Failed nvidia 7600 in touchsmart iq790

hi everyone, im new to this forum but not to the problem going by what ive been reading on the forum.
i turned on my pc to be welcomed with green chequered lines and startup repair recomended (dont work) then black
screen. i had a repair guy look at it and he said graphics card gone down and if i can locate one he can fit it.
problem is finding anywhere that sells this card  nvidia geforce 7600 laptop type any ideas of where i can obtain one
would be a great help
thanks

This is a nvidia geforce known issue. However HP refuse to grant my 2nd failure after warranty. So I am now out to find a replacement graphic card. I am not sure if this machine take a ATI version of MXM II graphic card. Anyone has ideal or tried it before?

Similar Messages

  • HP TouchSmart IQ790 Stopped Working

    Hi i have a HP Touchsmart IQ790 which has stopped working .. has green power light on back and i can hear the fan & HDD .. no boot up display as screen is blank.. DVD drive is responsive as i tried using a boot disk to start.. also used an external monitor to get a display but nothing.. i assume  a component on Mother board has failed as no POST is displayed. Systems is only 15 Months old..

    Has this been resolved now, as mine is doing the same, albeit, intermittently.
    I have tried to to do the above but doesn't resolve the issue.
    I have tried to press ESC and after a couple of tries, it gets me to the blue screen where ESC, F10 and F11 are options to press, then this boots up normally.
    And sometimes it takes a few tries to even get this far.
    I read somewhere that the Nvidia GeForce graphics card is the culprit but surely not in my case if it boots up intermittently?

  • Taking apart touchsmart iq790

    hello all,
    does anyone know where i can find instuctions on how to take apart my touchsmart iq790. i want to dismantle it an replace the tv tuner card.
    thank you for any help.

    thank ou for your reply,
    i know it looks a beast to dismantle
    i have tried also, it's become a bit of a project now, i want to strip it down. just need to know what order to remove everything

  • Cant install any driver for Hp NVidia gt230 on Touchsmart 600-1055

    Last few years I bought a HP Touchsmart oversea when I travelled to US then I brought it back to Australia. First couple months it was fine then one day I turned on the PC then It is just black screen after the window 7 boot screen then restart after few seconds. It keeps repeating that process unless I go to Safe mode and remove its NVidia driver and replace with window standard driver ( Video Controller VGA compatible) then I can boot up the window normally but cant use any program that require the delicated graphic card. I have tried hard to find its driver from every resources that I can find on the internet including Hp website and NVidia webiste but still again no luck. for 3 years I still cant find the driver for this that can make it working. What happened? is it my graphic card physically fault or because the software isusse? I forgot to mention that I even try to use the DVDs that I orders from HP USA and try to factory recovery but it is still having the same issue. I try to install many different version of window in cluding win 7 32&64 bits, Window 8 pro 64 bits then STILL NO LUCK. So could anyone please tell me what happened and how to fix it cause as I am aware that HP australia not support for HP USA product and I dont want to see my expensive desktop become a brick. 
    Thanks

    Hello Trung_Hau_Le,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues where you cannot use the higher end graphics card installed in your HP TouchSmart 600-1055 Desktop PC. The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
    US support link to contact options for HP products purchased in the US.
    Outside of US support link to contact options for HP products purchased outside the US.
    Now just because you purchased the computer in Australia does not mean your warranty is not good in the US. I am providing you with a link to theHP Global Warranty and FAQs, which states the following:
    HP Global Warranty covers HP products at the level of standard warranty offered in the country in which it is used. For example, a product purchased in country "A" and moved to country "B" receives the current warranty coverage provided by country "B" (if that product is marketed or supported in country B)
    This means that your computer  receives the same treatment in the US as a computer sold in the US. I would recommend you contact HP Technical Support to have your issue addressed.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Problem with BSOD/Freezing probably related to Nvidia driver on Touchsmart IQ810

    I have an HP Touchsmart IQ810, now a little elderly but otherwise going strong.
    For the last couple of years now I've had a problem with occasional/frequent BSODs, one or two a week. Using crash  dump analyser WhoCrashed this is almost certainly related to the driver for onboard Nvidia 9600GM video chip. The usual advice is to make sure you have the latest driver, but I've tried more recent drivers and they seem to make the problem worse - rather than BSODs, I get screen freezes at least once a day, so I've gone back to the old driver version.
    I've run the hardware diagnostic tools and found no problems, I've even tried using MSI Afterburner to turn down the clock speed of the card to prevent overheating, but this makes no difference. BSODs/freezes sometimes occur not long after booting, so surely it can't be overheating.
    I've pretty much had to put up with this but I would like it fixed. Any suggestions?

    NVIDIA and RADEON Drivers, depending oin what they are doing can really point you in the right spot. If you are still having issues after fully removing and reinstalling the drivers then you are looking towards a Hardware issue. I would check the contact points on your motherboard and other hardware, this is looking more like an issue with your motherboard.
    The biggest problems for example when it comes to computers with RADEON cards, because they are big like the NIVIDA cards; just moving your computer or bumping it can cause damage to your componets within your computer and cause issue like this. RADEONS cards are known to have screen tearing and different colored lines through the screen, another thing I would check is to make sure the swtich or voltage on you video card isn't flipped. If the switch is flipped the wrong way, if you end up forcing your card to hard with the little voltage it has running through it your computer WILL BSOD and MSI Afterburner won't even matter, usually voltage is a setting that you don't want to mess with when it comes to using that program, that is why they make switches on these cards.
    If it was a driver issue, your machine won't not be BSOD. The reason why I say that is because BSOD happens to help you prevent further damage to your hardware and if the correct settings are not how they should be, something as simple as skype can cause your machine to do thing's it shouldn't. I've had many issues myself that I've gone through, being in the IT field as well I've seen this to be a common issue due to changing configurations or changing what you do on your computer.
    You may of not changed anything but just a simple virus can cause programs to do what they are not meant to do.
    Boot into safemode and see if you run into this issue still after running it for a few hours, with safemode as you know. You boot with the processes that you need to run the core functions of your computer. If nothing happens it is because your computer has taken a chill pill. If everything is good and you boot into your main OS then you start having this issue again then you know it IS hardware and setting's related. Little thing's like this will make a hug difference.
    The switch also is verd had to find but it will be very small and colored white, if you still have the box you video card came in they should have it pointed out where it is.
    I hope this helps, if you have any questions please ask.

