Failed retrieving file 'core.db.tar.gz'
Hello !
I'm trying to install Archlinux from another distro (currently gentoo) but when I have to do pacman_chroot -Syf base --ignore kernel26 (this uses the static version of pacman), I get nasty errors :
gyscos ArchLinux # pacman_chroot -Syf base --ignore kernel26
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from locke.suu.edu : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from mirrors.unixheads.org : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from ftp-linux.cc.gatech.edu : Le réseau n'est pas accessible
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from ftp.ibiblio.org : Connexion terminée par expiration du délai d'attente
The error is in french, meaning "Connexion timed out"
I am behind a proxy, but it is configured in http_proxy and ftp_proxy vars, and in my ~/.wgetrc
Any idea what I have to do ? Thanks !
EDIT : if I try to wget ftp://ftp.archlinux.org/core/os/i686/core.db.tar.gz, it works just fine... so the problem shouldn't be my network...
Last edited by Gyscos (2009-09-19 09:44:21)
Thanks so much ! It was using tmp/pacman.conf and not etc/pacman.conf.
Now it works so fine !!!
Similar Messages
-
[SOLVED] Pacman failed retrieving file 'core.db' after removing KDE
Hey, I had to remove KDE and foolishly used the -Rsc flag. Now, trying to update yields:
[root@Gal-PC2 gal]# pacman -Sy
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.isoc.org.il : Resolving timed out after 10524 milliseconds
error: failed retrieving file 'core.db' from mirror.us.leaseweb.net : Resolving timed out after 10523 milliseconds
I tryed using the -Sy and -Syy flags to update the database, and made sure I am not using ipv6. I think the -Rsc flag might deleted an importent package. I can connect to the net, and I can acess mirrors using http and I can ping the mirrors. The error persists on a large number of mirrors. Any help will be appriciated.
Last edited by Greenstuff (2015-02-08 20:49:24)Sorry, will do!
The debug printed a lot of the first errors, so I cut them. This is what pacman --Syu --debug show:
debug: adding new server URL to database 'multilib': [url]http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.ds.hj.se/pub/os/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.uni-kl.de/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.tu-chemnitz.de/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirror.lnx.sk/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirrors.st.uz/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirrors.mithril.org.ua/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.uni-bayreuth.de/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://artfiles.org/archlinux.org/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://repo.ukdw.ac.id/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://linux.cs.nctu.edu.tw/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.kaist.ac.kr/ArchLinux/multilib/os/x86_64[/url]
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
:: Synchronizing package databases...
debug: url: [url]http://mirror.isoc.org.il/pub/archlinux/core/os/x86_64/core.db[/url]
debug: maxsize: 26214400
debug: using time condition: 1422991262
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 28 from transfer
error: failed retrieving file 'core.db' from mirror.isoc.org.il : Resolving timed out after 10523 milliseconds
debug: url: [url]http://mirror.us.leaseweb.net/archlinux/core/os/x86_64/core.db[/url]
debug: maxsize: 26214400
debug: using time condition: 1422991262
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
EDIT: SOLVED!
Ok, so I did indeed disable ipv6 as I promised, but turns out I put in the GRUB kernel line "ipv6.disable_ipv6=1". Upon re-reading the wiki, turns out this means ipv6 is disabled but tunnels with ipv6 may be opened by programs. I changed to "ipv6.disable=1" and pacman updates away! I hope others will find this usefull. Be careful!
Last edited by Greenstuff (2015-02-08 20:52:45) -
[SOLVED]Failed retrieving file 'extra.db.tar.gz'
I was just trying to install GNOME and it failed when trying to download libxfixes-4.0.4-1-i686.pkg.tar.gz
Package wasn't found. So I ran -Syy and it is failing to retrieve extra.db.tar.gz
Is anyone else having this problem?
