Failed software update returns error code 0x87D00668

We are using Secunia CSI to create and publish 3rd party software update packages to SCCM 2012.  I have one client computer running Windows 7 Pro x64 that is having a problem with one update.  When the user tries to install the Adobe Reader update
in Software Center it fails and returns the following error.
The software change returned error code 0x87D00668(-2016410008).
I haven't been able to find any information on this error code.  I was just wondering if anyone else has encountered this error and might have any information on it??

The item it's referring to in that error would seem to be the task that can't be found. No?
The issue that needs to be addressed is that the updates aren't needed - they are installed on the server. I've installed the updates manually, rebooted, Software Center should not even be reporting that the updates need to be installed.  And back to
the second post above, "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed.  The question is then, why is it still "actionable"?
Thanks
Why do you think that they are not needed? Have you force CM to scan again for SU? Are they show as being applied in CM12? What does the Windowsupdate.log say about that SU?
I don't think it is a task that can't be found based on that single line from the log file.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
I don't think the updates are needed because they are installed on the server. You will see in my above posts my reasoning for concluding that the updates are installed: "I have two security updates that are indeed installed (according to Windows Update,
the Windows Update log, and Add/remove programs), yet Software Center shows "failed" and with that exact same error of "Software update still detected as actionable after being applied".
Yes, I've forced multiple rescans (before and after reinstalling the client) over the course of a few days. Software Center still shows failed.
The Windows update log shows that it installed successfully. Here's one of lines in the log for one of the updates (in fact as far as the log goes back, 7-3, it's been saying this):
WindowsUpdate    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows
XP x86 (KB2729450)
I think, again, we're back to the fact that is is installed but the issue is: "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed.  The question is why is it still
"actionable"?  The client sees that it's installed but ... why is it saying it's still "actionable"? 
I realize that this issue might be a little tougher to track down since I couldn't find ANY other reference to it online.
Lastly, Config Manager shows "failed to install update" which is exactly what Software Center reports.
Thanks again, am happy to upload/copy/paste any logs you think would be helpful.

Similar Messages

  • Help with updates - The software change returned error code 0x87D00215(-2016411115).

    I have rolled out bunch of updates across few hundred workstation systems.
    Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
    Looking at one of the workstations, I can see 5 updates are pending download at 0%.
    Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
    rebooting the workstations few times.
    (I have also tried to use Windows Update and install one of these manually, which worked.)

    Investigating this further, I have found the following in CAS.log:
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

  • The software change returned error code 0x87D0128F (-2016406897)

    Hi all,
    We are currently using Admin Studio 2013 to create App-V applications (which in turn uses the Microsoft App-V 5.0 Sequencer running through AAC).  I have noticed that the last few applications that have been sequenced, when deployed via SCCM 2012 have
    the following error:
    The software change returned error code 0x87D0128F (-2016406897)
    Now, we have tested these applications on a vanilla Windows 7 SP1 OS using the AppVLauncher and the application launches as expected.  The issue seems to be with the app deployment.  I have read a couple of articles about this (slim picking) and
    one suggested the shortcut could have an extra space at the start.  This is not the case for my apps.  Also the other suggestion is changing the Enable Scripting registry key, but again this did not work.
    Has anyone else seen this problem and have a solution?
    Ta

