Failed downloads eating up storage space?
Hoping somebody can help me here, recently purchased a couple of TV series via iTunes and have been downloading and watching on both my iPad and iPhone. The problem is, they seem to get almost fully downloaded and then a message pops us saying unable to download. This keeps happening with various wifi networks on both devices, and I've noticed that the available space on both devices has reduced drastically. My iPad no longer has enough space for an HD episode, and my iPhone is reduced to being able to hold about 2 episodes. I go to settings>usage to see what the apps are using and they total very little in comparison to what the devices can hold. It's not even due to the number of photos/other documents in the devices as there aren't really any, or at least no way near enough to create the storage issues I'm experiencing. Starting to get really annoyed now as every time I try to download an episode I'm loosing storage space. The downloads do eventually work, but only after numerous attempts. It's not even like it's a dodgy download, or at least I hope not I paid good money via iTunes for the series!
In case anyone else finds this post with a similar problem.. I found a solution. (posted by a user named txforever)
Manually change the date back several months (or years if need be) and then go in to your Recently Deleted Photos folder. Don't be fooled by it telling you there are 0 photos. If you actually open it up, suddenly you will find all the old photos that should've been deleted but never were.
I emptied it and my problem is solved.
Hooray!
I feel like Apple should issue this as a known solution to this bug that a lot of people seem to be having. And also, they should fix the bug of course.
Similar Messages
-
Security copy eats my storage space on my MBP
security copy eats my storage space on my MBP pleas help
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
http://pondini.org/TM/30.html -
Under 8.0 I had three 4-terabyte drives set up as a Storage Pool in Storage Spaces. I had five storage-space drives using this pool I had
been using them for months with no problems. After upgrading to 8.1 ( which gave no errors ) the drives no longer exist. Going into "Storage Spaces" in the control panel, I do not see my existing storage pool or storage drives. I'm prompted
to create a new Pool and Storage Spaces. If I click the "Create Pool" it does not list the three drives I used previously as available to add.
Device Manager shows all three drives as present and OK.
Disk Management shows Disks 0,1,2,6. The gap in between 2 and 6 is where the 3,4,5 storage spaces drives were.
Nothing helpful in the event log or the services.
I've downloaded the ReclaiMe Storage Spaces recovery tool and it sees all of my logical drives with a "good" prognosis for recovery. I've not gone down that road yet though because it requires separate physical drives to copy everything to
and they want $299 for the privilege.
Does anyone have any ideas? I'm thinking of doing a fresh 8.1 install to another drive to see if it can see it or reinstalling 8.1 to the existing drive in the hope that it will just suddenly work. Or possibly going back to 8.0.
Thanks for your help!
SteveHi,
“For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
restore your data.”
I’d like to share the following article with you for reference:
Storage Spaces Frequently Asked Questions
(Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Storage Spaces Slab Enumeration Fails
I'm trying to optimize my volumes, and slab enumeration fails consistently at 72%. The space is healthy, and I've tried everything I can think of. If I just ReTrim, no error comes up. I should mention that I'm on Windows 8.1, not Server 2012, but I understand
that the Storage Space part is basically the same, and I thought I'd find more help with that on this forum. If I erred, please let me know.
Thanks!
PS C:\Windows\system32> Optimize-Volume -DriveLetter P -SlabConsolidate -ReTrim -Verbose
VERBOSE: Invoking slab consolidation on Main (P:)...
VERBOSE: Slab Analysis: 0% complete...
VERBOSE: Slab Analysis: 100% complete.
VERBOSE: Slab Enumeration: 0% complete...
VERBOSE: Slab Enumeration: 1% complete...
VERBOSE: Slab Enumeration: 2% complete...
VERBOSE: Slab Enumeration: 3% complete...
VERBOSE: Slab Enumeration: 4% complete...
VERBOSE: Slab Enumeration: 5% complete...
VERBOSE: Slab Enumeration: 6% complete...
VERBOSE: Slab Enumeration: 7% complete...
VERBOSE: Slab Enumeration: 8% complete...
VERBOSE: Slab Enumeration: 9% complete...
VERBOSE: Slab Enumeration: 10% complete...
VERBOSE: Slab Enumeration: 11% complete...
VERBOSE: Slab Enumeration: 12% complete...
VERBOSE: Slab Enumeration: 13% complete...
VERBOSE: Slab Enumeration: 14% complete...
