Failed open document

I just recently backed up all my files onto a
external harddrive and then installed the latest MAC operating
system "Tiger". Since this time every .fla file I attempt to open
gives me an error
"failed to open file". The Flash MX files were created with
the same version I'm trying to open them on.
Does any one know how to fix this problem? I prey that these
files did not get corrupted some how. If so, I don't know why they
would be corrupted.

You get this error when you click on the fla or within the
Flash authoring environment when you use "File - Open"?
Also, do you have similar errors with any other files?

Similar Messages

  • Access Denied - Failed to Open Document

    I've done a few hours of searching for a solution to my problem with no specific answer helping me.
    I recently upgraded 63 various reports from Crystal Reports version 8.5 to Crystal Reports 2011 (using a Windows 7 box). I realigned all of the report fields, and ensured all the variables within the report worked as they did before. Basically all 63 worked like old. I deployed these reports to a Windows 2012 R2 server which has Crystal Reports 2011 installed (as well as Crystal Report Runtime for .Net Framework) and 4 out of 63 no longer work. When I try to open them with Crystal Reports 2011 it gives me an error 'Access Denied [line break] Failed to Open Document' In the Event Viewer for Windows it gives me the following details as to what happened.
    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             crw32.exe
      Application Version:                           14.0.4.738
      Application Timestamp:                     4fd6ccca
      Fault Module Name:                          crw32.exe
      Fault Module Version:                        14.0.4.738
      Fault Module Timestamp:                  4fd6ccca
      Exception Code:                                  c0000005
      Exception Offset:                                000cf0e5
      OS Version:                                          6.1.7601.2.1.0.272.7
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    Here are the things I've done to try and troubleshoot/resolve it:
    Re-upgrade the original CR 8.5 Report to 2011 and migrate it to server. (Didn't work)
    Migrate the original CR 8.5 Report to Windows 2012 Server and try to upgrade it there (Same error on 8.5 report)
    Repair/Reinstall Crystal Reports 2011 on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
    Repair/Reinstall Crystal Reports Runtime for .Net Framework on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
    Add three System Environment Variables to enable Crystal Reports Error Logging through CRLogger.dll (LOGGING_DIR = C:\CRLOGGING; LOGGING_ENABLED_ASSERT = 1; LOGGING_ENABLED_RUNTIME = 30)
    Now..the error logging gives me error numbers, and which line of which .cpp file is encountering a problem, but that really doesn't help me because I don't have access to Crystal Reports Source Code. (Pasted below for those who are really curious).
    I've seen Ludek or other SAP staff shut down discussions with some line about 'Report Development is not a ...' but I feel that this isn't related to how the report was developed and instead something in the application not jiving well with something else.
    Any help or suggestions would be incredibly well received and appreciated.
    Time Stamp
    Thread ID
    File Name
    Line Number
    Logged Data
    Level
    2015-4-24-12-48-43
    3820
    ..\cserrinf.cpp
    523
    Error 31831 (..\..\src\data\preQEFileIO.cpp, 3578)
    1
    2015-4-24-12-48-43
    3820
    ..\cserrinf.cpp
    523
    Error 31831 (..\..\src\data\preQEFileIO.cpp, 3847)
    1

    Hi Thomas,
    Statistically speaking, 4 out of 63 reports isn't bad for a migration.  So something in these 4 reports is different from the others.  I've had this happen if there are images or an object inserted into the report and the update doesn't know how to handle that object. 
    The best way to try and find the problem is by process of elimination.  Open the reports again in 8.5 and remove a couple of things at a time.  Save it then open in 2011 and see if it fails or not.  Continue doing that until the report actually opens.  The problem could be anything from a formula or printer settings to attachments. 
    Good luck,
    Brian

  • Flash5.5 "failed to open document" error message

    Yesterday I worked on two files both worked fine.  I saved my work and a backup. This morning I got the dreadful message "failed to open document" followed by the path to the file. The output panel gave me this message:
    The following JavaScript error(s) occurred:
    In file "/Users/lucilarios/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Javascript/ObjectFindAndSelect.jsfl":
    Cannot find file /Users/lucilarios/Desktop/Trabajo_Macondo3/ProjectAlgebra09/TutorialsAlgebra/Integers/Law sOfAddition/NewProject/AssocLawAdd.fla.
    The info on the file size shows 0 bites
    Both the file and its backup were corrupted.
    Are there compatibility issues betweenAdobe CS5.5 Programs and Mac OX Lion?  Lion has crashed my computer several times and other programs like Photoshop and Adobe Bridge have also misbehaved.  Has anybody experienced any issues with Lion and Flash?