    Thanks for replying Torsten,
    This is the error log I get.  Not quite sure how to diagnose the issue:
       + CategoryInfo          : InvalidResult: (:) [Add-AppvClientPackage], Clie 
       ntException
        + FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP 
       owerShell.AddAppvPackage
    ]LOG]!><time="16:16:49.418+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appexcnlib.cpp:441">
    <![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
     -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="16:16:49.419+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:128">
    <![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="16:16:49.420+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:154">
    <![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="16:16:49.421+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvmanage5x.cpp:86">
    <![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="16:16:49.422+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appv5xhandler.cpp:646">
    <![LOG[++++++ App enforcement completed (5 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="16:16:49.427+00"
    date="11-19-2013" component="AppEnforce" context="" type="1" thread="2532" file="appprovider.cpp:2366">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="17:10:13.543+00" date="11-19-2013" component="AppEnforce" context="" type="1" thread="4828" file="appvpackagequery5x.cpp:177">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.192+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.259+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
    <![LOG[+++ Starting Install enforcement for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" ApplicationDeliveryType - ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision - 1, ContentPath - C:\WINDOWS\ccmcache\y,
    Execution Context - Any]LOG]!><time="10:46:37.834+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:1643">
    <![LOG[    A user is logged on to the system.]LOG]!><time="10:46:37.916+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2014">
    <![LOG[    Performing detection of app deployment type 00031_SolidWorks_eDrawings_2014_EN_R01(ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, revision 1) for system.]LOG]!><time="10:46:37.927+00"
    date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2079">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:38.236+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2280" file="appvpackagequery5x.cpp:177">
    <![LOG[    Installing App-V 5.X package 00031_SolidWorks_eDrawings_2014_EN_R01 (DTId = ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision = 1)]LOG]!><time="10:46:38.245+00" date="11-20-2013"
    component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:422">
    <![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer | Remove-AppVPublishingServer
    ] for the  machine]LOG]!><time="10:46:38.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
    <![LOG[    Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer
    | Remove-AppVPublishingServer  with system context]LOG]!><time="10:46:38.247+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
    <![LOG[    Process 4356 terminated with exitcode: 0]LOG]!><time="10:46:43.218+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
    <![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:46:43.219+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvclientconfig5x.cpp:64">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:43.245+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
    <![LOG[Package: 00031_SolidWorks_eDrawings_2014_EN_R01 with version GUID {7013821C-844B-46E4-B3DB-380B65BF93CF} is not installed. Will install it]LOG]!><time="10:46:43.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500"
    file="appv5xhandler.cpp:459">
    <![LOG[Configure the package 00031_SolidWorks_eDrawings_2014_EN_R01 as download and execute]LOG]!><time="10:46:43.249+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:468">
    <![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage -Path
    'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'  -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] for the  machine]LOG]!><time="10:46:43.255+00" date="11-20-2013"
    component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
    <![LOG[    Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage
    -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'  -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml' with system context]LOG]!><time="10:46:43.256+00" date="11-20-2013"
    component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
    <![LOG[    Process 4120 terminated with exitcode: 1]LOG]!><time="10:46:45.438+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
    <![LOG[Here is the error message generated by the process:
    Add-AppvClientPackage : XML document could not be loaded because it is 
    invalid. Please supply a valid XML document. Please consult AppV Client Event 
    Log for more details.
    Operation attempted: Configure AppV Package. 
    AppV Error Code: 050009000A. 
    Please consult AppV Client Event Log for more details.
    At line:1 char:106
    + import-module 'C:\Program Files\Microsoft Application 
    Virtualization\Client\Appv ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~
        + CategoryInfo          : InvalidResult: (:) [Add-AppvClientPackage], Clie 
       ntException
        + FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP 
       owerShell.AddAppvPackage
    ]LOG]!><time="10:46:45.442+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appexcnlib.cpp:441">
    <![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
     -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="10:46:45.443+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:128">
    <![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:46:45.444+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:154">
    <![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:46:45.445+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvmanage5x.cpp:86">
    <![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:46:45.446+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appv5xhandler.cpp:646">
    <![LOG[++++++ App enforcement completed (7 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="10:46:45.450+00"
    date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2366">
    Just to add to this I have also managed to install the application from the downloaded content from SCCM.  By that I mean I go into the cached folder and run the app-v launcher, load and install the application and it works correctly.  Therefore
    it must be something to do with the launch command through SCCM?

  • Creative Cloud desktop failed to update.(Error code: 1)

    Hello, I'm running a MacBook Pro Retina with Yosemite 10.10.2.  I tried to update Creative Cloud Desktop manager and then tried to cancel it (it was killing my bandwidth while I was trying to work).  It disappeared from the bar at the top of the OSx screen.
    I couldn't get it back.  I restarted my machine.  When I clicked on Creative Cloud this time, I was prompted to update, but almost immediately got an error.  There are other mentions of Error Code 1 on the forum, but they appear to be first time installations, not updates.  Suggestions welcome!  Thanks
    Creative Cloud desktop failed to update.(Error code: 1)
    Update:
    Still no success.  I tried the instructions here: Error "Failed to Install" Creative Cloud Desktop application  which says to uninstall Creative Cloud.  I got an error: "Unable to uninstall Creative Cloud Desktop.  Quit Creative Cloud desktop and try again."  But CC desktop is not running.  I had a look in activity monitor and didn't see anything.

