Failed disc
Hi,
Waking up this morning after leaving my white 2008 13" MacBook running last night, something had gone terribly wrong.
The Mac was frozen, and after rebooting I just got a few clicks from the HDD when booting up, and after a while a folder with a question mark on it which I assume means the the disc couldn't be found or is unreadable.
I took the disc out and inserted it again to make sure it was connected OK with no success.
I have had power issues with a completely dead battery (instant death if power cord is removed). With a little imagination it does sound like the disc tries do spin up but fails due to power issues. I've seen this before on computers lacking sufficient power (think 240W of PSU and too big video card).
So now to the question:
How do I access the BIOS-equivalent to check out if the Mac recognizes that there is a disc in there at all?
I have still to locate the disc, but I'll do this ASAP and let you know ...
I didn't know there is no BIOS in a Mac prior to this, so at least I gained some knowledge.
The whole disc crash have give me some sad side affects, so if anyone cares for reading about my disc crash-related miseries, go ahead and read about my iTunes issue ...
Similar Messages
-
Updated itunes to 12.1 and can't burn playlist. Error "attempt to burn disc failed, disc cannot be read or written to" have tried every troubleshooting solution to no avail. please help!
Greetings akite2high,
If you are having an issue with being unable to burn a CD using iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article -
Can't burn a CD in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
Alert for failed disc in RAID array
is there a third party software that will alert when a disc in a raid array is degraded or failed? right now, i have to open raid utility to see this. i would like to get a small alert so i can replace the disc quickly.
any ideas welcome.
thanksSoftRAID http://www.softraid.com
I think there is something like <aa href=http://www.macupdate.com/search.php?arch=all&keywords=RAID&os=macosx> "RAID monitor"
( not rocket science )
Search http://www.macupdate.com
(as well as the usually news, tip, sites) on reports of how well it WORKS and for sending email alerts etc even.
There should be entries in system log of repeated I/O requests and failures, and look for attempts to reassign bad blocks as well. -
Compressor fails, disc full message
10.5, Intel dt,
Got 3 small 2gb 10 min movies, QT, 1080i 1440x1080 ( anamorphic ). made a custom preset to simply de-interlace the movies and make them progressive, nothing else. The destination is an internal disc with 179gb free. The boot disc has 10 gb free and I've set compressor's presets to NOT copy files to cluster during processing yet compressor fails the job each time even trying one movie at a time, saying my HD is almost full.
Cant work it out? Any ideas?
PeterIf your system HD has less than 10% free space it could contribute to odd operating issues.
Click on the preset and look at the far left box near the top of the inspector window. How big does it say the file should be? What was this preset made from?
Could the preset you started with be a factor? -
"The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media."
I am getting this message when trying to burn to Maxell CD-R 80min 700MB cd's. I have slowed the burn speed down to 1x, and I guess I can experiment with burn speeds, but I've never had this problem before. Any comments on Maxell CD's? Any suggestions for best "Preferred Burn Speed" setting?Burning a data CD is not a problem. It seems to be some kind of function involving the brand of CD and the burn speed. It just stinks to drop $10-$20 on a stack of CD's to find that they don't work, or at least not very well. Also disturbing is having one brand work and not another.
(I guess I'm still stinging from the iTunes "upgrade" (v7?) that caused my faithful iMac G3 graphite to loose the ability to burn CD's altogether. I love my mac's, but Apple tests my loyalty when they make decent older machines obsolete. Now they are making my iBook G4 obsolete. Grrrrrrrrrrrrrrrrrrrrr!)
I should not need to spend money on other software (e.g. Roxio) to do something as simple as burn a CD in the bragged about iTunes. $1,500 ought to buy me that. -
DIAGNOSTICS
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation VGN-S360
iTunes 7.2.0.35
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
ATI MOBILITY RADEON 9700
MOBILITY RADEON 9200
Connected Device Information:
DiskDrive, MemoryStick or MemoryStickPro Device, Bus Type SSA
DiskDrive, FUJITSU MHT2080AT, Bus Type ATA, Bus Address [0,0]
CDROM, MATSHITA UJDA765aDVD/CDRW, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: MATSHITA UJDA765aDVD/CDRW, Rev 1.00
Audio CD in drive.
Found 15 songs on CD, playing time 69:01 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:33:15
Track 3, start time 07:50:65
Track 4, start time 13:19:07
Track 5, start time 17:07:73
Track 6, start time 20:35:36
Track 7, start time 25:05:29
Track 8, start time 33:11:44
Track 9, start time 37:44:71
Track 10, start time 42:35:13
Track 11, start time 46:24:19
Track 12, start time 49:47:65
Track 13, start time 55:25:34
Track 14, start time 60:10:55
Track 15, start time 64:15:63
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24.
The drive CDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: MATSHITA UJDA765aDVD/CDRW on CDR media at speed 16X.
~~~
I would appreciate an answer, since some older posts on this subject have been met with impolite and dismissive responses. If anyone has anything constructive to add, please post in response.
Sony VAIO Windows XPHad trouble posting entire messaage on first attempts. Hopes this works for you. Pardon if this is a duplication.
I got an Error 4261 message on my computer some months ago while attempting to backup my iTunes music ---about Dec. 2006. Hopefully, the problem is now solved. This was a difficult and time consuming issue to resolve. I shall provide some details of this resolution (worked for me) as I know some others are having the same problem. I hope to post this message to others with 4261 errors.
I have a Dimension E510 computer bought in 2006. I am using Windows XP. My CD ROM burner is as follows: HL-DT-ST DVD +-RW GWA4164B. I wonder if you have the same type CD ROM.
At first, several thoughts came to mind. Google? Never listen to music again. Invest in a sledge hammer? I decided to try and fix the problem and would work on this for the next eight months. Recently, I decided that this problem had to go away. I tried various things to correct the problem often with technical assistance as the following indicate:
Changed copy speed//Did a restore on my computer (no help)// reversed restore
Updated iTunes files//Did virus scans
Contacted a company techie—Discovered my warranty was still good. Cdrom driver was updated. We got the iTunes program to copy a disk. Problem solved?? Time passes.
