Failed Install of Cumlative Update 1 for SCCM 2012 R2

When installing Cumulative Update 1 in my test lab (with no internet access), the setup goes fine until I get to the part where the wizard says "Create Software Update Catalog" and then it fails with an error. When I re-run the setup the
wizard skips to the parts that were already updated and goes directly to the same part and fails. The failure occurs at the creation of the software update catalog.
I have been searching the web, but have been unsuccessful in finding a solution to my problem. I am wondering if it is because my test lab does not have internet access or something permission based regarding the SCCM network access account. I
am kind of at a loss right now and any assistance is greatly appreciated!
-Tony

Hi Jason!
Here is the error from the cm12-r2cu1-kb2938441-x64-enu log file located in the %windir%\temp directory. The same file on the root of C has also has the same error. I have been searching the web for possible solutions all day, but have came up
empty. Any suggestions?
“Task ‘Create Software Update Catalog’ completed, state is ‘failed’ ExceptionText: Error: Setup detected an unexpected problem during installation. Error message: A valid file name is required.
Parameter name: fileName
Error: Setup detected an unexpected problem during installation. Error message:    at Microsoft.SystemCenter.UpdateSetup.SystemUtilities.CalculateSHA1Base64(String fileName)
   at Microsoft.SystemCenter.UpdateSetup.Tasks.GenerateCatalog.ReplaceCommonInsertionStrings(String startText, String packageFile)
   at Microsoft.SystemCenter.UpdateSetup.Tasks.GenerateCatalog.GetServerUpdateXml()
   at Microsoft.SystemCenter.UpdateSetup.Tasks.GenerateCatalog.DoRun()
   at Microsoft.SystemCenter.UpdateSetup.Tasks.GenericTask.RunThread(Object taskObject)”
P.S. I just got my account approved, so I added a couple of screen shots to my original post.
–Tony

Similar Messages

List of recommended hotfixes/updates for SCCM 2012 R2 agents?

Hopefully I ask this correctly.
Is there a list of recommended hotfixes or updates for SCCM 2012 R2 agents? Things like .Net or WMI updates.
I am seeing the occasional agents lose connectivity, and I want to make sure I have a complete or recommended list of non-SCCM hotfixes before I move forward.
Thanks!
Andy

To my knowledge there aren't really any kind of recommended hotfixes to apply before a client installation, except for the prerequisites (that the client installs by itself). But as a best practice, always make sure that a client is up to date when it comes
to patches.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

Installing MS Office Updates using SCCM 2012 patch management.

Hi,
We have SCCM 2012 in our customer environment, we would like to deploy MS office 2012 non-security updates using SCCM patch management. Can someone help me how to configure non-security updates on SCCM 2012 and deploy the same.
Regardsm
Madhan

The process of deploying non-security updates and security updates are the same.
As a side note:
To reduce the numbers of required updates, you can also download service packs, and other updates (msp files) and copy them to the update folder of your Office installation source. Then they will be installed as part of the Office deployment process.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Unable to install Cumulative Update 2 for SCCM 2012 R2

Hi,
I am trying to install the CU2 update for SCCM 2012 R2 and I am getting the following error during prerequisite checks:
Server update status: This update applies to product version 5.0.7958. The installed version on this computer is 5.0.7804.1000. This update is not applicable to this computer.
Console update status: No serviceable configuration manager role was found on the local system.
Can anyone provide me some guidance or thoughts on how to get to the correct version to install this update?
Thank you

You are running
ConfigMgr 2012 SP1 – 5.00.7804.1000 - build 7804
The CU2 you are trying to apply is for SCCM 2012 R2.
http://www.systemcenterdudes.com/sccm-2012-version-numbers/
For SP1 the latest CU is CU5 : http://support.microsoft.com/kb/2978017/en-us
Benoit Lecours | Blog: System Center Dudes

Cumulative Update 4 installation for SCCM 2012 R2

Hi all,
This is my first time installing a CU update on SCCM 2012.
We have an environment with 15 Servers, 1 is a Primary and the other are Site System Servers.
Would I need to install the CU4 update only to the Primary server? or would I have to deploy the CU4 to the other 14 Site Systems Servers.
I've been reading the following
http://support.microsoft.com/kb/3026739
http://dekeukelaere.com/2014/01/30/implementing-configuration-manager-2012-sp1-cumulative-update-4/
http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
And also if they don't have CU3 on them would I need to do that first, or would
CU4 encompass previous updates.
Cheers for any help on this matter.

When they're only site systems with a role installed than those roles will be upgraded with the primary site installation. Here is one of the many nice posts about the installation process (and order):
http://www.scconfigmgr.com/2015/02/03/install-configmgr-2012-r2-cu4-in-your-hierarchy/
Also, you don't have to install CU3 first.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

I am attempting to install the latest update for Photoshop CS6 and it failes. Message U44M1P7

I am attempting to install the latest update for Photoshop CS6 and it failes with a message U44M1P7. I have a one year cloud subscription for this that expires in 2014.

http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

HT5654 Trying to install the latest update for itunes...error received "service apple mobile device failed to start. verify thay you have sufficient priveleges to start system services"...? I have unistalled and tried to reinstall???