    Okay - I think I resolved this by closing some stalled processes in Activity Monitor, then restarting Creative Cloud desktop, then updating in the normal way. 

  • I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

    I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

    Meresianak73703965 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application to reinstall the Creative Cloud Desktop application?

  • Updating Creative Cloud desktop app "failed to update.(Error code: 50)"

    I'm attempting to update my Creative Cloud desktop app, but I keep getting this message "failed to update.(Error code: 50)".  Any ideas on how I can complete the update?  I'm using Win7 pro.

    Clemaster83 please try utilizing the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to update the Creative Cloud Desktop application.

  • Im getting a message saying "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support." Anyone know how to fix?

    I got this message when I tried to update CC on my PC. Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support
    Anyone know how to help

    Kbw1223 please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve the current error.

  • I'M GETTING Creative Cloud desktop failed to update.(Error code: 50)

    Creative cloud is not auto updating. I get Creative Cloud desktop failed to update.(Error code: 50)

    rickh143
    Are you on Windows computer, if yes.
    End All Adobe background processes from task manager and then try to update , processes like Acrotray
    You may also refer
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).

    Deployment to the client is successful but the error reported within Clients "SCCM Software Center"  
    The software change returned error code 0x87D00324(-2016410844).
    Also States on "Status" Past Due - Will be Retired"
    Can't figure this one out and I did some googling with no success in finding a solution?
    I am running an Adobe Flash install (.EXE)
    Any help or direction would be greatly appreciated
    RF

    Hi,
    Thank you for your response
    ""Wow6432Node is not valid on x86 systems."""
    Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
    When I first created the detection method I had only created the "WoW" Check
    for Flash value in the reg, which was running against both x86 & x64 Win 7
    systems, and forgot to include the x64 check/, either case, the error appeared
    on the WOW check. Presently I have 2 "Detection Clauses" one for x86
    and the second clause is x64 ( non WOW Path), and still receive the same erorrs
    on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
    Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
    located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
    """"Also, why use the default value? I doubt there's anything in there (the default value is the
    value display in a key in regedit with the name of
    "@").""""<o:p></o:p>
    When Default Value is selected the boxes/options below that allow for more detailed
    information to be entered when performing the "reg check"? This is
    where I had been able to enter specific Build/Version to look for, Flash
    11.4.402.265, so that if it does not discover the build # it will proceed with
    the install.....<o:p></o:p>
    I figured having the option to check for Build/Version # would omit SCCM reinstalling on
    systems that have build 11.4.402.265 already?<o:p></o:p>
    From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
    x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
    entries and the true x64 reg entries in both locations when installing.
    Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
    Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success]  all others { / In Progresss / Error /Unknown } has no info......
    If this helps provide further details.....
    Thanks
    Regards,
    Ron
    RF

  • The software change returned error code 0x87D00607(-2016410105).

    Hi to everyone. I am learning SCCM 2012 R2 using book Mastering SCCM 2012 R2 in addition to various video trainings and online resources. Currently I am focused on application deployment. I created Foxit Reader application - msi deployment type, distributed
    it to DP and deployed it to device collection containing only one test computer (Win 7 Pro SP1 x64). Having done all these steps I went to client's Software Center and Application Catalog. Foxit Reader app is visible but as soon as I click on Install
    button I receive an error:
    The software change returned error code 0x87D00607(-2016410105).
    I deployed Office 2013 a few days ago (although I am struggling to uninstall it silently) without problems. Meanwhile I did not change anything related to boundaries, boundary groups and DPs. I have only one SCCM 2012 R2 server (Primary stand-alone site).
    I hate these situations when I follow along some official learning material such as this book, doing everything the same as it is done there and it does not work at all.
    Unfortunately I can not afford official MS training, my company does not invest in their system engineers so we are on our own. It is nice to learn something by yourself but situations like this take too much time - probably on official training it would be
    solved immediately.

