Failed Logon

when I try to logon on I get a "user profile service" failed the logon.
Any suggestion?

   You receive a "The User Profile Service failed the logon” error message
As CB says, always give us your model when you post here.
-Jerry

Similar Messages

  • Security Audit Log Failed Logon Reason Codes

    Hi all,
    Deos anyone know where i can get a list of the failed logon reason codes and types. For example:
    RFC/CPIC Logon Failed, Reason = 53, Type = S
    Thanks,,,

    Hi John,
    Check out note 320991
    53 = Password lock active (too many failed logons)
    S = RFC system call (SRFC)

  • Logging failed logon attempts

    Is there any way to capture failed logon attempts in UCS? I see allowed logon attempts in the audit log but can't see a way to track failed ones.
    Thanks,
    Simon

    Hi Holger,
    I suggest you use the Performance logs to monitor the number of logins and logouts for a server in the cluster. You can then log these stats to your PC as a csv file. However, you will need to keep the RTMT open while the logging is going on. Here's a doc I wrote a few days ago regarding this. May this would help?
    https://supportforums.cisco.com/blog/12173616/setting-alerts-and-monitoring-parameters-such-active-calls-cluster
    The counters for Extension Mobility are located @ Performance -> ServerName -> Cisco Extension Mobility

  • Tracking failed logons in 9i(R2)/10G

    What is the best way to track failed logons in 9i? I have been reading through the doc's on tahiti for 9i, but so far have only seen fine grained auditing of tables etc. when all I want to do is record the failed logins, which machine, os user etc.
    I am assuming that once I find the proper method in 9i, I can apply the same process in 10G, even though 10G may have more of this capability already built in.
    thanks.

    Thanks - I am assuming I have to enable auditing somehow in the init/spfile and bounce the DB to have this take effect?
    eg. audit_trail=db (or os?)
    Then have the statement you suggested somehow auto-run at database startup?
    I have initiated logon and logoff triggers and have a monthly report from the data they create to keep the SOX bean-counters happy, but now they want a report to show all failed logons as well, so I am trying to find the best way to do this that will be easy to pull a report from.
    Edited by: user571263 on Nov 25, 2008 2:08 PM

  • Auditing for Successful and Failed Logon.

    I have a requirement wherein I want to Audit when the user Logs In and if the user unsuccessfully tries to log in. I am using the oracle's Audit functionality to audit it.
    Also I am using the oracle's audit functionality only for the above two items and have implemented the Auditing of other tables using triggers. I am not using the Oracle's Audit functionality for other purposes because the fine grained auditing is not available for the standard edition of Oracle 9i.
    I want to know what is the best way to merge the Audit details from the Oracle table with the Audit Details of the Audit table which I have implemented.
    Thanks
    Ajay.

    We have a After Logon trigger in oracle but there is no trigger which will fire if the user tries to login but fails to log in. This is the reason I am using the oracle's Audit functionality for successful and unsuccessful login.
    I want to know what is the best way to merge the Audit data of oracle with my Audit Data. The Audit table which I have created is somewhat similar to the Oracle's Audit table. Oracle jobs will do it but there will be performance issue since the job should fire frequently if the user wants to see the report immediately.
    Thanks
    Ajay.

  • User Profile Service failed logon

    I have a HP G62-347CL Notebook with Windows 7. After I turn the computer on I have to choose one of three user accounts. Myself, my husbands or my sons. After I click onto my icon with my name (my account being the only one with administrative status) it promps me for my password. After doing so a message comes onto the screen saying "The User Profile Service service failed the logon. User profile cannot be loaded'. WHAT DOES THAT MEAN? I typed in the correct password because when I've typed in the wrong password it says that i have entered the incorrrect password. Please check my spelling and try again,

    This is a known problem in Windows and there is a microsoft support document which addresses this isuse. Refer below link for more info
    http://support.microsoft.com/kb/947215
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • ASA - log successful and failed logons to syslog server?

    Hello,
    How can I log successful and failed SSH and ADSM logons to our syslog server?
    Thanks

    Hi,
    I haven't really touched the default logging configurations much but some firewalls that I manage have "logging trap informational" which sends messages of users connecting to the firewall.
    The messages shows which username was used and if it was rejected or accepted. These messages all seem to be of the "informational" / "level 6" syslog messages.
    The syslog IDs for them are:
    ASA-6-113008
    ASA-6-113012
    ASA-6-113015
    Though these messages only show information about the AAA not which type of connection was used (I tried both SSH and ASDM to see)
    I'm sure there are more messages that will show additional information about the connection and also what the logged user did on the firewall during the management connection.
    - Jouni

  • Recording failed logon attempts

    Hi all,
    I have built a custom logon form for a internal forms9i system we use and I was wondering if there is a way to enhance the form so that it can track/record unsuccessful logon attempts?
    Cheers,
    Leigh.