VERBOSE: Slab Enumeration: 15% complete...
VERBOSE: Slab Enumeration: 16% complete...
VERBOSE: Slab Enumeration: 17% complete...
VERBOSE: Slab Enumeration: 18% complete...
VERBOSE: Slab Enumeration: 19% complete...
VERBOSE: Slab Enumeration: 20% complete...
VERBOSE: Slab Enumeration: 21% complete...
VERBOSE: Slab Enumeration: 22% complete...
VERBOSE: Slab Enumeration: 23% complete...
VERBOSE: Slab Enumeration: 24% complete...
VERBOSE: Slab Enumeration: 25% complete...
VERBOSE: Slab Enumeration: 26% complete...
VERBOSE: Slab Enumeration: 27% complete...
VERBOSE: Slab Enumeration: 28% complete...
VERBOSE: Slab Enumeration: 29% complete...
VERBOSE: Slab Enumeration: 30% complete...
VERBOSE: Slab Enumeration: 31% complete...
VERBOSE: Slab Enumeration: 32% complete...
VERBOSE: Slab Enumeration: 33% complete...
VERBOSE: Slab Enumeration: 34% complete...
VERBOSE: Slab Enumeration: 35% complete...
VERBOSE: Slab Enumeration: 36% complete...
VERBOSE: Slab Enumeration: 37% complete...
VERBOSE: Slab Enumeration: 38% complete...
VERBOSE: Slab Enumeration: 39% complete...
VERBOSE: Slab Enumeration: 40% complete...
VERBOSE: Slab Enumeration: 41% complete...
VERBOSE: Slab Enumeration: 42% complete...
VERBOSE: Slab Enumeration: 43% complete...
VERBOSE: Slab Enumeration: 44% complete...
VERBOSE: Slab Enumeration: 45% complete...
VERBOSE: Slab Enumeration: 46% complete...
VERBOSE: Slab Enumeration: 47% complete...
VERBOSE: Slab Enumeration: 48% complete...
VERBOSE: Slab Enumeration: 49% complete...
VERBOSE: Slab Enumeration: 50% complete...
VERBOSE: Slab Enumeration: 51% complete...
VERBOSE: Slab Enumeration: 52% complete...
VERBOSE: Slab Enumeration: 53% complete...
VERBOSE: Slab Enumeration: 56% complete...
VERBOSE: Slab Enumeration: 57% complete...
VERBOSE: Slab Enumeration: 58% complete...
VERBOSE: Slab Enumeration: 59% complete...
VERBOSE: Slab Enumeration: 60% complete...
VERBOSE: Slab Enumeration: 61% complete...
VERBOSE: Slab Enumeration: 62% complete...
VERBOSE: Slab Enumeration: 63% complete...
VERBOSE: Slab Enumeration: 64% complete...
VERBOSE: Slab Enumeration: 65% complete...
VERBOSE: Slab Enumeration: 66% complete...
VERBOSE: Slab Enumeration: 67% complete...
VERBOSE: Slab Enumeration: 68% complete...
VERBOSE: Slab Enumeration: 69% complete...
VERBOSE: Slab Enumeration: 70% complete...
VERBOSE: Slab Enumeration: 71% complete...
VERBOSE: Slab Enumeration: 72% complete...
Optimize-Volume : One or more parameter values passed to the method were invalid.
At line:1 char:1
+ Optimize-Volume -DriveLetter P -SlabConsolidate -ReTrim -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_Volume (Ob...4-8258-902b...):ROOT/Microsoft/...age/MSFT_Volume) [
Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 4,Optimize-VolumeHi,
Mark sure you select the correct version as for Windows 8.1 there is x64 and x86 versions:
The hot fix for your issue has been packaged and placed on an HTTP site for you to download.
WARNING: This fix is not publicly available through the Microsoft website as it has not gone through full Microsoft regression testing. If you would like confirmation that this fix is designed to address your specific problem, or if you would like to
confirm whether there are any special compatibility or installation issues associated with this fix, you are encouraged to speak to a Support Professional in Product Support Services.
