Failed health state

Does anybody know how to transfer weblogic managed server into failed state?
I need to check how node manager will restart failed server.

learning_the_new_things wrote:
hi,
generally a managed server will come to FAILED state only when it fails to start..
try this
1.u configure a managed server
2.assign a this to a machine
3. dont start the nodemanager
4. then start the server, the managed server state is changed to "failed" state.
then check ur implementationThank you. But I wanted to test node manager actions when my managed server runs normally and due to some problems it's state became FAILED.

Similar Messages

WLS 9.2: State FAILED Health OK!

Hi,
I have seen instances where the Weblogic Server 9.2 Admin console shows the state of managed server as FAILED, but the health is OK. I wanted to know if this is how the console behaves (normally), as according to me the server health cannot be OK when it has failed.
I can only think of one thing, the server not responding to any health checks from the Admin Server and so the health showing the last available state (which is OK before server failed). But, I have seen this happen (ie Admin console showing state FAILED health OK) even an hour after the managed server failed (probably due to deadlocks).
Please help me comprehend this state better.
Thanks in advance
Vikas

hi,
once u refresh the page, that will automatically changes health status...

Unable to retrieve topology component health states

Hi,
SharePoint 2013 SP1 + Sep 2014 CU and SQL Server 2012 SP1
i have created search service application using power shell and also using central administration but both times i am getting following error message when access search service application.
Unable to retrieve topology component health states. This may be because the admin component is not up and running
Pls guide how to fix it
thx
iffi

Hi Imughal,
This issue can be caused by many reasons, please check ULS log for detailed error message.
If the issue is caused by Event ID: 6482 error “A call to SSPI failed, see inner exception”, then
it can be caused by the following reasons:
The timer service account is trying to communicate with HostController service and generates 'SSPI Connect' call demanding SPN to be created for target services Identity, if no SPN is found.
The Hostcontroller service's NodeRunner process is limited to use restricted amount of RAM.
Then please follow the steps in the link below for solving this issue:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Group Member showing incorrect Health State

Hi Everybody,
Just looking for a few thoughts on an issue I've had today and a couple of times in the past.
We are running SCOM 2012 and use dynamic groups based on name to send notifications to the right people. Today we had a critical alert however when looking at the group members the health state for the server was only at warning level and a notification
was not sent.
The critical alert was that the server was not contactable, other notifications do however seem to work.
Am I just missing something simple here?
Many thanks,
Allan
Edit - All other health status' match the alerts states and now that the critical issue is resolved the health state matches at a warning level.

Allan,
look at this Kevin's blog
http://blogs.technet.com/b/kevinholman/archive/2008/02/01/configuring-notifications-to-include-specific-alerts-from-specific-groups-and-classes.aspx. This is exactly what I think.
But be aware, this will only solve problem with notifications.
If you get in situations like in your first post you will stil not see health rollup to particular windows computer in case of "The Failed to Connect to Computer". Instead you will see coresponding "Health Service Watcher" in critical state.
This is because class "Windows Computer" does not host class "Health Service Watcher", so health form watcher can't rollup to health of windows computer.
Watcher is something that reside on management servers or in other words MS's are owner of agent watcher instances.
The purpose of these watcher is to show you agent health from "network" perspective...
Regards,
Ivan

JMS Health State

At the following URL it states that the JMSRuntimeMBean and
          JMSServerRuntimeMBeans expose a HealthState via a getHealthState() method
          call:
          http://e-docs.bea.com/wls/docs70/admin_domain/monitoring.html
          From the text of this message is would appear that this health state is
          related to the health of the JMS thread pool:
          "...the JMS subsystem monitors the condition of the JMS thread pool..."
          But after substantial testing it does not appear that the health state
          changes. It has defined 4 levels: OK (0), WARNING (1), CRITICAL (2), and
          FAIL (3), but I have never seen it move to anything other than 0 (OK).
          Here is my test environment:
          JMS Thread Pool set to 2 threads (reduced from 15 to try to observe this
          condition)
          For my Topic I have a maximum message count of 10 (again to try to observe
          errors)
          I have 200 threads sending 224 bytes of data into the JMS topic at 4 second
          intervals. I have observed the byte and message throughput to drop to
          almost nothing with pending bytes and messages, but the health state is
          still OK. Furthermore, with only 2 threads to service 200 requests (backing
          up at some times to 300 concurrent connections? and a default execute queue
          of 50 threads (100% in use) and a queue length of 180), you would think that
          the health state would reflect a problem.
          Any insight?
          Thanks!
          Steve


sorry in health collumn it showing warning , for that deploymnet

How Do I create a health state dashboard for a group of servers in SCOM 2012 R2

I am aiming to create a health state dashboard which would show the agent health for a particular group of server. But unable to find the option for the appropriate widget. Can somebody suggest how should I proceed on this?