Last edited by mack (2010-03-01 02:21:40)Tried a bunch of different mirrors. Used mirrors from rankmirrors and then mirrors from updated mirror list I received last night.
pacman.conf
[options]
HoldPkg = pacman glibc
SyncFirst = pacman
Included: core, extra, community -
Cannot sync pacman; error: failed retrieving file, No address record
Hello,
As a heads up, I'm trying not to repost
I've searched the forums but found nothing, I'll keep looking. I've read the front page news about the mirrorlist and tried using the old mirrorlist file. I've been on #archlinux on IRC. Nothing yet.
Here is an example of what I see:
root@dungeon pacman.d # pacman -Sy
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update core (No address record)
error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update extra (No address record)
error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update community (No address record)
error: failed to synchronize any databases
I've commented out all but one of the servers in the mirrorlost file to shorten the output.
Any ideas?Snowman wrote:You are trying to fetch non-official dbs which are not on the Arch Linux mirrors. Are you using Chakra? Post your pacman.conf
no I am using normal Arch, and it was working fine until i updated on tuseday. I am using "yaourt -Syu --aur" to update.
My actual pacman.conf is (changed automaticly to this within unsuccesfull update yesterday):
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
[core-testing]
Include = /etc/pacman.d/mirrorlist
[desktop]
Include = /etc/pacman.d/mirrorlist
#[desktop-testing]
#Include = /etc/pacman.d/mirrorlist
[platform-testing]
Include = /etc/pacman.d/mirrorlist
[apps]
Include = /etc/pacman.d/mirrorlist
#[apps-testing]
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
NOW I tried the saved pacman.conf (wich worked fine for months) wich is like this
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
#ArchAudio
# tried and tested packages
[archaudio-stable]
Server = http://repos.archaudio.org/stable/x86_64
#ArchAudio
# these are..for testing?
[archaudio-testing]
Server = http://repos.archaudio.org/testing/x86_64
#ArchAudio
# for your pleasure
[archaudio-experimental]
Server = http://repos.archaudio.org/experimental/x86_64
and tried to update with it using pacman, wich doesn't succed also:
[studio@myhost ~]$ sudo pacman -Syu
Senha:
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
:: Sincronizando a base de dados de pacotes...
erro: falha ao atualizar core (nenhum servidor configurado para o repositório)
erro: falha ao atualizar extra (nenhum servidor configurado para o repositório)
erro: falha ao atualizar community (nenhum servidor configurado para o repositório)
archaudio-stable está atualizado
archaudio-testing está atualizado
archaudio-experimental está atualizado
:: Iniciando atualização do sistema...
atenção: bristol: local (0.60.5-1) é mais novo que archaudio-testing (0.40.8-1)
atenção: fil-plugins: local (0.3.0-4) é mais novo que archaudio-testing (0.3.0-3)
atenção: guitarix: local (0.11.0-1) é mais novo que archaudio-testing (0.06.0-1)
atenção: kernel26rt: local (2.6.33.7_rt29-1) é mais novo que archaudio-stable (2.6.31_rt10-4)
atenção: lash: local (0.6.0~rc2-3) é mais novo que archaudio-testing (0.6.0~rc2-1)
atenção: ll-plugins: local (0.2.1-4) é mais novo que archaudio-testing (0.2.1-3)
atenção: lv2-c++-tools: local (1.0.3-1) é mais novo que archaudio-testing (1.0.2-1)
atenção: lv2vocoder: local (1-4) é mais novo que archaudio-testing (1-3)
atenção: rakarrack: local (0.5.8-1) é mais novo que archaudio-testing (0.4.2-1)
atenção: rev-plugins: local (0.3.1-3) é mais novo que archaudio-testing (0.3.1-2)
atenção: swh-lv2: local (1.0.15-3) é mais novo que archaudio-testing (1.0.15-2)
não há nada a fazer
[studio@myhost ~]$
!!!all messages are in portuguese but I think it is possible to understand them, if not i will translate
EDIT:
OK, I undestand the last problem and I changed my mirrolist from
# 2010-08-11 23:15
# generated by reflector
# ranked by rankmirrors
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
Server = ftp://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
Server = http://archlinux.limun.org/$repo/os/$arch
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
to
# 2010-08-11 23:15
# generated by reflector
# ranked by rankmirrors
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirrors.kernel.org/archlinux/$repo/os/x86_64
Server = http://archlinux.c3sl.ufpr.br/$repo/os/x86_64
Server = http://archlinux.limun.org/$repo/os/x86_64
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
Server = http://mirrors.kernel.org/archlinux/$repo/os/x86_64
Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
and now it's working again
but I don't understand how this all happened
AND: how can I force reflector to output a correct mirrorlist for 64bit?