The problem reoccurs. I contacted a techie again. He was able to get another program to copy on the cdrom I was using to copy iTunes music. I was told that I should contact an iTunes rep. $$. (One can save files (ex. photos) to a new file created on the desk top and copy them to a cdrom---a test method used.)
I read suggestions about updating my BIOS and chipset on the iTunes message board. Not being a techie I wasn’t so sure about this. Time passes.
I didn’t buy music.
I read messages saying that I should backup my iTunes music.
Called techie again. Updated cdrom driver. We were able to copy data using the same cdrom used for the iTunes copy. (Again this was not a fix. It was indicative of an intermittent cdrom failure occurring over time, and one manifesting itself in iTunes.) I asked him to try to copy another. Amazingly, this copy failed. Something was wrong. Now we’re getting somewhere. Techie eliminated select startup files to try to determine source of a software error, if one. This did not fix the problem.
Techie deleted a couple registry files. (I don’t like deleting registry files because they serve a valuable purpose, but I’ not a techie. Later I would have to do a file repair on iTunes and a photo program. iTunes has a repair feature which was on my desktop—a holdover from a previous attempt to fix things with an iTunes update. I ran this without harming my music files, and this repaired the program.)
Techie said I may have a problem with my current brands of CD-R disks. I bought and tried other brands---four all total. This did not work.
I happened to attempt to copy some pictures as I was interested in having some developed. To my surprise, my computer stopped the copy citing an error with the copy process. The problem now manifested itself with another software program. Heretofore, I could successfully copy pictures using the same cdrom but not iTunes music.
I called the techie again. I told him what I had done and new error in copying other files to the cdrom. We attempted to use other programs to copy music and picture files on the cdrom. (My thinking is, if they had worked, then the cdrom was OK, and the problem was a software problem and likely involving iTunes.) We could not get any software programs to copy files to the cdrom in question. This was a clear indication that the cdrom was defective. We likely used up ten CD-R disks in these latest attempts.
Looking back, there was a subtle indication of a problem with the cdrom. There was a problem with one of the songs I had copied to a new disk (No. 24 of 24 songs on a disk). The song was copied with errors. This shouldn’t happen.
The company replaced cdrom free of charge the next morning. Wow!
I tried the new cdrom and began burning iTunes music right away. No 4261 error message. I also copied pictures to the same cdrom without any error messages. I also successfully used other brands of CD-R disks.
Replacing the cdrom on my computer fixed the 4261 error on my computer. I hope something here will be of help to some of you who have the same problem.
As I mentioned earlier I had problems with iTunes and a photo program after cdrom installation but fixed them. I also experienced problems with Windows Media Player and Roxio/Sonic. They didn’t want to recognize the new drive (E:). Restore made things worst so I undid this. I spoke to a tech again about these issues as I wasn’t certain of the scope/nature of problem. We updated both programs with updates from company support pages. This seems to have fixed the problem. Point made here was the need to keep files updated with the latest and greatest. Having had Windows ME in the past, I was reluctant to change my files too often. Now I have no choice but to do this. Many thanks to Techie.
The thought in my mind now is whether performing updates and specifically on Windows Media Player would have fixed the error to begin with. I don’t know, but I did run an update on my iTunes, and there are no updates for my photo program . Looking back I would have tried the updates first before I replaced the cdrom.
Kindest regards. 08/13/07 -
Failed root.sh on 1st Node of 11.2.0.2.0 RAC on HP-UX 11.31 Itanium 64
Started with 11.2.0.2.0 Grid Installation for 2 Node RAC on HP-UX 11.31 Itanium 64.
Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
*/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed*
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [ AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [ AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [ AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [ AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[ CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [ CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [ CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [ CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
ManishThanks Sebastian for your input.
yes. my lan2 is used for Cluster_interconnect which is having subnet 255.255.255.240.
Below are IPs used for RAC
Public
Node1: 10.10.1.173/255.255.240.0
Node2: 10.10.1.174/255.255.240.0
Private
Node1: 10.10.16.50/255.255.255.240
Node2: 10.10.16.51/255.255.255.240
Virtual
Node1: 10.10.1.191/255.255.240.0
Node2: 10.10.1.192/255.255.240.0
SCAN (Defined in DNS)
10.10.1.193/255.255.240.0
10.10.1.194/255.255.240.0
10.10.1.195/255.255.240.0
As you said, I will scrap GI Software again & will try with 255.255.255.0.
I Believe this Redundant Interconnect and ora.cluster_interconnect.haip present in 11.2.0.2.0 Version.
Oracle says:
Redundant Interconnect without any 3rd-party IP failover technology (bond, IPMP or similar) is supported natively by Grid Infrastructure starting from 11.2.0.2. Multiple private network adapters can be defined either during the installation phase or afterward using the oifcfg. Oracle Database, CSS, OCR, CRS, CTSS, and EVM components in 11.2.0.2 employ it automatically.
Grid Infrastructure can activate a maximum of four private network adapters at a time even if more are defined. The ora.cluster_interconnect.haip resource will start one to four link local HAIP on private network adapters for interconnect communication for Oracle RAC, Oracle ASM, and Oracle ACFS etc.
Grid automatically picks link local addresses from reserved 169.254.*.* subnet for HAIP, and it will not attempt to use any 169.254.*.* address if it's already in use for another purpose. With HAIP, by default, interconnect traffic will be load balanced across all active interconnect interfaces, and corresponding HAIP address will be failed over transparently to other adapters if one fails or becomes non-communicative. .
The number of HAIP addresses is decided by how many private network adapters are active when Grid comes up on the first node in the cluster . If there's only one active private network, Grid will create one; if two, Grid will create two; and if more than two, Grid will create four HAIPs. The number of HAIPs won't change even if more private network adapters are activated later, a restart of clusterware on all nodes is required for new adapters to become effective.
In my Setup, I am having Teaming for NIC's for Public & Private Interface. So I am thinking to break teaming of NICs because HAIP internally searching for next available NIC & not getting as all 4 are already in used with OS level NIC teaming.