There is state widget for show status of computer health or warning or critical
http://blogs.technet.com/b/antoni/archive/2013/05/13/operations-manager-2012-dashboard-widgets.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

[SOLVED] mpd: Failed to stat /var/lib/mpd/music: Permission denied

I've set up mpd according to the wiki.
/etc/mpd.conf:
music_directory "/var/lib/mpd/music"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/run/mpd/mpd.pid
state_file "/var/lib/mpd/mpdstate"
user "mpd"
audio_output {
type "pulse"
name "My Pulse Output"
# server "remote_server" # optional
# sink "remote_server_sink" # optional
/var/lib/mpd/music is a symlink to /home/dennis/Musik/mpd/. I've given the mpd user recursive ownership to both /var/lib/mpd/ and /home/dennis/Musik/mpd/.
When I try to update the database (I've tried both mpc and Sonata), the log says
Failed to stat /var/lib/mpd/music: Permission denied
What permission am I missing?
SOLUTION:
I used the script config instead and it worked flawlessly.
Last edited by snufkin (2013-01-03 00:18:44)

I returned this:
ene 17 21:00:55 ddich systemd[1]: Starting Music Player Daemon...
ene 17 21:00:55 ddich systemd[1]: Started Music Player Daemon.
ene 17 21:00:55 ddich mpd[14061]: output: No 'audio_output' defined in config file
ene 17 21:00:55 ddich mpd[14061]: output: Attempt to detect audio output device
ene 17 21:00:55 ddich mpd[14061]: output: Attempting to detect a alsa audio device
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_card_dri...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_concat r...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer re...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file ...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default
ene 17 21:00:55 ddich systemd[1]: mpd.service: main process exited, code=killed, status=6/ABRT
ene 17 21:00:55 ddich systemd[1]: Unit mpd.service entered failed state.

Custom Monitor Health State Troubleshooting Techniques

Hi,
I have created a Custom Timed Script 2-state Monitor through Ops Console in SCOM 2012 SP1 and the health state is misbehaving and remains Healthy always, even while the unhealthy expression should be evaluated as True.
I have confirmed the monitor is targeted to class IIS FTP Server, as the monitor appears in Health Explorer for FTP Server and is displayed as enabled.
I have used LogScriptEvent in the script to write an event of the results of the script on the agent and the value that will be passed back to the SCOM server, so I also know the script is executing and generating the correct results.
The script returns a numeric value, either 0 or a positive value (ie. no negative value number).
The healthy expression is = 0. The unhealthy expression is > 0.
The returned value represents the number of missing files and when it is for example 12, the health state is not changing to unhealthy and no alert is generated.
I have updated the MP version and confirmed the agent receives the latest version.
I have flushed the agent health state.
I have reset and recalculated the monitor.
I have reviewed agent and server event logs and do not see any related errors.
I have used a simple alert description in case it itself had an error and was preventing a healthy state change.
I have review the xml and see no issue. I updated the monitor xml manually to receive and compare the script value as an integer (instead of the default string type that the gui creates).
I wish I knew how to see the results of the SCOM workflow that determines if a health state change is required.
My next steps in the absence of a better action plan, is to reverse the healthy/unhealthy expressions to see what happens or recreate the MP from scratch.
Any help would be greatly appreciated as I have been banging my head on this one!!

Thanks for the response Andy.
Actually, you are only partially correct. The returned value IS a string by default, however you CAN cast it as an Integer if you export the MP to xml, substitute value String with Integer, and reimport the MP.
Root cause of the issue turned out to be a typo in the parameter syntax used in the health expression.
It was an easy catch once I compared side-by-side a working monitoring against the unworking monitor. Good example of how going too fast can actually slow you down :)
Thanks again for taking the time to respond!

Unable to retrieve topology component health states. This may be because the admin component is not up and running.

Unable to retrieve topology component health states. This may be because the admin component is not up and running.
I have deleted Search Service App and created again.
But still same error can anyone give me check list.. I need it very urgently.
Please reply
Thanks
Raj

Hi Raj,
This issue can be caused by many reasons, so please check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Here are some similar issues and the corresponding solutions for you take a look:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
http://blogs.msdn.com/b/sambetts/archive/2013/08/28/sp2013-win2012-unable-to-retrieve-topology-component-health-states-this-may-be-because-the-admin-component-is-not-up-and-running.aspx
http://techtrainingnotes.blogspot.com/2013/09/unable-to-retrieve-topology-component.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Identifying most recently failed SQL statement

Hi,
We are using Forms 6i
Is there anyway to identify what the most recently failed SQL statement was?
We occasionally have Unhandled Exceptions for which we would like to identify the cause of.
To help do this quickly is there anyway to get Forms to report the SQL statement that failed.
I am sure I saw a demo many years ago where someone simply used Forms to report on the failure rather than writing custom exception code to identify the problem(May have had something to do with the Help button)
Thanks in advance.
Nav

Thank you for your prompt reply.
I am encountering a "FRM-40735 Unhandled Exception"
When I press Shft+Ctrl+E(Display Error) I simply get a FRM-42100( No errors encountered recently)
This seems to contradict the FRM-40735 error.
Currently my fmrweb.res does not map anything to the Shift+F1 key.
What kind of function do I need to map it to?