Last edited by capoeira (2010-08-12 15:18:15) -
[SOLVED] Pacman error: failed retrieving file : No address record
I just installed Arch on a x86 laptop using the cd as the package source. I wanted to do a net install, but when I attempted to (regardless of the mirror) I got many responses from pacman in tty7 of "No address record". This happened despite having a network connection and being able to ping any site from the cli.
After installing, I am still having the same problem. The laptop is plugged in via ethernet, and I can ping any site I want, but a call to pacman -Syyu just returns numerous errors such as
error: failed retrieving file 'core.db' from mirror.rit.edu : No address record
And just as a test, I was getting replies when pinging mirror.rit.edu.
Last edited by process91 (2011-11-18 18:21:17)Try the following steps:
1 - Set the VirtualBox Networking option to NAT
2 - Start the arch machine in the VirtualBox
3 - Edit /etc/rc.conf as a dynamic IP:
HOSTNAME="arch"
interface=eth0
address=
netmask=
broadcast=
gateway=
4 - Run dhcpcd
5 - Try to ping a couple of sites, or your router
If you still can't ping or anything, I suggest you start a new thread specifically about your problem. Include the output from "ipconfig -a". You're not going to get much help from posting in a thread marked "[SOLVED]".
Last edited by process91 (2012-01-18 07:21:14) -
IPV6 issues during the installation? "error: failed retrieving file"
Hi!
I currently try to install Arch on my Notebook using the Newbie Guide from the German Arch Wiki. Everything seemed to work fine until I got to the point of installing the base system using
pacstrap /mnt base base-devel wpa_supplicant
. The downloading process fails and returns about the same error message for every mirror:
error: failed retrieving file 'core.db' from MIRRORNAME : Resolving timed out after XY milliseconds
I already tried to use different mirrors, but none of them worked. I tried to reach them on another machine via the browser and could access them, so they're definitly up. It therefore could be my internet connection, but I'm connected via an ethernet cable and can ping e.g. google.com or archlinux.org without any problems. I looked up the issue on different forums and almost everyone said that it's an issue caused by ipv6; I tried different workarounds, but none of them worked since most of them were used on an Arch system that was already installed but had problems with pacman. Due to the fact that I'm encountering this problem on a CD that I try to install Arch with, most of the files I'm supposed to edit to disable ipv6 aren't there (yet?) - and the other workarounds just didn't work. I really want to install Arch on my system, but can't continue with the installation when pacman can't reach the mirrors.
I therefore need your help to solve this; like I said, it's probably an issue with ipv6, but I just can't find out how to disable it on my installation medium (I burned the archlinux-2014.11.01-dual.iso on it, if that matters).
Last edited by Nex (2014-11-15 15:05:06)run ping6 -c 4 google.com and post the output.
alss post the output of :
ip addr
ip route -4
ip route -6
Last edited by Lone_Wolf (2014-11-15 16:37:13) -
Error: failed retrieving file
everytime I try to download a file from pacman or yaourt, I get this:
error: failed retrieving file 'whateverfileimdownloading.tar.gz' from mirrors.gigenet.com : Not Found
I'm trying to install mathmap in gimp 2.6, but I this happens and mathmap doesn't seem to install:
:: Retrieving packages from extra...
error: failed retrieving file 'gtksourceview-1.8.5-3-i686.pkg.tar.gz' from mirrors.gigenet.com : Not Found
gtksourceview-1.8.5... 553.3K 985.9K/s 00:00:01 [#####################] 100%
:: Retrieving packages from community...
error: failed retrieving file 'gimp-mathmap-1.2.4-4.pkg.tar.gz' from mirrors.gigenet.com : Not Found
gimp-mathmap-1.2.4-4 221.4K 788.9K/s 00:00:00 [#####################] 100%
checking package integrity...
