Failed iphone 5 setup

Help! I would like to move my data from my iPhone 4 to my new iphone 5. I seem to have skipped the correct setup process and I'm not sure how to get back to the right place. Can anyone help?

Start over: On your iPhone 5, Settings>General>Reset>Erase All Content & Settings.

Similar Messages

  • The column on the far left that showed my iPhone setup and options is missing. How do I get it back.

    I Had to reinstall iTunes. Now the column on the far left that showed my iPhone, setups, options and the like is missing. How do I turn it back on?

    With the current version of iTunes the left-hand sidebar that you could get to show has been removed. Now when a device is connected you should get a device icon towards the top left of the iTunes screen next to the content type icons - click on that and you should get a list of categories down the left-hand side for the phone, one set selecting and syncing content from your computer's iTunes, and then a second set for showing what is currently on the phone.
    Does that device icon show ?

  • Schroot: Chroot setup failed: stage=setup-start

    $ schroot -p opera
    /usr/lib/schroot/schroot-mount: symbol lookup error: /usr/lib/schroot/schroot-mount: undefined symbol: _ZN5boost10filesystem6detail10status_apiERKSsRi
    E: Arch32-9a3a3cfd-bb6d-4e13-bdb6-4b7c237623f6: Chroot setup failed: stage=setup-start
    I followed the wiki, daemon is started. I just don't understand what this error means. Looks to me like it's trying to mount  UUID and can't.
    opera, firefox, etc work fine if I chroot /opt/arch32. Just schroot fails. Does anyone else have this working at the moment?

    I'm not using testing, but have this same error.
    Edit...
    I removed schroot
    pacman  -R schroot
    Deleted /etc/schroot
    Then building schroot with abs seems to have fixed the problem, although I'm not sure what the original problem was.
    also, If you're like me and often open programs using a different locale, you need to specify the locale befor the schroot command...
    LANG=zh_CN schroot -p firefox
    It's a little different than how dchroot works.
    Last edited by Leigh (2008-10-16 09:46:15)

  • Samba: Error: failed to setup guest info plus wrong workgroup

    I've managed to get Samba, running as PDC, into a broken state on 10.6.4.
    smb repeatedly crashes with the error "failed to setup guest info". I've done multiple searches on the web for this one but nothing stands out by way of an explanation or answer.
    nmb reports that it is the master browser for workgroup = Workgroup and yet the settings for the workgroup in Server Admin are for domain = HOME.
    serveradmin settings smb reports the correct workgroup name but it seems the running nmbd isn't getting the message.
    Anyone have any ideas or pointers on how to completely reset Samba?
    Message was edited by: herveyw

    I've managed to get Samba, running as PDC, into a broken state on 10.6.4.
    smb repeatedly crashes with the error "failed to setup guest info". I've done multiple searches on the web for this one but nothing stands out by way of an explanation or answer.
    nmb reports that it is the master browser for workgroup = Workgroup and yet the settings for the workgroup in Server Admin are for domain = HOME.
    serveradmin settings smb reports the correct workgroup name but it seems the running nmbd isn't getting the message.
    Anyone have any ideas or pointers on how to completely reset Samba?
    Message was edited by: herveyw

  • Itunes displays Iphone setup in German?!

    Trying to sync my new Iphone to Itunes to load an old back up on to it, however when I plug it in itunes displays the Iphone setup in German?! Both my Iphone and Itunes languages are set to english so don't know why! Please help!

    Problem solved...
    I think mine was in Russian or something. IDK but I couldn't read it. I called Apple and turns out all I had to do was reboot iTunes. I had tried unpugging the phone and that didn't work but if you X out of iTunes and reopen it should solve your problem =)