My only Concern is, as I am going to change subnet for the Private IPs, should I change Private IP address ????
Thanks for the Support...
Regards,
Manish -
Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64
Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
ManishStarted with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [ AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [ AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [ AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [ AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[ CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [ CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [ CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [ CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish -
IDVD ejects disc during burning process of Dual Layer DVD
Hi,
I am trying to burn a 3hr iMovie project of a recent holiday trip. Due to its size, it therefore needs to go on a Dual Disc DVD. I intend to burn 8 copies, one for each member of the holiday.
I successfully burned the first disc in iDVD, however since then, the disc prematurely ejects at the "Multiplexing and Burning" stage, (At the 'Writing Lead In' stage within this) ,usually with 31mins remaining
I am burning at 4x , I have 27GB free space and I am using AONE Plus DVDs. I have read many discussions on here about buying Verbatim DVD-R's which i can do, but with the first dvd burning successfully, I would prefer to try other options before I commit to purchase..
Thanks in advance for any help you can give me
MaxHi again,
I purchased a pack of Verbatim DVD-R DL Discs, tried the iDVD route and it ejected at the burning and multiplexing stage again. Not only this, but after burning and trying that same failed disc again, it actually contains part of the project, so this disc is now unusable.
After this I went the Disc Utility option as you advised and successfully got to the end until the 'closing session' section. Here, it continues to load and says it is 'closing the session' and i can hear my Disc drive spinning away, stopping, then starting to spin again (this continues to happen forever and ever)
Any suggestions at this stage would be great as i'm truly at a lost cause now..
Thanks
Max -
IDvd Problems - ejects disc blank
Hi
I have been trying loads of different solutions to this problem. Basically each time my computer gets to multiplexing and burning it ejects the disc (blank still) and stays on that screen for hours! It is so frustrating. I have tried burning the movie as a disc image and burning that through disk utility and it comes up: could not burn disk. I have tried a different disk and it doesnt move from 'closing session' PLEASE HELP!Hi again,
I purchased a pack of Verbatim DVD-R DL Discs, tried the iDVD route and it ejected at the burning and multiplexing stage again. Not only this, but after burning and trying that same failed disc again, it actually contains part of the project, so this disc is now unusable.
After this I went the Disc Utility option as you advised and successfully got to the end until the 'closing session' section. Here, it continues to load and says it is 'closing the session' and i can hear my Disc drive spinning away, stopping, then starting to spin again (this continues to happen forever and ever)
Any suggestions at this stage would be great as i'm truly at a lost cause now..
Thanks
Max -
Attempt to copy failed message
when i try to synch my ipod after a minute or two i get a message that says- attempt to copy to phils ipod failed. disc could not be read from or written to. my partner has an ipod too (we bought them at the same time- last wednesday)that is giving her the same message when she attempts to synch it. what can we do, and to be honest i'm a whisker away from taking it back to the shop cos its just been one thing after another and its only been a week!
Have you seen this?:
"Disk cannot be read from or written to" when syncing iPod
-Kylene -
11gR2 Cluster node does not start, start of ora.gipcd fails
Hi
I have a clusert node which just does not start, and i do know understand what the problem is.
Does anyone have an idea what the problem cound be?
I am using Oracle 11.2.0.1.0 on OEL.
I appreciate any help, thank you.
Regards Bernhard
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE OFFLINE
ora.crsd
1 ONLINE INTERMEDIATE node001
ora.cssd
1 ONLINE OFFLINE
ora.cssdmonitor
1 ONLINE OFFLINE
ora.ctssd
1 ONLINE OFFLINE
ora.diskmon
1 ONLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE node001
ora.evmd
1 ONLINE OFFLINE
ora.gipcd
1 ONLINE OFFLINE
ora.gpnpd
1 ONLINE OFFLINE
ora.mdnsd
1 ONLINE ONLINE node001 alertnode001.log
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2012-06-29 08:43:52.511
[/opt/grid/product/11gR2/grid/bin/cssdmonitor(5144)]CRS-5822:Agent '/opt/grid/product/11gR2/grid/bin/cssdmonitor_root' disconnected from server. Details at (:CRSAGF00117:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdmonitor_root/oracssdmonitor_root.log.
2012-06-29 08:48:49.713
[ohasd(4346)]CRS-2112:The OLR service started on node node001.
2012-06-29 08:48:50.010
[ohasd(4346)]CRS-8017:location: /etc/oracle/lastgasp has 50 reboot advisory log files, 0 were announced and 0 errors occurred
2012-06-29 08:48:55.134
[ohasd(4346)]CRS-2772:Server 'node001' has been assigned to pool 'Free'.
[client(4634)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
[client(4652)]CRS-10001:ACFS-9322: done.
2012-06-29 08:50:59.362
[ohasd(4346)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.oracssdmonitor_root.log
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2012-06-29 08:48:51.003: [ AGFW][1810312288] Starting the agent: /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdmonitor_root/
2012-06-29 08:48:51.003: [ AGENT][1810312288] Agent framework initialized, Process Id = 4414
2012-06-29 08:48:51.003: [ USRTHRD][1810312288] to enter agent main
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_main: setting priority to 4
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] *** Agent Framework Started ***
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_vmondisv: Compatible vendor clusterware not in use
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_thrdspawn: spawn OMON succ
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_main: spawn omon succ
2012-06-29 08:48:54.939: [ USRTHRD][1098914112] clsnomon_main: default values for omon, initrate 1000, pollrate 500.
2012-06-29 08:48:54.939: [ USRTHRD][1098914112] clsnomon_main: starting omon
2012-06-29 08:48:54.942: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
2012-06-29 08:48:54.942: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29
2012-06-29 08:48:55.041: [ AGFW][1810312288] SERVER IPC CONNECT STR: (ADDRESS=(PROTOCOL=IPC)(KEY=OHASD_IPC_SOCKET_11))
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] Inited lsf context 0x1ae1cdd0
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] Initing CLS Framework messaging
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] New Framework state: 2
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] M2M is starting...