(2/2) checking for file conflicts [#####################] 100%
(1/2) installing gtksourceview [#####################] 100%
(2/2) installing gimp-mathmap [#####################] 100%
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so.3.3.8 is truncated
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so is truncated
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so.3 is truncated
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so.3.3 is truncatedI think, you should change the server
(open the file /etc/pacman.d/mirrorlist with i.e. nano and put # infront of Server = http://mirrors.gigenet.com/archlinux/$repo/os/i686 and remove the # infront of another server)
On http://mirrors.gigenet.com/, there is no (more?) a directory for arch.
Last edited by ZaQ (2010-01-18 18:47:08) -
Error: failed tetrieving file 'core.db'
I'm trying to install Arch on a VM and after I do a
pacstrap -i /mnt base
I get
error: failed tetrieving file 'core.db' from archlinux.cu.be : Resolving timed out after 10520 milliseconds
and it's the same for all the other mirrors.
I tried to Google an answer for no avail. Any hint?
Thanksbbao5 wrote:
In that thread the solution is:
I added a ipv6.disable=1 to the boot parameters and a noipv6rs to the /etc/dhcpcd file, and everything turned ou to work ok!
But I don't know how it's possible to boot with parameters a live CD.
Press [Tab] on the Live CD menu to edit the selected boot options, and then add 'ipv6.disable=1' (with no quotes) to the end of the line that appears.
bbao5 wrote:
I tried booting with
-ipv6.disable=1
but I don't know how I'm supposed to add a "noipv6rs" to the /etc/dhcpcd file"...
Give an
echo "noipv6rs" >> /etc/dhcpcd.conf
from the live cd. Mind the double redirection (>>), a single one will overwrite the whole file.
Alternatively, you can give a
echo "noipv6rs" | tee -a /etc/dhcpcd.conf
Mind the '-a' (--add) option.
You'll have to do this again for the new installation, otherwise you'll have the same problem.
Last edited by fkol-k4 (2013-12-26 20:42:29) -
Pacman - error: failed retrieving file
Hi.
I just installed Arch on my new laptop but when I first got to the stage where you need to use pacman for the first time, I got this error:
error: failed retrieving file
for all the mirrors I have uncommented in my /etc/pacman.d/mirrorlist with reasons like "Not found", "File unavailable" or "Service not available".
I've tried several mirrors (all french mirrors and some others) but I got the feeling that it's more coming from my computer.
I first got this error when I tried to install Xorg, but it's the same when I try with someting else (I tried Firefox for instance). Some packages are downloaded but some aren't and so, I can't install anything.
I've checked my internet connexion which seems to work since I have 0% loss when I ping something.
I've also tried pacman -Syy but it didn't fix it.
So, I'm asking for your help, since I never had any problem at this stage of the installation before.
And by the way, I'm running on a VAIO laptop with Arch x86_64 installed via network an I used DHCP during the install.
ThanksI don't think so, since I added nothing after installing. Unless there is a firewall in the hardware (I don't know anything about that). My computer is a Vaio VGN-SR and this morning, I was able to install both cpudyn and acpid on the first try.
And I installed Arch before with the same internet connexion and there was no problem so it must be the computer. -
[Solved] "Failed retrieving file"
Just thought I would share my experience with this, since I didn't happen to find this particular solution on the forum.
For a week I was getting Pacman error messages "failed retrieving file" when trying to install some packages (like mplayer), though I was able to install other packages.
Pacman was returning the same error from multiple mirrors.
But after running the rankmirrors script as described in the "beginners' guide" in the Arch Wiki, I'm able to install the packages.