  • Suspend resume fail - nvidia 8600gt

    When resuming,
    shows kernel message like '...soft reset failed...' short time.
    screen goes black.
    power button works.
    I've tried with,
    linux, nouveau
    linux, nvidia
    linux-lts, nvidia-lts
    Any advice will be appreciated.
    Thanks.
    $ sudo lspci -vvv -s 01:00.0
    01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Samsung Electronics Co Ltd Device 806b
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 41
    Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at f0000000 (64-bit, non-prefetchable) [size=32M]
    Region 5: I/O ports at 9000 [size=128]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee0300c Data: 41b1
    Capabilities: [78] Express (v1) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <512ns, L1 <4us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    Capabilities: [128 v1] Power Budgeting <?>
    Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    $ inxi -v 1
    System: Host: ych Kernel: 3.14.16-1-lts x86_64 (64 bit) Desktop: i3 4.8
    Distro: Arch Linux
    CPU: Dual core AMD Athlon 64 X2 6000+ (-MCP-) clocked at 1000 MHz
    Graphics: Card: NVIDIA G84 [GeForce 8600 GT]
    Display Server: X.Org 1.16.0 driver: nvidia
    Resolution: [email protected]
    GLX Renderer: GeForce 8600 GT/PCIe/SSE2
    GLX Version: 3.3.0 NVIDIA 340.32
    Drives: HDD Total Size: 500.1GB (43.5% used)
    Info: Processes: 94 Uptime: 2:08 Memory: 794.6/3956.6MB
    Client: Shell (fish) inxi: 2.1.29
    $ pacman -Q linux linux-lts nvidia nvidia-lts
    linux 3.16-2
    linux-lts 3.14.16-1
    nvidia 340.32-1
    nvidia-lts 340.32-1
    $ journalctl -b db690544e0ef4017a2e9f3afe69f0a23
    -- Logs begin at Tue 2014-07-29 00:50:20 KST, end at Fri 2014-08-15 13:04:16 KST. --
    Aug 14 21:55:30 ych systemd-journal[127]: Runtime journal is using 8.0M (max allowed 197.8M, trying to leave 296.7M free of 1.9G available → current limit 197.8M).
    Aug 14 21:55:30 ych systemd-journal[127]: Runtime journal is using 8.0M (max allowed 197.8M, trying to leave 296.7M free of 1.9G available → current limit 197.8M).
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys cpuset
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys cpu
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys cpuacct
    Aug 14 21:55:30 ych kernel: Linux version 3.14.16-1-lts (nobody@var-lib-archbuild-extra-x86_64-barthalion) (gcc version 4.9.1 (GCC) ) #1 SMP Fri Aug 8 06:23:48 UTC 2014
    Aug 14 21:55:30 ych kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4ccffff2-b9d7-4f91-951c-086012178dfb rw quiet resume=/dev/disk/by-uuid/88ac4005-a90a-4f54-9cde-72060b2c1da4
    Aug 14 21:55:30 ych kernel: e820: BIOS-provided physical RAM map:
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe88fff] ACPI data
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000cfe89000-0x00000000cfe8afff] ACPI NVS
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000cfe8b000-0x00000000cfffffff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    Aug 14 21:55:30 ych kernel: BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    Aug 14 21:55:30 ych kernel: NX (Execute Disable) protection: active
    Aug 14 21:55:30 ych kernel: SMBIOS 2.4 present.
    Aug 14 21:55:30 ych kernel: DMI: SAMSUNG ELECTRONICS CO.,LTD Samsung DeskTop System/Samsung DeskTop System, BIOS 03QA.0145.20080131.KKH 01/31/2008
    Aug 14 21:55:30 ych kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Aug 14 21:55:30 ych kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Aug 14 21:55:30 ych kernel: No AGP bridge found
    Aug 14 21:55:30 ych kernel: e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    Aug 14 21:55:30 ych kernel: MTRR default type: uncachable
    Aug 14 21:55:30 ych kernel: MTRR fixed ranges enabled:
    Aug 14 21:55:30 ych kernel: 00000-9FFFF write-back
    Aug 14 21:55:30 ych kernel: A0000-BFFFF uncachable
    Aug 14 21:55:30 ych kernel: C0000-CFFFF write-protect
    Aug 14 21:55:30 ych kernel: D0000-DEFFF uncachable
    Aug 14 21:55:30 ych kernel: DF000-DFFFF write-back
    Aug 14 21:55:30 ych kernel: E0000-E3FFF uncachable
    Aug 14 21:55:30 ych kernel: E4000-FFFFF write-protect
    Aug 14 21:55:30 ych kernel: MTRR variable ranges enabled:
    Aug 14 21:55:30 ych kernel: 0 base 0000000000 mask FF80000000 write-back
    Aug 14 21:55:30 ych kernel: 1 base 0080000000 mask FFC0000000 write-back
    Aug 14 21:55:30 ych kernel: 2 base 00C0000000 mask FFF0000000 write-back
    Aug 14 21:55:30 ych kernel: 3 disabled
    Aug 14 21:55:30 ych kernel: 4 disabled
    Aug 14 21:55:30 ych kernel: 5 disabled
    Aug 14 21:55:30 ych kernel: 6 disabled
    Aug 14 21:55:30 ych kernel: 7 disabled
    Aug 14 21:55:30 ych kernel: TOM2: 0000000130000000 aka 4864M
    Aug 14 21:55:30 ych kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Aug 14 21:55:30 ych kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    Aug 14 21:55:30 ych kernel: e820: last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
    Aug 14 21:55:30 ych kernel: found SMP MP-table at [mem 0x000f7560-0x000f756f] mapped at [ffff8800000f7560]
    Aug 14 21:55:30 ych kernel: Scanning 1 areas for low memory corruption
    Aug 14 21:55:30 ych kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
    Aug 14 21:55:30 ych kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Aug 14 21:55:30 ych kernel: [mem 0x00000000-0x000fffff] page 4k
    Aug 14 21:55:30 ych kernel: BRK [0x01b3c000, 0x01b3cfff] PGTABLE
    Aug 14 21:55:30 ych kernel: BRK [0x01b3d000, 0x01b3dfff] PGTABLE
    Aug 14 21:55:30 ych kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
    Aug 14 21:55:30 ych kernel: init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
    Aug 14 21:55:30 ych kernel: [mem 0x12fe00000-0x12fffffff] page 2M
    Aug 14 21:55:30 ych kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    Aug 14 21:55:30 ych kernel: init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
    Aug 14 21:55:30 ych kernel: [mem 0x12c000000-0x12fdfffff] page 2M
    Aug 14 21:55:30 ych kernel: init_memory_mapping: [mem 0x100000000-0x12bffffff]
    Aug 14 21:55:30 ych kernel: [mem 0x100000000-0x12bffffff] page 2M
    Aug 14 21:55:30 ych kernel: init_memory_mapping: [mem 0x00100000-0xcfe7ffff]
    Aug 14 21:55:30 ych kernel: [mem 0x00100000-0x001fffff] page 4k
    Aug 14 21:55:30 ych kernel: [mem 0x00200000-0xcfdfffff] page 2M
    Aug 14 21:55:30 ych kernel: [mem 0xcfe00000-0xcfe7ffff] page 4k
    Aug 14 21:55:30 ych kernel: RAMDISK: [mem 0x379ba000-0x37cd4fff]
    Aug 14 21:55:30 ych kernel: ACPI: RSDP 00000000000f7530 000024 (v02 PTLTD )
    Aug 14 21:55:30 ych kernel: ACPI: XSDT 00000000cfe82670 00005C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
    Aug 14 21:55:30 ych kernel: ACPI: FACP 00000000cfe88924 0000F4 (v03 SEC MAGIC 06040000 ATI 000F4240)
    Aug 14 21:55:30 ych kernel: ACPI: DSDT 00000000cfe826cc 006258 (v01 ATI SB600 06040000 MSFT 03000000)
    Aug 14 21:55:30 ych kernel: ACPI: FACS 00000000cfe8afc0 000040
    Aug 14 21:55:30 ych kernel: ACPI: SSDT 00000000cfe88a8c 00030E (v01 AMD POWERNOW 06040000 AMD 00000001)
    Aug 14 21:55:30 ych kernel: ACPI: APIC 00000000cfe88d9a 000054 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    Aug 14 21:55:30 ych kernel: ACPI: MCFG 00000000cfe88dee 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    Aug 14 21:55:30 ych kernel: ACPI: HPET 00000000cfe88e2a 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    Aug 14 21:55:30 ych kernel: ACPI: BOOT 00000000cfe88e62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    Aug 14 21:55:30 ych kernel: ACPI: SLIC 00000000cfe88e8a 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
    Aug 14 21:55:30 ych kernel: ACPI: Local APIC address 0xfee00000
    Aug 14 21:55:30 ych kernel: Scanning NUMA topology in Northbridge 24
    Aug 14 21:55:30 ych kernel: No NUMA configuration found
    Aug 14 21:55:30 ych kernel: Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    Aug 14 21:55:30 ych kernel: Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    Aug 14 21:55:30 ych kernel: NODE_DATA [mem 0x12fff7000-0x12fffbfff]
    Aug 14 21:55:30 ych kernel: [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    Aug 14 21:55:30 ych kernel: Zone ranges:
    Aug 14 21:55:30 ych kernel: DMA [mem 0x00001000-0x00ffffff]
    Aug 14 21:55:30 ych kernel: DMA32 [mem 0x01000000-0xffffffff]
