Failed N73 backup and restore

Since N73 keep on freezing on me while someone tries to call me or suddenly restart while I'm composing an SMS message . I tried to have my phone updated with the new firmware using my WinXP sp2 and this is what happend...
I backup my N73 phone and memory content using PC Suite 6.84 and it was good
I updated my N73 phone software from v2.06x to v4.07x using PC Suite 6.84 and it was good
Now I restored my N73 phone and memory content using PC Suite 6.84 and it failed.
The phone keeps on prompting me the memory is already full. I tried restoring the Settings only and same error that I get . even if I select "Settings" only while restoring my phone . it keeps on copying those mp3 . which i don't think those mp3 are part of the setting
most nokia phones now are **bleep** . unlike before . i wish i didn't buy this . Now I can't properly restore my phone content . what a phoneMessage Edited by lewell on 20-Oct-200703:26 PM

phonehacker, N82 is perhaps the first N series phone to have the UDP (User Data Protection) enabled. So, a firmware update via NSU will not erase the contents of the phone memory. Not to mention that FOTA will also not erase the contents of phone memory as it simply downloads only the new portions of the firmware instead of the entire firmware binary, contrary to the NSU method.
UDP is not implemented in older phones such as N73. Therefore, a backup IS mandatory in order to preserve the data stored in phone memory. The backup before update is indeed useful regardless of whether UDP is enabled or not.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Similar Messages

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

2013 Backup and Restore

When I go to my backup and Restore and check the job status it tells me there is a backup in progress:
A backup or restore is currently in progress
How do I reset this as there is no backup that I have run for some time?

Hi,
According to your post, my understanding is that the job status still shown “A
backup or restore is currently in progress”.
Did you delete a old search application and recreate a new one before?
If so, maybe the old object is still existing in SQL, you can used the following stsadm command:
Stsadm -o deleteconfigurationobject -id “object GUID”
To find the object GUID, simply go into Central Admin - Manage Service Applications and highlight the offending legacy service application (Search Service
Application in the case). You should now be able to see the GUID in the IE address bar. Run the command above, and try your backups again and all should be well.
For more information:
http://imperfectit.blogspot.com/2010/06/sharepoint-2010-farm-backup-fails.html
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/0310b061-ea1c-4576-bb74-a02f5e04a3a0/backup-job-stuck-in-process-in-backup-and-restore-job-status?forum=sharepointadminprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!

My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!

Are you saying that you contacted Apple support and they instructed you to backup and restore your iPad? Or do you mean that you picked up this information from an online support article? If you spoke to an Apple rep or received these instructions via email, contact them again for further help.
I fail to see how restoring your iPad would enable yoyr Apple ID.

Attempting to use "backup and Restore" giver error message

In November 2014 I backed up my PC ( see below ) onto a 2TB ecternal drive ( Lacie). This ok and can restore. Spare space 1.2TB
Now when I attempt to Backup again, using Windows Backup and restore, with same settings I get an error message :
"The requested operation cannot be performed on a file with a user-mapped section open" This appears after some time of activity. There is no mention of WHICH file causes the problem. I have repeated with different settings ie with
part backups only, or just one drive only.
The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
I would very much appreciate some advice.

Hi and thank you Mandy.
After many failed attempts - even backing up a few files to test - I was getting nowwhere. Eventually I succeeded after disabling start menus and uninstalling some programs. I also disabled my Kaspersky anti-virus completely and disconnected
the internet!! This time the backup and system image appeared to be OK .
You have helped, Mandy, by identifying the anti-virus as a possible culprit!! Thank you. Next time I backup I will just
temporally disable it and see what happens.
Kind regards
Malcolm

Backup and Restore VM

I have a host server that has a C: drive and a D: drive. Right now I only have one VM running and it is located on the D: drive. I need to reformat the disk that the D: drive is on. For some reason it was created as a MBR type disk and I
need to delete it and recreate it as a GPT disk so that I can extend the D: partition beyond 2TB. So, what is the best way to backup and restore the existing VM in this case?