Maybe this is obvious to more experienced users. As a new user, I very much appreciate all the detailed info on the Arch Wiki, and the forums.
Thanks all!Thanks a lot ;-]
It was just that what I was looking for =þ -
Intermittent pacman errors failed retrieving file
I got most of the way through the Beginners' Guide, but at the part where it has me upgrade the system using pacman I run into trouble. It can't always download the packages. Sometimes it works fine, but many of them return errors before they finish downloading. I always says some variation of "error: failed retrieving file '<filename>' from <mirror> : <reason>" Then it will attempt to finish downloading from another mirror. At the end of the whole thing it says that errors occurred and no packages were upgraded. It doesn't seem to matter what I put in mirrorlist. I've tried the rankmirrors script, Reflector, and picking some that look good from the mirror status page. I can ping the mirrors, so I know that works. my host name is the same in /etc/hosts and /etc/rc.conf. I've looked through the wiki and the forum and haven't found anything that works. I might have missed something, but I've been working on it all day.
If you need me to post any more information let me know.
Thanks,
ProNateitsbrad212 wrote:
Sometimes, refreshing the mirrors with:
pacman -Sy
may resolve some of those errors.
EDIT: Scratch that above suggestion. You could possibly try using one trusted mirror (as stated below). For me, http://archlinux.unixheads.org seems to work quite well, so maybe use that.
I'd recommended only having one selected mirror in /etc/pacman.d/mirrorlist. Although that is most likely unrelated to the issue at hand.
If I just use that mirror it fails to synchronize any databases. -
Failed to update core (no address record)
Hi forum,
I am doing a new installation of arch on my new pc, so i followed the guide on the wiki and all seemed well, so i rebooted and got ready to install my gui, ran pacman -Syy and i get a bunch of errors that look like this:
::Synchronising package databases...
error: failed retrieving file 'core.db' from mirrors.kernel.org : No address record
error: failed retrieving file 'core.db' (repeats with all my other mirrors) : No address record
error: failed to update core (No address record)
error: failed retrieving file 'extra.db' from mirrors.kernel.org : No address record
error: failed retrieving file 'extra.db' (repeats with all my other mirrors : No address record
error: failed to update extra (No address rcord)
error: failed retrieving file 'community.db' from mirrors.kernel.org : No address record
error: blah blah blah all my other mirrors : No address record
error: failed to update community (Guess what? No address record)
error: Failed to synchronise any databases :-(
What have i done wrong? I do have a history of not doing things right and as a consequence have triggered the "bailing out, your on your own, good luck" error multiple times. I suspect i have not configured network properly, im on eth0 like everyone else.
Any help is greatly appreciated, i am anxious to see the sexy-looking kde4 desktop again!
Last edited by JazzPotato (2011-12-24 07:37:30)Hmm.
Do you have a flash drive or anything?
You could always grab netcfg package, install that and try get the net up with that.
www.archlinux.org/packages/core/any/netcfg/download/
and
https://www.archlinux.org/packages/extra/i686/ifplugd/download/
or
https://www.archlinux.org/packages/extra/x86_64/ifplugd/download/
Other then that I have no other ideas, re-install is never the best option really, fight it! -
Pacman failed retrieving *.pkg.tar.xz
I recently discovered that my system was not upgrading because pacman was looking in repositories with older versions of files.
I added this to /etc/pacman.d/mirrorlist
Server = http://archlinux.org/$repo/os/x86_64
Pacman needed upgrading
So I upgraded pacman from 3.3.x to 3.5.4 and updated the database as instructed
Now I sync'd with pacman -Sy
It gave errors about not being able to find core.db and other .db files but appeared to sync the repositories anyways
Now I started seeing lots of packages that needed upgrading, including pacman
So I upgraded with pacman -Su and every file gave an error like the following line but then appeared to download
error: failed retrieving file 'man-db-2.6.0.2-2-x86_64.pkg.tar.xz' from archlinux.org : Not Found
I searched all around but haven't seen anything definitive about these kinds of errors
One suggestion I saw was that this is connected to the pacman database version change
Does anyone know why those errors are happening and how can I fix it?