Trying to install the latest update for itunes...error received "service apple mobile device failed to start. verify thay you have sufficient priveleges to start system services"...? I have uninstalled and tried to reinstall???

Hello Kimberly0914,
It sounds like you have tried to launch iTunes after a recent update due to this error message, and you cannot install iTunes after uninstalling. I recommend the troubleshooting from the following article to help you named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Then download and install iTunes with this link:
http://www.apple.com/itunes/download/
Thank you for using Apple Support Communities.
Cheers,
Sterling

Using a custom certificate store for SCCM 2012 clients and primary site server

I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.

Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion.

Pre-requisites for SCCM 2012 R2

Hi Experts,
I want to know is it mandatory to install and configure WDS, WSUS and MDT before deploying SCCM 2012 R2
Are the Above roles prerequisites....????
What would be the possible pre-requisites for SCCM 2012 R2..???

For the pre-requisites, you can refer to the article that Torsten already shared.
As Torsten already mentioned, the installation of WDS, WSUS and MDT is optional. However, if you are planning to do OS Deployment (OSD) then consider installing WDS and MDT (Of course, you can install MDT if you would like to take advantage of its use).
As for WSUS, you can consider installing it if you would like to ensure a central management of Software Updates. So, depending on your requirements, you can decide what to do.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Client not receiving the software update FROM SCCM 2012 R2

We have SCCM 2012 R2 installed and configured for SUP.and i have synchonice the SUP with WSUS server in the same which is there in the same machine.
Now i can able to deploy the software update from SCCM 2012 R2 without any erro to the windows 7clients, but client side when i check there is no update installed in the clients , but seems there is no error in the client logs

Hi,
I'd start with running a "Software Updates Scan Cycle" from the configuration manager control panel applet and check the log file Windowsupdate.log, WUAhandler.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Pre-provision TRK for SCCM 2012 R2 client

Hello,
Clients have some troubles with establishing trusted relationship with management point, I found this article http://technet.microsoft.com/en-us/library/bb680504.aspx but this for SCCM 2007, where can I find for SCCM 2012 R2?

Do you have AD extended and is the site information properly published to AD in the System Management container?
What happens when you manually "push" a client?
What exactly is the entire command-line you are using to install the client?
The message above is not about the trusted root key, it clearly shows that MP being communicated with is not in the MPLIST returned. I can't say I've ever seen that before, but it is indicative of some other configuration type error.
Jason | http://blog.configmgrftw.com
Hello,
thank you for your message,
yes, AD was extended and System Management container has site info,
I have the same problems with push and manual installation,
I tried this command (specify key and site server cert and without it): C:\Client\ccmsetup.exe /mp:SCCM /logon SMSSITECODE:CM1 SMSPublicRootKey=<key> SMSSIGNCERT=<path to cert>
where <key> from a file and cert which was exported from site server.
Where MPList is stored? We spent much time to solve this problem, even reinstalled SCCM on new servers with new site code but problem is not solved.
After installation client tries to register on management point but there are errors in the different logs at same time:
Failed to verify signature of message received from MP using name 'SCCM.contoso.com.'
Failed to verify message. Sending MP [SCCM] not in cached MPLIST.
RegTask: Failed to send registration request message. Error: 0x87d00309

Trouble Deploying Windows updates via SCCM 2012

Hello
I'm testing Windows updates via SCCM 2012 - I have successfully deployed updates to 4 test PC's.
I then added another 15 Test PC's into the same group - Not one of them receive updates (they're all within the same Domain and even in the same room)
I reviewed "UpdatesDeployment.log -
1. I highlighted some points that stood out to me
2. I have the Maintenance window set to 24hours for this test
From the Server side and Clients side - What are the best .logs to look at.
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Suspend activity in presentation mode is selected   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Proceeding to non-business hours activites as presentation mode is off.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Attempting to install 0 updates   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
No actionable updates for install task. No attempt required.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Updates could not be installed at this time. Waiting for the next maintenance window.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)

Hi,
You could also check Windowsupdate.log on the client.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Distribute Customer Updates in SCCM 2012 (CU's) using a Task Sequence

I want to utilize a Task Sequence to Distribute Customer Updates to SCCM 2012 Clients. I currently have 2 collections for pre-CU 4 clients, one for 32 Bit Clients (x86) , one for 64 Bit Clients (x64). I have a package pertinent to each collection
which I use to distribute the updates.
However, instead of segregating them by collection, I would like to have one big collection, and have the Task Sequence sort out which package should load on which collection.
I've tried using the RUN COMMAND LINE, and INSTALL PACKAGE options to no avail. Is there a way to utilize a Task Sequence for this undertaking, or should I just continue the way I'm currently doing it.
Thanks ,
Dan

You can set Collection Variables for the two collections, then add running condition in the Task Sequence Steps for corresponding collections.
Juke Chou
TechNet Community Support

Configuring Reporting services for SCCM 2012

Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,

Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Failed Install of Cumlative Update 1 for SCCM 2012 R2

Similar Messages

Maybe you are looking for