Failed firmware upgrade on PX6-300D

Upgraded my PX6-300D to 4.1.102.29716 and on reboot the LED status bar stops at 95% and the System Status Indicator is solid red and the Drive Activity Indicator is solid red. What is the next step in troubleshooting this problem?

Hello gnomikk,
For a px6 that is getting hung in the boot sequence, I would try booting the NAS with no drives installed.
If it boots, try adding the drives, one-by-one, giving about a miniute between each one, while the NAS is still powered up.
If the NAS will not boot with the drives removed, you will need to contact your local support here:
https://lenovo-eu-en.custhelp.com/app/answers/detail/a_id/14722

Similar Messages

Had a failed Firmware Upgrade on a Zen??? LOOK INSIDE FOR POSSIBLE

From the Nomadness.net forums: (I had the same problem and user inferno9 at those forums posted this which fixed my issues - hope it helps!)
The problem was that I had formatted the dri've and attempted to reload the firmware, when, BOOM, the firmware updates would not detect the player. I tried all kinds of different strategies, different drivers, different applications, safe mode, etc...until I FINALLY figured it out.
Buried deep within Microsoft's website, I found this link...
http://www.microsoft.com/windows/windowsmedia/player//readme.aspx#RollingbacktoapreviousversionofthePlay er
Quote:
Issues updating firmware on Creative ZEN portable devices after installing Windows Media Player
If you have a Creative ZEN device, make sure the device has the latest firmware before you install the beta release of Windows Media Player . To download the latest firmware, go to Creative Worldwide.
If you try to upgrade the firmware on your Creative ZEN after you install the beta release of Windows Media Player , the Creative firmware upgrade software might not recognize your device.
In this case, remove Windows Media Player , update the Creative firmware, and then reinstall Windows Media Player . Creative plans to address this issue in future firmware updates.
For information about removing the beta release of Windows Media Player , see Rolling back to a previous version of the Player.
Endquote:
Good luck all.

EnsRegis wrote:I'd really love to see a firmware upgrade that gives the Zen Touch a color screen instead of a black-and-white screen. It can't be that hard to program, can it's If you made this, the Touch would be better than any other player on the market! It'd beat the iPod! <EM>Just kidding.</EM>
I think so

WRT54G v8.2 failed firmware upgrade problem

Today I tried to upgrade my WRT54G v8.2 router to the latest firmware from Linksys. But the upgrade kept repeating itself every time when the progress bar reached about 75%. This lasted more than 30 minutes and I had to stopped the upgrade. Then the router stopped working. I've reset and hard reset the router. I also tried the tftp method to upgrade the firmware again. But the problem is still there. When I ping 192.168.1.1, I constantly get the "Destination host unreachable" message. Anyone could help me fix this problem? The power light and the ethernet port light are always on. Is there any way to fix the problem? Any information is appreciated. Thanks a lot.
Solved!
Go to Solution.

Do not use the wireless computer to upgrade the firmware.Hard-reset the router for 1 minute and try this link and check if that works...

PX6 300d firmware upgrade problem

Hello all. We are trying to upgrade the firmware of our Storcenter, but the problem is that when we attempt to upload the ".tgz" file, the browser shows a message that said: "The software could not be updated", we tried with IE8, IE11, Chrome, Firefox and different O.S. like MacOS and Windows 7, 8 or 2008. We follow the steps detailed on this link https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27366. Firmware of our Storcenter: 3.2.3.14250 Any idea?Thanks in advance.

Hello PabloRusso
Please be sure that your are trying to use the correct update files in order.
px4px6-NOBRAND-3.2.3.15290.tgz would be first
px4px6-4.0.2.9960.tgz would be second
and then you can go to px4px6-4.1.106.31982.tgz
Your px6-300d should be running version 4.0.2.9960 or above before updating to version 4.1.106.31982. If your px6-300d is running version 3.2.3.9273 through 3.2.3.15290, you can update using px4px6-4.0.2.9960.tgz and then update to 4.1.106.31982. If your px6-300d is running a version lower than 3.2.3.9273, you need to upgrade using px4px6-NOBRAND-3.2.3.15290.tgz, and then update to 4.0.2.9960 before updating to 4.1.106.31982.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Creative Zen Microphoto - "Firmware upgrade failed&qu

Hi,
two days ago my Zen Microphoto started in "Recovery Mode".
I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
Then I downloaded the latest firmware version for it:
ZENMicroPhoto_PCFW_L6__3_0.exe
Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
ZENMicroPhoto_PCFW_L6__3_0.exe
detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
I also tried the same procedure with
ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
Any ideas how to "repair" the player
Toddl
Message Edited by Toddl on 04-2-2008 09:40 AM

I have this same problem except with the Zen Vision: M. Any help would be appreciated.

