Failed installation - Missing patch
I have used several Adobe products for years. I received a PDF file. It failed to print. I tried downloading a new reader several times. I consistently get a 'ERROR' Failed to access installation patch, please verify existance or contact Adobe.
I tried using the above cleaner as sugested. When I tried reinstalling using your sugestion also above it - failed. It said that I had a later version. I had version 11.03.
I contacted Adobe again but just got a run around as it was a free product. I have had many Adobe products over the years and as a new version was developed I down loaded it. Acrobat, Reader, Photoshop, Flash player etc. How I discovered the problem was when I tried to open and print my Turbo Tax return. A search for Adobe products revels 94 files in existance!! Adobe asked for a serial number that I couldn't find so they said GOOD BY.
Similar Messages
-
Failing installation - Missing system mailbox accounts
I had installed Exchange 2013 SP1 and it seemed to be working correctly. I installed CU7 and everything fell apart. Massive errors all over the place. I gave up and removed all mailboxes, removed the databases, and uninstalled Exchange 2013. I then
went into ADUC and manually removed the remaining system mailboxes.
I reloaded a brand new install of Server 2012 R2 (same name as previous exchange 2013 install) and I went to install Exchange 2013 again. I ran it from the GUI and did not run /PrepareSchema or /PrepareAD in advance. My understanding was that
running the GUI would do this and since the prepare schema switch in particular is unnecessary since the schema was already updated from the previous install I did not worry about it.
Install fails with:
Error:
The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Microsoft.Exchange.Management.Tasks.RmsSharedIdentityUserNotFoundException: RMS Shared Identity user FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 not found.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow)
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.Link()
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
So yes the federated mailbox referenced above does not exist. As I said I thought the install would have run the /PrepareAD steps and created it. So I try and run the setup /PrepareAD myself to generate the system mailboxes and that fails:
PS C:\Users\administrator.mydomain.local\Downloads\Exchange2013cu7> .\setup /PrepareAD /IacceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 7 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Client Access role: Front End Transport service
Client Access role: Client Access Front End service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites
COMPLETED
Prerequisite Analysis
FAILED
A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just thi
s role, or remove the role using Control Panel.
For more information, visit:
http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InstallWatermar
k.aspx
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
So looking in the ExchangeSetup.log I find this:
[12/22/2014 23:32:27.0524] [1] User specified parameters:
[12/22/2014 23:32:27.0524] [1] Beginning processing Get-SendConnector
[12/22/2014 23:32:27.0587] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[12/22/2014 23:32:27.0587] [1] Request filter in Get Task: (&(objectCategory=msExchRoutingSMTPConnector)(|(&(msExchVersion<=1125899906842624)(!(msExchVersion=1125899906842624)))(!(msExchVersion=*)))).
[12/22/2014 23:32:27.0665] [1] Previous operation run on domain controller 'DC1.mydomain.local'.
[12/22/2014 23:32:27.0665] [1] Preparing to output objects. The maximum size of the result set is "Unlimited".
[12/22/2014 23:32:27.0696] [1] Ending processing Get-SendConnector
[12/22/2014 23:32:27.0696] [1] Evaluated [Rule:SendConnectorException] [HasException:False] [Value:"False"] [ParentValue:"System.DirectoryServices.ResultPropertyCollection"] [Thread:41] [Duration:00:00:09.9289411]
[12/22/2014 23:32:27.0696] [1] Finished [Rule:SendConnectorException] [Duration:00:00:09.9444335]
[12/22/2014 23:32:27.0712] [1] Evaluated [Setting:PowerShellExecutionPolicy] [HasException:False] [Value:"False"] [ParentValue:"<NULL>"] [Thread:45] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Finished [Setting:PowerShellExecutionPolicy] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Evaluated [Rule:PowerShellExecutionPolicyCheckSet] [HasException:False] [Value:"False"] [ParentValue:"<NULL>"] [Thread:45] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Finished [Rule:PowerShellExecutionPolicyCheckSet] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0727] [1] Finished [Analysis:Prereq] [Duration:00:00:10.2101752]
[12/22/2014 23:32:27.0743] [1] Failed [Rule:InstallWatermark] [Message:A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just this role, or remove the role using Control Panel.]
Stuck. Can't finish install, can't uninstall.
I should also mention. I have a working Exchange 2007 server in the environment.Holy guacamole! I was able to finish the setup.
When I ran setup /PrepareAD I also ran /PrepareSchema and /PrepareDomain but I did it in the usual order: PrepareSchema first, PrepareAD second and PrepareDomain third.