  • OPS에서 SYSTEM FAIL로 인한 SQL*NET FAIL-OVER 에 대처할 수 있는 SETUP

    제품 : SQL*NET
    작성날짜 : 1997-11-20
    OPS에서 SYSTEM FAIL로 인한 SQL*NET FAIL-OVER 에 대처할 수 있는 SETUP
    ==================================================================
    OPS에서 여러 node를 사용 중 한 시스템이 fail이 생길 경우 사용자의
    application 수정없이 fail-over 시스템으로 접속하는 방법입니다.
    제약 조건 > SQL*NET V2.3.2.1.6 for windows 95
    SQL*NET V2.3.2.1.8 for windows
    상기의 Version 이상 이라야 하며 위의 경우 tnsnames.ora 화일의
    configuration에 대한 setup 내용입니다.
    Example tnsnames.ora for SQL*Net 2.3 fail-over.
    When a user requests to connect to <alias>, sqlnet will attempt to
    connect to the address in the first description in the
    description_list, if that fails, it will try to connect to the address
    in the next description in the description_list.
    You can have as many descriptions in the description_list as needed.
    The client will only receive an error if all the descriptions fail.
    <alias>=
    (description_list=
    (description=
    (address_list=
    (address=
    (protocol=tcp)
    (host=<server 1>)
    (port=1521)
    (connect_data=
    (sid=<sid1>)
    (description=
    (address_list=
    (address=
    (protocol=tcp)
    (host=<server 2>)
    (port=1521)
    (connect_data=
    (sid=<sid2>)
    )

  • Failed to setup dm-crypt

    Hi, I've recently (within the last hour or so) updated my system and rebooted, only to find that my system cannot decrypt one of my partitions. cryptsetup comes back at me with:
    Failed to setup dm-crypt key mapping for device /dev/md3.
    Check that kernel supports serpent-xts-essiv:tgr192 cipher (check syslog for more info).
    Unfortunately there doesn't seem to be anything in the syslog. The kernel has loaded the serpent_generic, serpent_sse2_x86_64, xts, and tgr192 modules.
    Is it likely that I've missed something during the update? A missing kernel module or something changed in cryptsetup?
    Thanks

    https://wiki.archlinux.org/index.php/Re … Guidelines
    Not a Sysadmin issue, moving to NC...

  • CSM 4.1 - Flexconfig (Syntax errors detected - Failed to setup Velocity Engine to validate syntax)

    Hi,
    I am trying to build a simple flexconfig to remove some aaa statements. When I try to create any
    basic flexconfig, I get the following error msg:
    Syntax errors detected
    Failed to setup Velocity Engine to validate syntax
    Please correct errors.
    The flexconfig consisted of the following cmd:
    no aaa group server tacacs+ server123
    I also tried cloning an existing example "IOS_enable_SSL", rename and recieved the same error.
    What is the Velocity Engine and how can I verify that this component is working correctly?
    Regards
    Kevin

    Just discovered that I once saved this bug here: https://www.cisco.com/cisco/psn/bssprt/bss?searchType=bugIdSearch&bugId=CSCtz91443
    They write since around today that it's finally fixed. Maybe this actually also fixes our issue here. Sadly there isn't yet a version given in which it's fixed.

  • HT201269 When I backed up my old iPhone on iCloud, the backup does not show up on new iPhone setup screen. How do I fix this?

    When I backed up my old iPhone on iCloud, the backup does not show up on new iPhone setup screen. How do I fix this?

    if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

  • IPhone 3gs wont go past find my iphone setup after update to 5.0.1

    Hi, I have upgraded my iPhone 3gs to IOS 5.0.1. everything seemed to go ok and iTunes restored all my content but going through the setup afterwards (iCloud etc) it stops at 'find my iPhone' pressing next doesnt do anything. any ideas?

    Me again,
    Tried a hard reset on the phone and it worked - phone is working again although all the app layouts have moved
    happy bunny now :-D