E75 fails to upgrade firmware via USB

Hi,
My Ovi suit tells me that there is a firmware upgrade to my E75. From 202.12.01 to
211.12.01.
I have now tried at least 10 times to upgrade via USB cable but all of them fails before they even start to copy the firmware to the Phone.
I have tried through OVSuite, PCSuit and also with Nokia SW updatear stand alone but all fails with slightly different error messages.
Ovi suite 2.5.8se only tells me it fail because of a disconection withthe phone
PC Suit tells me that I can't connect the phone through an USB hub (which I haven't ).
The strange thing is that I can see that they are comminucation becasue both sw are able to identify my phone and also what FW I am using.
What could be wong.
All the SW is that latest versions and I have disabled firewals + antivirus.
Also both my laptop and phone have fully charged batteries
/MrG
Solved!
Go to Solution.

What exact version do you have *now* installed on your E75?
Do you know which product code you have?
Have a look here:
http://www.nokia.co.uk/support/product-support/device-software-update/can-i-update
Please note that the product code written on the paper label may not necessarily be the product code of your telephone. If you bought it from Nokia it probably is the same. In my case, I bought it from an online store in Germany and the internal product code was not the same as the one on the label.. which is suspicious, but anyway.

Lenovo Iomega ix4-300d Disk Firmware Upgrade

Hi guys,
Is there a any way to upgrade my Seagate ST2000DM001-9YN164 Firmware from the IX4-300D device?
The Seagate have a firmware upgrade utility, but is a livecd and it is for i686 hardware.
Solved!
Go to Solution.

We do not recommend or see it necessary to update the firmware unless you have firmware CC37 or lower. Is there a particular reason you wanted to upgrade the firmware? These drives should work with our device without needing to update the firmware.
If you want to upgrade the firmware, then you will have to do so manually by taking the hard drives out individually and connecting them to your computer. Seagate has a program called SeaTools (http://www.seagate.com/support/downloads/seatools/) that you should be able to update the firmware with. However, be advised that if you are in warranty and perform the update and the device is damaged, it will void your warranty.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

WRT350N- Firmware Upgrade Failed

when upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
Please help what i need to do?
I already tried to boot in safe-mode to minimize programs running (firewall, etc), still showing Upgrade failed.
/v
Message Edited by viva on 10-20-2007 06:56 AM
(Edited subject to keep threads from stretching.
Thanks!)
Message Edited by JOHNDOE_06 on 10-20-2007 06:59 AM

Go to the control panel/network connections and right click on the local area connection. Click properties and roll down to highlight Internet protocol TCP/IP. Click the properties button and check "use the following IP address". Fill in 192.168.1.5 and tab through. The subnet mask will fill itself out to 255.255.255.0
make the preferred DNS server 192.168.1.1 (the router) and click okay.
If the computer succeeds in getting an IP address (verify this by opening a command window and typing "ipconfig" and seeing what it say under the local area connection), type ping 192.168.1.1 in the same command window and see if the router responds.
If so, you can use the TFTP.exe utility from linksys, available from linksysinfo.org at
http://www.linksysinfo.org/forums/downloads.php?do=file&id=4
Run this program, point it at the router IP 192.168.1.1 and show it the bin file you want to use. Might be a good time to use the released firmware rather than a beta. But that is your call. You can get the latest firmware from the linksys page.
If you are unable to ping the router, try putting the ethernet cable in a different port. Don't ask me why, but when my router bricked, it would only work on slot 4. Found this out by accident, but I was able to fix the router when I did this. If it does not work on any slot, you may be screwed. Call linksys and ask for a RMA to get a replacement. I would not tell them you bricked it with a beta firmware!

Firmware upgrade fails

I am having trouble upgrading the firmware on my WRE54G. My hardware is v.3 and the existing firmware is 3.01.01.
I downloaded the latest firmware and extracted the .img file. I went to the admin page of the expander, pointed it towards the new firmware, and hit "go." After a minute or so it said something like:
Firmware upgrade fail.
Fail!
No reasons are given.
Anybody have any idea what is going on?
Thanks,
Garth

I had a similar problem upgrading firmware with my WRT300N. What i did to solve the problem was first i downloaded and went through the winzip program given for the router, then i went back to the webpage of the router and retried the upgrade and it worked. I actually ignored by routers version, and downloaded and went through each winzip program and each firmware upgrade for every different version . **i only downloaded the firmware up to my version and my version**.
Message Edited by DaveY on 11-15-2007 07:01 PM

WAP121 - Firmware upgrade has failed

Hi,
I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware
rootfs.bin over http/https. Someone an idea?
I have downloaded the release 1.0.2.3 and 1.0.1.10 from
http://software.cisco.com/download/release.html?mdfid=284152657&flowid=32562&softwareid=282463166&release=1.0.2.3&relind=AVAILABLE&rellifecycle=&reltype=latest
My hardware:
WAP121-E-K9 V01
Firmware Version: 1.0.0.3
Regards
Jack

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
It looks like you pulled the bin file out of the tar file you downloaded. Please try to do the upgrade with the tar file. I believe that is what the WAP is looking for.
Let me know how that goes.
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
CCNA, CCNA-Wireless
866-606-1866 ext 601027
Mon - Fri 09:00 - 18:00 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found.