I figured, “can’t hurt, might help.” The schema theoretically should have already been extended when I installed CU7 onto my SP1 install. But as I posted here:
https://social.technet.microsoft.com/Forums/office/en-US/2de87b3f-52e4-4c1c-8f18-421f948d41c3/seemingly-successful-install-of-exchange-2013-sp1-turns-into-many-errors-in-event-logs-after-upgrade?forum=exchangesvrdeploy#697e5abf-180b-4d78-b841-b5a46cb1ee63
that did not go well.
I noticed lots of event log entries on the DC saying the schema had been modified.
That may be normal even if running PrepareSchema again but I wonder if it was not an indication that the schema had actually not been extended from SP1 to CU7 after all.
What was common to both of these problematic installs of CU7 was that I had simply run setup and not done the preinstall switches.
The Exchange installation wizard is supposed to do this but I am now wondering if the wizard for CU7 actually does not.
If CU7 had made the configuration changes on the exchange server without doing whatever changes were necessary from the preinstall switches, that might help explain why it all went wobbly (in the technical sense) after the CU7 install on my first server.
Sadly though I see many of the same error messages in the event log that I was seeing on my first install. -
Failed download error message and missing patch message, why?
For the last couple of days I've been trying to download premiere pro cc and the first time I got a message saying 'missing patch' and I needed to update. I clicked on the update but it kept failing. SO, I uninstalled premiere and adobe cloud and tried to reinstall them. Everything was fine for the cloud installer but now, I keep getting 'Dowload error' message for premiere pro.
What is wrong?
I'm using the latest macbook pro 15" retina display.
thanksAny ideas on how I get in touch with a real person online to answer some questions instead of filling in random chat forms? This is getting old really fast....
-
Failed Installation when installing a Patch
Version: Sun One Web Server 6.1 SP8
OS: Windows 2003 SP2
I am trying to install a patch (it seems that this problem is happening no matter what patch I install) and towards the middle of the installation I get the following error:
"1628: Failed to complete installation"
The install goes through these steps before I get the Error.
-Configuring Windows installer
-Extracting patch-id.msp
-Extracting ISScript1150.msi (hangs half way here for about 10sec)
-then Error
If I try to run the patch-id.msp file the install creates on the temp directory I get the following message:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on yuor computer and that you have the correct upgrade path."
Any help is appreciated, Thanks!Hey,
I've got the same problem and was wondering did you ever get to the bottom of it?
Cheers,
Fintan -
When installing Indesign from the Adobe Cloud, it says that it cannot be completed because of a missing patch. what do i do?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Failed to install patch 126411-01
I had patched my system using smpatch but failed.
#uname -a
SunOS SunOS 5.10 Generic_138889-08 i86pc i386 i86pc
#smpatch analyze
You have new messages. To retrieve: smpatch messages [-a]
125556-03 SunOS 5.10_x86: patch behavior patch
126411-01 StarOffice 8 (Solaris_x86): ARCH patch to enable install of >= Update 6
120186-17 StarOffice 8 (Solaris_x86): Update 12
# smpatch update
You have new messages. To retrieve: smpatch messages [-a]
125556-03 has been validated.
<font color="#3366ff">
126411-01 has been validated.
120186-17 has been validated.</font>
Installing patches from /var/sadm/spool...
125556-03 has been applied.
<font color="#3366ff">
Failed to install patch 126411-01.</font>
Utility used to install the update failed with exit code 8.
Validating patches...Loading patches installed on the system...Done!Loading patches requested to install.Done!The following requested patches have packages not installed on the systemPackage SUNWstaroffice-core01 from directory SUNWstaroffice-core01.i in patch 126411-01 is not installed on the system. Changes for package SUNWstaroffice-core01 will not be applied to the system.Package SUNWstaroffice-core01 from directory SUNWstaroffice-core01 in patch 126411-01 is not installed on the system. Changes for package SUNWstaroffice-core01 will not be applied to the system.Checking patches that you specified for installation.Done!The following requested patches will not be installed becausethe packages they patch are not installed on this system. 0 No Packages from patch 126411-01 are installed on the system.No patches to install.
<font color="#3366ff">
Failed to install patch 126411-01.
ALERT: Failed to install patch 126411-01.
Failed to install patch 120186-17.
</font>
Utility used to install the update failed with exit code 2.
