Failed Snow Leopard Air remote upgrade left an unwanted volume behind
I bought the Snow Leopard Family Pack to upgrade my iMac and Macbook Air from Leopard to Snow Leopard. The iMac upgraded just fine. Then I set up Air to upgrade from the install disk in the iMac by sharing. It appeared to be working but ended with an error message (don't remember what it was) after well over an hour. Then I remembered an old external USB drive I was lucky to have lying around, and installed Snow Leopard from it just fine. However, the first install attempt left behind a new volume called "Install OS X" that's occupying just over 2 GB. I know ugly things can happen when tinkering with hard drives, so I didn't want to just delete it. What should I do to safely get rid of this thing? Thanks.
If it's a volume, if you drag it and hover it over the trash, the Trash should turn into an Eject icon. If it does, you can safely put it in the Trash. If the Trash stays the Trash when you hover over it with the Install icon, then DON'T DELETE IT YET!!! First, follow my next instructions:
1. Go to the Apple menu in the upper left corner of your screen. It's located on the menu bar.
2. Click on it, and from that menu, go to About This Mac.
3. A window will pop up that will say Mac OS X Version ________.
4. If the version number is 10.6 or 10.6.1, 10.6.2, 10.6.3, then you are okay to drag the install icon to the trash. If the version number is anything with a 10.5, then DON'T delete the Install icon yet.
If you're still running on Leopard (10.5._), you should double-click the Install icon to install Snow Leopard. After the install, do the numbered steps again. You should be running on 10.6 now. Then you can run Software Update to get the latest Snow Leopard update, 10.6.3. If all this doesn't solve your problem, report back here. Whew! That was long.
Hope this helps.
Similar Messages
-
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
Snow Leopard Installation and Upgrade Tips
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Some things to know when planning to upgrade to Snow Leopard:
General Information
• Snow Leopard will only run on a Mac with an Intel processor. It will not run on any Mac with a PowerPC processor. PowerPC-based Macs include all PowerMac G3s, PowerMac G4s and PowerMac G5s, iMac G3s, iMac G4s, iMac G5s, all PowerBooks, all iBooks, and all eMacs. There is no workaround or hack that will get around this issue and get Snow Leopard to install and run on a PowerPC-based Mac.
• An Apple web page with the major enhancements and refinements in Snow Leopard can be found here:
http://www.apple.com/macosx/refinements/enhancements-refinements.html
• An article with a useful summary about Snow Leopard and 64-bit computing can be found here:
http://www.macfixit.com/article.php?story=20090826074252596
Tips
• IMPORTANT: As with any upgrade, you need to confirm compatibility of all your applications and drivers with Snow Leopard before you upgrade. Some major items of note:
Snow Leopard only ships with Java 1.6, so any applications built with Java must include support for 1.6 or the application will fail. Applications that currently use Java and are reported not to work include (but are by no means limited to) SPSS, ClamXav and Cyberduck.
Snow Leopard has severely restricted or in many cases eliminated the use of Input Managers, so applications that depended on those will fail. Logitech's mouse drivers appear to fall into this category.
Many applications that are or include menu bar components will fail if they depend on Unsanity's Menu Extra Enabler or the open-source Menu Cracker.
Apple has a list of software officially stated to be incompatible with Snow Leopard here:
http://support.apple.com/kb/HT3258
There's also an ongoing compatibility list is being maintained here:
http://snowleopard.wikidot.com/
Reports on that site are unofficial but may be useful.
• Snow Leopard no longer includes AppleTalk, so you will no longer be able to use any AppleTalk-only printers or other devices.
• Safari by default will launch in 64-bit mode on those systems that support 64-bit processing (which includes all Macs with Intel Core 2 Duo or Xeon processor). If you have Safari plug-ins that are not working, quit Safari, Get Info on the Safari application, and select "Open in 32-bit mode" and relaunch Safari.
• QuickTime Player X has some ability to trim and convert media, but no longer includes many of the former options available in QuickTime Pro. QuickTime 7 Player is available as an optional installation for those who still need the additional Pro features. If you have QuickTime 7 Pro installed in Leopard and are upgrading, the Snow Leopard installer should install QuickTime 7 Player automatically and preserve your Pro key. Apple has made no mention of a Pro version of QuickTime X.
• The Snow Leopard installer reportedly removes the Script subfolders from /Library/Scripts/, so if you are upgrading Mac OS X 10.5 Leopard, before performing the upgrade make a backup of the Address Book Scripts, Basics, Finder Scripts, Info Scripts, Internet Services, and Navigation Scripts subfolders and then copy them back to /Library/Scripts/ after installing the update.
This is the 1st version of this tip. It was submitted on August 28, 2009 by Dave Sawyer.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Welcome to the Apple Support Communities
As the computer froze during the Snow Leopard installation, it's possible that Snow Leopard wasn't installed correctly and Snow Leopard can't start, so you have to reinstall Snow Leopard. To do it, insert the Snow Leopard disc, hold the C key while your computer is starting and follow the steps to reinstall Snow Leopard. You won't lose anything you had saved -
I have a mac book pro with ocx snow leopard I wont upgrade to what?
I have a mac book pro with osx snow leopard I wont upgrade to what?