2012-06-29 08:48:55.047: [ CRSCOMM][1810312288] m_pClscCtx=0x1ae21d70m_pUgblm=0x1ae754b0
2012-06-29 08:48:55.047: [ CRSCOMM][1810312288] Starting send thread
2012-06-29 08:48:55.052: [ CRSCOMM][1119893824] clsIpc: sendWork thread started.
2012-06-29 08:48:55.057: [ CRSCOMM][1130383680] IPC Client thread started listening
2012-06-29 08:48:55.057: [ CRSCOMM][1130383680] init data sent from server
2012-06-29 08:48:55.057: [CLSFRAME][1810312288] New IPC Member:{Relative|Node:0|Process:0|Type:2}:OHASD:node001
2012-06-29 08:48:55.058: [CLSFRAME][1810312288] New process connected to us ID:{Relative|Node:0|Process:0|Type:2} Info:OHASD:node001
2012-06-29 08:48:55.066: [CLSFRAME][1810312288] Starting thread model named: MultiThread
2012-06-29 08:48:55.073: [CLSFRAME][1810312288] Starting thread model named: SingleThread
2012-06-29 08:48:55.076: [CLSFRAME][1810312288] Starting thread model named: SingleThreadT
2012-06-29 08:48:55.080: [CLSFRAME][1810312288] New Framework state: 3
2012-06-29 08:48:55.080: [ AGFW][1810312288] Agent Framework started successfully
2012-06-29 08:48:55.080: [ AGFW][1182832960] Agfw engine module has enabled...
2012-06-29 08:48:55.080: [CLSFRAME][1182832960] Module Enabling is complete
2012-06-29 08:48:55.080: [CLSFRAME][1182832960] New Framework state: 6
2012-06-29 08:48:55.080: [ AGFW][1182832960] Agent is started with userid: root , expected user: root
2012-06-29 08:48:55.081: [ AGFW][1182832960] Agent sending message to PE: AGENT_HANDSHAKE[Proxy] ID 20484:14
2012-06-29 08:48:55.088: [ AGFW][1182832960] Agent received the message: RESTYPE_ADD[ora.cssdmonitor.type] ID 8196:299
2012-06-29 08:48:55.089: [ AGFW][1182832960] Added new restype: ora.cssdmonitor.type
2012-06-29 08:48:55.089: [ AGFW][1182832960] Agent sending last reply for: RESTYPE_ADD[ora.cssdmonitor.type] ID 8196:299
2012-06-29 08:48:55.090: [ AGFW][1182832960] Agent received the message: RESOURCE_ADD[ora.cssdmonitor 1 1] ID 4356:301
2012-06-29 08:48:55.090: [ AGFW][1182832960] Added new resource: ora.cssdmonitor 1 1 to the agfw
2012-06-29 08:48:55.091: [ AGFW][1182832960] Agent sending last reply for: RESOURCE_ADD[ora.cssdmonitor 1 1] ID 4356:301
2012-06-29 08:48:55.091: [ AGFW][1182832960] Agent received the message: RESOURCE_PROBE[ora.cssdmonitor 1 1] ID 4097:302
2012-06-29 08:48:55.091: [ AGFW][1182832960] Preparing CHECK command for: ora.cssdmonitor 1 1
2012-06-29 08:48:55.096: [ AGFW][1172343104] Executing command: check for resource: ora.cssdmonitor 1 1
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr OMON_INITRATE, value 1000
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr OMON_POLLRATE, value 500
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr ORA_OPROCD_MODE, value
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr PROCD_TIMEOUT, value 1000
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr LOGGING_LEVEL, value 1
2012-06-29 08:48:55.096: [ AGFW][1172343104] check for resource: ora.cssdmonitor 1 1 completed with status: OFFLINE
2012-06-29 08:48:55.096: [CRSTIMER][1203812672] Timer Thread Starting.
2012-06-29 08:48:55.096: [ AGFW][1182832960] ora.cssdmonitor 1 1 state changed from: UNKNOWN to: OFFLINE
2012-06-29 08:48:55.096: [ AGFW][1182832960] Agent sending last reply for: RESOURCE_PROBE[ora.cssdmonitor 1 1] ID 4097:302
2012-06-29 08:48:55.096: [ AGFW][1182832960] Agent has no resources to be monitored.Sending suicide request.
2012-06-29 08:48:55.096: [ AGFW][1182832960] Agent sending message to PE: AGENT_SUICIDE[Proxy] ID 20486:28
2012-06-29 08:48:55.100: [ AGFW][1182832960] Agent received the message: RESOURCE_DELETE[ora.cssdmonitor 1 1] ID 4358:317
2012-06-29 08:48:55.100: [ AGFW][1182832960] Agent sending last reply for: RESOURCE_DELETE[ora.cssdmonitor 1 1] ID 4358:317
2012-06-29 08:48:55.100: [ AGFW][1182832960] Agent has no resources to be monitored.Sending suicide request.
2012-06-29 08:48:55.100: [ AGFW][1182832960] Agent sending message to PE: AGENT_SUICIDE[Proxy] ID 20486:34
2012-06-29 08:48:55.101: [ AGFW][1182832960] ora.cssdmonitor 1 1 marked as deleted.
2012-06-29 08:48:55.101: [ AGFW][1182832960] Deleting the resource: ora.cssdmonitor 1 1
2012-06-29 08:48:55.101: [ AGFW][1182832960] Agent is commiting suicide.
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_exit: CSSD Agent was asked to exit with exit code 1
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_becomeactive: Signaling active state
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_term: still threads up (1)
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_exit: Agent is done.
2012-06-29 08:48:55.101: [ AGFW][1182832960] Agent is exiting with exit code: 1
2012-06-29 08:48:55.947: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
2012-06-29 08:48:55.947: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29
2012-06-29 08:48:56.952: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
2012-06-29 08:48:56.952: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29Edited by: Bernhard W on 03-Jul-2012 02:14I am really getting desperate about this.
The ASM persmissions are on both nodes the same, so this should not be the problem and i can not find any problem on the network.