    Aug 14 21:55:30 ych kernel: Normal [mem 0x100000000-0x12fffffff]
    Aug 14 21:55:30 ych kernel: Movable zone start for each node
    Aug 14 21:55:30 ych kernel: Early memory node ranges
    Aug 14 21:55:30 ych kernel: node 0: [mem 0x00001000-0x0009cfff]
    Aug 14 21:55:30 ych kernel: node 0: [mem 0x00100000-0xcfe7ffff]
    Aug 14 21:55:30 ych kernel: node 0: [mem 0x100000000-0x12fffffff]
    Aug 14 21:55:30 ych kernel: On node 0 totalpages: 1048092
    Aug 14 21:55:30 ych kernel: DMA zone: 64 pages used for memmap
    Aug 14 21:55:30 ych kernel: DMA zone: 21 pages reserved
    Aug 14 21:55:30 ych kernel: DMA zone: 3996 pages, LIFO batch:0
    Aug 14 21:55:30 ych kernel: DMA32 zone: 13242 pages used for memmap
    Aug 14 21:55:30 ych kernel: DMA32 zone: 847488 pages, LIFO batch:31
    Aug 14 21:55:30 ych kernel: Normal zone: 3072 pages used for memmap
    Aug 14 21:55:30 ych kernel: Normal zone: 196608 pages, LIFO batch:31
    Aug 14 21:55:30 ych kernel: Detected use of extended apic ids on hypertransport bus
    Aug 14 21:55:30 ych kernel: ACPI: PM-Timer IO Port: 0x8008
    Aug 14 21:55:30 ych kernel: ACPI: Local APIC address 0xfee00000
    Aug 14 21:55:30 ych kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Aug 14 21:55:30 ych kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Aug 14 21:55:30 ych kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Aug 14 21:55:30 ych kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Aug 14 21:55:30 ych kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Aug 14 21:55:30 ych kernel: IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    Aug 14 21:55:30 ych kernel: ACPI: IRQ9 used by override.
    Aug 14 21:55:30 ych kernel: Using ACPI (MADT) for SMP configuration information
    Aug 14 21:55:30 ych kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    Aug 14 21:55:30 ych kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    Aug 14 21:55:30 ych kernel: nr_irqs_gsi: 40
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xcfe80000-0xcfe88fff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xcfe89000-0xcfe8afff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xcfe8b000-0xcfffffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
    Aug 14 21:55:30 ych kernel: e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
    Aug 14 21:55:30 ych kernel: Booting paravirtualized kernel on bare hardware
    Aug 14 21:55:30 ych kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    Aug 14 21:55:30 ych kernel: PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86656 r8192 d23936 u1048576
    Aug 14 21:55:30 ych kernel: pcpu-alloc: s86656 r8192 d23936 u1048576 alloc=1*2097152
    Aug 14 21:55:30 ych kernel: pcpu-alloc: [0] 0 1
    Aug 14 21:55:30 ych kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031693
    Aug 14 21:55:30 ych kernel: Policy zone: Normal
    Aug 14 21:55:30 ych kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4ccffff2-b9d7-4f91-951c-086012178dfb rw quiet resume=/dev/disk/by-uuid/88ac4005-a90a-4f54-9cde-72060b2c1da4
    Aug 14 21:55:30 ych kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Aug 14 21:55:30 ych kernel: Checking aperture...
    Aug 14 21:55:30 ych kernel: No AGP bridge found
    Aug 14 21:55:30 ych kernel: Node 0: aperture @ c4000000 size 32 MB
    Aug 14 21:55:30 ych kernel: Aperture pointing to e820 RAM. Ignoring.
    Aug 14 21:55:30 ych kernel: Your BIOS doesn't leave a aperture memory hole
    Aug 14 21:55:30 ych kernel: Please enable the IOMMU option in the BIOS setup
    Aug 14 21:55:30 ych kernel: This costs you 64 MB of RAM
    Aug 14 21:55:30 ych kernel: Mapping aperture over 65536 KB of RAM @ c4000000
    Aug 14 21:55:30 ych kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
    Aug 14 21:55:30 ych kernel: Memory: 3979936K/4192368K available (5176K kernel code, 856K rwdata, 1632K rodata, 1128K init, 1292K bss, 212432K reserved)
    Aug 14 21:55:30 ych kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Aug 14 21:55:30 ych kernel: Hierarchical RCU implementation.
    Aug 14 21:55:30 ych kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    Aug 14 21:55:30 ych kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    Aug 14 21:55:30 ych kernel: NR_IRQS:8448 nr_irqs:512 16
    Aug 14 21:55:30 ych kernel: spurious 8259A interrupt: IRQ7.
    Aug 14 21:55:30 ych kernel: Console: colour dummy device 80x25
    Aug 14 21:55:30 ych kernel: console [tty0] enabled
    Aug 14 21:55:30 ych kernel: allocated 16777216 bytes of page_cgroup
    Aug 14 21:55:30 ych kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Aug 14 21:55:30 ych kernel: hpet clockevent registered
    Aug 14 21:55:30 ych kernel: tsc: Fast TSC calibration using PIT
    Aug 14 21:55:30 ych kernel: tsc: Detected 2992.560 MHz processor
    Aug 14 21:55:30 ych kernel: tsc: Marking TSC unstable due to TSCs unsynchronized
    Aug 14 21:55:30 ych kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.12 BogoMIPS (lpj=29925600)
    Aug 14 21:55:30 ych kernel: pid_max: default: 32768 minimum: 301
    Aug 14 21:55:30 ych kernel: ACPI: Core revision 20131218
    Aug 14 21:55:30 ych kernel: ACPI: All ACPI Tables successfully acquired
    Aug 14 21:55:30 ych kernel: Security Framework initialized
    Aug 14 21:55:30 ych kernel: Yama: becoming mindful.
    Aug 14 21:55:30 ych kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Aug 14 21:55:30 ych kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Aug 14 21:55:30 ych kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Aug 14 21:55:30 ych kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys memory
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys devices
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys freezer
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys net_cls
    Aug 14 21:55:30 ych kernel: Initializing cgroup subsys blkio
    Aug 14 21:55:30 ych kernel: tseg: 00cff00000
    Aug 14 21:55:30 ych kernel: CPU: Physical Processor ID: 0
    Aug 14 21:55:30 ych kernel: CPU: Processor Core ID: 0
    Aug 14 21:55:30 ych kernel: mce: CPU supports 5 MCE banks
    Aug 14 21:55:30 ych kernel: LVT offset 0 assigned for vector 0xf9
    Aug 14 21:55:30 ych kernel: process: using AMD E400 aware idle routine
    Aug 14 21:55:30 ych kernel: Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
    tlb_flushall_shift: 6
    Aug 14 21:55:30 ych kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
    Aug 14 21:55:30 ych kernel: ftrace: allocating 20051 entries in 79 pages
    Aug 14 21:55:30 ych kernel: ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    Aug 14 21:55:30 ych kernel: ..MP-BIOS bug: 8254 timer not connected to IO-APIC
    Aug 14 21:55:30 ych kernel: ...trying to set up timer (IRQ0) through the 8259A ...
    Aug 14 21:55:30 ych kernel: ..... (found apic 0 pin 0) ...
    Aug 14 21:55:30 ych kernel: ....... works.
    Aug 14 21:55:30 ych kernel: smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (fam: 0f, model: 43, stepping: 03)
    Aug 14 21:55:30 ych kernel: APIC calibration not consistent with PM-Timer: 49ms instead of 100ms
    Aug 14 21:55:30 ych kernel: APIC delta adjusted to PM-Timer: 1246871 (623429)
    Aug 14 21:55:30 ych kernel: Performance Events: AMD PMU driver.
    Aug 14 21:55:30 ych kernel: ... version: 0
    Aug 14 21:55:30 ych kernel: ... bit width: 48
    Aug 14 21:55:30 ych kernel: ... generic registers: 4
    Aug 14 21:55:30 ych kernel: ... value mask: 0000ffffffffffff
    Aug 14 21:55:30 ych kernel: ... max period: 00007fffffffffff
    Aug 14 21:55:30 ych kernel: ... fixed-purpose events: 0
    Aug 14 21:55:30 ych kernel: ... event mask: 000000000000000f
    Aug 14 21:55:30 ych kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Aug 14 21:55:30 ych kernel: x86: Booting SMP configuration:
    Aug 14 21:55:30 ych kernel: .... node #0, CPUs: #1
    Aug 14 21:55:30 ych kernel: x86: Booted up 1 node, 2 CPUs
    Aug 14 21:55:30 ych kernel: smpboot: Total of 2 processors activated (11970.16 BogoMIPS)
    Aug 14 21:55:30 ych kernel: devtmpfs: initialized
    Aug 14 21:55:30 ych kernel: PM: Registering ACPI NVS region [mem 0xcfe89000-0xcfe8afff] (8192 bytes)
    Aug 14 21:55:30 ych kernel: pinctrl core: initialized pinctrl subsystem
    Aug 14 21:55:30 ych kernel: RTC time: 21:55:25, date: 08/14/14
    Aug 14 21:55:30 ych kernel: NET: Registered protocol family 16
    Aug 14 21:55:30 ych kernel: cpuidle: using governor ladder