OS X Mountain Lion system requirements
To install Mountain Lion, you need one of these Macs:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space -
I'm running on Mac OS X 10.5.8. Do I need to buy snow leopard first before upgrading to Mountain Lion?
Make sure your machine meets the minimum system requirements:
http://www.apple.com/osx/specs/
Although it says 2 GB RAM is the minimum, it's generally recommended to have at least 4 GB unless you only use your machine for "light" use (no movie editing/burning, etc). -
I have a imac 10.6.8 with snow leopard. Just upgraded to iphoto 11 Now my computer keeps freezing up mostly if my iphone is connected. It even freezes in safari. Can i get my money back and unistall
This forum is for people to discuss issues with other users. Apple aren't here. No one here can give you your money back. So, contact the the App Store support, if that's where you bought it. There's a link on the right hand side of the App Store window.
Regards
TD -
I bought my Macbook pro in 2010 and had Snow Leopard which I upgraded when Mountain Lion was available. Now it keeps saying Mavarick is available. Is that another update? Or is that something else?
Mavericks is an upgraded System in the same way that Mountain Lion was, the difference being that it's free. You can download the installer from the Mac App Store (the system requirements are the same as for Mountain Lion so you should be OK there). I've not got it: reports suggest that it is an improvement over Mountain Lion but it has some quirks that may or may not be an issue for you. It has its own forum, so you could look there for information.
-
Rephrase..Have 2009 iMac running snow leopard should I upgrade to Mavericks
Rephrase..Have 2009 iMac running snow leopard should I upgrade to Mavericks
If your machine meets the specs, the latest is Yosemite; make sure you check all the requirements as your machine falls right at the back end of being supported - meaning that it will not run at its maximum speed due to an older processor. You'd also need an absolute minimum opf 4 GB RAM - 8 would be much better.
-
How do I get iTunes to show up so I can make playlists and burn CD's as I was able to do in MAC OS X Snow Leopard? I upgraded to MAVERICKS so that I could have iCloud capabilities.
Hi ...
Help here > iTunes 11 for Mac: Create a playlist -
Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect.
No problems when i used with Snow Leopard. I upgraded: Now Kreonika is not happy. Not happy at all!In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you? -
My macbook came with snow leopard, if I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second time ?
At this point, you can no longer download Lion (10.7) from the App Store, only Mountain Lion (10.8) - make sure all your applications are fully compatible if you decide to upgrade.
Yes, you can restore 10.6 using your restore disc should you wish to - and the App Store (not ITunes) will have a record of all your purchases, since it's linked to your AppleId.
Matt -
I have a macbook that the O.S. is 10.5.8 and I cannot update it or buy Snow leopard or Lion upgrades..any suggestions
http://store.apple.com/us/product/MC573Z/A for SL retail disks.
Once SL is intalled from retail disks the combo installer should be found to update it to 10.6.8, which install App Store to download Lion.
Is your computer Intel (required for SL)? If intel is it Core2Duo (required for Lion)?
Go to Apple menu > About This Mac > Processor entry ... -
I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?
Your machine likely can't handle Mountain Lion 10.8 nor 10.7, if it does it will run slow and very higly likely a lot of your third party software and drivers for printers and scanners won't function anymore.
It's because your 10.5 era (or earlier) machine is rather dated, hardware has advanced and is faster, the newer OS X versions have gotten bloated.
I do recommend you call Apple via phone and order the 10.6.3 white retail disks, backup your personal data off the 10.5.8 Mac to a external storage drive and when the disk arrives, stick it in and run the upgrade installer.
Once that's finished, reboot and use Software Update to get to 10.6.8 and stay there. You can buy stuff from AppStore, just don't upgrade to 10.8 (or 10.7) as thats when you'll have issues.
10.6 should run your currrently installed PPC software and hardware drivers. But 10.7/10.8 will not.
10.6 is receiving security and other updates from Apple as more than 50% of OSX users are still on it.
Most commonly used backup methods
Things to consider before upgrading OS X -
I have a new iMac. Can I install my iWork from my Snow Leopard set and upgrade it or will I need to buy new iWork? If so why?
cherylfrommiami wrote:
I paid for the cd set when my last computer needed an upgrade. I just want to use iWork on my new computer OSX10.8
As Niel states you can use your current iWorks.
If you want the latest version you will need to purchase the componets in the Mac App Store.
Maybe you are looking for
-
Trying to network my MacBook Pro to my desktop PC, getting error -36...
Title explains the problem. I can network wirelessly to my Dell laptop fine, but not the desktop. What's going on? Is there some particular setting on the XP desktop that I'm missing? I've got the firewall turned off, and have tried every input I can
-
How to display value in memory
How to display value in memory, except call function 'LIST_FROM_MEMORY' . Thanks.
-
Hello Scripters, I need to find a specific character style in my document then process its content and replace it with the processed content. How can i make a loop so that it process all of the instances of that style? To make the picture clearer, le
-
Curve 9300 connecting to boot rom problem
Hi everyone, I have a curve 9300 and I tried to install an update to the OS. The problem is when i get to the part that says "connecting to the boot rom" the phone starts rebooting and goes like this 3 or 4 times, resulting on a failed update. I alre
-
Delete PDF files and recent history
How to delete recent history?