  • HP Veer fails in setup trying to sign on APN error

    Hi all,
    Sorry for the extremely long post, it's kind of a complicated problem.
    Last week my wife sent her Veer through the wash, and not surprisingly it didn't survive 
    So we bought a new Veer from Amazon. When I ordered it, delivery time showed a delivery day of June 28th, but the estimated delivery date with the shipping notice was to be July 5 which was too long for her to go without a phone, which majorly ****ed me off. So I wanted to get a full size smartphone anyway so bought a new Focus S for myself intending to give her my Veer and then just sell the new one when it got in.
    Please note that we are using a prepay plan with no data plan, which turned out to be a HUGE deal when talking with the AT&T people.
    I did a WebOS doctor wipe on the Veer and tried to go through setup on it. It restarted and I went through the setup process.  It all worked fine up to the point where I needed to sign in to our profiles. I kept getting a sign in error, I even tried setting up a new sign on, nothing worked. Swapped sim cards, and tried both of our logons. I can't get past this sign on page so I am completely blocked at this point.
    After trying to sign in it times out  and we get to a screen "Sign in Failed" with an button for "Enter Phone Settings" with the following options already filled out.
    INTERNET APN - wap.cingular
    USERNAME - [email protected] 
    PASSWORD - Encrypted field but looking online found it was CINGULAR1
    Called up AT&T support, they couldn't figure it out and so thought the phone was bad and since my Veer was under warranty they are sending me a new one (charged me $15.00 to get it shipped by Monday!!) At this point I figured I had some how killed the phone during the reset process, but then the mailman came and delivered us the phone we ordered from Amazon, so tried that one, same darn problem with it, grrrr.... So next I called up At&T and tried to cancel the replacement phone and get my bucks back, but they couldn't cancel it. **bleep**!
    So called them back to explain the phone wasn't the problem and then I ended up with a "senior" support rep from AT&T, who to give the devil his due, tried to be helpful, we tried entering a bunch of different entries in the phone settings fields, nothing worked. After about two hours, she basically threw her hands up in the air and kept telling me this was an unsupported phone and that the 4g network wasn't supposed to work with the Veer and a bunch of other idiotic stuff. The same phone with the same sim had been working just fine up until the reset which she kept ignoring when she tried to tell me this, I kept calling BS on it.
    My next step was to visit an AT&T store and try to use one of their sims that had a data plan on it to see if it would work to get past the sign on screen. Luckily I caught them in a very dead time, there were 5 of them standing around twiddling their thumbs so they were thrilled to try and help me out. Tried a couple of different sims, messed around with the phone settings again, none of these worked. I also had them check my wifes sim to confirm it still had plenty of cash on it, it did.
    So the only thing I can think of is that the sign on server at HP\Palm is dead, but I can sign on and view my account online, phone shows up just like it should so not sure that is it either.
    Any ideas how to get past this? Any chance I can restore a backup when the phone is in this state?
    Believe me when I say any help or advice would be GREATLY appreciated!!
    Post relates to: HP TouchPad (WiFi)
    Post relates to: HP TouchPad (WiFi)

    Just fixed my veer issues.
    first, the apn should be WAP.cingular not wap.cingular, which is the (incorrect) preset apn.  make sure your WAP in capitalized.
    second, make sure you contact At&t and have them update the IMEI number associated with the sim card.  the number can be found by sliding up the veer and looking on the back, mirrored section.  it's small, but it's there.
    those 2 things solved my issues.  best of luck to you.

  • UCCX 9.0.2 AXL account continues to fail on setup

    I am spinning up a new CUCM 10 and UCCX 9.0.2 lab for our engineering department to begin work on testing features of our product against and during the initial setup I tell the system I am doing a "fresh install", the next step is to insert the service provider information. I put in the IP of my CUCM 10 cluster (on the same network) with the AXL Admin user name and the password. In every instance I get the error "Cisco Unified CM Authentication Failed because of the CCMAXL Exception. Please check the logs for details."
    I have enabled all services on this lab box, verified all my AXL usernames/passwords and reset multiple times and yet it still fails on me. I know this is the latest product from Cisco and experience may be light - but do any of you have any suggestions on what I can do to get this going?

    Hi,
    I see that you are using 9.0.2, but is it the base version (9.0.2.10000-71) or the SU1 (9.0.2.11001-24)?
    9.0.2 base is not compatbile with the CUCM 10 and 9.0.2 SU1 is compatible provided the following:
    3.Install ES03 or later version on Unified CCX 902SU1 to work with Unified Communications Manager 10.0(1).
    You can check this in the compatibility matrix:
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    Also, please note that we have had a lot of issues with 9.0.2 SU1 ES03 and we have deferred customers from using it. The fixes for the problems in ES3 and the fixes for which ES3 was released has been issued in ES4.
    So please upgrade to 9.0.2 SU1 ES04 in case you need it to get going with CUCM 10.0
    Hope this helps!
    Regards,
    Arundeep
    CCIE Voice #40132