......The StarOffice patches are most likely being recommended as there are one or more SUNWstaroffice packages installed on the system, but the patch installation cannot complete due to an incomplete installation of StarOffice. Check for any installed StarOffice packages and remove them if present:
# pkginfo | grep SUNWstaroffice -
Patchadd interrupted - now failing to install patch correctly
I had started a patch installation when one of my kind users compromised the system by filling all available swapspace.
I tried tto get into the system but failed. After about 10 minutes I did - what I should have avoided to do - a control C on the
unresponsive patchadd command.
The result is that the patch is not committed, but also not removed. The system's response to a patchrm is
beron# patchrm 127144-03
Validating patches...
Loading patches installed on the system...
Done!
Checking patches that you specified for removal.
Done!
Approved patches will be removed in this order:
127144-03
The installation of patch 127144-03 was interrupted.
Patchadd needs to be re-invoked to ensure proper installation of the patch.
Patchrm is terminating.
WARNING: patchrm returned <14>
And if I intend to do a re-install on the patch itself I get
oberon# patchadd 127144-03
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
The following requested patches are already installed on the system
Requested to install patch 127144-03 is already installed on the system.
No patches to check dependency.
Any suggestion on what I could do to tidy the system up, would be very welcome.lance is already taken wrote:
I have uninstalled and reinstalled some more.
The following do not work:
Apple Bluetooth
Apple Trackpad
Apple Keyboard
Apple Remote (IR Receiver)
I still cannot use the F keys.
Also, OS X does not seem to recognize that I have bootcamp: I cannot select it in the start up disk area. VMWare cannot prepare my Boot Camp partition as a virtual machine. Why am I encountering so many problems?
Edit: Oh and the Built in iSight doesn't work either. Awesome.
You should solve one problem at a time.
If your system does not recognize Windows, don't start playing with VM ware or Parallels. You don't fix something by bypassing it.
If you cannot boot into your Windows partition using bootcamp, that that's the first thing to fix. -
Smpatch update ALERT: Failed to install patch
I do not even know where to start. Since installing Solaris 10 0606 it
seems every time I try to patch the system I get failures of one type
or another. One problem today has to do with zones:
"To install the new instance of this package in all zones you must
first remove the existing instance of this package from the global
zone first (via pkgrm) and then install the new instance of this
package in all zones."
If sun already knows a pkgrm must be run why can't the smpatch command
just do it?
Another problem seems to be
For patch 121018-03, required patch 120759-04 does not exist
If sun knows a patch is required which is not on the system just Getit
and install it.
Also, what is up with having to reboot the box to install patches?
Why? Has this always been a required step? Do these reboots pertain only to kernel patches .etc?
I have seen other postings in this forum expressing unhappiness with
the patch system, some mentioning testing lab/group or certification
issues. I think smpatch should have an option to send smpatch results
back to sun for review. That way the Certification Group could have
real life situations to investigate. Or do they know the problems
already and just dont want to fix them? Just once I would love it if
smpatch came back with no failures and I was assured the system was
patched, up to date and secure.
Regards
# smpatch update
Update 120759-07 will not be downloaded since it already exists in the
download directory.
Update 121018-03 will not be downloaded since it already exists in the
download directory.
Update 121016-03 will not be downloaded since it already exists in the
download directory.
Update 121020-02 will not be downloaded since it already exists in the
download directory.
Update 121616-02 will not be downloaded since it already exists in the
download directory.
Update 120762-02 will not be downloaded since it already exists in the
download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 120759-07.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120759-07 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120759-07 are not installed on the
system.myzone2: Packages from patch 120759-07 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120759-07 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120759-07 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120759-07 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120759-07/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120759-07.
Failed to install patch 121018-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121018-03,
required patch 120759-04 does not exist.No patches to install.
ALERT: Failed to install patch 121018-03.
Failed to install patch 121016-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121016-03,
required patch 120759-06 does not exist.No patches to install.
ALERT: Failed to install patch 121016-03.
Failed to install patch 121020-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121020-02,
required patch 120759-01 does not exist.No patches to install.
ALERT: Failed to install patch 121020-02.
Failed to install patch 121616-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:121616-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 121616-02 are not installed on the
system.myzone2: Packages from patch 121616-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:121616-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:121616-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 121616-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/121616-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 121616-02.
Failed to install patch 120762-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120762-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120762-02 are not installed on the
system.myzone2: Packages from patch 120762-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120762-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120762-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120762-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120762-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120762-02.