    Its likely that your problem is being caused by incorrectly configured boundaries with Configuration Manager. There are quite a few blogs on this particular error, as an example:
    http://www.vmadmin.co.uk/microsoft/64-mssystemcenter/350-sccm2012errorboundary87d00607
    and
    http://peerk.blogspot.com.au/2013/01/sccm-2012-app-stuck-at-downloading-0.html
    or
    http://heineborn.com/tech/application-installation-error-0x87d00607/
    Take a look at your boundaries and make sure that you have one configured relative to the location of the Distribution Point that the client is trying to download content from.
    Cheers
    Damon

  • Software Updates Synchronization, error code 0X80131500

    Hello,
    I need some help to get the Software Updates Synchronization to work again.
    Some days ago the Software Updates Synchronization ended to work, with the error code 0X80131500.
    (I have cleaned out, and now only test with updates for Skype and Windows 8, normally we only use the Software Updates for third-party updates via Secunia CSI)
    In SMS_WSUS_SYNC_MANAGER, you will see the following error:
     WSUS Synchronization failed.
     Message: Failed to sync some of the updates.
     Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates.
    If I check the log wsyncmgr.log, I sees the following:
    Wakeup by inbox drop SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:18 10496 (0x2900)
    Found local sync request file SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Starting Sync SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Performing sync on local request SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Read SUPs from SCF for stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
    10496 (0x2900)
    Found 1 SUPs SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Found active SUP stocm.OURDOMAIN.local from SCF File.
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
    10496 (0x2900)
    STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:31:23.766 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
    10496 (0x2900)
    Synchronizing WSUS server stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    10496 (0x2900)
    STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:31:25.025 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    10496 (0x2900)
    Using account SODERBERGPARTN\SCCMLocalAdmin to connect to WSUS Server
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    10496 (0x2900)
    Synchronizing WSUS server stocm.OURDOMAIN.local ...
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    11696 (0x2DB0)
    sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:25 11696 (0x2DB0)
    sync: WSUS synchronizing categories SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:31 11696 (0x2DB0)
    Done synchronizing WSUS Server stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:33
    11696 (0x2DB0)
    Sleeping 2 more minutes for WSUS server sync results to become available
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:33
    11696 (0x2DB0)
    Set content version of update source {A0A0CEF9-7800-4617-A320-D74A9E7BEB37} for site SOP to 589
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    Synchronizing SMS database with WSUS server stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    STATMSG: ID=6705 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:33:34.319 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    Using account SODERBERGPARTN\SCCMLocalAdmin to connect to WSUS Server
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    Synchronizing SMS database with WSUS server stocm.OURDOMAIN.local ...
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    sync: Starting SMS database synchronization
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    requested localization languages: en,sv SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:34 10160 (0x27B0)
    Syncing all updates SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:34 10160 (0x27B0)
    Requested categories: Product=Windows 8, ProductFamily=Skype, UpdateClassification=Security Updates, UpdateClassification=Update Rollups, UpdateClassification=Service Packs, UpdateClassification=Tools, UpdateClassification=Feature Packs, UpdateClassification=Updates,
    UpdateClassification=Definition Updates, UpdateClassification=Critical Updates
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    sync: SMS synchronizing categories SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:34 10160 (0x27B0)
    sync: SMS synchronizing categories, processed 0 out of 214 items (0%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    sync: SMS synchronizing categories, processed 214 out of 214 items (100%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:36
    10160 (0x27B0)
    sync: SMS synchronizing categories, processed 214 out of 214 items (100%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:36
    10160 (0x27B0)
    sync: SMS synchronizing updates SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:36 10160 (0x27B0)
    sync: SMS synchronizing updates, processed 0 out of 32 items (0%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:38
    10160 (0x27B0)
    Synchronizing update 2489efa5-a44c-4157-9f65-db2cc4c272d7 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 (KB2833959)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:38
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="1"><FileContent Name="windows8-rt-kb2833959-x86.cab" Size="6429955" Signed="true" Hash="A37A1D40B0581FDC6EC0E5FB1DC04EE84AD7FC52"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833959-x86_a37a1d40b0581fdc6ec0e5fb1dc04ee84ad7fc52.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:6c9323cb-22d6-4bdb-8309-9ed6ded8bce2"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