The log files of the healthy node do not say anything about the node which does not startup now, the last log entry was from 6 months ago, when i shut that node down. There seems to be no communication between the two nodes now.
I tried to manually start the ora.cssd but somehow ora.gipcd just does not start and i can not find the problem.
[oracle@dmrs11srvcla001 ~]$ crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE OFFLINE
ora.crsd
1 ONLINE INTERMEDIATE dmrs11srvcla001
ora.cssd
1 ONLINE OFFLINE
ora.cssdmonitor
1 ONLINE ONLINE dmrs11srvcla001
ora.ctssd
1 ONLINE OFFLINE
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE dmrs11srvcla001
ora.evmd
1 ONLINE OFFLINE
ora.gipcd
1 ONLINE OFFLINE
ora.gpnpd
1 ONLINE OFFLINE
ora.mdnsd
1 ONLINE ONLINE dmrs11srvcla001
[oracle@dmrs11srvcla001 ~]$ crsctl start res ora.cssd -init
CRS-2672: Attempting to start 'ora.gipcd' on 'dmrs11srvcla001'
Start action for daemon aborted
CRS-2674: Start of 'ora.gipcd' on 'dmrs11srvcla001' failed
CRS-2679: Attempting to clean 'ora.gipcd' on 'dmrs11srvcla001'
CRS-2681: Clean of 'ora.gipcd' on 'dmrs11srvcla001' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'dmrs11srvcla001'
Start action for daemon aborted
CRS-2674: Start of 'ora.gpnpd' on 'dmrs11srvcla001' failed
CRS-2679: Attempting to clean 'ora.gpnpd' on 'dmrs11srvcla001'
CRS-2681: Clean of 'ora.gpnpd' on 'dmrs11srvcla001' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'dmrs11srvcla001'
CRS-2672: Attempting to start 'ora.diskmon' on 'dmrs11srvcla001'
CRS-2676: Start of 'ora.diskmon' on 'dmrs11srvcla001' succeededalertnode001.log
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:11:40.789
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:11:41.654
[ohasd(4351)]CRS-2765:Resource 'ora.mdnsd' has failed on server 'node001'.
2012-07-02 17:11:43.404
[cssd(4997)]CRS-1713:CSSD daemon is started in clustered mode
2012-07-02 17:11:46.634
[cssd(4997)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-07-02 17:11:46.745
[ohasd(4351)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'node001'.
2012-07-02 17:12:42.384
[/opt/grid/product/11gR2/grid/bin/orarootagent.bin(4488)]CRS-5818:Aborted command 'start for resource: ora.diskmon 1 1' for resource 'ora.diskmon'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/orarootagent_root/orarootagent_root.log.
2012-07-02 17:12:46.390
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.diskmon'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:14:50.768
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:16:55.819
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:16:58.354
[cssd(5137)]CRS-1713:CSSD daemon is started in clustered mode
2012-07-02 17:16:58.425
[cssd(5137)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-07-02 17:25:23.194
[ohasd(4351)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node001'.
2012-07-02 17:25:23.200
[ohasd(4351)]CRS-2767:Target resource 'ora.diskmon' is offline, will not recover.
2012-07-02 17:26:57.384
[/opt/grid/product/11gR2/grid/bin/cssdagent(5116)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
2012-07-02 17:27:02.514
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cssd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:37:11.971
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.evmd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 02:13:57.821
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 05:14:37.915
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 05:44:44.630
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 06:14:51.303
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 06:44:57.981
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 07:15:04.655
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 07:42:45.015
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-03 07:44:50.068
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-03 07:44:52.369
[cssd(10209)]CRS-1713:CSSD daemon is started in clustered mode
2012-07-03 07:44:52.434
[cssd(10209)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-07-03 07:45:11.331
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 07:53:17.222
[ohasd(4351)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node001'.
2012-07-03 07:53:17.222
[ohasd(4351)]CRS-2767:Target resource 'ora.diskmon' is offline, will not recover.
2012-07-03 07:54:51.401
[/opt/grid/product/11gR2/grid/bin/cssdagent(10188)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
2012-07-03 07:54:56.524
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cssd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.ohasd.log
2012-07-03 07:45:11.330: [ AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_STATUS[Proxy] ID 20481:24919
2012-07-03 07:45:11.330: [ AGFW][1347250496] Received state change for ora.crsd 1 1 [old state = PARTIAL, new state = OFFLINE]
2012-07-03 07:45:11.330: [ AGFW][1347250496] Agfw Proxy Server sending message to PE, Contents = [MIDTo:2|OpID:3|FromA:{Invalid|Node:0|Process:0|Type:0}|ToA:{Invalid|Node:-1|Process:-1|Type:-1}|MIDFrom:0|Type:4|Pri2|Id:23258]
2012-07-03 07:45:11.330: [ AGFW][1347250496] Agfw Proxy Server replying to the message: RESOURCE_STATUS[Proxy] ID 20481:24919
2012-07-03 07:45:11.330: [ CRSPE][1357756736] State change received from node001 for ora.crsd 1 1
2012-07-03 07:45:11.331: [ CRSPE][1357756736] Processing PE command id=139. Description: [Resource State Change (ora.crsd 1 1) : 0x1c284d40]
2012-07-03 07:45:11.331: [ CRSPE][1357756736] RI [ora.crsd 1 1] new external state [OFFLINE] old value: [INTERMEDIATE] on node001 label = []
2012-07-03 07:45:11.331: [ CRSPE][1357756736] Resource Resource Instance ID[ora.crsd 1 1]. Values:
STATE=OFFLINE
TARGET=ONLINE
LAST_SERVER=node001
CURRENT_RCOUNT=1
LAST_RESTART=1341292505
FAILURE_COUNT=0
FAILURE_HISTORY=
STATE_DETAILS=
INCARNATION=29
STATE_CHANGE_VERS=29
LAST_FAULT=1341292504
DEGREE_ID=1
ID=ora.crsd 1 1
CARDINALITY_ID=1
Lock Info:
Write Locks:none
ReadLocks:|STATE INITED||INITIAL CHECK DONE| has failed!