/var/sadm/spool/patchpro_dnld_2006.08.22@11:16:20:EDT.txt has been
moved to
/var/sadm/spool/patchproSequester/patchpro_dnld_2006.08.22@11:16:20:EDT.txt
#Enterprise users have strict policies on change management so dependent patches are not automatically installed when using "smpatch add". Neither are packages blithly uninstalled for zones if currently only existing in the global zone.
For your needs using "smpatch update" should analyse, download and install dependant patches in order for patches specified on the command line or for a global update. Note that that is with the exception of patches not matching the currently defined patch policy such as those needing a reboot. See the smpatch man page for information on policies.
Patches requiring reboots or being installed in single user mode are primarily for kernel and driver patches.
Your problems installing the Sun Studio 11 patches have been encountered previously in regards to globally installed packages (and are covered in this forum) and is due to a combination of bug ID's 6337009, 6214678 and 6374972 for the patching utilities of which the last is still open.
You will currently have to manually install the patches using patchadd with the "-G" flag whilst in the global zone to install them in the global zone only. -
Homesite5.0 fails installation in vista
homesite5.0 fails installation right away after giving me
error:
in function sdcomponenttree unable to create dialog
then gives me a blank error box
then a series of blank abort/retry/ignore boxes throughout
installation
creates start menu dir, but no shortcut
does not copy files, does not create program files dir.
tried running as administrator, tried setting setup file to
xp compatibility to no avail.
anyone have experience with this problem?Hi Bill, yes, I can do that. Created one several levels deep.
I assume you mean HS is running on Vista. It's not clear if you're
problem is in creating that directory on RDS remote host (from a HS
client running Vista) or specifically in also creating the
directory on an RDS remote host (or localhost) running Vista. I was
able to create a directory several levels deep on both a remote
machine (not running Vista) and my localhost running Vista, both
via RDS.
I'll add, FWIW, that I'm running HomeSite+ 5.5 (not HomeSite
5.0). If you (or others) really are still on 5.0, there's at least
a free update to HS 5.2 (
http://www.adobe.com/cfusion/resourcecenter/resourcecenter.cfm?pagename=hs%5F52%5Fupdater& loc=en%5Fus&)
To update to HS 5.5, it would cost a HS 5.0 customer US$29.
More at
http://www.adobe.com/products/homesite/productinfo/upgrade/
That said, no release of HS specifically lists Vista as
supported (see the requirements page, which lists Win2k3 as tha
latest OS specifically supported):
http://www.adobe.com/products/homesite/productinfo/systemreqs/
I'll point out as well that if one has Dreamweaver 8, that
includes HomeSite+ 5.5 free on the CD (you use the DW license to
register it).
If anyone would ask about the difference between HomeSite and
HomeSite+, I'd point you to a blog entry I did (one of many, by
myself and others over the years):
http://carehart.org/blog/client/index.cfm/2007/10/23/homesite_homesiteplus_and_adobe_eclip se_ext
Hope that's helpful. -
Windows 8 64-bit, failed installations and RAID 1 resync on HP ENVY h8-1520z
I recently purchased an HP Envy h8-1520z with a single SSD and 8 GB RAM running Windows 8 Pro 64-bit. I installed 2 Western Digital 500 GB WDC WD5000AAKX-001CA0 HDDs on SATA ports 5 & 6 and configured them as RAID 1 in the BIOS. I have started installing apps on the RAID 1 array (E since the SSD is only 256 GB.
While installing software, some install fine, but often the installation hangs with no errors indicated and I have to kill the installer task through task manager. I usually follow that with a system shutdown or restart and almost every time that results in a resync of the RAID array. Sometimes the shutdown or restart is quick, and other times it takes several minutes with intermittent disk activity as indicated by the drive light. I have sometimes given up after 10 minutes or so and powered down by holding down the power button. I can understand a resync after the forced power down, but it seems that all it takes to cause a resync is a failed installation, and that seem to happen a lot, even with software that explicitly says it is Windows 8 compatible. Sometimes the applications run fine even after an apparently failed installation and other times not so much.
Has anybody else seen this behavior or have any suggestions? I’d like to get this sorted out before I load any more software.Hi,
Did you check each hard drive for straps? There should not be any straps installed on the hard drive. These drives do have strapping posts.
Did you use the AMD RaidExpert to create the array volume? Did you wait until the RAID migration was complete before using the array volume?
Check the AMD RaidExpert for errors. It's possible that you have a bad hard drive(s).
Many applications want to be installed on the C drive. Your SSD is 256GB so you should have plenty of space for most applications and the application performance will be improved. Use the RAID 1 array to keep and store your data. The mirroring process of RAID 1 will protect it in case one hard drive fails.
