Failed Server Connection

When I try to load an email, the following message appears: Cannot get mail/the connection to the server failed. After I click ok , then things work fine until the next time when the process starts over. I have tried resetting , but that hasn't worked. Does anyone gave any suggestions? Thanks...doc

for three days... hmmm.
Find a computer - or use web mail. Go to yahoo.com and try to log into your mail there. If that does not work, then there is something wrong with your passsword. Talk to yahoo (My wife got hijacked last year, and the hikacker change the password. Yahoo got it back, but it took some conversations...)
If it works on web mail, the delete the account from your pad and re enter it. that sort of wakes it up, and has worked for her.
She gets that error every now and then, but it usually goes away oin a few hours. 3 days suggestes there is somethign else going on.

Similar Messages

On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

I have a new install of Windows 2012.  I have two physical servers. One is a W2012 std Domain Controller ("DC"). The Second is configured as W2012 HyperV  ("HV"). Under HV I have
two VMs. One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS"). All systems are behind a firewall appliance. Exchange is working via Outlook and OWA internally and externally. The self
created SSL must be installed manually on external machines since it comes up as an untrusted certificate. Once installed remote outlook works and OWA works. I have configured the terminal server and I am able
to login remotely as various users under my "TS group". The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
for alias@ domain, then fails the logging on to the mail server) The error reads: "Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. The
connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC. I have
tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command. I have also tried to use the guid via "Get-Mailbox
ALIAS | fl name, exchangeguid. Keep in mind all desktop users on the network are connecting to Outlook without issue.
I would appreciate any thoughts on solving this issue.

Hi,
According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
Regards,
Winnie Liang
TechNet Community Support

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Error while connecting to an OData Feed from Excel 2013 PowerPivot . Error: Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported

I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
getting below error
Error message:
Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
============================
Call Stack:
============================
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
   at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
   at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
Appreciate suggestions/answers
NOTE: The error is showing only while using Excel 2013 powerpivot
its working good with Excel 2010 powerpivot

Anita,
Please look into using Power Query to use OData as a source in Power Pivot.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How do I set the "When an OCSP server connection fails, treat the certificate as invalid" in Firefox for Android?

Due to the security concerns from Heartbleed and Steve Gibson's excellent coverage on certification revocation, I have set "When an OCSP server connection fails, treat the certificate as invalid" on my desktop Firefox and now want to do the same on Firefox for Android. I cannot find anything in the settings menu to allow this. Is it done through about:config and if so, what is the setting name there?

hello mcvickerp, in about:config you can switch the setting "security.OCSP.require" to true.

BPEL server connection failed in Integration Server connect

I am creating an 'Integration server' in the JDeveloper.
After furnishing the details (App server name, Host, Port) on testing the connection it gets failed for BPEL process manager server:
Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: OK
The BPEL identity service failed to start because of the error: java.io.FileNotFoundException:http://hostname:8888/integration/services/testconnection/BPELConnection
Any ideas?
thanks in advance.
Bin

Hi Françoise,
I think Application Server Test uses OPMN Port and for testing BPEL and ESB HTTP port is used.
Do you use default 8888 HTTP Port Number? When you create a Integration Server Connection it is default value, but maybe you have installed Oracle Application Server on another http port.
Regards,
J

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

"Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

Hello,
I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
I'm running Windows Server 2008 R2,
Any ideas?

Hi saeedawadx,
Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
The following related article will give more helpful tips,
The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
Trouble Connecting to Cluster Nodes? Check WMI!
http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Adobe Reader won't open pdfs. Message : Fatal Error: Acrobat failed to connect to a DDE server.

What can I do to restore my Adobe Reader to working order. Worked fine yesterday. Today, won't open any pdf docs in Adobe or saved on the computer. Message keeps popping up: Fatal Error: Acrobat failed to connect to a DDE server.