2012-07-03 07:45:11.331: [ CRSPE][1357756736] Processing unplanned state change for [ora.crsd 1 1]
2012-07-03 07:45:11.331: [ CRSPE][1357756736] ora.crsd 1 1: uptime exceeds uptime threshold , resetting restart count
2012-07-03 07:45:11.331: [ CRSPE][1357756736] Local Recovery picked for [ora.crsd 1 1]
2012-07-03 07:45:11.333: [ CRSPE][1357756736] Sending message to agfw: id = 23260
2012-07-03 07:45:11.333: [ AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23260
2012-07-03 07:45:11.333: [ CRSPE][1357756736] CRS-2672: Attempting to start 'ora.crsd' on 'node001'
2012-07-03 07:45:11.333: [ AGFW][1347250496] Agfw Proxy Server forwarding the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23260 to the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
2012-07-03 07:45:12.349: [ AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23261 from the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
2012-07-03 07:45:12.350: [ AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_START[ora.crsd 1 1] ID 4098:23260
2012-07-03 07:45:12.350: [ CRSPE][1357756736] Received reply to action [Start] message ID: 23260
2012-07-03 07:45:12.350: [ AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23261 from the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
2012-07-03 07:45:12.350: [ AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_START[ora.crsd 1 1] ID 4098:23260
2012-07-03 07:45:12.350: [ CRSPE][1357756736] Received reply to action [Start] message ID: 23260
2012-07-03 07:45:12.351: [ CRSPE][1357756736] RI [ora.crsd 1 1] new external state [INTERMEDIATE] old value: [OFFLINE] on node001 label = []
2012-07-03 07:45:12.351: [ CRSPE][1357756736] CRS-2676: Start of 'ora.crsd' on 'node001' succeeded
2012-07-03 07:45:12.351: [ CRSPE][1357756736] PE Command [ Resource State Change (ora.crsd 1 1) : 0x1c284d40 ] has completed
2012-07-03 07:45:12.351: [ AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23269
2012-07-03 07:45:12.351: [ AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23269
2012-07-03 07:45:12.351: [ AGFW][1347250496] Agfw received reply from PE for resource state change for ora.crsd 1 1
2012-07-03 07:53:17.220: [ AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_STATUS[Proxy] ID 20481:25353
2012-07-03 07:53:17.221: [ AGFW][1347250496] Received state change for ora.diskmon 1 1 [old state = ONLINE, new state = PLANNED_OFFLINE]
2012-07-03 07:53:17.221: [ AGFW][1347250496] Agfw Proxy Server sending message to PE, Contents = [MIDTo:2|OpID:3|FromA:{Invalid|Node:0|Process:0|Type:0}|ToA:{Invalid|Node:-1|Process:-1|Type:-1}|MIDFrom:0|Type:4|Pri2|Id:23497]
2012-07-03 07:53:17.221: [ AGFW][1347250496] Agfw Proxy Server replying to the message: RESOURCE_STATUS[Proxy] ID 20481:25353
2012-07-03 07:53:17.221: [ CRSPE][1357756736] State change received from node001 for ora.diskmon 1 1
2012-07-03 07:53:17.221: [ CRSPE][1357756736] Processing PE command id=140. Description: [Resource State Change (ora.diskmon 1 1) : 0x2aaab00318a0]
2012-07-03 07:53:17.221: [ CRSPE][1357756736] RI [ora.diskmon 1 1] new external state [OFFLINE] old value: [ONLINE] on node001 label = []
2012-07-03 07:53:17.221: [ CRSPE][1357756736] RI [ora.diskmon 1 1] new target state: [OFFLINE] old value: [ONLINE]
2012-07-03 07:53:17.222: [ CRSOCR][1351452992] Multi Write Batch processing...
2012-07-03 07:53:17.222: [ CRSPE][1357756736] Resource Resource Instance ID[ora.diskmon 1 1]. Values:
STATE=OFFLINE
TARGET=OFFLINE
LAST_SERVER=node001
CURRENT_RCOUNT=0
LAST_RESTART=1341294297
FAILURE_COUNT=0
FAILURE_HISTORY=
STATE_DETAILS=
INCARNATION=2
STATE_CHANGE_VERS=5
LAST_FAULT=1341242723
DEGREE_ID=1
ID=ora.diskmon 1 1
CARDINALITY_ID=1
Lock Info:
Write Locks:START of [ora.cssd 1 1] on [node001] : 0x2aaab000ba10
ReadLocks:|STATE INITED| has failed!
2012-07-03 07:53:17.222: [ CRSPE][1357756736] Processing unplanned state change for [ora.diskmon 1 1]
2012-07-03 07:53:17.222: [ CRSPE][1357756736] Target is not ONLINE, not recovering [ora.diskmon 1 1]
2012-07-03 07:53:17.222: [ CRSPE][1357756736] PE Command [ Resource State Change (ora.diskmon 1 1) : 0x2aaab00318a0 ] has completed
2012-07-03 07:53:17.222: [ AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23501
2012-07-03 07:53:17.222: [ AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23501
2012-07-03 07:53:17.223: [ AGFW][1347250496] Agfw received reply from PE for resource state change for ora.diskmon 1 1
2012-07-03 07:53:17.223: [ CRSOCR][1351452992] Multi Write Batch done.
2012-07-03 07:54:56.523: [ AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.cssd 1 1] ID 4098:23242 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:54:56.523: [ AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_START[ora.cssd 1 1] ID 4098:23220
2012-07-03 07:54:56.524: [ CRSPE][1357756736] Received reply to action [Start] message ID: 23220
2012-07-03 07:54:56.524: [ AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.cssd 1 1] ID 4098:23242 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:54:56.524: [ CRSPE][1357756736]Created alert : (:CRSPE00111:) : Start action timed out!