    Aug 14 21:55:30 ych kernel: cpuidle: using governor menu
    Aug 14 21:55:30 ych kernel: node 0 link 0: io port [1000, fffff]
    Aug 14 21:55:30 ych kernel: TOM: 00000000d0000000 aka 3328M
    Aug 14 21:55:30 ych kernel: node 0 link 0: mmio [f3100000, ffffffff]
    Aug 14 21:55:30 ych kernel: node 0 link 0: mmio [f3000000, f30fffff]
    Aug 14 21:55:30 ych kernel: node 0 link 0: mmio [a0000, bffff]
    Aug 14 21:55:30 ych kernel: node 0 link 0: mmio [f0000000, f2ffffff]
    Aug 14 21:55:30 ych kernel: node 0 link 0: mmio [e0000000, efffffff]
    Aug 14 21:55:30 ych kernel: node 0 link 0: mmio [d0000000, dfffffff]
    Aug 14 21:55:30 ych kernel: TOM2: 0000000130000000 aka 4864M
    Aug 14 21:55:30 ych kernel: bus: [bus 00-ff] on node 0 link 0
    Aug 14 21:55:30 ych kernel: bus: 00 [io 0x0000-0xffff]
    Aug 14 21:55:30 ych kernel: bus: 00 [mem 0xd0000000-0xffffffff]
    Aug 14 21:55:30 ych kernel: bus: 00 [mem 0x000a0000-0x000bffff]
    Aug 14 21:55:30 ych kernel: bus: 00 [mem 0x130000000-0xfcffffffff]
    Aug 14 21:55:30 ych kernel: ACPI: bus type PCI registered
    Aug 14 21:55:30 ych kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Aug 14 21:55:30 ych kernel: PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xe0000000-0xe03fffff] (base 0xe0000000)
    Aug 14 21:55:30 ych kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe03fffff] reserved in E820
    Aug 14 21:55:30 ych kernel: PCI: Using configuration type 1 for base access
    Aug 14 21:55:30 ych kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Aug 14 21:55:30 ych kernel: mtrr: probably your BIOS does not setup all CPUs.
    Aug 14 21:55:30 ych kernel: mtrr: corrected configuration.
    Aug 14 21:55:30 ych kernel: bio: create slab <bio-0> at 0
    Aug 14 21:55:30 ych kernel: ACPI: Added _OSI(Module Device)
    Aug 14 21:55:30 ych kernel: ACPI: Added _OSI(Processor Device)
    Aug 14 21:55:30 ych kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Aug 14 21:55:30 ych kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Aug 14 21:55:30 ych kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Aug 14 21:55:30 ych kernel: ACPI: Interpreter enabled
    Aug 14 21:55:30 ych kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    Aug 14 21:55:30 ych kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Aug 14 21:55:30 ych kernel: ACPI: (supports S0 S3 S4 S5)
    Aug 14 21:55:30 ych kernel: ACPI: Using IOAPIC for interrupt routing
    Aug 14 21:55:30 ych kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Aug 14 21:55:30 ych kernel: ACPI: No dock devices found.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    Aug 14 21:55:30 ych kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-03] only partially covers this bridge
    Aug 14 21:55:30 ych kernel: PCI host bridge to bus 0000:00
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: reg 0x10: [io 0x8440-0x8447]
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: reg 0x14: [io 0x8434-0x8437]
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: reg 0x18: [io 0x8438-0x843f]
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: reg 0x1c: [io 0x8430-0x8433]
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: reg 0x20: [io 0x8400-0x840f]
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: reg 0x24: [mem 0xf3309000-0xf33093ff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:12.0: set SATA to AHCI mode
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.0: reg 0x10: [mem 0xf3304000-0xf3304fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.1: reg 0x10: [mem 0xf3305000-0xf3305fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.1: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.2: reg 0x10: [mem 0xf3306000-0xf3306fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.3: reg 0x10: [mem 0xf3307000-0xf3307fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.3: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.4: reg 0x10: [mem 0xf3308000-0xf3308fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.4: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.5: reg 0x10: [mem 0xf3309400-0xf33094ff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.5: supports D1 D2
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    Aug 14 21:55:30 ych kernel: pci 0000:00:13.5: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.0: reg 0x10: [io 0x8410-0x841f]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.1: reg 0x20: [io 0x8420-0x842f]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.2: reg 0x10: [mem 0xf3300000-0xf3303fff 64bit]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: System wakeup disabled by ACPI
    Aug 14 21:55:30 ych kernel: pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    Aug 14 21:55:30 ych kernel: pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    Aug 14 21:55:30 ych kernel: pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    Aug 14 21:55:30 ych kernel: pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: [10de:0402] type 00 class 0x030000
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit]
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: reg 0x24: [io 0x9000-0x907f]
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf2ffffff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: [10ec:8167] type 00 class 0x020000
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: reg 0x10: [io 0xa400-0xa4ff]
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: reg 0x14: [mem 0xf3000000-0xf30000ff]
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: supports D1 D2
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: PME# supported from D1 D2 D3hot D3cold
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0xf3000000-0xf30fffff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
    Aug 14 21:55:30 ych kernel: ACPI: Enabled 1 GPEs in block 00 to 1F
    Aug 14 21:55:30 ych kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Aug 14 21:55:30 ych kernel: vgaarb: loaded
    Aug 14 21:55:30 ych kernel: vgaarb: bridge control possible 0000:01:00.0
    Aug 14 21:55:30 ych kernel: PCI: Using ACPI for IRQ routing
    Aug 14 21:55:30 ych kernel: PCI: pci_cache_line_size set to 64 bytes
    Aug 14 21:55:30 ych kernel: e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
    Aug 14 21:55:30 ych kernel: e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
    Aug 14 21:55:30 ych kernel: NetLabel: Initializing
    Aug 14 21:55:30 ych kernel: NetLabel: domain hash size = 128
    Aug 14 21:55:30 ych kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Aug 14 21:55:30 ych kernel: NetLabel: unlabeled traffic allowed by default
    Aug 14 21:55:30 ych kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    Aug 14 21:55:30 ych kernel: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    Aug 14 21:55:30 ych kernel: Switched to clocksource hpet
    Aug 14 21:55:30 ych kernel: pnp: PnP ACPI init
    Aug 14 21:55:30 ych kernel: ACPI: bus type PNP registered
    Aug 14 21:55:30 ych kernel: system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    Aug 14 21:55:30 ych kernel: system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:01: [dma 4]
    Aug 14 21:55:30 ych kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x1080] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0220-0x022f] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x040b] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x04d6] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0480-0x0487] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0c00-0x0c01] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0c14] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0c50-0x0c52] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0c6c] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0c6f] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0cd0-0x0cd1] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0cd2-0x0cd3] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0cd4-0x0cd5] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0cd6-0x0cd7] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0cd8-0x0cdf] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x8000-0x805f] could not be reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x8100-0x81ff window] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x8200-0x82ff window] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x0f40-0x0f47] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: [io 0x087f] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    Aug 14 21:55:30 ych kernel: system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