This is my conf file
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
[archlinuxfr]
Server = http://repo.archlinux.fr/i686You should also use a mirror that actually exists; http://archlinux.org/$repo/os/x86_64 is not correct.
-
Hi,
I have a JNI native library that calls a custom C++ shared library with a number of number of dependencies. At runtime, in the process of loading the custom C++ library, I got the folloing message.
Assertion failed: 0, file ../lnk/exthrow.cc, line 425
Abort (core dumped)
If I did mdb on core dump, the following is the result.
mdb java.29922
mdb: core file data for mapping at ffb7a000 not saved: Bad address
Loading modules: [ libc.so.1 libuutil.so.1 ld.so.1 ]
$Cffbf7c90 libc.so.1`_lwp_kill+8(6, 0, ff2f2e10, ff2a8bd0, ffffffff, 6)
ffbf7cf0 libc.so.1`abort+0x110(ffbf7de0, 1, 0, ad314, ff2f12d8, 0)
ffbf7d80 libc.so.1`_assert+0x64(ff1d9358, ff1d935a, 1a9, ff1ea810, ad030, ff1d418c)
ffbf7fe0 libCrun.so.1`__1cG__CrunMex_rethrow_q6F_v_+0xf0(0, fffb, 0, 14c14, 2, 0)
ffbf8040 libtssclt.so.3`__1cDstdNbasic_istream4Ccn0ALchar_traits4Cc___2t6Mn0AIios_baseJEmptyCtor__v_+0xb8(eef09710, 0,
eef0df94, eef0a088, eef09730, eef09748)
ffbf80a0 libtssclt.so.3`__SLIP.INIT_A+0x20(0, ff2f3700, acb18, ff2bb774, f0bd4840, f0bd4880)
ffbf8100 libtssclt.so.3`__1cU__STATIC_CONSTRUCTOR6F_v_+4(ee774a48, ff2f3700, acb18, ff1d6e50, f0bd3b40, f0bd3b80)
ffbf8160 libtssclt.so.3`_init+0x110(ff3f40fc, ff3f5a50, 2b414, 0, ff3f4910, 821)
ffbf81c0 ld.so.1`call_init+0x16c(c10081, 1, fe9d0f60, ee7c5eb4, ff3f4910, ffdfffff)
ffbf8228 ld.so.1`dlmopen_intn+0x164(ff3f40fc, 10000, c01, 24, 3b, ff161f30)
ffbf8288 ld.so.1`dlmopen_check+0x160(ff3f40fc, 10c5c8, c01, ff3914f8, ffbf834c, 0)
ffbf82e8 ld.so.1`dlopen+0x30(10c5c8, 1, 1, ff185fac, 57c0, ff185fa8)
ffbf8350 libjvm.so`__1cCosIdll_load6Fpkcpci_pv_+0x20(10c5c8, ffbf8858, 400, 0, 12eed4, 5400)
ffbf83f0 libjvm.so`JVM_LoadLibrary+0x15c(10c5c8, 64fc, 38810, ff18696c, ff185fac, 2)
ffbf8c58 libjava.so`Java_java_lang_ClassLoader_00024NativeLibrary_load+0xe8(388cc, ffbf8f2c, ffbf8f28, 0, 10c5c8, 0)
ffbf8dc0 0xf900bc20(11, ffbf8f2c, ffbf8ea8, ffffff80, 64fc, 0)
ffbf8e40 0xf900bbc4(f0c303c0, b6, 0, 8, 1ffc, ffbf8ec0)
ffbf8ec0 0xf9005764(f0c30080, b8, f0c09478, f9014760, f0c374a8, ffbf8f90)
ffbf8f58 0xf90057a8(0, b8, ffbf911c, f9014a20, 110, ffbf9028)
ffbf9018 0xf9005764(f0c08de8, b6, ffbf919c, f9014a68, 57c0, ffbf90c0)
ffbf90b8 0xf9005764(339b8, 0, 64fc, f9014760, ff185fac, ffbf9140)
ffbf9140 0xf9005764(c000, 2, 4c00, f9014a70, ff17fca0, ffbf91b8)
ffbf91b8 0xf9000218(ffbf92a0, ffbf9380, a, f4d5f2f8, f900a7e0, ffbf9390)
ffbf9218 libjvm.so`__1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x5b8(
ffbf9378, 38810, ffbf938c, ffbf92b0, 38eb8, 0)
ffbf92e0 libjvm.so`__1cNinstanceKlassPinitialize_impl6FnTinstanceKlassHandle_pnGThread__v_+0x68c(ffbf9524, 38810, f4d5f330,
391cc, 38eb8, 38eb4)
ffbf94c0 libjvm.so`__1cNinstanceKlassKinitialize6MpnGThread__v_+0x80(38e20, 38810, fecd7a8c, f4d5f330, 38810, ff181fbc)
ffbf9540 libjvm.so`__1cbCfind_class_from_class_loader6FpnHJNIEnv__nMsymbolHandle_CnGHandle_3CpnGThread__pnH_jclass__+0xd8(