    10160 (0x27B0)
    Failed to sync update 2489efa5-a44c-4157-9f65-db2cc4c272d7. Error: Failed to save update 6c9323cb-22d6-4bdb-8309-9ed6ded8bce2. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
    10160 (0x27B0)
    Synchronizing update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2832418)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="203"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="203"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="1"><FileContent Name="windows8-rt-kb2832418-x64.cab" Size="6031583" Signed="true" Hash="5527FCE8AC04F289CFBAF42619CA25648577012F"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2832418-x64_5527fce8ac04f289cfbaf42619ca25648577012f.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:0a75ed46-8be8-416d-8899-68dc6aea56e5"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Failed to sync update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409. Error: Failed to save update 0a75ed46-8be8-416d-8899-68dc6aea56e5. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Synchronizing update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d - Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2833959)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_393a2161-b85d-439e-9038-7fc7befaeed0" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="393a2161-b85d-439e-9038-7fc7befaeed0" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="393a2161-b85d-439e-9038-7fc7befaeed0" Version="1"><FileContent Name="windows8-rt-kb2833959-x64.cab" Size="11789251" Signed="true" Hash="8150A8E8BD5CC80D396C628BD55E94A8BA2DC0B4"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833959-x64_8150a8e8bd5cc80d396c628bd55e94a8ba2dc0b4.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:393a2161-b85d-439e-9038-7fc7befaeed0"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Failed to sync update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d. Error: Failed to save update 393a2161-b85d-439e-9038-7fc7befaeed0. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Synchronizing update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 x86 (KB2832418)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_0979de90-24e7-46e7-862f-febf7a8a6348" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="0979de90-24e7-46e7-862f-febf7a8a6348" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="0979de90-24e7-46e7-862f-febf7a8a6348" Version="1"><FileContent Name="windows8-rt-kb2832418-x86.cab" Size="4313255" Signed="true" Hash="485B6961AC836D2D6C047D4A63299D98C4B44542"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2832418-x86_485b6961ac836d2d6c047d4a63299d98c4b44542.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:0979de90-24e7-46e7-862f-febf7a8a6348"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
    10160 (0x27B0)
    Failed to sync update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309. Error: Failed to save update 0979de90-24e7-46e7-862f-febf7a8a6348. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
    10160 (0x27B0)
    Synchronizing update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d - Security Update for Microsoft .NET Framework 4.5 on Windows 8 (KB2833958)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_a8891461-32fe-450f-8585-1b5ffbd91788" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="a8891461-32fe-450f-8585-1b5ffbd91788" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="a8891461-32fe-450f-8585-1b5ffbd91788" Version="1"><FileContent Name="windows8-rt-kb2833958-x86.cab" Size="7255481" Signed="true" Hash="F88D2B25DC19094E48A3AF0D34202CE6861E4644"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833958-x86_f88d2b25dc19094e48a3af0d34202ce6861e4644.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:a8891461-32fe-450f-8585-1b5ffbd91788"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d. Error: Failed to save update a8891461-32fe-450f-8585-1b5ffbd91788. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Too many consecutive failures. Aborting sync.
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Sync failures summary: SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:49 10160 (0x27B0)
    Failed to sync update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409. Error: Failed to save update 0a75ed46-8be8-416d-8899-68dc6aea56e5. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d. Error: Failed to save update a8891461-32fe-450f-8585-1b5ffbd91788. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309. Error: Failed to save update 0979de90-24e7-46e7-862f-febf7a8a6348. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d. Error: Failed to save update 393a2161-b85d-439e-9038-7fc7befaeed0. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 2489efa5-a44c-4157-9f65-db2cc4c272d7. Error: Failed to save update 6c9323cb-22d6-4bdb-8309-9ed6ded8bce2. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10496 (0x2900)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:33:49.449 2013 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
    ISTR1="Failed to sync some of the updates" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10496 (0x2900)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:49 10496 (0x2900)
    Setting sync alert to active state on site SOP
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10496 (0x2900)
    Sync time: 0d00h02m25s SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:49 10496 (0x2900)
    Environment:
    Windows Server 2008 R2 (fully updated)
    System Center Configuration Manager 2012 SP1 CU2
    SQL Server 2008 (fully updated)
    wsyncmgr.log are here: http://sdrv.ms/1bBxYRj
      