2012-07-03 07:54:56.524: [ CRSPE][1357756736] Start action failed with error code: 3
2012-07-03 07:54:56.524: [ AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_START[ora.cssd 1 1] ID 4098:23220
2012-07-03 07:54:56.524: [ CRSPE][1357756736] Received reply to action [Start] message ID: 23220
2012-07-03 07:54:56.524: [ AGFW][1347250496] Agfw Proxy Server received the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:54:56.524: [ AGFW][1347250496] Suicide request received from /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:54:56.524: [ AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:54:56.524: [ CRSPE][1357756736] CRS-2674: Start of 'ora.cssd' on 'node001' failed
2012-07-03 07:54:56.525: [UiServer][1361959232] Container [ Name: ORDER
MESSAGE:
TextMessage[CRS-2674: Start of 'ora.cssd' on 'node001' failed]
MSGTYPE:
TextMessage[1]
OBJID:
TextMessage[ora.cssd]
WAIT:
TextMessage[0]
2012-07-03 07:54:56.525: [ CRSPE][1357756736] Sending message to agfw: id = 23555
2012-07-03 07:54:56.525: [ CRSPE][1357756736] CRS-2679: Attempting to clean 'ora.cssd' on 'node001'
2012-07-03 07:54:56.525: [ AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
2012-07-03 07:54:56.525: [ AGFW][1347250496] Agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id root is being stopped. Will be restarted when agent stops completly
2012-07-03 07:54:56.525: [ AGFW][1347250496] Could not forward message [RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555] to agent. /opt/grid/product/11gR2/grid/bin/cssdagent_root is not running
2012-07-03 07:54:56.525: [ AGFW][1347250496] Can not start Agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id root is waiting to be restarted.
2012-07-03 07:54:56.525: [UiServer][1361959232] Container [ Name: ORDER
MESSAGE:
TextMessage[CRS-2679: Attempting to clean 'ora.cssd' on 'node001']
MSGTYPE:
TextMessage[3]
OBJID:
TextMessage[ora.cssd]
WAIT:
TextMessage[0]
2012-07-03 07:55:01.627: [ CRSCOMM][1340946752][FFAIL] Couldnt clscreceive message, no message: 11
2012-07-03 07:55:01.627: [ CRSCOMM][1340946752] Client disconnected.
2012-07-03 07:55:01.627: [ CRSCOMM][1340946752][FFAIL] Listener got clsc error 11 for memNum. 14
2012-07-03 07:55:01.628: [ CRSCOMM][1340946752] IPC listener connection to member 14 has been removed
2012-07-03 07:55:01.628: [CLSFRAME][1340946752] Removing IPC Member:{Relative|Node:0|Process:14|Type:3}
2012-07-03 07:55:01.628: [CLSFRAME][1340946752] Disconnected from AGENT process: {Relative|Node:0|Process:14|Type:3}
2012-07-03 07:55:01.628: [ CRSPE][1357756736] Disconnected from server:
2012-07-03 07:55:01.628: [ AGFW][1347250496] Agfw Proxy Server received process disconnected notification, count=1
2012-07-03 07:55:01.628: [ AGFW][1347250496] /opt/grid/product/11gR2/grid/bin/cssdagent_root disconnected.
2012-07-03 07:55:01.628: [ AGFW][1347250496] Restarting the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.628: [ AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root[10188] stopped!
2012-07-03 07:55:01.628: [ CRSCOMM][1347250496] removeConnection: Member 14 does not exist.
2012-07-03 07:55:01.628: [ AGFW][1347250496] Starting the agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id: root and incarnation:7
2012-07-03 07:55:01.632: [ AGFW][1347250496] Starting the HB [Interval = 30000, misscount = 10kill allowed=0] for agent: /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.819: [CLSFRAME][1340946752] New IPC Member:{Relative|Node:0|Process:15|Type:3}:AGENT
2012-07-03 07:55:01.819: [CLSFRAME][1340946752] New process connected to us ID:{Relative|Node:0|Process:15|Type:3} Info:AGENT
2012-07-03 07:55:01.837: [ AGFW][1347250496] Agfw Proxy Server received the message: AGENT_HANDSHAKE[Proxy] ID 20484:14
2012-07-03 07:55:01.837: [ AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root with pid:10530 connected to server.
2012-07-03 07:55:01.837: [ AGFW][1347250496] Agfw Proxy Server sending message: RESTYPE_ADD[ora.cssd.type] ID 8196:23591 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.838: [ AGFW][1347250496] Agfw Proxy Server sending message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:23593 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.838: [ AGFW][1347250496] Agfw Proxy Server forwarding the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.839: [ AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_HANDSHAKE[Proxy] ID 20484:14
2012-07-03 07:55:01.851: [ AGFW][1347250496] Received the reply to the message: RESTYPE_ADD[ora.cssd.type] ID 8196:23591 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.854: [ AGFW][1347250496] Received the reply to the message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:23593 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.861: [ AGFW][1347250496] Received the reply to the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23594 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.862: [ AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
2012-07-03 07:55:01.862: [ AGFW][1347250496] Received the reply to the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23594 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.862: [ CRSPE][1357756736] Received reply to action [Clean] message ID: 23555
2012-07-03 07:55:01.862: [ AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
2012-07-03 07:55:01.863: [ AGFW][1347250496] Agfw Proxy Server received the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:55:01.863: [ CRSPE][1357756736] Received reply to action [Clean] message ID: 23555
2012-07-03 07:55:01.863: [ AGFW][1347250496] Suicide request received from /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.863: [ AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:55:01.863: [ CRSPE][1357756736] CRS-2681: Clean of 'ora.cssd' on 'node001' succeeded
2012-07-03 07:55:01.863: [ CRSPE][1357756736] Sequencer for [ora.cssd 1 1] has completed with error: CRS-0215: Could not start resource 'ora.cssd'.
2012-07-03 07:55:01.863: [UiServer][1361959232] Container [ Name: ORDER
MESSAGE:
TextMessage[CRS-2681: Clean of 'ora.cssd' on 'node001' succeeded]
MSGTYPE:
TextMessage[3]
OBJID:
TextMessage[ora.cssd]
WAIT:
TextMessage[0]
2012-07-03 07:55:01.864: [ CRSPE][1357756736] PE Command [ Start Resource : 0x2aaab0009d00 ] has completed
2012-07-03 07:55:01.864: [ AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23606
2012-07-03 07:55:01.864: [ CRSPE][1357756736] UI Command [Start Resource : 0x2aaab0009d00] is replying to sender.