388cc, 1, 1, 38e18, f4d5f330, 1)
ffbf95b0 libjvm.so`jni_FindClass+0x720(388cc, 0, 0, ff18696c, 391cc, 0)
ffbf9640 main+0xe3c(6, 388cc, ff182ba0, 39348, 0, 1)
ffbf9ed0 _start+0x108(0, 0, 0, 0, 0, 0)
Any help/assistance on this issue would be highly appriciated.
Thanks and Regards
SomeshI ran into this exact same problem (on Solaris, JVM 1.4.1). Although I don't know the exact cause, I can tell you what I did to fix it..
Of course, this happens when you try to load a native library (a .so in this case). I ldd'd that .so, and found that it in turn was linked to two other libraries in my control, and some other OS libraries.
When I statically linked either one of my libraries, such that only one of the libraries under my control was still linked dynamically, leaving the OS libaries untouched, then the problem went away. Note that it didn't matter which one I linked statically- as long as one (or both) were static there was no problem.
My guess was that there were some sort of cyclic dependencies with these libraries, but right now I'm happy enough that it works, so I'm not going to try and pursue this further.. -
Abs error: core.abs.tar.gz no such file or directory
I am trying to learn how to compile packages on Arch but I am getting a error when I try to run abs:
[root@anyhost ~] # abs
==> Downloading tarballs...
==> core...
tar (child): core.abs.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable. Exiting now.
tar: Child returned status 2
tar: Error is not recoverable exiting now
Any ideas?I think the package format was changed from tar.gz to .xz a while back.Try to re-install abs and also use an updated mirror.
Maybe you are looking for
-
Installing Linux on Yoga Tablet 2 Pro 13" that comes with Android
Hello all, has anyone yet tried to install a Linux distribution on the Tablet 2 Pro 13" to replace the Android it comes with? Does the Android version of this tablet even boot from USB media, or is locked in some way? That tablet with Linux would jus
-
Hello All, We are currently having an issue with our Value Mapping in SAP XI. We have set up Value Mappings in Integration Builder : Configuration and for some reason, some works and some doesn't work. For example, we have set up Value Mapping Scheme
-
Missing Data Target in Infopackage for Update ODS Data in Data Target Cube
Hello & Best Wishes for the New Year to all of you, I have 3 ODS (1 on Full Update and 2 with Delta Updates). All these 3 ODS update data to a single CUBE. In my development system this works correctly. Data load from PSA to ODS to Cube. Now I transp
-
Is it possible to know the %TEMP% environment variable from my program?
I would like to know if my program want to save a file to the temp storage on my PC, how can I know the %TEMP% environment variable in Windows in my program?
-
Why didnt my icloud back up my pictures
I had to restore my phone today & it didnt restore my pictures on icloud..they are very important photo's that i can not get back..please HELP!