WRT54GS V.4 Firmware upgrade failed.

Hi,
I need help on the unit on the firmware upgrade.
Info:
Device Model No.: WRT54GS v.4
Webpage firmware Version: v1.06.3
I had download the Version 4 firmware and upgrade fail.
Please help!!!!
Thanks

Are you getting any specific error..?
Which browser you are using...?
Are you upgrading the router's firmware from wireless computer...?
Use the hard-wired computer (connected to the router) and try to use Internet Explorer to upgrade the router's firmware and check.

Firmware upgrade for keyboard failed now keys won't work

Hi
Hope someone can help, I recently upgraded my sisters intel imac and during the aluminium (USB) keyboard firmware upgrade it failed and now computer doesn't recognise keyboard keys but usb hub on keyboard that mouse is plugged into works fine. Another keyboard works fine which was handy when trying to type in the passwords to try to re update.
I have tried the following
1) searched discussions found advice on resetting nvram, and in open firmware (which on further research doesn't seem possible on this imac?) did control, option P R on start up.
3) EFI firmware upgrade was successful
4) have used disk utility to repair permissions
5) Looked in system profiler and keyboard usb hub is recognised but no keyboard. When another keyboard attached it recognises this fine and is in the system profiler
6) checked all usb ports
Main question - can I fix or do I have to get a new keyboard or perhaps it would be less stress, time wasted etc to just buy a new keyboard???
thanks
G

Hi, if the K/B is under warranty Apple will replace it FOC..Call Apple Help or ->
call in at the local Apple Store or Apple Approved Service Agent.

Vision:M - "Firmware upgrade failed!&qu

After spending several long, long hours rolling back WMP, trying different USB ports, installing and uninstalling various software, and borrowing friends' computers, I FINALLY got the firmware upgrade software to recognize my mp3 player. With great delight and an intense feeling of satisfaction, I clicked the "Upgrade" button and waited for several minutes, only to get a "Firmware upgrade failed!" message. I've tried the "Reload Firmware" option more than once, only to receive the very discouraging "Harddisk Problem". I've tried everything I can think of, from formatting to rebooting to resetting to reloading, but to no avail. I'm now left, like so many others, with a $300 bookend. Now what? I'm completely demoralized.

Well, being the stubborn person that I am,?I didn't listen to your advice andYesterday, against all odds from what I read on this forum, and being told that I would end up with an expensi've paperweight,? I decided to take the plunge and upgrade my Zen Vision M 30MB. ?I downloaded the newest firmware .6, saved it on my laptop which runs WMP 0, disabled all applications, including Norton and virus and spyware programs, as well as Creative's detector, connected my Zen Vision M to the USB dri've, double clicked the new firmware file, and followed the instructions. The new firmware started installing, within 3 minutes my player rebooted and then the library started rebuilding and within 5 minutes the process was SUCCESSFULLY COMPLETED!!!!!My player is working better than ever, it has all the new upgrades, album art, never went into Recovery Mode, and most important of all, I didn't lose any of my 2500 songs, hundreds of photos, slideshows and numerous videos, even my personal wallpaper and themes remained the same. I subsequently took the player to my desktop which runs WMP to test it'sand lo and behold, my player was immediately recognized, i transferred music and pictures without any problem and my player is now drag and drop compliant ?through Windows Explorer. My faith in Creative is unfaltering, I also own a MUVO TX FM, a Zen Micro and a Zen Sleek Photo and never had any problem with any of them.

SGE2010P 48port Gigabit POE Firmware Upgrade fails

I have a Linksys SGE2010P 48 Port switch with POE and I cannot get the firmware to upgrade.
I have downloaded the firmware software from the site: http://www.cisco.com/en/US/products/ps9985/index.html
Everytime I run the EasyUpgrade application I get the error after it starts the Telnet session:
"Did not find device information. Application will terminate"
I cannot find any reason why this is happening. I know that I have a SGE2010P and I know that I am downloading the correct firmware.
Am I missing something?

I am having the same issue where the "Easy upgrade" utility fails. When I try to upgrade firmware via the Web GUI, I am able to upload the "Software Image" & when I click "Done" the Firmware Upgrade screen displays again without any status and/or notifications relating to the firmware that was just "successfully" uploaded (according to the screen at least).
I was able to successfully upgrade the Boot Version from : 2.0.0.00 to 2.0.0.03 with this same process so what is going on with the Firmware update?
It is as if the Firmware is uploading to the switch but the update is not running.
Help!

Failed firmware upgrade on PX6-300D

Similar Messages

Maybe you are looking for