    Also look athe Forms Builder help documentation. It shows that you can do this:
    logon('username','password@database', FALSE);
    IF FORM_FAILURE = true THEN
    -- logon was unsuccessful, record unsuccessful logon attempt
    ELSE
    -- logon was successful
    END;

  • Failed logon attempts tracking without AUDIT_TRAIL

    Hello All,
    I would like to know if any other way than AUDIT_TRAIL=db and AUDIT CONNECT WHENEVER NOT SUCCESSFUL;
    any thing like enabling listener tracing or so ? i need to track source from where some one is trying to logon in system.
    Thanks and Regards,
    Ajay

    ABHIVSANKAR wrote:
    Hello John,
    It is my interest to know is it possible that enabling listener trace can help?
    I am not sure about the implication setting AUDIT_TRAIL=DB. Will it genrate very huge data or trace files ?
    Regards,
    Ajay
    Audting won't generate anywhere near the volume of data that a listener trace will.  If in doubt, what will it cost you to turn on listener trace for a few hours and see what you get?  How do you think people who are 'experts' got to be considered as such? 

  • Auditing Failed Logons

    Hello all,
    I am running Oracle 8i on Windows. We are switching to Oracle 9i on Unix. What I would like to know is, with Oracle 8i on Windows, how do I force the auditing of locked out Users? Currently in my Audit table, I have successfull and unsuccessful logon. Is there anyway to create a trigger on the SYS.AUD$ to email someone that an user account has been locked? Thank you inadvance for your help.

    Hi Jeffrey,
    The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
    Enabling file auditing is a 2-step process.
    [1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
    for "Audit object access."
    [2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
    - auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
    A similar thread:
    http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • Track business objects failed logon attempt ip address

    Hi
    Someone tried to use my enterprise user name and login into BO prod cmc since I belong to administrators group.
    My account was disabled as a result of the above after 3 unsuccessful attempts.
    I'd like to find out the IP address of PC from which this was tried. I was looking at audit reports. One report does provide "IP address of comps accessing my cluster" but this will not help in my scenario.
    Can someone pls help?
    Thanks

    Hi Ravi,
    Files, DLLs, executables, etc corruption is the most probable suspection in this issue scenario.
    Best would be to uninstall BO again, removing registry entries and then re-install again with the default DB as suggested by Arvind and then later it could be point to SQL Server.
    Please share your further views/thoughts.
    Regards,
    Arun

  • Error Message when logging on "The Group Policy Client service failed the logon. Access is denied"

    Since the move to Windows 7 we have started getting this error above when people login at random times and on random machines, at first we thought it was only a select few users, but now it seems to have occurred to about 20 different Staff members working
    at the school. Also of those 20 odd users it has happened to them on a few occasions.
    What we know
    We know this problem is only occurring to staff with Roaming Profiles, it seems like somehow the profile is not Synchronizing with the Servers File Share that houses the profiles, which causes the NTUSER.DAT file to become corrupt and go from being around
    2 – 3 MBs to 256KB (In all cases where a user has had this issue there NTUSER.DAT file has been 256KB)
    Current Resolution to the problem
    When a staff member contact us with this problem, we fortunately have Previous Versions working on the profiles folder on the server, so we are able to restore their NTUSER.DAT file from 1 to 2 days before it became corrupt, which then seems to allow them
    to log on fine
    What we have tried so far & suggested so far
    After some research on Google, we found the following thread on EduGeek
    http://www.edugeek.net/forums/windows-7/78733-windows-7-user-profile-failed-error-again.html#post700415
    Which suggested that the problem may lay within registry, so we implemented the Script that was posted on the website, however this has not seemed to make any difference
    In the early stages when only 5 – 10 staff seemed to be having the problem, we believed the issue could be with just certain AD accounts. It had not seemed to happen to any recently created AD accounts so we thought it could be a corrupt attribute on
    the user so we delete one of the staff AD accounts that had the problem and creating a brand new one, however within about 2 – 3 weeks that staff member had the issue occur again
    Leading on from point two, we also thought the problem could be with people using multiple computers, logging on in 2 places and not logging off properly, but unfortunately the staff member referred to in point 2 only uses the one computer in reception.
    Another potential cause that we figured might be the route of the problem, was it could be specific computers that are not communicating properly with the server, which could be causing this problem to occur, but we have no real way of testing this,
    as the staff generally log onto 3 – 4 different computers throughout the day and in different location
    We log a call with EE and they just pointed us to various websites that we had already checked and wasn’t much help.
    In Summary
    This error has now occurred with about 20 members of staff, we currently only use Windows 7 at our Senior School & Moving to Windows 7 at our Prep School in the Summer
    holidays, we would like to find out the route of this problem ideally before then, as we could potentially be doubling the amount of staff with the problem after the move. Has anyone else seen this problem or have a brain wave on how to solve it?
    Regards
    Andy

    Hi Dudleya,
    First of all ,I would suggest to check the permissions of the NTUSER.DAT registry hive .Here is a link for reference :
    The Group Policy Client service failed the logon. Access is denied(Juke Chou`s answer)
    https://social.technet.microsoft.com/Forums/windows/en-US/8c0054a3-35be-4fc4-839c-e2176613eb23/the-group-policy-client-service-failed-the-logon-access-is-denied?forum=w7itpronetworking
    Please refer to this link and add the registry keys to have a check .Please backup the registry keys before you made modifications to them.
    The Group Policy Client Service Failed The Logon In Windows 8(It should also work on windows 7 )
    http://www.thewindowsclub.com/fix-group-policy-client-service-failed-logon-windows-8
    If the issue persists ,we can refer to this link to troubleshoot this issue .
    Troubleshoot User Profiles with Events(It should also be applied to windows 7 )
    https://technet.microsoft.com/en-us/library/jj649075.aspx
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Best regards

  • User profile service service failed the logon?