    Aug 14 21:55:30 ych kernel: system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
    Aug 14 21:55:30 ych kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
    Aug 14 21:55:30 ych kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    Aug 14 21:55:30 ych kernel: pnp: PnP ACPI: found 10 devices
    Aug 14 21:55:30 ych kernel: ACPI: bus type PNP unregistered
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: BAR 15: assigned [mem 0xf3100000-0xf31fffff pref]
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf2ffffff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Aug 14 21:55:30 ych kernel: pci 0000:02:04.0: BAR 6: assigned [mem 0xf3100000-0xf311ffff pref]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: PCI bridge to [bus 02-04]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0xf3000000-0xf30fffff]
    Aug 14 21:55:30 ych kernel: pci 0000:00:14.4: bridge window [mem 0xf3100000-0xf31fffff pref]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e1fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 13 [mem 0x000e2000-0x000e3fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 14 [mem 0xd0000000-0xdfffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 15 [mem 0xf0000000-0xffffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 16 [io 0x0000-0x0cf7]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:00: resource 17 [io 0x0d00-0xffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf30fffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 2 [mem 0xf3100000-0xf31fffff pref]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 5 [mem 0x000d0000-0x000d1fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 6 [mem 0x000d2000-0x000d3fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 7 [mem 0x000d4000-0x000d5fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 8 [mem 0x000d6000-0x000d7fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000d9fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 10 [mem 0x000da000-0x000dbfff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 11 [mem 0x000dc000-0x000ddfff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 12 [mem 0x000e0000-0x000e1fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 13 [mem 0x000e2000-0x000e3fff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 14 [mem 0xd0000000-0xdfffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 15 [mem 0xf0000000-0xffffffff]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 16 [io 0x0000-0x0cf7]
    Aug 14 21:55:30 ych kernel: pci_bus 0000:02: resource 17 [io 0x0d00-0xffff]
    Aug 14 21:55:30 ych kernel: NET: Registered protocol family 2
    Aug 14 21:55:30 ych kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    Aug 14 21:55:30 ych kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    Aug 14 21:55:30 ych kernel: TCP: Hash tables configured (established 32768 bind 32768)
    Aug 14 21:55:30 ych kernel: TCP: reno registered
    Aug 14 21:55:30 ych kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Aug 14 21:55:30 ych kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Aug 14 21:55:30 ych kernel: NET: Registered protocol family 1
    Aug 14 21:55:30 ych kernel: pci 0000:01:00.0: Boot video device
    Aug 14 21:55:30 ych kernel: PCI: CLS 32 bytes, default 64
    Aug 14 21:55:30 ych kernel: Unpacking initramfs...
    Aug 14 21:55:30 ych kernel: Freeing initrd memory: 3180K (ffff8800379ba000 - ffff880037cd5000)
    Aug 14 21:55:30 ych kernel: PCI-DMA: Disabling AGP.
    Aug 14 21:55:30 ych kernel: PCI-DMA: aperture base @ c4000000 size 65536 KB
    Aug 14 21:55:30 ych kernel: PCI-DMA: using GART IOMMU.
    Aug 14 21:55:30 ych kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Aug 14 21:55:30 ych kernel: Simple Boot Flag at 0x38 set to 0x1
    Aug 14 21:55:30 ych kernel: Scanning for low memory corruption every 60 seconds
    Aug 14 21:55:30 ych kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
    Aug 14 21:55:30 ych kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Aug 14 21:55:30 ych kernel: zbud: loaded
    Aug 14 21:55:30 ych kernel: VFS: Disk quotas dquot_6.5.2
    Aug 14 21:55:30 ych kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Aug 14 21:55:30 ych kernel: msgmni has been set to 7908
    Aug 14 21:55:30 ych kernel: Key type big_key registered
    Aug 14 21:55:30 ych kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Aug 14 21:55:30 ych kernel: io scheduler noop registered
    Aug 14 21:55:30 ych kernel: io scheduler deadline registered (default)
    Aug 14 21:55:30 ych kernel: io scheduler cfq registered
    Aug 14 21:55:30 ych kernel: pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    Aug 14 21:55:30 ych kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Aug 14 21:55:30 ych kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Aug 14 21:55:30 ych kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
    Aug 14 21:55:30 ych kernel: vesafb: scrolling: redraw
    Aug 14 21:55:30 ych kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Aug 14 21:55:30 ych kernel: vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90000b80000, using 1216k, total 1216k
    Aug 14 21:55:30 ych kernel: Console: switching to colour frame buffer device 80x30
    Aug 14 21:55:30 ych kernel: fb0: VESA VGA frame buffer device
    Aug 14 21:55:30 ych kernel: GHES: HEST is not enabled!
    Aug 14 21:55:30 ych kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Aug 14 21:55:30 ych kernel: Linux agpgart interface v0.103
    Aug 14 21:55:30 ych kernel: rtc_cmos 00:03: RTC can wake from S4
    Aug 14 21:55:30 ych kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    Aug 14 21:55:30 ych kernel: rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
    Aug 14 21:55:30 ych kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Aug 14 21:55:30 ych kernel: TCP: cubic registered
    Aug 14 21:55:30 ych kernel: NET: Registered protocol family 10
    Aug 14 21:55:30 ych kernel: NET: Registered protocol family 17
    Aug 14 21:55:30 ych kernel: registered taskstats version 1
    Aug 14 21:55:30 ych kernel: Magic number: 10:184:955
    Aug 14 21:55:30 ych kernel: memory memory8: hash matches
    Aug 14 21:55:30 ych kernel: rtc_cmos 00:03: setting system clock to 2014-08-14 21:55:25 UTC (1408053325)
    Aug 14 21:55:30 ych kernel: PM: Checking hibernation image partition /dev/disk/by-uuid/88ac4005-a90a-4f54-9cde-72060b2c1da4
    Aug 14 21:55:30 ych kernel: PM: Hibernation image not present or could not be loaded.
    Aug 14 21:55:30 ych kernel: Freeing unused kernel memory: 1128K (ffffffff818d8000 - ffffffff819f2000)
    Aug 14 21:55:30 ych kernel: Write protecting the kernel read-only data: 8192k
    Aug 14 21:55:30 ych kernel: Freeing unused kernel memory: 956K (ffff880001511000 - ffff880001600000)
    Aug 14 21:55:30 ych kernel: Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
    Aug 14 21:55:30 ych kernel: random: systemd-tmpfile urandom read with 1 bits of entropy available
    Aug 14 21:55:30 ych systemd-udevd[46]: starting version 215
    Aug 14 21:55:30 ych kernel: i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    Aug 14 21:55:30 ych kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Aug 14 21:55:30 ych kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Aug 14 21:55:30 ych kernel: SCSI subsystem initialized
    Aug 14 21:55:30 ych kernel: libata version 3.00 loaded.
    Aug 14 21:55:30 ych kernel: ahci 0000:00:12.0: version 3.0
    Aug 14 21:55:30 ych kernel: ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    Aug 14 21:55:30 ych kernel: ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    Aug 14 21:55:30 ych kernel: ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
    Aug 14 21:55:30 ych kernel: ACPI: bus type USB registered
    Aug 14 21:55:30 ych kernel: usbcore: registered new interface driver usbfs
    Aug 14 21:55:30 ych kernel: usbcore: registered new interface driver hub
    Aug 14 21:55:30 ych kernel: usbcore: registered new device driver usb
    Aug 14 21:55:30 ych kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Aug 14 21:55:30 ych kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Aug 14 21:55:30 ych kernel: ohci-pci: OHCI PCI platform driver