DDE stands for Dynamic Data Exchange, check this threat
http://forums.adobe.com/message/1877300#1877300

Adobe Reader 9.1 - Fatal Error : Acrobat failed to connect a DDE server

Hi Everyone,
I have some users telling me that when they try to open a pdf attachment in Outlook 2007. Nothing happens. The system just sits there as if you did not click on the attachment. If you wait long enought a popup box from adobe reader comes up and says:
Fatal Error
Acrobat failed to connect a DDE server.
All the PDFs are very simple, just simple scanned images or converted over from a document into a PDF.
I've tried repairing the install and still had no luck - same behaviour. The only way the pdf opens is if we go into task manager and close the AcroRd32.exe process or logoff and log back in.
If it helps, the most recent system change was the upgrade to IE7 and a new anti-virus software.
Thanks,
KEvin

No solution I am afraid but same problem, running full version of AVG and problem hit immediately after Adobe Reader 9.1 upgrade. Pretty darn sure problem is in the upgrade but the relevant Restore Point was overwritten before I figured it out. Any advice welcome.

Failed to connect to DDE Server Acrobat XI Pro Windows 8.1

I had installed Acrobat XI Pro on a Windows 8.0 notebook computer and it was working fine. When I upgraded to Windows 8.1 a few months ago, I started getting intermittent problems/error messages when I would try to open a pdf file by doubleclicking on the file either in a folder or on the desktop. The file wouldn't open and the error message was "Failed to connect to DDE Server." I can still open the files by doing a File, Open from inside the software, so it's not an insurmountable problem, just annoying. Any suggestions on how to fix this?

Hi TreeLady ,
Thanks for posting on forums, DDE server was a part of Windows XP, it was removed from Windows Vista and above. However, if you are getting this error in Acrobat, try the following.
(This error occurs when you have more than 1 process of Acrobat running)
1) Go to the task manager by presiing Ctrl+Alt+Del
2) Go to the processes in Task Manager
3) End all processes related to Acrobat
4) Launch Acrobat again.
Also, to find the root couse or to isolate the issue you can try the following.
1) Click on start
2) Type RUN
3) Type MSCONFIG
4) Go to services
5) Hide all Microsoft services
6) Disable all Services (Except Microsoft)
7) Restart your machine
8) Launch Acrobat to check if you get the issue.
This would help us to understand if Acrobat or any other third party process is not allowing Acrobat process to end causing a conflict .
Thanks,
Vikrantt Singh

Running an SQL Server Agent Job to execute a package but the job FAILS on Connections

I have created a package which basically imports data from one database to another, The database where it collects the data from the job is failing on connecting reporting the following message:
Source: ****** Connection manager "Source - *****"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft
OLE DB Provider for SQL Server" Hresult: 0x80040E4D Description: "Login failed for user '*ConnectionONE*'.". End Error Error: 2015-02-18 11:36:04.94     Code: 0xC020801C
Source: Data Flow Task Get Revenue Data [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Source - *****" failed with error
code 0xC0202009.
The package runs fine if executed within the package but fails from the SQL Agent Job.
NB * is to hide confidential data. *ConnectionONE* is the database which the package is attempting to get data from.
Completely puzzled on what to do as i have tried reading other forumns but they dont seem to be helping.
Any Help would be great thankyou!

That is because package is set to "EncryptSensitiveWithUserKey". Please change that to "EncryptSensitiveWithPassword" and the provide password to protect sensitive data.
More information
here.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Publishing error (failed to connect to server)