    Hi ,
    I'm sorry for the inconvience . We are actively working on with customers in resolving this issue . 
    Please help us answer the following question below so we can reproduce this issue and provide some solution .
    About      the location where .fla file is being saved
    To a local drive? (eg. hard drive, SSD drive, USB key,       SD card, opened as email attachment, opened from a zip archive, etc)
    …or over a network? (eg. shared Windows folder across       Active Directory network, SMB share between OSX machines, symbolic       link/junction points to path) If so, do they have full file permissions       to write to that folder?
    The      .fla file before corruption/crash
    Reproducible from a new document?
    File history. eg. originally created in CS4, saved in       CS5 and re-saved in CS5.5
    3. Where was the backup copy saved ?
    4. Did flash crash y'day while you were saving your Fla file ?
    Can you please  email me your corrupt fla as well as any previous version of a working  backup copy if any to [email protected] .
    Thanks
    Sukhbir
    Flash Authoring

  • Crystal Reports ActiveX Designer Failed to open document

    Yesterday I created a report in Visual Studio 2008 with about 20 subreports, each subreport containing a single aggregate query (i.e count or sum). I then saved the report file. Hours later when I attempted to reopen the report in Visual Studio I recived the message box "Crystal Reports ActiveX Designer Failed to open document". The report file was completely unusable - it could not be opened for editting.
    Today I repeated the process twice (once ith multiple subreports and once with all aggregate queries combined in a single subreport), only to have the new report files become unusable with the same error message. I am completely shocked at this behaviour from Crystal Reports. I have now spent 10+ hours with no usable report. I realy need a fix for this ASAP!!! Any suggestions would be greatlhy appreciated.

    Hi Jeff,
    Just wanted to confirm you were on SP1.
    I've found that these types of error are usually due to corrupt system files or sometimes even Anti-virus software denying access. If there is no error it's not CR corrupting the file.
    Look in your AV logs to see if it's logging anything.
    Another possibility is with MS pushing out patches they can also cause problems. I've see them change permissions on our dependencies that can cause problems.
    Sorry I can't be specific but without seeing your report or any details you'll have to determine at which step in the report it stops working.
    Can you save any reports now?
    Steps to debug, create a new report with no subreports and save it. Then re-open, if that works then start adding one subreport and then save/open. It may be something related to either the subreports or the number of subreports.
    You could try doing a repair install of VS and SP1.
    Was this working at one time or is this something new, do you have other reports that are similar that have problems?
    You need to debug the report and find out what is causing it to be corrupted. Try adding the 20th subreport and then delete it also.
    Don

  • "failed to open document" help

    I have been working on a flash file for school using CS5.5.  Everything was working, and I even downloaded a trial of CS5.5 on my computer to work on the project, but now I am in class and it will not open.  It keeps saying "failed to open document."  I'm not sure what went wrong, and I need this file by next thursday for my class.  I need to know if there is any way to fix this without redoing my entire project from scratch.

    thank you! I'll let you know if it worked!
    the only problem is that none of my tweens and actions are correct.

  • Flash CS5 - Failed to Open Document

    Hello, I am running Flash CS5. I was saving a document and then the program crashed in the middle of saving. It now says "failed to open document". I am running a Macbook, so I can't try that little WinRAR thing I've been told to do here. Help!
    I've been saving to the local hard drive. The file was created and edited exclusivey in CS5 on this machine.
    Info:
    Machine: 2010 Era Macbook Pro
    OS: OSX Lion 10.7.5

    if you have a working swf, you can try to decompile it using a swf decompiler. 
    sothink's is the best, imo.

  • HELP!Crystal 10 -- ''Failed to open document. Read past end TSLV record.''

    I create new report using Wizard, Add Command (Oracle query).
    I see table in my report, I can run ... Then I save my report and close it.
    But when I try to open again -- I can't open again and I see error:  "Failed to open document. Read past end TSLV record."
    Please, help me ! :((((

    The following SAP Note may help you!!!!
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    Regards,
    Raghavendra

  • Crystal 10 -- ''Failed to open document. Read past end TSLV record.''

    I create new report using Wizard, Add Command (Oracle query).
    I see table in my report, I can run ... Then I save my report and close it.
    But when I try to open again -- I can't open again and I see error:  "Failed to open document. Read past end TSLV record."
    Please, help me ! :((((

    duplicate - please do not post multiple times

  • Cs6 Flash Failed to open document

    Help using mac 10.7.4  created document with cs6 flash.  Wanted to continue working on it but couldn't re-open. Got message  "failed to open document". Can this document be saved?

    Pay special attention to this portion (if you can't find a Mac equiv of WinRAR you can rename it to .zip as well if you have a .zip repair utility (StuffIt?)), FLAs are just compressed files:
    Recovering the damaged  or corrupt files
    Change the extension of .fla to .rar.
    Open it using the WinRAR application.
    Winrar throws a warning stating that you attempted to open damaged archive, you can safely Ignore the warning.
    Go to Tools->Repair Archive. This ensures that the archive and hence, the FLA is repaired.
    Change the extension to .fla.
    If you can't find a repair utility you can PM me a link to download the FLA and I can try to recover it for you via WinRAR.