    Aug 14 21:55:30 ych kernel: ehci-pci: EHCI PCI platform driver
    Aug 14 21:55:30 ych kernel: scsi0 : ahci
    Aug 14 21:55:30 ych kernel: scsi1 : ahci
    Aug 14 21:55:30 ych kernel: scsi2 : ahci
    Aug 14 21:55:30 ych kernel: scsi3 : ahci
    Aug 14 21:55:30 ych kernel: ata1: SATA max UDMA/133 abar m1024@0xf3309000 port 0xf3309100 irq 22
    Aug 14 21:55:30 ych kernel: ata2: SATA max UDMA/133 abar m1024@0xf3309000 port 0xf3309180 irq 22
    Aug 14 21:55:30 ych kernel: ata3: SATA max UDMA/133 abar m1024@0xf3309000 port 0xf3309200 irq 22
    Aug 14 21:55:30 ych kernel: ata4: SATA max UDMA/133 abar m1024@0xf3309000 port 0xf3309280 irq 22
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.0: irq 16, io mem 0xf3304000
    Aug 14 21:55:30 ych kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Aug 14 21:55:30 ych kernel: hub 1-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 1-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.1: OHCI PCI host controller
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.1: irq 17, io mem 0xf3305000
    Aug 14 21:55:30 ych kernel: hub 2-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 2-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.2: OHCI PCI host controller
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.2: irq 18, io mem 0xf3306000
    Aug 14 21:55:30 ych kernel: hub 3-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 3-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.3: OHCI PCI host controller
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.3: irq 17, io mem 0xf3307000
    Aug 14 21:55:30 ych kernel: hub 4-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 4-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.4: OHCI PCI host controller
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
    Aug 14 21:55:30 ych kernel: ohci-pci 0000:00:13.4: irq 18, io mem 0xf3308000
    Aug 14 21:55:30 ych kernel: hub 5-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 5-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: ata2: SATA link down (SStatus 0 SControl 300)
    Aug 14 21:55:30 ych kernel: ata4: SATA link down (SStatus 0 SControl 300)
    Aug 14 21:55:30 ych kernel: ata3: SATA link down (SStatus 0 SControl 300)
    Aug 14 21:55:30 ych kernel: ata1: softreset failed (device not ready)
    Aug 14 21:55:30 ych kernel: ata1: applying PMP SRST workaround and retrying
    Aug 14 21:55:30 ych kernel: ehci-pci 0000:00:13.5: EHCI Host Controller
    Aug 14 21:55:30 ych kernel: ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
    Aug 14 21:55:30 ych kernel: ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    Aug 14 21:55:30 ych kernel: ehci-pci 0000:00:13.5: debug port 1
    Aug 14 21:55:30 ych kernel: ehci-pci 0000:00:13.5: irq 19, io mem 0xf3309400
    Aug 14 21:55:30 ych kernel: ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
    Aug 14 21:55:30 ych kernel: hub 6-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 6-0:1.0: 10 ports detected
    Aug 14 21:55:30 ych kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Aug 14 21:55:30 ych kernel: ata1.00: ATA-8: SAMSUNG HD502HJ, 1AJ10002, max UDMA/133
    Aug 14 21:55:30 ych kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Aug 14 21:55:30 ych kernel: ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
    Aug 14 21:55:30 ych kernel: ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
    Aug 14 21:55:30 ych kernel: ata1.00: configured for UDMA/133
    Aug 14 21:55:30 ych kernel: scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
    Aug 14 21:55:30 ych kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Aug 14 21:55:30 ych kernel: sd 0:0:0:0: [sda] Write Protect is off
    Aug 14 21:55:30 ych kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Aug 14 21:55:30 ych kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Aug 14 21:55:30 ych kernel: hub 1-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 1-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    Aug 14 21:55:30 ych kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Aug 14 21:55:30 ych kernel: hub 2-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 2-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: hub 3-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 3-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: hub 4-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 4-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: hub 5-0:1.0: USB hub found
    Aug 14 21:55:30 ych kernel: hub 5-0:1.0: 2 ports detected
    Aug 14 21:55:30 ych kernel: scsi4 : pata_atiixp
    Aug 14 21:55:30 ych kernel: scsi5 : pata_atiixp
    Aug 14 21:55:30 ych kernel: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
    Aug 14 21:55:30 ych kernel: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
    Aug 14 21:55:30 ych kernel: ata5.00: ATAPI: TSSTcorpCD/DVDW TS-H652M, SC01, max UDMA/33
    Aug 14 21:55:30 ych kernel: ata5.00: configured for UDMA/33
    Aug 14 21:55:30 ych kernel: scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652M SC01 PQ: 0 ANSI: 5
    Aug 14 21:55:30 ych kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Aug 14 21:55:30 ych kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Aug 14 21:55:30 ych kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
    Aug 14 21:55:30 ych kernel: floppy0: no floppy controllers found
    Aug 14 21:55:30 ych kernel: PM: Starting manual resume from disk
    Aug 14 21:55:30 ych kernel: PM: Hibernation image partition 8:7 present
    Aug 14 21:55:30 ych kernel: PM: Looking for hibernation image.
    Aug 14 21:55:30 ych kernel: PM: Image not found (code -22)
    Aug 14 21:55:30 ych kernel: PM: Hibernation image not present or could not be loaded.
    Aug 14 21:55:30 ych kernel: EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Aug 14 21:55:30 ych systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
    Aug 14 21:55:30 ych kernel: EXT4-fs (sda5): re-mounted. Opts: data=ordered
    Aug 14 21:55:30 ych systemd-journal[127]: Journal started
    Aug 14 21:55:30 ych systemd-udevd[147]: starting version 215
    Aug 14 21:55:31 ych kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    Aug 14 21:55:31 ych kernel: ACPI: Power Button [PWRB]
    Aug 14 21:55:31 ych kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    Aug 14 21:55:31 ych kernel: ACPI: Power Button [PWRF]
    Aug 14 21:55:31 ych kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Aug 14 21:55:31 ych kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
    Aug 14 21:55:31 ych kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8050
    Aug 14 21:55:31 ych kernel: [drm] Initialized drm 1.1.0 20060810
    Aug 14 21:55:31 ych kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    Aug 14 21:55:31 ych kernel: sp5100_tco: PCI Revision ID: 0x14
    Aug 14 21:55:31 ych kernel: sp5100_tco: failed to find MMIO address, giving up.
    Aug 14 21:55:31 ych kernel: MCE: In-kernel MCE decoding enabled.
    Aug 14 21:55:31 ych kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    Aug 14 21:55:31 ych kernel: EDAC MC: Ver: 3.0.0
    Aug 14 21:55:31 ych kernel: AMD64 EDAC driver v3.4.0
    Aug 14 21:55:31 ych kernel: EDAC amd64: DRAM ECC disabled.
    Aug 14 21:55:31 ych kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    Aug 14 21:55:31 ych kernel: ppdev: user-space parallel port driver
    Aug 14 21:55:31 ych kernel: microcode: AMD CPU family 0xf not supported
    Aug 14 21:55:32 ych kernel: psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    Aug 14 21:55:32 ych kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    Aug 14 21:55:32 ych kernel: r8169 0000:02:04.0 (unregistered net_device): not PCI Express
    Aug 14 21:55:32 ych kernel: r8169 0000:02:04.0 eth0: RTL8169sc/8110sc at 0xffffc9000214a000, 00:13:77:80:b7:a4, XID 18000000 IRQ 23
    Aug 14 21:55:32 ych kernel: r8169 0000:02:04.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
    Aug 14 21:55:32 ych kernel: random: nonblocking pool is initialized
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    Aug 14 21:55:32 ych kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    Aug 14 21:55:32 ych kernel: kvm: Nested Virtualization enabled
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0x16 (3000 MHz), vid 0x8
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0x14 (2800 MHz), vid 0xa
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0x12 (2600 MHz), vid 0xc