Package:
KB Article Number (s) : 2929874
Language: All (Global)
Platform: x64
Location: ( http://hotfixv4.microsoft.com/Windows%208.1/Windows%20Server%202012%20R2/sp1/Fix492345/9600/free/472980_intl_x64_zip.exe )-----------------------------------------------------------
KB Article Number (s) : 2929874
Language: All (Global)
Platform: i386
Location: ( http://hotfixv4.microsoft.com/Windows%208.1/Windows%20Server%202012%20R2/sp1/Fix492345/9600/free/472979_intl_i386_zip.exe )
NOTE: Be sure to include all text between '(' and ')' when navigating to this hot fix location!
If you have any feedback on our support, please send to [email protected] -
MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?
Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email. -
I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?
The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.
-
can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead
The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi,
I am facing the following difficulty with my iPad (model MD369NF/A) under iOs 6.1.3.
I have bought 2 videos on iTunes Store, but I do not succeed in downloading them: an error message mentions that iPas does not have enough storage capacity.
As a matter of face, when I look at the way the storage is used, I find “Others” for around 10 Go (is there some king of reserved space for the downloading of videos from iTunes Store?), and only a very small number of Mo available.
I would simply like to cancel the downloading of the 2 videos, and hope that it would free the "Others" storage space (in the hypothesis that "Others" is space reserved for videos once downloaded), but I do not manage to do it. I can suspend the downloading, but I do not see how to cancel it.
Would you have a solution to propose ?
Thanks in advance for your help,
NicolasHey Nicolas36,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines issues with free space, capacity, and a large amount of "other" space. You'll want to connect your iPad to your computer with iTunes to follow the steps:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
- Turn off the music or photo sync option in iTunes for the device.
- Click Apply to sync the changes to the device.
- Turn the music and photo sync options for the device on again.
- Click Apply again to try to sync the device to iTunes.
Thanks,
Matt M. -
I was trying to download the new Black Ops (Strike Team) app and when I try to download it, it says I don't have enough storage space. I made sure I had 1.31 GB of space (like it requires) but it still says I don't have enough space. I even tried to delete more 2.5 GB (I have the iPhone 4S) and the app specifically says that is is compatable with iPhone 4S. I even tried rebooting the phone a couple times before downloading, but it still says the same thing.
The app you are trying to download my be a zipped file and more space than 1.3GB. go to settings/general/usage and delete what you no longer want to make more space
-
How do I cancel a download for a rented iTunes movie because there isn't enough storage space
How do I cancel a download for a rented iTunes movie because there isn't enough storage space?
Purchases cannot be cancelled, but if you cannot clear enough space to allow the download, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Perhaps there will be something they can do for you.
Regards. -
I cleared a playlist on my iPhone 4 because I wanted to remove the songs from my phone's storage (I had previously downloaded them) because I wanted to clear storage space. I now want to access the playlist via iCloud and can't. In other words, I want it to sync with the playlist as it exists in iTunes Match. Thoughts?
Export Photos and Videos from Camera Roll to your computer.
Empty Camera Roll.
Make a Folder/Album with all photos and videos you want to have in your iPhone and sync them through iTunes.
This will free up space in your iPhone and your iCloud.
The backup of Camera Roll in iCloud is only to restore your iPhone. You can't access them directly. -
The failed download of Yosemite used up disk space and I can't find away to delete that because it is taking up 4 GB of space that I need to download Yosemite.
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X -
I am trying to download photos off my IPhone as the "Cloud" tells me I have run out of storage space. I have connected my phone to IPhoto on my Mac but when I clik on Import nothing happens. What am I doing wrong?
Help for iCloud storage space >> Managing your iCloud storage
Maybe you are looking for
-
Does JMS support reliable messaging (store-and-forward) for app clients?
I need to write an enterprise application client (launched with Java web start or packaged with a tool like Sun's package-appclient) that can send messages reliably from Linux to Windows. JMS seems like the obvious solution, so I deployed an EAR file
-
Date in iCal icon not in right place
Does anyone know why the date in my iCal icon shows like this: !http://www.feisar.plus.com/ical.jpg! In all the screenshots I've seen of Leopard, the date is shown in the white part of the icon. The numbers in mine are shifted up a few pixels.
-
IPad - with movie clips - how can I play more than one at a time?
iPad2. I post short movie clips via iTunes to the Photo catagory. I can play each of these clips by selecting the clip and pressing the start arrow, only the selected clip will play. How can I select a group of movie clips and have them play with
-
Macros not working in adobe reader touch???
Is it possible to have a document with working macros which update figures in a .pdf file in adobe reader touch on windows 8 rt???
-
i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!