  • Discoverer Error - "Failed to open document"

    Hi,
    I'm having this wierd problem. Sometimes, I get a message "
    Failed to open Document" error on Discoverer 4 User edition. I
    cannot open the worksheet I create. It does not display any
    error code or message.
    Please advice

    I assume that you created the workbook in Discoverer Desktop and it does not work in either Plus or viewer. Does recreating the workbook under a new name correct the problem? IF not can you recreate the workbooks through Discoverer Plus and format the layout through the Discoverer Desktop. Does this fix the problem?
    Christopher
    www.iloveapple.com/disco/

  • Failed to Open Document (file not 0 bytes) - Suggested resolution!

    (Posting this to assist others with same problem - I have actually resolved for me - please note Adobe developers for suggested improvement for work around… there is still a bug in there somewhere with corrupt files)
    Using Flash Pro CS6 (v 12.0.0.481) on Mac OSX 7.5
    Problem:
    Tried to open a file that I was working on last night (after MAC crashed and untidy shut down, but had saved file beforehand) this morning and got the error message "Failed to open document". The file has 10 MB of size (not 0 bit like other crashes that were not recoverable!).
    Resolution (work around): 
    Managed to recover the file using a combo of ideas I found on the web.
    First things first... check the file size, if the file size is 0, your pretty much stuffed since the file is empty, sorry. If however the file is populated, then this is what I did:
    1) copied the file and saved it to a new location (so working on a duplicate)
    2) downloaded a rar file tool (Winrar or I used The Unarchiver for Mac)
    3) Change the name of the file extension of that duplicate to .rar (you will get a warning message, accept it)
    4) Double click on the .rar file to open it using the .rar extraction ap you selected - you will be asked to say where you want that file to be extracted to - I just created a new folder on my desktop. In the process of extracting that file (believe it or not it is stored up as many parts), I got error messages that 3 images that were used in the file were corrupted. I selected to continue and ignore that. I made note of the corrupted files set.
    5) Locate the problem files (mine were in a folder called "Library" in the extracted file set) and delete those images *NOTE: you should have these copied elsewhere since they are brought into flash generally. BUT you might also like to skip this step and try the step below first - I didn't - it could be that you don't actually need to delete those images. If the step below doesn't work, then come back here and try again)
    6) In the new extracted file directory, there should be the same file name you want, just not as .fla but as a .xfl version. This means an uncompressed version (I have no idea what that really means) - double click on that same named file.xfl
    7) This .xfl file then opened for me in Flash
    8) Save that file again as .fla, add back any images that were needed and corrupted - mine were not needed so I just left them.
    I love working with flash but the instability is really a problem - I pretty much have to save a working file to another location and then try to reopen that before closing the original or shutting down / restarting.  This time I was lucky (only 1 hour of research and trial and error to recover) but previously I have had 0 byte files and had no choice but to start again (since time machine failed to save earlier versions).
    Suggested resolution adobe developers:
    It would be very useful if Flash told you which files were corrupted and then gave you an option to open the document with corrupted files removed as a copied version - at least this way we could work with most of the file to rebuild.

    This problem has been around for years and the solution you suggest is only the second best in my opinion.
    The best would be to have a Failsafe like many other products/companies already have going: Corel, Autodesk, Microsoft etc.:
    If their programs stop working they alert you to the fact and give you the opportunity to safe a copy of the file under a different name.
    Can`t be Rocket Science. If you can`t make your products work reliable, at least come up with manageable solutions.
    There is at least one day a month were I would be really lost without the ability of our company to rewind to the xfl version of yesterday.
    I can`t imagine what someone that works as a freelancer and hasn`t got the redundancy of companies has to go through if Flash burns him/her on a regular basis.

  • Error message: "Failed to open document

    Error message: "Failed to open document" received often while trying to open a workbook. This occurs randomly: different PC's receive this error in different workbooks while other PC's succeed in opening same workbook. Can someone advice?

    I had same problem when we were modifying few workbooks.
    when i had tried to open workbook in discoverer plus it gave me error like what u r getting. after that i opened it in desktop and without doing any changed i saved it and tried to open it again in Plus and it worked. Logic vs Magic !!!!

  • Adobe x fails to open document

    Adobe X with not open document thru iinternet explorer

    When that happens, can you check with the Task Manager (Processes tab) if AcroRd32.exe is already running?  If so, can you kill the process from Task Manager and try again?
    Another thing to try when this happens is to restart Windows, does it work after that?

  • My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

    Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
    Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
    Any idea what could be causing this???  I was told that to many pictures slow down the system, I have only 700 pic on file

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • XI 3.0, Open Document  and scheduling

    All,
    We've noticed an issue with open document function when using strings with more than one word (eg San Diego).  Only the first word (San) gets passed.  Report scheduling also fails when we enter in strings with two words.  Single word strings work fine with scheduling. 
    Our back end is SAP BEx query. 
    Thanks

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek

Maybe you are looking for