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0x10 (2400 MHz), vid 0xe
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0xe (2200 MHz), vid 0x10
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0xc (2000 MHz), vid 0x10
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0xa (1800 MHz), vid 0x10
    Aug 14 21:55:32 ych kernel: powernow-k8: fid 0x2 (1000 MHz), vid 0x12
    Aug 14 21:55:32 ych kernel: powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
    Aug 14 21:55:32 ych kernel: nvidia: module license 'NVIDIA' taints kernel.
    Aug 14 21:55:32 ych kernel: Disabling lock debugging due to kernel taint
    Aug 14 21:55:32 ych kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    Aug 14 21:55:32 ych kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    Aug 14 21:55:32 ych kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
    Aug 14 21:55:32 ych systemd-udevd[149]: renamed network interface eth0 to enp2s4
    Aug 14 21:55:32 ych kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
    Aug 14 21:55:32 ych kernel: mousedev: PS/2 mouse device common for all mice
    Aug 14 21:55:33 ych kernel: Adding 4193276k swap on /dev/sda7. Priority:-1 extents:1 across:4193276k FS
    Aug 14 21:55:33 ych systemd-fsck[184]: /dev/sda6: clean, 126597/13443072 files, 49010090/53756928 blocks
    Aug 14 21:55:33 ych kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
    Aug 14 21:55:34 ych systemd-journal[127]: Permanent journal is using 248.0M (max allowed 1.8G, trying to leave 2.7G free of 2.5G available → current limit 248.0M).
    Aug 14 21:55:36 ych systemd-journal[127]: Time spent on flushing to /var is 2.528424s for 693 entries.
    Aug 14 21:55:37 ych kernel: floppy0: no floppy controllers found
    Aug 14 21:55:37 ych kernel: work still pending
    Aug 14 21:55:37 ych kernel: r8169 0000:02:04.0 enp2s4: link down
    Aug 14 21:55:37 ych kernel: IPv6: ADDRCONF(NETDEV_UP): enp2s4: link is not ready
    Aug 14 21:55:37 ych kernel: r8169 0000:02:04.0 enp2s4: link down
    Aug 14 21:55:34 ych dhcpcd[205]: version 6.4.3 starting
    Aug 14 21:55:34 ych dhcpcd[205]: enp2s4: adding address fe80::f4f1:7bd7:4b15:d5b5
    Aug 14 21:55:35 ych dbus[207]: [system] Successfully activated service 'org.freedesktop.systemd1'
    Aug 14 21:55:35 ych dhcpcd[205]: enp2s4: waiting for carrier
    Aug 14 21:55:35 ych systemd-logind[206]: New seat seat0.
    Aug 14 21:55:35 ych systemd-logind[206]: Watching system buttons on /dev/input/event2 (Power Button)
    Aug 14 21:55:35 ych systemd-logind[206]: Watching system buttons on /dev/input/event1 (Power Button)
    Aug 14 21:55:35 ych systemd-networkd[238]: rtnl: received address for a nonexistent link, ignoring
    Aug 14 21:55:35 ych systemd-networkd[238]: rtnl: received address for a nonexistent link, ignoring
    Aug 14 21:55:37 ych slim[243]: i3 - i3
    Aug 14 21:55:37 ych slim[243]: i3-with-shmlog - i3 (with debug log)
    Aug 14 21:55:37 ych kernel: r8169 0000:02:04.0 enp2s4: link up
    Aug 14 21:55:37 ych kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp2s4: link becomes ready
    Aug 14 21:55:37 ych dhcpcd[205]: enp2s4: carrier acquired
    Aug 14 21:55:37 ych dhcpcd[205]: DUID 00:01:00:01:1b:69:2e:93:00:13:77:80:b7:a4
    Aug 14 21:55:37 ych dhcpcd[205]: enp2s4: IAID 77:80:b7:a4
    Aug 14 21:55:37 ych systemd-timesyncd[201]: Network configuration changed, trying to establish connection.
    Aug 14 21:55:37 ych slim[243]: i3 - i3
    Aug 14 21:55:37 ych slim[243]: i3-with-shmlog - i3 (with debug log)
    Aug 14 21:55:37 ych slim[243]: /usr/bin/xauth: file /var/run/slim.auth does not exist
    Aug 14 21:55:37 ych dhcpcd[205]: enp2s4: rebinding lease of 192.168.0.2
    Aug 14 21:55:37 ych slim[243]: X.Org X Server 1.16.0
    Aug 14 21:55:37 ych slim[243]: Release Date: 2014-07-16
    Aug 14 21:55:37 ych slim[243]: X Protocol Version 11, Revision 0
    Aug 14 21:55:37 ych slim[243]: Build Operating System: Linux 3.15.5-2-ARCH x86_64
    Aug 14 21:55:37 ych slim[243]: Current Operating System: Linux ych 3.14.16-1-lts #1 SMP Fri Aug 8 06:23:48 UTC 2014 x86_64
    Aug 14 21:55:37 ych slim[243]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4ccffff2-b9d7-4f91-951c-086012178dfb rw quiet resume=/dev/disk/by-uuid/88ac4005-a90a-4f54-9cde-72060b2c1da4
    Aug 14 21:55:37 ych slim[243]: Build Date: 31 July 2014 11:53:19AM
    Aug 14 21:55:37 ych slim[243]: Current version of pixman: 0.32.6
    Aug 14 21:55:37 ych slim[243]: Before reporting problems, check http://wiki.x.org
    Aug 14 21:55:37 ych slim[243]: to make sure that you have the latest version.
    Aug 14 21:55:37 ych slim[243]: Markers: (--) probed, (**) from config file, (==) default setting,
    Aug 14 21:55:37 ych slim[243]: (++) from command line, (!!) notice, (II) informational,
    Aug 14 21:55:37 ych slim[243]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    Aug 14 21:55:37 ych slim[243]: (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 14 21:55:37 2014
    Aug 14 21:55:37 ych slim[243]: (==) Using config file: "/etc/X11/xorg.conf"
    Aug 14 21:55:37 ych slim[243]: (==) Using config directory: "/etc/X11/xorg.conf.d"
    Aug 14 21:55:37 ych slim[243]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    Aug 14 21:55:37 ych dhcpcd[205]: enp2s4: soliciting an IPv6 router
    Aug 14 21:55:38 ych systemd-timesyncd[201]: Network configuration changed, trying to establish connection.
    Aug 14 21:55:39 ych systemd-timesyncd[201]: Network configuration changed, trying to establish connection.
    Aug 14 21:55:39 ych kernel: nvidia 0000:01:00.0: irq 41 for MSI/MSI-X
    Aug 14 21:55:40 ych kernel: NVRM: Your system is not currently configured to drive a VGA console
    Aug 14 21:55:40 ych kernel: NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    Aug 14 21:55:40 ych kernel: NVRM: requires the use of a text-mode VGA console. Use of other console
    Aug 14 21:55:40 ych kernel: NVRM: drivers including, but not limited to, vesafb, may result in
    Aug 14 21:55:40 ych kernel: NVRM: corruption and stability problems, and is not supported.
    Aug 14 21:55:41 ych slim[243]: pam_unix(slim:session): session opened for user dontdieych by (uid=0)
    Aug 14 21:55:41 ych systemd-logind[206]: New session c1 of user dontdieych.
    Aug 14 21:55:41 ych systemd[311]: pam_unix(systemd-user:session): session opened for user dontdieych by (uid=0)
    Aug 14 21:55:42 ych systemd[311]: Starting Paths.
    Aug 14 21:55:42 ych systemd[311]: Reached target Paths.
    Aug 14 21:55:42 ych systemd[311]: Starting Timers.
    Aug 14 21:55:42 ych systemd[311]: Reached target Timers.
    Aug 14 21:55:42 ych systemd[311]: Starting Sockets.
    Aug 14 21:55:42 ych systemd[311]: Reached target Sockets.
    Aug 14 21:55:42 ych systemd[311]: Starting Basic System.
    Aug 14 21:55:42 ych systemd[311]: Reached target Basic System.
    Aug 14 21:55:42 ych systemd[311]: Starting Default.
    Aug 14 21:55:42 ych systemd[311]: Reached target Default.
    Aug 14 21:55:42 ych systemd[311]: Startup finished in 124ms.
    Aug 14 21:55:42 ych slim[243]: /usr/bin/xauth: file /home/dontdieych/.Xauthority does not exist
    Aug 14 21:55:43 ych dhcpcd[205]: enp2s4: leased 192.168.0.2 for 7200 seconds
    Aug 14 21:55:43 ych dhcpcd[205]: enp2s4: adding route to 192.168.0.0/24
    Aug 14 21:55:43 ych dhcpcd[205]: enp2s4: adding default route via 192.168.0.1
    Aug 14 21:55:43 ych systemd-timesyncd[201]: Network configuration changed, trying to establish connection.
    Aug 14 21:55:43 ych dhcpcd[205]: forked to background, child pid 362
    Aug 14 21:55:45 ych slim[243]: (INFO-367 /build/fcitx/src/fcitx-4.2.8.4/src/lib/fcitx/addon.c:151) Load Addon Config File:fcitx-spell.conf
    Aug 14 21:55:45 ych slim[243]: (INFO-367 /build/fcitx/src/fcitx-4.2.8.4/src/lib/fcitx/addon.c:151) Load Addon Config File:fcitx-autoeng.conf
    Aug 14 21:55:45 ych slim[243]: (INFO-367 /build/fcitx/src/fcitx-4.2.8.4/src/lib/fcitx/addon.c:151) Load Addon Config File:fcitx-notificationitem.conf
    Aug 14 21:55:45 ych slim[243]: (INFO-367 /build/fcitx/src/fcitx-4.2.8.4/src/lib/fcitx/addon.c:151) Load Addon Config File:fcitx-xim.conf
    Aug 14 21:55:45 ych slim[243]: (INFO-367 /build/fcitx/src/fcitx-4.2.8.4/src/lib/fcitx/addon.c:151) Load Addon Config File:fcitx-remote-module.conf
    Aug 14 21:55:45 ych slim[243]: (INFO-367 /build/fcitx/src/fcitx-4.2.8.4/src/lib/fcitx/addon.c:151) Load Addon Config File:fcitx-punc