2012-07-03 07:55:01.864: [ AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23606
2012-07-03 07:55:01.864: [UiServer][1361959232] Container [ Name: UI_DATA
ora.cssd:
TextMessage[215]
2012-07-03 07:55:01.864: [UiServer][1361959232] Done for ctx=0x2aaab004ece0
2012-07-03 07:55:01.869: [UiServer][1364060480] Closed: remote end failed/disc.
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752][FFAIL] Couldnt clscreceive message, no message: 11
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752] Client disconnected.
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752][FFAIL] Listener got clsc error 11 for memNum. 15
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752] IPC listener connection to member 15 has been removed
2012-07-03 07:55:03.791: [CLSFRAME][1340946752] Removing IPC Member:{Relative|Node:0|Process:15|Type:3}
2012-07-03 07:55:03.791: [CLSFRAME][1340946752] Disconnected from AGENT process: {Relative|Node:0|Process:15|Type:3}
2012-07-03 07:55:03.792: [ CRSPE][1357756736] Disconnected from server:
2012-07-03 07:55:03.792: [ AGFW][1347250496] Agfw Proxy Server received process disconnected notification, count=1
2012-07-03 07:55:03.792: [ AGFW][1347250496] /opt/grid/product/11gR2/grid/bin/cssdagent_root disconnected.
2012-07-03 07:55:03.792: [ AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root[10530] stopped!
2012-07-03 07:55:03.792: [ CRSCOMM][1347250496] removeConnection: Member 15 does not exist. -
Upgraded to Mavericks and time machine backups keep failing.
I upgraded to Mavericks a few days ago and now I find my time machine backups keep failing. I first tried turning off the power to the time machine then turning it on again and I managed to get one complete backup but that took over 20 hours to complete.
The time machine backup mode never seems to get beyond " preparing backup" then showing the message "backing up failed, disc already in use"
The time machine backup worked fine before I upgraded, is there a way round this problem or will I have to go through reloading the time machine as if it were a new piece of equipment?
My wife's iMac is still on mountain lion 10.8.5 and the backups on the same Time Machine work fine.
Any help would be gratefully received
GregHi,
I have exactly the same problem.
MBP 2011 running 10.9 named "ebook"
MacMini running 10.8.5 server with TM share
everything works fine UNTIL for some reason the MBP is interrupted during a TM backup ...
After that I get the disk already in use error !
Rebooting the MBP wont help, but I narrowed the problem down ...
Looking on the Mini server I noticed :
- the TM backup user stays connected over AFP, even after several hours of inactivity and a couple of reboots of the MBP. Killing the AFP connection works, But problem stil continues !
- looking on the MBP with "lsof | grep ebook" showed me that the SparseBundles were still in use by the AFP process ... Using the Server control panel and restarting AFP solved that ...
After restarting the AFP process the remote TM Backup started to work again !
A couple of days later, the same problem occurred again, fixed it by this work around ...
I hope there will be a more permanent solotiun for this ! -
I have had a Macbook Pro for the last few months and been successfully burning to DVD-R (HP brand), but finished the stack and bought some Tesco DVD-R discs: NONE of these will burn in the same drive: they just go in, shuffle around a bit and then get ejected: they are not even recognised as being there: however they work fine in my PC's DVD drive and in our DVD recorder.
So I go to another store and ask for DVDs that WILL work with Apple - "can't tell you if they will" so I bought some TDKs: haven't tried them yet.
Which discs do others find work best?
The drive is supposed to be compatible with a lot of different DVD formats.I have been burning CDs for 8 years and DVDs for 6 years.
I have invariably bought the cheapest discs available, often supermarket or photo store "own" brands and have rarely had a problem.
On the very few occasions I have suffered a failed disc I could never be sure whether it was the disc's fault or my burner's.
From what information I can glean it appears that my (almost non-existent) failure rate is much lower than that of people using premium brands.
P.S. I hope David's findings don't apply to me as I have an unopened pack of 100 Memorex DVDs which I will be using in the near future when my stock of Kodak discs (bought from Tesco for less than 15 pence each) runs out.
I will keep you posted as I am now viewing the prospect with a little trepidation!
Message was edited by: Ian R. Brown -
Folder with exclamation still exists
hi!
my ipod is a 60gb photo.after i downloaded the 2005-09-23 updater and clicked on the icon to update the message'firmware failed. disc write error' appeared. since this option didn't work I tried the restore option that also didn't work and the same message appeared.now my screen has this folder with a exclamation which won't go away and the ipod dosen't budge.i've tried everything including toggling with the hold switch everything the manual says and the online support says but still nothing works.i even downloaded the updater twice but the same message appears.please help someone. the battery is also charged .the ipod's backlight also dosen't light up. the display also has changed.and at the time of music or photo transfer it displays a -36 and -5 error respectivelyCall Apple or, even better, go to an Apple store.
Maybe you are looking for
-
i forgot the administrator password for my mac and cant set a new one without it how can i set a new one
-
Mac Pro trapcode particular with Cs4 install problems
hi im on mac with leo installed.I'm trying to install particular 1.5 with cs4 but no luck so far. it just doesnt show up in AE effects panel any ideas? thx
-
I just got the Miglia TVMini, and following the setup assistant, I can't get past 'now please connect the unit to your mac via the usb cable supplied' and then nothing happens. The 'next' button never lights up. I have installed the EyeTv 2.1 update.
-
Has/can anyone swap black for white in store?
Has anyone swapped their iPhone 5 for a different colour in store? The reason I ask is that with only moderate use the black is showing signs of wear around the bezel, something that should not be happening to such a new and expensive device. What is
-
Garage band as final audio polish
I've been recording voice over in imovie, rather than garage band, because I edit both picture and audio at the same time, which is impossible in garage band. I've noticed that the master volume/track volume settings in GB allows for far greater volu