    Every time I try to logon to my user account in windows vista home premium, it says :The User Profile Service service Has failed the logon. The User Profile Cannot Be Loaded." The Rest of the accounts on my computer still work fine. But New User Accounts say the same thing. System restore didn't even fix it when i restored back as far as possible. I've scanned for viruses with all security programs that I have, along with system diagnostics, etc. and still nothing. it still did it even after I moved all my  files to another user's folder and deleted my account. I didn't change anything or add or delete anything before it stopped working. When i go to " user profiles" in "System properties" it showed my profile was a backup and unknown profile size. after I deleted my account, it didn't show my profile at all.

    Posts 1
    Windows Vista Home Premium failed logon
    Hi, I have a Dell Inspiron 1720, about 4 weeks old, O S Windows Visa home premium.
    On switching on, my profile picture appears and requests the pass word, on entering the password the following message appears "The user profile service failed logon.User profile cannot be loaded"
    I have searched forums for assistance, but some say to press F8 on boot up I only have an F2 or F12 option on my Inspiron. also I only have one profile on the laptop as some are suggesting log on via guest profile and change settings, but i am unable to do this as i have no guest profile set up. Please help! 

  • "logon failed" error when connecting to XML data source

    I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
    Logon failed.
    Details: Cannot open file
    Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
    However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
    I have tried a local HTTP source as well as the same source running on Amazon EC2.
    Any ideas?

    Thanks for the help.
    I am new to crystal reports, so I do not understand your suggestion. Both of those points look like they are related to Adobe Flash.
    I am trying to create a report using the standard report creation wizard:
    1) new, standard report
    2) create  new connection
    3) xml and web services
    4) xml data source
    When using the sample from the SAP site, it works fine:
    http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
    When connecting to my source from a browser, it works fine. When using my source as a local document instead of over http it works fine. It is only when connecting to my source over http that I get the failed logon error.
    Kelly

  • USER PROFILE SERVICES: Service failed to Logon

    THE SOLUTION!!  It is so simple!  Microsoft or Windows "Restore Point".  Just go there and restore your system to any date when your system was working right.  In my case, an automatic update for Shockwave Flash Player caused my problem.  I just went to the Restore Point and set the restore point for prior to the update and everything was A-okay again.  You don't have to try any of all that terrible advice that is being given for solving this problem.  System Restore:  a simple, trustworthy and quick fix by Windows itself!
    Hope this helps all those people out there having this same problem as I did.  Which is how I figured it out.  After reviewing, out of disbelief, all the bad advice being given; I came up with the solution from my own brain power.  It is so simple, but since we never had System Restore Point in the versions prior to XP, I rarely think of it. 
    I hope this helps a lot of people!
    Signed:  Vee

    snowcat45.1
    0
    I had this problem happen to me just after installing Win 7 and was messing around with the text settings on desktop.I had changed text sizeand icon size, when I was switching back ;the puter restarted and I discovered I was locked out with message " The User Profile Service seervice failed logon - user profile not found". I contacted  Dell support and they were of no help but suggested to reload my puter!! I using f8 key got in through safe mode and did a system restore and the problem fixed

Maybe you are looking for

  • Safari not honoring text encoding settings

    I'm trying to track down a problem I'm having with Safari Version 2.0.3 (417.9.2) and text encoding. Unfortunately I believe it had something to do with SafariStand, and I somehow can't fully remove it. I have removed SafariStand, SIMBL, and trashed

  • Understanding the correct use of FromOrderComponets and ToOrderComponents

    Hi all Someone could help me understand the difference, and in what case I must use fromOrderComponets and in what case i must use toOrderComponents. In the Decomposition Rules. I've done multiple orchestrations to own cartridges, by multiple product

  • Specifying Client Auth Cert in Anyconnect NAM

    Hi guys, Currently i have set up an SSID which uses EAP-FAST to perform user certificate authentication against an Identity store in ISE connected to AD. On the client devices I have install the Anyconnect NAM to act as the dot1x supplicant and have

  • Movie won't play now - searching for movie data in file "Rolling Credits"??

    I have a movie I made with iMovie (I have v3 or so). I know for a fact it used to play (it's saved as an MPG-2) on my laptop (10.3.9). All of a sudden, when I try to play it, it says "searching for movie data in file "Bounce Across 01"", or "Rolling

  • Beginners errors with HelloWorldApp

    Would much appreciate any help. Getting the following errors which I can't get to grips with. Written a basic beginners java text-the HelloWorldApp.java, saved in c:\Java. In there is also bin\javac.exe. When I type java\javac HelloWorldApp.java, get