Failed iOS7 update -- then iPhone could not be restored error 27
Hello community
I tried to upgrade t0 iOS7 on my iphone4s via USB itunes connection. It finished downloading and then error box came up saying "iphone could not be updated
'. then the phone was stuck on apple logo and i reset the phone and now its in recovery mode. itunes tell me to restore my phone but error box keeps on popping up with "iphone could not be restored error 27". tried everything...reinstalled itunes, disabled firewall/security and nothing's working =((((
HALLP
Hi.
Ipad 3 wifi a1314 here failed while upgrading to ios 7 over wifi. After that, it is stucked on recovery mode. Itunes is latest 11.1.3 and firewall my pc is off, antivirus off and I keep on getting error 27
What does this error mean?
Restoring ipad software bar on itunes compleates
verifying ipad software compleates
but fails verifying ipad restore on error message The ipad "iPad" could not be retsored. An unknown error occurred (27)
The status bar on the IPad device (under the logo) stucks on about 85%
The local Ipad service that was supposed to be applec certified simply did the same and said cannot fix withough no explanation what is worng with the device.
I am a bit dissapointed because the device is 1,5 years old only.
Similar Messages
-
after loading in the new 6.1 software on my iphone4 is locked on the plug into Itunes pic.then "iphone could not be restored. The device isn't eligible for the requested build
Any Error messages or Alerts...?
-
hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29
l3az wrote:
... got a message the iphone could not be restored error occurred 29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart -
HT201210 Iphone could not be restored error (1604).
I updating ios6 but i can't itunes shown Iphone could not be restored error (1604) and i can't open the device.
It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.
-
HT201210 iphone could not be restored error no 1015
iphone could not be restored error no 1015
massege recieved while updating
mobile could not startSearch!!!!!!
http://lmgtfy.com/?q=iphone+error+1015 -
The iphone could not be restored error 23
**Hello to all I have a iPhone 3gs 3.1.3 Suddenly went Network and i Switched off the devices and turn it on again prepared But not open network and mark appears cable & iTunes And worked restor but an error message appears the iphone could not be restored 23 .**
**The iPhone still does not function with the flag whenever two devices the same problem .**
**Please help**
*thankss*Error 23 is generally a hardware failure. If under warranty, make an appointment at an Apple store or contact whoever handles warranty & support where you live. If out of warranty, google third party repair shops in your area. You will not be able to restore with a hardware failure. To confirm, try restoring on a known good computer, if you get the same error message, you have a hardware failure.
-
Iphone could not be restored error 1669
Instead of my network provider, my iPhone displays 'Searching...'. I tried to reset through my iTunes and my phone but could not due to Find My iPhone, so I went onto Find My iPhone on my computer and erased my phone thinking it would be like a factory reset. I have tried restoring the device but everytime I try I get Error 1669 and the restoration crashes on 'Restoring iPhone's Firmware' I was just wondering what I could do to get the phone back to before I erased it. Any help would be appreciated, Thanks.
Hello, KBAKA.
Thank you for visiting Apple Support Communities.
Error 1669 can be similar to error 1. Try the troubleshooting steps for error one as outlined below.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm yoursecurity software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Jason H. -
Iphone could not be restored error?
Trying to do routine update on my iPhone 4. Then was prompted to restore my phone to original settings. Went through 3 hours of that, then an error occured saying unable to restore the phone. Now, I can't do anything with my phone. Tried disconnecting from iTunes and restarting both my phone and mac book pro. No luck. Tried to get help on the apple support website, but the only options were to speak to somoeone over the phone- which can't happen right now since it's not working right now. Freaked out and phone less.
From the support document that I provided you earlier:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service. -
hello:
i have an ATT sim card in the phone, then i get this error message, Error 1015I got the same error as well, and what people say to me is that error 1015 is most likely caused when you have your phone hacked/unlocked unauthorized in other words like jail breaking or trying to downgrade or upgrade with means OTHER THAN or not through upgrading through itunes or however appple authorized procedure
-
My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help
My iPhone 3GS is getting the same error. I've called Apple a bunch of times, and they won't get back to me. I'm searching through discussions to figure out a solution.
-
when i try to update my iPhone 3G software, the message alert showing (The iPhone ''iPhone'' could not be restored. An unknown error occurred). now my iPhone 3G blank display. how can i do then please?
I was not sure about the ''jailbroken''. now my iPhone cannot use, on the showing (connect to iTunes logo). so if i just want my iPhone process in normal, what can i do? i mean i want it back to the previous software version?
-
i have an apple 3g, tried to upgrade it to a 4.2 version, (previously it was 4.1). it wasnt successful, the computer asked us to restore it to the version which was last operational, and while restoring an error message appeared "the iphone could not be restored, an unknown error occured
"This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."
Taken directly from this article http://support.apple.com/kb/TS1275.
Plug your iPhone into iTunes and update it to the latest supported version, which is 4.2.1.
- Greg -
I followed all the steps for the restoration of my iPhone4 after updating, but after going through the whole process for restoration successfully and while preparing iPhone for recovery at the final stage of restoration, the system gives the following error message: the iPhone "iPhone" could not be restored. An unknown error occurred (4013) and my iphone requires itunes..
iPhone 4, Windows xp, The set automatically stopped workhttp://lmgtfy.com/?q=iPhone+error+code+4013
-
During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
when I power on it shows go itune logo starts. Then I tried to download restore and update it shows Tunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then an unknown error occuired(1604) shows.an unknown error occuired(1604). Please help me and how can I restore the phone OS. Regards
It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.
Maybe you are looking for
-
Any one know how to fix this issue
-
Audition CS6 deleting/trimming issues
Hi All, I'm experimenting with CS6 in an effort to replace Audition 3.0 which crashes all the time lately. I noticed that several features work different and I can't find the way to make them work correctly. - In waveform mode, if I trim a recorded a
-
Multiple proces trying to use WiFi kills WiFi.
I'v had the weirdest issue for the longest time.. If 2 or more process try to use the WiFi at the same time, the WiFi performance just dies.. example: Start transfer of 1 file to NAS.. Goes at 2.5MB/s Start a 2nd transfer to NAS.. Performance drops t
-
i wonder what is wrong with my Imac i get shocks from both the the body and from my keyboard... not so pleasant... what can i do
-
Powerbook wont recognise 10.3...I'm stumped
Hi all, I bought a 15"PB G4 1.33Ghz off ebay (ok you take your chances!). It booted in 10.3. I updated to 10.4 but with the combo update it would not boot again. No probs I thought, so I formated the HD to be safe forgetting I only had an upgrade dis