I'm not really sure what you are referring to as an import/export but I'm going to assume its something along the lines of copying the data to 1 drive, then copying the data back to another drive. Doing a file based backup and recovery would do the same
thing. I don't particularly like doing stuff like copy and pastes to move data (especially important data) bc there is no guarantee copy and paste actually copied everything (no logging of what it actually did) and there are alot of things that can happen
during the copy (disk latency, network latency) that may cause data to be lost (delayed write failures). With any good backup program you should be able to run a report for what files it actually backed up and what files failed to backup and the reason
they failed to back up. Same applies to restores. Also I have seen issues where a simple copy and paste strips certain special attributes from the file.
If file based backup/restore is not an option, then maybe a robocopy of the data would be the best solution. I'm pretty sure using /b /copyall api should get everything as well. And you can add a /v switch to it to get some logging.

Backup and Restore My Sites

Hi,
I was hoping for a bit of clarity regarding this topic.
As I understand it, there are two sides of MySites, the Site Collections that are created through self-service site creation for users content, and then service application that provisions the site profiles.
For site profiles, I believe that the Farm Backup and Restore procedure in Central Administration takes care of this, and a backup and restore can be done by selecting the service application in the long list of tick boxes available in the Farm Backup options.
Please correct me if I'm wrong.
For the Site Collections, as far as I can tell, you can either back them up individually using the SharePoint native backup tool (not feasible for thousands of site collections), backup the content db using SQL backup, or Powershell. As far as I can tell,
this has the limitation of only allowing you to backup and restore ALL sites collections at once, not individual site collections. Is this correct?
If so, is there a way of backing up the site collections so that an individual site collection can be restored should it be required, without having to painstakingly backup all the site collections individually? I didn't know if there was a script for this
or failing that a 3rd party tool.
Any thoughts and input would be much appreciated.

Re: SQL backups, yes. When you attach the content database it attaches all the site collections in the database.
There is no out of the box method to restore individual site collections unless you perform individual site collection backups. You can automate this with PowerShell.
Something like this would work:
$mysites = Get-SPSite -Webapplication "My Sites"
$Path = "\\path\to\place\backups\"
foreach ($site in $mysite) {
$filename = $($site.ServerRelativeUrl -replace "/", "_") + ".bak"
Backup-SPSite -Identity $site -Path $($Path + $filename)
This creates a site collection backup of every site collection in the My Sites Webapplication (you could customize this as necessary for your environment). Note that it replaces forward slashes ("/") in the site collection URL with underscores
("_") as you can't have the slashes in a filename.
This is a quick and dirty script as well. You'd probably want to add outputs or set the site locks, or whatever.
Alternatively, most third-party SharePoint backup solutions offer more granulated restore options -- with a single backup you can restore everything that an OOB backup would contain, plus you can get lower within the content -- so site collections, sites,
lists, libraries, items, documents.
Jason Warren
Infrastructure Architect
Habanero Consulting Group
habaneroconsulting.com/blog

HT201250 Does Time Machine backup and restore Bootcamp?

I am replacing defective hard drive in an iMac that I primarily use as a pc under Bootcamp. I have to find some way to clone and restore the bootcamp partition. I was told today by a Genius at the Apple store that I should buy a 2 TB external (which I did for $150) and run Time Machine. He assured me that my bootcamp partition would be backed up along with the entire mac partition and that I would be able to restore everything perfectly on the new hd. Now that I am home and continuing my research, I can't find anywhere that says it will work. Documentation on Time Machine fails to mention bootcamp. So, does Time Machine backup and restore bootcamp or not? And will it be bootable after the restore? Help!

I think you've got it! I have never used WinClone so I cannot attest to how well it will work, but it's pretty much all lthere is. You will have to create a new Boot Camp partition on the new drive, and it should be the same size as the partition you cloned.
Be sure you prep the new hard drive:
Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU upon completion and return to the installer. Now install Snow Leopard or restore from your Time Machine backup.