You might want to consider removing all of the data etx.. from the array, use the AMD RAIDExpert to delete out the array volume. I would then run for hard drive diagnostics. If the hard drives are free from errors then use disk management to separately reformat each hard drive. Now go back to the AMD RaidExpert and create your new array volume.
Be sure to review the software and bios updates for your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Failed installation: How to rerun Adobe Application Manager updates for Photoshop CS6
Hi.
The installation of Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did intall. I was installing Adobe Reader X .
That's why I discovered the notication from the application manager about updates for CS6 - and I just confirmed that as well.
Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifiying me again to install it. At least not immediately ...
So how do I rerun the Adobe Application Manager update moduel to check for updates manually?You go Photoshop CS6 > Help > Updates ...
-
Installation failed installation completed through some components failed to instal correctly
Hello i've been really exited to donload photoshop and so i decided to try the free version i downloaded creative cloud and went into th eapps and click on photoshop try it free i waited a few 30 mins and it stopped and told me this
installation failed installation completed through some components failed to instal correctly.
and then i was like whatttt?!?!?!?!?
so I decided to come here and ask why this is happening please answer ASAP I really need photoshop for important stuff!!!Try restarting your computer, then try again. Awhile back, some of the apps which I think included photoshop require the microsoft runtime to be updated. That runtime requires a restart to finish installing. But since it is a piggyback program, the error code telling you do so is hidden in the log file.
If it still does not install let us know. -
"Installation failed; Installation completed though some optional components failed to install correctly. (6)"
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86).
Any ideas on how to fix this problem?Go to Control panel>> Uninstall a program>> Uninstall Microsoft Visual C++ 2012 and restart the machine.
After restarting try the installation. -
Oracle Initialization Failed -- likely missing libraries/dlls
Hi,
I've installed MDM 5.0 server with oracle 10.2 as the database on Windows 2003 server.
When I try to create a repository for the first time I'm facing the following issue "Error initializing database engine"
The log says:
Oracle Initialization Failed -- likely missing libraries/dlls
OCI Init
ERROR CODE=0 |||
Last CMD:
I'm able to connect to the database through SQL plus also the tnsping tests are successfull.
Please let me know your ides to resolve this issue.
Regards,
VaradhuHi Varadharajan,
Can you provide the detailed steps performed to resolve the issue.
Even we have installed MDM 7.1 SP 10 Oracle 11.2.0, But we have 3 SAP instance running on the system:
1) SRM:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
2) CRM:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit
3) MDM:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
when the server is restarted the MDM is not able to connect to the Database.
Thanks to provide the exact steps of execution.
Regards,
Prajakta Patkar -
Setups in Database installation or patch application
Hi all,
In the database installation or patch application, in the unzipped directories you have multiple
setup.exe files along with oui.exe.
For example: in 10g
you have one setup.exe under directory 10gR2_server\database
also you have one setup.exe and one oui.ex under directory 10gR2_server\database\install.
I am wondering what are the differences among those setup.exe and oui.exe. Sometimes we tried the setup.ex in one directory it throw some error and tried another one it works. I am kind of confused.
Thanks a lot for your help,
ShirleyHi Shirley
As far as I know setup.exe is starting the Oracle Universal installer and the oui.exe is called by the setup.exe.
Sometimes your can perform silent install as this:
oui.exe -waitforcompletion -nowait -force -silent -responseFile response_file.rsp
Regards,
Hub
Maybe you are looking for
-
I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?
-
Infomation Broadcasting with Email Bursting with hierarchy
Hi, We have a scenario where based on the employee hierachy, we need to use email bursting. We have following emplyoee hierarchy. Employee_Manager -> Employee_1 -> Employee_2 The infocube contains data for expense made by each employee. So if emp
-
I installed Elements 9 on my MacBook . I have a multi license How do I reinstall on on an iMac (with no CD drive) ?
-
Time Machine errors with WD My Book Studio
I upgraded the OS on my 1.66 GHz Mac Mini to 10.6 in January and purchased a 1TB WD My Book Studio external drive, to replace an older WD drive. The new drive was connected to the Mac via FireWire and reformatted for Mac OS extended before I copied m
-
Old Texts arrive after each restart
Hello, I have a blackberry torch v6.0.0.246. Each time I restart it the same 8 or so texts pop up. They are older texts that do not show up in my inbox. I've taken out the battery and reinserted it and even reset the device back to the factory settin