Using X5, I am trying to publish to our help server (web help
pro), but getting a message in the output window "Warining: Failed
to publish to 'yourserver'. reason: Failed to connect to server.
All my permissions are set up as described here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=rb_e01
So... I ran a packet sniffer and then tried to publish
again... and saw that the publisher attempts to access
http://yourserver/robo/robo.dll?mgr=sys&cmd=svr
When I try to access this address in a browser, I get a 401 error
with the message below.
+----------------------------------------------------------------------------------------- ----
|Server: unauthorized
|Unauthorized due to ACL on resource
|
|This error indicates that the credentials passed by the
client do not have access to the particular resource on the server.
This |resource could be either the page or file listed in the
address line of the client, or it could be another file on the
server that is |needed to process the file listed on the address
line of the client.
|
|Please make a note of the entire address you were trying to
access and then contact the Web server's administrator to verify
|that you have permission to access the requested resource.
+--------------------------------------------------------------------------------------
However, if I try to access that address _on_ the server (
http://localhost/....) I get some
nice XML:
+--------------------------------------------------------------------------
|
|<?xml version="1.0" ?>
|- <mrs xmlns="
http://www.ehelp.com/mrs/xml/serverinfo/">
|- <head>
| <url host="localhost" ip="127.0.0.1" version="4.00.083"
/>
| <publish type="httppost"
script="/robo/bin/WPSHost.dll?PUBLISH" />
| <serverapi url="
http://localhost/RoboAPI.asp"
/>
| <admin url="
http://localhost/robo/Admin/"
/>
| <projects url="
http://localhost/robo/Projects/"
type="httppost" script="/robo/bin/WPSHost.dll?PUBLISH" />
| <documents url="
http://localhost/robo/Documents/"
/>
| <reports url="
http://localhost/robo/Reports/"
/>
| </head>
| </mrs>
+--------------------------------------------------------------------------
I can not seem to figure out what ACL is incorrect. I tried
running process monitor (from winternals), and did not see anything
helpful. The IIS www worker process seems to access all the robo
files/registry without error.
Has anyone else had this problem? Can I get some guidance on
how to resolve? We are about to purchase support incidents, but the
sooner I can resolve, the better.
Any help appreciated. thanks,
ajperrins

I'm afraid I won't be of much help except to say that this is
a classic permissions issue. I have to assume you've checked and
double-checked the link referred to in your post (which is a good
one).
You might also try this technote:
Publishing
to RoboEngine
In helping others troubleshoot this, it sometimes turns out
that there are firewall issues that are not obvious especially if
you are in a large organization crossing many domains from author
to server. Are you the ultimate "server admin" or is there someone
in your organization's network admnistration who could help resolve
the permission issue?
Sorry I can't be of immediate help.
john

SSRS: Failure sending mail: The transport failed to connect to the server.

I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
Jessica

Thank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
  <Application>
   <Name>ReportServerWebService</Name>
   <VirtualDirectory>ReportServer</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
  <Application>
   <Name>ReportManager</Name>
   <VirtualDirectory>Reports</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
</URLReservations>
<Authentication>
  <AuthenticationTypes>
   <RSWindowsNegotiate/>
   <RSWindowsNTLM/>
  </AuthenticationTypes>
  <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
  <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
  <EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
  <IsSchedulingService>True</IsSchedulingService>
  <IsNotificationService>True</IsNotificationService>
  <IsEventService>True</IsEventService>
  <PollingInterval>10</PollingInterval>
  <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
  <MemorySafetyMargin>80</MemorySafetyMargin>
  <MemoryThreshold>90</MemoryThreshold>
  <RecycleTime>720</RecycleTime>
  <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
  <MaxQueueThreads>0</MaxQueueThreads>
  <UrlRoot>http://abraham/Reports</UrlRoot>
  <UnattendedExecutionAccount>
   <UserName></UserName>
   <Password></Password>
   <Domain></Domain>
  </UnattendedExecutionAccount>
  <PolicyLevel>rssrvpolicy.config</PolicyLevel>
  <IsWebServiceEnabled>True</IsWebServiceEnabled>
  <IsReportManagerEnabled>True</IsReportManagerEnabled>
  <FileShareStorageLocation>
   <Path>
   </Path>
  </FileShareStorageLocation>
</Service>
<UI>
  <ReportServerUrl>
  </ReportServerUrl>
  <PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
  <Delivery>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <FileShareConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </FileShareConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <RSEmailDPConfiguration>
      <SMTPServer>192.168.11.210</SMTPServer>
      <SMTPServerPort></SMTPServerPort>
      <SMTPAccountName>
      </SMTPAccountName>
      <SMTPConnectionTimeout>
      </SMTPConnectionTimeout>
      <SMTPServerPickupDirectory>
      </SMTPServerPickupDirectory>
      <SMTPUseSSL>
      </SMTPUseSSL>
      <SendUsing>2</SendUsing>
      <SMTPAuthenticate>
      </SMTPAuthenticate>
      <From>[email protected]</From>
      <EmbeddedRenderFormats>
       <RenderingExtension>MHTML</RenderingExtension>
      </EmbeddedRenderFormats>
      <PrivilegedUserRenderFormats>
      </PrivilegedUserRenderFormats>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
      <SendEmailToUserAlias>True</SendEmailToUserAlias>
      <DefaultHostName>
      </DefaultHostName>
      <PermittedHosts>
      </PermittedHosts>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <DocumentLibraryConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </DocumentLibraryConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
  </Delivery>
  <DeliveryUI>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
    <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
    <Configuration>
     <RSEmailDPConfiguration>
      <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
  </DeliveryUI>
  <Render>
   <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
   <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
   <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
   <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
   <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
   <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
   <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
   <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
  </Render>
  <Data>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
   <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
  </Data>
  <SemanticQuery>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
     <EnableUnistr>False</EnableUnistr>
     <DisableTSTruncation>False</DisableTSTruncation>
    </Configuration>
   </Extension>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
    </Configuration>
   </Extension>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
  </SemanticQuery>
  <ModelGeneration>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
  </ModelGeneration>
  <Security>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
  </Security>
  <Authentication>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
  </Authentication>
  <EventProcessing>
   <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
    <Event>
     <Type>ReportHistorySnapshotCreated</Type>
    </Event>
   </Extension>
   <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
    <Event>
     <Type>TimedSubscription</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
    <Event>
     <Type>RefreshCache</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
    <Event>
     <Type>SnapshotUpdated</Type>
    </Event>
   </Extension>
  </EventProcessing>
</Extensions>
<MapTileServerConfiguration>
  <MaxConnections>2</MaxConnections>
  <Timeout>10</Timeout>
  <AppID>(Default)</AppID>
  <CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration>