    I observed a similar error in a topology that had a CAS and 2 primary child sites.  The CAS seemed to update without issue, but the primary server reported 0X80131500.  I was not able to locate the SMSSQLCLR
    node in any of the 3 site databases.  It appears that some updates worked but at 10% it failed:
    In my case, I restarted the child site SUP and forced sync on the CAS again.  It seems to be doing better now.  This might have just been an intermittent error...
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • RemoteApp and Desktop Connections update returns Error code: 0x80070003

    I had RemoteApp and Desktop Connections working in Windows 7, but it recently started returning the following event log error.
    An error occurred. Contact your workplace administrator for assistance.
    Connection name: My Apps
    Connection URL: https://<externalfqdn>/RDWeb/Feed/webfeed.aspx
    Error code: 0x80070003, 0x0
    How do I troubleshoot this?  When I enter
    https://<externalfqdn>/RDWeb/Feed/webfeed.aspx, I am prompted for a user name and password.  When I enter the user name and password, a string of characters is returned.  Is there a way to decode these characters?  The only unusual
    element of my install is that the <externalfqdn> is different than the windows FQDN.  Both point to the same IP address.  I'm not seeing any event log errors on the server.  If I delete the existing RemoteApp connection, recreation of
    the connection fails and no event is logged on the server OR the client.