Rman backup and restore noarchive log

Hi,
We are changing our backup tools from exp to rman. For this I am trying to do
restoration in test server of oracle db running on 9.2 noarchive log.
Step 1. Taken complete backup with rman with nocatalog and include controlfile
nput datafile fno=00008 name=D:\ORACLE\ORADATA\TOTO\TOOLS01.DBF
channel ORA_DISK_1: starting piece 1 at 09-MAR-06
channel ORA_DISK_1: finished piece 1 at 09-MAR-06
piece handle=D:\DBBACKUPS\T1.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:15
Finished backup at 09-MAR-06
Step 2. Deleted database files and control files from database directory.
Step 3. Restore controlfiles
RMAN> restore controlfile from 'd:\dbbackups\t1.bkp';
Starting restore at 09-MAR-06
using channel ORA_DISK_1
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
replicating controlfile
input filename=D:\ORACLE\ORADATA\TOTO\CONTROL01.CTL
output filename=D:\ORACLE\ORADATA\TOTO\CONTROL02.CTL
output filename=D:\ORACLE\ORADATA\TOTO\CONTROL03.CTL
Finished restore at 09-MAR-06
Step 3. after database mount, try to restore datafiles, which is failed
restoring datafile 00024 to D:\ORACLE\ORADATA\TOTO\DIN36\TESTUNV1.ORA
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 03/09/2006 17:24:25
ORA-19505: failed to identify file "D:\DBBACKUPS\TOTOBKP.RMAN"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Why it is looking old backup totobkp.rman which is not existing on disk ? My
backup name is t1.bkp.
Will you pl tell me where I have gone wrong ? Secondly what are the correct
steps to be followed for taking cold backup and restoration.
thanks & regards
pjp

Okay let us ponder this for a moment:-
DB NOARCHIVELOG
It does not matter when you take the backup of controlfile because the database is in mount state and no changes are allowed to the db ( Checkpoints etc. )
DB ARCHIVELOG
It does not matter when you take the backup of controlfile because the database is continuously writing to the archivelog's.
End result should not be significantly different as to worry about whether to take backup of control file before or after backup.
Thanks
Gopal

Backup and restore Mac

Hard drive is failing and so I will need to backup and restore Mac onto new drive. My Mac is a Macbook 2009 and I use Time Machine weekly for backups. So when my new drive comes what will I do? What I imagine I will do is the following.
1. Take out old drive and install new one.
2. Boot from OSX SL Boot CD and format hard drive.
3. Restore Mac from time machine backup from Boot CD? Or would I need to install SL first?
4. Mavericks, Mountain Lion and such were installed from the Apple Store and have no CD so this may complicate things.
5. Regarding Windows XP Partiton I have no idea but I may need to install XP and Office again and if so I have the CD's. Or is there an easier way?
Thank you for your help.
John

If you can put the new drive in an external USB or FireWire case, and use SuperDuper! (Free for a full clone) or Carbon Copy Cloner) it would make your life much easer when you swap the drive.
As for Windows partition, you would need a Windows cloning utility.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

HT1766 Now, I understand how the backup and restore the backup functions. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already the

Now, I understand how the backup and restore the backup features function. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already there? I really do not want any music on my iPhone because I have an iPod for that. Thanks. Hope someone can help.

When you connect your phone and start iTunes on the left side you will see your phone listed under devices.Click on te icon next to it that looks like a battery. Click on the music button at the top and uncheck the sync music box.

Windows 8 full system backup and restore to new laptop (system with 32GB mSata Cache)?

Hi, I have a new Envy DV7-7205 which has 2TB storage with 32GB HDD Cache (or mSata, not really sure how it's implemented). I need to return the laptop as it's faulty but I would like to startup on the replacement exactly where I left off.
Are there any special methods required to backup and restore the system image from the old laptop to the new one, particularly with consideration to the 32GB SSD cache, as this doesn;t seem to appear as a distinct "drive" on the system.
Please can anybody advise the simplest, safest method to move my entire system from old to the new laptops (should be exactly the same spec machine).
Many thanks,
Greg
HP Envy DV7-7205tx, 2x1TB HDD, 32GB mSata Cache, Windows 8 Pro

Hi,
Firstly I don't know how this is going to work on new machine because the Windows 8 lisence would NOT work at all.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I backup and restore my itunes media using a hard drive?

Can I backup and restore files if I used a hard drive?
I do not want to backup my entire itunes library of >200 GB to individual CDs and DVDs, if I can help it; it will take forever. Hence the above question.
Thanks!

The answer to your question is yes, though anyone who posts to this group would not be asking that question. I think you might be looking for the iTunes discussions group?
RealDave

Failed N73 backup and restore

Similar Messages

Maybe you are looking for