MDBs failed to connect to remote JMS server

Hi,
          We currently have 2 clusters: one is a regular cluster (cluster1) and the other is JMS cluster (cluster2). Our JMS server and filestore are targeted to a migratable server in JMS cluster.
          In our weblogic-ejb-jar.xml, we added element <provider-url> to the <message-driven-descriptor> to allow JMS remote connection as follows:
          <weblogic-enterprise-bean>
               <ejb-name>MyBean</ejb-name>
               <message-driven-descriptor>
                    <destination-jndi-name>MyTopic</destination-jndi-name>
          <provider-url>t3://myhost:19009,myhost:19011</provider-url>
          <connection-factory-jndi-name>MyConnectionFactory</connection-factory-jn
          di-name>
               </message-driven-descriptor>
          </weblogic-enterprise-bean>
          When we deployed our application, the Connection Status of MyBean showed "disconnected". I have tried different values (t3://myhost:19009;t3://myhost:19011) and
          (t3://myhost:19009) but got the same result.
          When I re-targeted the JMS server and filestore to a regular server (instead of migratable server), I was able to connect remotely. But because we want to be able to migrate our JMS server (auto and manually), I have to target it to a migratable server.
          I could not figure out why my MDBs failed to connect to a remote JMS server when it is targeted to a migratable server? Is there a restriction that we have to target to a regular server in order to connect remotely or I'm doing something wrong?
          Any help would be greatly appreciated.
          Thanks,
          Thao

I'm using WL9.2 and my migratable server is actually up and running (is that what you mean about booted?).                    I meant checking your log files to make sure that the JMS server itself actually booted, not checking that the host WL server was up. (For example you should see INFO messages indicating that the JMS server has loaded "X" records from its persistent store).
          >>> Could you elaborate on the known problem?
          9.x MDBs have special code for enhanced handling of remote distributed destinations. I'm guessing that this code is somehow causing problems when the remote JMS server is migratable. I don't have enough information to elaborate further than that.
          >>> What else I can try?
          Beyond contacting customer support, I'm not sure.
          Tom

Failed Server Connection

Similar Messages

Maybe you are looking for