  • Moving from one computer to another w/o messing up the iPhone setup

    i want to try and start syncing with a new computer i am about to get without having to wipe the iPhone
    is there anyway that i can move all the relevant files from my old desktop to a new one so that the iTunes playlists and the apps in folders stay as they are now?
    i know it is not just a matter of copying over the iTunes folder, because there must be files in folders like HD & ~/App Support or HD & ~/Pref, and quite possibly more
    but there may also be a problem that the computer number is associated with the syncing, and that it cannot be done
    either way, i want to give it a go, so does anyone know if there is a knowledge base on this, or even an app that would allow me to achieve this task?
    i am fully upto date with the software updates and iOS (with an iPhone 4)
    many thanks

    i know it is not just a matter of copying over the iTunes folder, because there must be files in folders like HD & ~/App Support or HD & ~/Pref, and quite possibly more
    Yes it is, and no there is not.
    I have done this twice in the last year - when switching from a PowerBook to my MacBook Pro, and after the hard drive failed on my MacBook Pro and was replaced under warranty.
    but there may also be a problem that the computer number is associated with the syncing, and that it cannot be done
    This is also incorrect. In regards to iTunes content, an iPhone can be synced with the iTunes library on a single computer only, and photos can be transferred from a single computer only. If you transfer the iTunes folder from your Music folder where all iTunes content is stored including 3rd party apps along with playlists, play count, etc. from one computer to another and you authorize the computer with your iTunes account with iTunes, you can sync your iPhone with the computer the iTunes folder was transferred to without losing any iTunes content on your iPhone and as if you aren't syncing with a different computer.
    The same applies with photos if you are using iPhoto. All you need to do is transfer the iPhoto Library from one Mac to another and nothing will have changed.

  • I uninstalled PS CS6 (non-cloud upgrade) WinXP SP3 then downloaded and reinstall failed during SetUp.exe

    Review: I purchased non-CC upgrade from PS CS5>CS6 today at Adobe.com, downloaded and installed, seemed to work, but had problems after attempting ACR update that led to PS errors, so I uninstalled PS CS6 via control panel>remove>Adobe uninstaller. When I tried to reuse SetUp.exe or re-extract PS CS6 install files; all failed. Contacted support chat they said-download again that will work. That failed, too. Please advise on how to re-install PS CS6 upgrade on same machine where I removed it just hours before. OS: Win XP SP3
    Thanks, Paul

    Kglad,
    Thanks for your helpful reply. I ran the cleaner, checked the log (ok), then ran installer. The installer ran (1 am) and after a brief celebration I looked and PS CS6 was not visible. It did not completely install and no PS CS6 icons were visible--I should have know something was wrong when it did not ask for serial number. I did System Restore, and just ran the CC Cleaner again (targeting PS CS6, since I believe that I need to leave the PS CS5 on the computer for the upgrade to work. Is there anything else that I may need to do to reinstall successfully? I think that the ACR I tried to install caused a problem -- can I target ACR for cleaning / removal further? I have valid serial numbers: loaded PS CS5 from box upgrade yesterday and then bought PS CS6 upgrade also yesterday. Thank you for your good ideas! Paul

  • Cannot Get Mail - The connection to the server failed. iPhone 3GS & Hotmail

    I've got an iPhone 3GS and I'm using Hotmail.
    I'm geting the same error message over and over - "Cannot Get Mail - The connection to the server failed.". Out of the blue it started on my phone, but then the email worked again for a day after, and then quit working again. I've tried deleting and adding it as a new account. I tried to go back to what might have in-part caused the problem, and the only thing I had done over the weekend was to turn iCloud on and start backing up to it, but the e-mail did work after that for a couple days. I've tried a couple different Hotmail accounts to see if it was a corrupt e-mail in one account, but both accounts give me the same "Cannot Get Mail" response. Creating the "TEMP" folder on Hotmail and moving e-mails there did not work.
    Could anyone spell out in layman's (non-IT) terms what I might be able to try?

    Who is the provider? Do you have two-step verification turned on? Did they change something on their end?

Maybe you are looking for