most recent activation process have to                     
             be reactivated before the new requests can be activated.                                
             If you are not able to carry out this activation step, delete the                       
             relevant requests from the administration of the ODS object (on the                     
             Requests tabstrip).                                                                     
         Procedure for System Administration                                                         
        Message classe...... "RSM1"                                                                  
        Number.............. 180                                                                     
        Variable 1.......... 0000259294                                                              
        Variable 2.......... " "                                                                     
        Variable 3.......... " "                                                                     
        Variable 4.......... " "                                                                     
        Variable 3.......... " "                                                                     
        Variable 4.......... " "                                                                     
    Can someone help me resolve this?
    Thank you

    Check the status of request SID 259294  in ODS, whether the Activation got completed or not. If not wait till the activation completes.
    If there is any problem in the activation process, correct that complete the activation process and load the ne request that you want to load..
    Regards
    VJ

  • TCS fails recording from MCU

    Hi all,
    I found TCS fails recording from MCU when I use 2 Byte characters for MCU H.323 ID.
    (Home > Settings > H.323  >(Mandatory) H.323 ID to register )
    In that case, we can call and record conferences when we call MCU from TCS using conference's E.164 number.
    But we can't record conferences when we call TCS from MCU using TCS's E.164 number.
    (During failed recording, TCS outputs error log "Error: Calling stored procedure, Stored procedure error occurred [stored_procedure_error = XML parsing: line 1, character 66, whitespace expected] - Continuing")
    This issue can be resolved simply excluding 2 Byte characters from H.323 ID of MCU.
    But our customer needs to use 2 Byte characters, so is there any way to do so?
    VCS-C   X8.2.1
    TCS v6.0
    MCU5310 4.5(1.45)
    Best Regards,
    Kotaro

    I think I get it now. The hype. Not the scary hype. Not the news articles that say attendees should only use pencil and paper or “burner phones.” What is this, The Wire? I looked all over for Marlo and Stringer and Fuzzy Dunlop and didn’t see them anywhere.What I did see was a killer keynote that made the kind of sense we rarely see in mass media. I saw technical presentations that simultaneously put my mind at ease and made me wary of what is inevitably around the corner. I saw a couple of sessions that were pretty dull but also packed with the kind of important information that will change my behavior once I get back out in The World (especiallyhow I treat my Mac… you know… because nobody hacks Macs, right?)The amazing part is that all of the diverse ideas I was exposed to today seemed to magically coalesce into a unified, albeit...

Maybe you are looking for