    I have 8600gt and a similar problem. Since kernel 3.15 resume from suspend doesn't work. The screen just stays blank. Kernel 3.14.6 works fine.

  • How can I enable OpenGL for Nvidia 7600 GT (CS4)?

    Hello,
    today I installed Photoshop CS4 and can't enable OpenGL. So I updated my Nvidia 7600GT driver and the driver info says, that OpenGL 3.0 should work, but Photoshop dosn't allow me to enable it. What can I do?
    Regards,
    Micha
    http://www.nvidia.com/object/winxp64_185.85_whql.html

    Try reseting your perfs:
    Soon as you start photoshop hit Shift, Ctrl and Alt keys at the same time. Click yes on the window that pops up.
    There is another way to do the perf thing too. Read attached under troubleshooting
    http://kb2.adobe.com/cps/404/kb404898.html#supported

  • M9517c failing Nvidia chipset; any recommendation for cooling fan?

    I have a M9517c that finally failed. Took me 3 days to diagnose.
    Do you have a recommendation for the heat sink / cooling fan combo?
    can you provide a link?
    Many thanks

    Hello HPElite. I would recommend you contact our HP Part Store, as they will be able to help determine the best part for you, and will give you the correct price. First of all, here are the specifications of your computer:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01638238
    If you want to call the Part Store, their number is 1-800-227-8164. The hours to call are Monday to Friday 7:00am-7:00pm CST, and Saturday 7:00am-6:00pm CST. If you want to check out the website, here is the link:
    http://h20141.www2.hp.com/hpparts/
    If you have any other questions for me, let me know. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • IMac 24 with Nvidia 7600...bad video card choice?

    Hi folks. I've had my iMac 24 incher for a few days now and I went to try one of my favorite game demos, Unreal Tournament 2004 and the performance I got from the video was a lot less than what I thought it would be. I have the game for my Windows machine which is a 3Ghz P4, 2GB RAM, GeForce 6600GT and the performance on that seems way better than my iMac. Why? I thought the video card it in was suppose to be pretty good (GeForce 7600GT 256mb). I changed the settings in UT to the native res of the mac but it didnt' help. Anything I can do about this? Thanks.

    He said that he was running the demo. I don't
    think
    this has been updated to universal binary.
    It has been updated. Do a search on versiontracker.
    Do you mean this?
    http://www.versiontracker.com/dyn/moreinfo/macosx/22450
    Versiontracker screwed up again. This is a patch that updates the retail release of UT 2004 for Mac to version 3369.2. It isn't the demo. The demo weighs in at nearly 600 MB. If you have a link to a download of an actual UB demo of UT 2004, please feel free to share.
    20" iMac CD (early '06)   Mac OS X (10.4.7)  

  • Problems with NVIDIA Geforce Go 7600 display driver for Qosmio G30

    A few days ago my Qosmio G30 ( Windows XP) didnot start properly. First the srceen become white and after a few reboots the screen shows a lot figures and after that I get the a lot of vertical stripes over the screen. I only can start in protected mode of windows but the vertical stripes stay.After consultating the Toshiba help desk I find on the Toshiba website a driver for the Nividia Geforce Go 7600.
    But I cannot installed it because Microsoft Windows XP reported that the software  have no digital signiture. When I ignore that message the installtion goes on but without result. The computer gives the message that the Nvidia 7600 is not installed properly.
    Please have someone a solution of my problem. (Johnnyboy have reported the same problem )

    I sounds like a dying video chip, or at least my p100 had simmilar issues when it needed the video replaced.  Odd characters on the screen at random, plus locking up occasionally.  Mine failed from excessive heat.

  • IQ790 roll-back to XP?

    Is it possible to roll-back the Windows OS from Vista to XP, and get all the drivers?
    I have been given a TouchSmart IQ790 with software problems and installed Windows XP SP3 (fully updated).
    It's running fine, but is not recognising the nVidia graphics card. I have visited the nVidia website, and their auto-detect tool does recognise the card either. Is there a Nvidia driver available somewhere that will work with XP?
    Cheers,
    fred

    Hi:
    Sorry the graphics driver didn't work.
    The product specs page states your PC has the nForce 430, NVIDIA GeForce 6100 graphics, so I was hoping that nVidia graphics driver would work.
    See if this one works...
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
    If not try one for Vista:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-54536-1&cc=us&dlc=en&lc=en&...

  • Games no longer run, problem with nvidia driver?

    Any game like Enemy Territory or Alien Arena no longer works.  When I try to start them, I get the error
    loading libGL.so.1: QGL_Init: dlopen libGL.so.1 failed: /usr/lib/libGL.so.1: undefined symbol: _nv000008gl
    I tried reinstalling the nvidia driver and nvidia-utils but it didn't help.  Does anyone have any suggestions?  If it matters, my card is an nVidia 7600.
    Thanks!
    e:  Tried installing nvidia-beta and nvidia-utils-beta and that didn't work, but installing the latest driver from nVidia's website worked.  Should I be concerned about dependency issues though, since I didn't install it through Pacman?
    Last edited by Yes (2010-04-25 22:12:17)

    Looking at http://www.shatters.net/forum/viewtopic.php?f=3&t=10047 I will make an educated guess:
    You installed Nvidia's driver, and let it overwrite mesa's headers. Take a look at my rant if you want background info.
    So, re-install mesa-lib, or "mesa", or whatever it's called in your distro.
    Any packages that you recompiled yourself? Recompile them again, after re-installing mesa.
    Last edited by brebs (2010-04-26 05:20:50)

  • Has the NVidia GeForce 8600M GT logic board replacement program been extended by a year?

    I have heard that the logic board replacement program for MacBooks Pro with the failed NVidia 8600M GT chip has been extended from 3 to 4 years after the date of original purchase. However, a local AASP had no knowledge of such an extension. Is this true? I have a MacBook Pro 17" 2.6GHz that was purchased in 2008.

    eww wrote:
    when you took it in, it had been more than four years since your 2007 machine was originally sold, that's why you got the response you did.
    Actually it was within the time frame, it felt like it was just last month, when it was like several months ago.
    Just dragged the 15" recently out to see to use it for testing *cough* and low and behold it's worthless now.
    The problem I have is I told them at the Genius Bar the video was going, but couldn't prove it as it was very rare it occured.
    But they ran their little tests and gave me a load of crap, now it's dead. $2500 down the toilet.
    I know what did it, Lion. Lion was the cause, it ran like a fine machine under Snow, fscking Lion, I'm glad I didn't put that POS on my new 17"
    http://reviews.cnet.com/8301-13727_7-20091204-263/graphics-issues-plaguing-os-x- 10.7-lion-upgrades/
    My word the OP, don't let the Genius Bar screw you with the same crap they gave me, call corporate and raise ****!

  • Will Apple replace NVIDIA graphics card for free?

    I've read a lot of discussions on here about the failing NVIDIA cards and Apple having to replace the entire motherboard. Some users have had the experience of Apple replacing the card free of charge, others have had to pay a hefty price. Is there any logic to Apple's discretion of the charge? If so, how do I navigate the "genius" system to avoid a fee? I am, of course, interested in paying as little as possible as this is obviously a manufacturing defect and the costs should be covered by the manufacturer; if there is not going to be a TOTAL RECALL!
    "Get to za choppah"

    NMacUser wrote:
    Will apple replace my 13 inch MBP battery for free if its health id below 80% and its still under warrenty??
    My MBP is only 7 months and its health is already 85%!  Please let me know!! Thank You!!
    Not quit sure if we are are talking about one or two batteries.  Where are you getting "health id"  ??? numbers.
    Non-the-less you can option click on the battery icon menulet in the upper right. What is the stated condition?
    You can recalibrate the batery if you have never done it.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/9036.html
    This may help.
    Otherwise I would take it to an Apple Retail Store or an Apple Authorized Service Provider  (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store,  make a reservation.

  • Sound Card making Windows Fail to loa

    Hiya, had a problem with Windows XP Pro freezing at the load screen, pulled my Sound Blaster Audigy 2 Value, and booted up. Everything works fine again. I built the PC myself, P5ND2-SLI mobo that uses NForce 4 chipset, Nvidia 7600 GT vid card, Intel Pentium D 830 3.0 ghz 775 socket CPU, 000 GB Corsair memory. The mobo has Realtek onboard sound which is disabled in bios already. Any clue what the problem may be?Message Edited by Coriff on 09-9-2006 09:26 PM

    Having exactly the same problem. Using Win XP Pro, card is Audigy Platinum EX. Since I attempted to re-install the Audigy, can't load Windows. Gets to the load screen and then loops back to the start of the boot sequence. I am now without audio on my system and can't find a fix. Next move is new card, different company.

Maybe you are looking for