ConfigMgr 2007 Management Point Health: State

I am getting this, how to fix this issue. SCOM 2012
Any body knows the triage to fix this issue
Manjish

Hi,
Verify that the SMS Agent service is running.
Check the MPControl.log file and component status for MP_CONTROL_MANAGER for more details.
ConfigMgr 2007 Management Point Health: State Rule
http://mpwiki.viacode.com/default.aspx?g=posts&t=119435
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

JTA health state has changed to HEALTH_WARN

Hi 
 I've got the following warning: 
 The JTA health state has changed from HEALTH_OK to HEALTH_WARN with reason codes: Resource OracleStore_1 declared unhealthy.
 
 Can u point out a document, that describes rules of changing JTA's health state ? 
 
 regards
 Lukas 
 WLS 9.2

First of all, it's not likely there is lost data but the proposed solution to delete store directories will destroy data and is not normally recommended. It's much more likely that the data in question never made it into the system as the transactions that inserted data are in the process of rolling back or already rolled back (the exception in the first post indicates the transaction rolled back); or possibly the data is part of an unresolved transaction that has a pending commit.
There appear to be two different problems in this thread and it's doubtful the same solution would apply to both. Based on the minimal information provided:
- (A) check your server log for precursor warnings and errors
- (B) increase transaction timeouts (the global domain default is 30 seconds)
- (C) reboot your WebLogic servers
- (D) ensure your up-to-date on service-packs/patches
- (E) contact customer support
HTH,
Tom

Disk health state dont change OS health state

Hi,
Scenario: SCOM 2012 R2 UR4.
The health state of a disk in a given server dont change the health state at OS.
The health state at disk is warning, but the health state at OS is OK.
The questions are:
Is this behavior normal?
How to configure health state at OS to be the same at disk?
Thanks in advance!

As of i have seen even i have seen such situations in my SCOM 2007 R2 where it shows Healthy event if there are multiple Monitors in a critical state.
Based on my understanding SCOM calculates based on the Dependency monitor.
Example: Best state and worst state.
1.So may be even though that disk related issue is there but that totally does not affect the Health of the Agent.
2.In case if there is any specific service named Service 1 which is in a critical state and there is Service 2 and if Service 2 has also become critical because it depends on Service 1. So because of 1 service multiple services are in a non healthy state,
Then if this is the case at that time the agent may change to a critical state in the dashboard.
May be your current situation is like example 1 and not like example 2 so you are still getting the state as Healthy in the Dashboard.
=============================
Any one please correct me if i am wrong.
Gautam.75801

WEBLOGIC MANGED SERVER HEALTH STATE IS UNKNOWN

Dear Team,
I am working as support engineer in a production environment.
I am facing some issue described below:
1. One of Weblogic managed server health state is WARNING. I have checked in managed server log and found below error:
<Jun 22, 2014 5:13:37 AM IST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "7,222" seconds working on the request "Workmanager: nlsi/wm/MarshallerWorkManager, Version: 0, Scheduled=true, Started=true, Started time: 7222299 ms
", which is more than the configured time (StuckThreadMaxTime) of "7,200" seconds. Stack trace:
As the Health is in warning state managed server become fully unresponsive.
Now I have following query:
1. What is the risk if managed server health state is WARNING?
2. Is Stuck thread will make the server go into an Unknown state?
3. If managed server state in UNKNOWN then what is the risk?
3. Could you please provide any solution so that in future we should not face this WARNING health state.
4. Could you please investigate why this health state WARNING occur?
Please help me.
Regards,
Maity

Dear Team,
I am working as support engineer in a production environment.
I am facing some issue described below:
1. One of Weblogic managed server health state is WARNING. I have checked in managed server log and found below error:
<Jun 22, 2014 5:13:37 AM IST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "7,222" seconds working on the request "Workmanager: nlsi/wm/MarshallerWorkManager, Version: 0, Scheduled=true, Started=true, Started time: 7222299 ms
", which is more than the configured time (StuckThreadMaxTime) of "7,200" seconds. Stack trace:
As the Health is in warning state managed server become fully unresponsive.
Now I have following query:
1. What is the risk if managed server health state is WARNING?
2. Is Stuck thread will make the server go into an Unknown state?
3. If managed server state in UNKNOWN then what is the risk?
3. Could you please provide any solution so that in future we should not face this WARNING health state.
4. Could you please investigate why this health state WARNING occur?
Please help me.
Regards,
Maity

Backup Assistant Service Failed - Sync state not supported by this operation

I have a Samsung Stratosphere running Gingerbread 2.3.5. Recently I tried to use the Backup Assistant app and it gave me the error message:
Service Failed
Sync state not supported by this operation
How do I get it to work again? I can't think of anything that could have caused this. It worked when I first got the phone.

I clicked on "backup my contacts" and they backed up--I see them. Here is
the strange thing: the first person to get back to me told me to disable
the app since it didn't work well with Android. I did that. Two days
later, it started to back up. Huh????? Seems like it is inconsistent.
So, do I just wait until it doesn't work again (dumb question--what else
can I do???). Does this happen to others?
Thanks so much. I am new to Verizon and so far I am pleased and really
like that you got back to me!!
Sincerely,
Fran
On Wed, Nov 21, 2012 at 6:10 PM, Frances Purcell-Abbott <

Failed health state

Similar Messages

Maybe you are looking for