    @Raymond Thanks for your reply!  I made the configuration changes you suggested and attempted to logged 3 different activities.
    1. On a client, enter
    https://<externalfqdn-removed>/RDWeb/Feed/webfeed.aspx into "Set up a new connection with RemoteApp and Desktop Connections" and click Next.  I received the error message, "An error occurred. Contact your workplace administrator for assistance." 
    Nothing was logged in C:\inetpub\logs\LogFiles\W3SVC1\*.log or C:\Windows\Web\RDWeb\App_Data\RDWeb.log.
    2. On a client, enter
    https://<externalfqdn-removed>/RDWeb/Feed/webfeed.aspx into Internet Explorer 9.  An encrypted security ticket is returned.  Nothing was logged in C:\Windows\Web\RDWeb\App_Data\RDWeb.log.  The following was logged in C:\inetpub\logs\LogFiles\W3SVC1\*.log.
    2011-09-08 18:42:39 192.168.0.124 GET /RDWeb/FeedLogin/WebFeedlogin.aspx ReturnUrl=%2fRDWeb%2fFeed%2fwebfeed.aspx 443 - <clientip-removed> Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 401 2 5 94
    2011-09-08 18:42:39 192.168.0.124 GET /RDWeb/Feed/webfeed.aspx - 443 - <clientip-removed> Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 302 0 0 288
    2011-09-08 18:42:39 192.168.0.124 GET /RDWeb/FeedLogin/WebFeedlogin.aspx ReturnUrl=%2fRDWeb%2fFeed%2fwebfeed.aspx 443 <domain-removed>\<user-removed> <clientip-removed> Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 200 0 0 300
    3. On a client, enter
    https://<externalfqdn-removed>/RDWeb/ into Internet Explorer 9, login, and start an RemoteApp application.  The following was logged in C:\inetpub\logs\LogFiles\W3SVC1\*.log.
    2011-09-08 18:22:37 192.168.0.124 POST /RDWeb/Pages/en-US/login.aspx - 443 <domain-removed>\<user-removed> <clientip-removed> Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 302 0 0 343
    2011-09-08 18:22:42 192.168.0.124 GET /RDWeb/Pages/en-US/default.aspx - 443 <domain-removed>\<user-removed> <clientip-removed> Mozilla/5.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+WOW64;+Trident/5.0) 200 0 0 5959
    The following was logged in C:\Windows\Web\RDWeb\App_Data\RDWeb.log.
    2011/09/08 13:22:36 [Verbose] SecurityDescriptorPtr is not NULL.
    2011/09/08 13:22:36 [Verbose] Page Requested : login.aspx, Request Type : POST.
    2011/09/08 13:22:36 [Info] ExtractInfoFromForm returning : True.
    2011/09/08 13:22:36 [Info] CreateClientSideCookieInResponse - DomainUserName : <domain-removed>\<user-removed>.
    2011/09/08 13:22:36 [Info] CreateClientSideCookieInResponse - WorkspaceId : <externalfqdn-removed>.
    2011/09/08 13:22:36 [Info] CreateClientSideCookieInResponse - objHttpContext.Response.Cookies[strTSWAAuthClientSideCookie].Value : Name=<domain-removed>%5C<user-removed>&MachineType=private&WorkSpaceID=<externalfqdn-removed>.
    2011/09/08 13:22:36 [Info] Info from Form or Auth Cookie extracted : True.
    2011/09/08 13:22:36 [Info] User Name : <user-removed>, DomainName : <domain-removed>, Password : Non-NullOrEmpty, Private logon : True, LogonUser returned : True.
    2011/09/08 13:22:36 [Info] objWindowsIdentity.Name : <domain-removed>\<user-removed>, objWindowsIdentity.User : S-1-5-21-515967899-1364589140-725345543-1146.
    2011/09/08 13:22:36 [Info] objWindowsBuiltInRole : Administrator.
    2011/09/08 13:22:36 [Info] CheckTSWAAdministratorAccess returned : True.
    2011/09/08 13:22:36 [Info] SetupHttpContextUser returning : True.
    2011/09/08 13:22:36 [Verbose] RDWebAccessConfigPath : C:\Windows\Web\RDWeb\App_Data\RDWebAccess.Config.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'ID' has '<externalfqdn-removed>' value.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'Name' has 'HL Apps' value.
    2011/09/08 13:22:36 [Verbose] Workspace ID : HL Apps
    2011/09/08 13:22:36 [Verbose] Workspace Name : HL Apps
    2011/09/08 13:22:36 [Verbose] RDWebAccessConfigPath : C:\Windows\Web\RDWeb\App_Data\RDWebAccess.Config.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerName : <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] Thread 10 Calling constructor
    2011/09/08 13:22:36 [Verbose] Thread 10 Total of 1 specified Terminal Servers.
    2011/09/08 13:22:36 [Verbose] Thread 10 0. Terminal Server: <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] RDWebAccessConfigPath : C:\Windows\Web\RDWeb\App_Data\RDWebAccess.Config.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'ID' has '<externalfqdn-removed>' value.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'Name' has 'HL Apps' value.
    2011/09/08 13:22:36 [Verbose] Workspace ID : HL Apps
    2011/09/08 13:22:36 [Verbose] Workspace Name : HL Apps
    2011/09/08 13:22:36 [Verbose] Thread 10 Setting up access check.
    2011/09/08 13:22:36 [Verbose] Thread 10 Exiting constructor
    2011/09/08 13:22:36 [Verbose] Got Rdp Certificate from cache
    2011/09/08 13:22:36 [Verbose] GetRdpSigningCertificateHash returning : 84847B2B52291C737211302419B6697E45F400F9
    2011/09/08 13:22:36 [Error] Windows Group : TS Web Access Administrators already exisits.
    2011/09/08 13:22:36 [Error] Windows Builtin Role : Administrator already exisits.
    2011/09/08 13:22:36 [Verbose] SecurityDescriptorPtr is not NULL.
    2011/09/08 13:22:36 [Verbose] Page Requested : default.aspx, Request Type : GET.
    2011/09/08 13:22:36 [Info] objFormsAuthenticationTicket.Name : DomainUserName=<domain-removed>\<user-removed>&TSWAAdministratorAccess=True.
    2011/09/08 13:22:36 [Info] DomainUserName : <domain-removed>\<user-removed>.
    2011/09/08 13:22:36 [Info] TswaAdministratorAccess : True.
    2011/09/08 13:22:36 [Info] UserSid : S-1-5-21-515967899-1364589140-725345543-1146.
    2011/09/08 13:22:36 [Info] ExtractInfoFromCookies returning : True.
    2011/09/08 13:22:36 [Info] Info from Form or Auth Cookie extracted : True.
    2011/09/08 13:22:36 [Info] SetupHttpContextUser returning : True.
    2011/09/08 13:22:36 [Verbose] RDWebAccessConfigPath : C:\Windows\Web\RDWeb\App_Data\RDWebAccess.Config.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'ID' has '<externalfqdn-removed>' value.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'Name' has 'HL Apps' value.
    2011/09/08 13:22:36 [Verbose] Workspace ID : HL Apps
    2011/09/08 13:22:36 [Verbose] Workspace Name : HL Apps
    2011/09/08 13:22:36 [Verbose] RDWebAccessConfigPath : C:\Windows\Web\RDWeb\App_Data\RDWebAccess.Config.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] objRDWebAccessConfig.IsRADCMServer : False.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerName : <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] objRDWebAccessConfig.webFeedServerName : <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] UseCPUB : False.
    2011/09/08 13:22:36 [Verbose] TSServerName : localhost.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerName : <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] Sharepoint assembly not found:Could not load file or assembly 'Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.
    2011/09/08 13:22:36 [Verbose] ASP.NET location:/RDWeb/Pages
    2011/09/08 13:22:36 [Verbose] Saving icon to:C:\Windows\Web\RDWeb\Pages\images\rapwait.gif
    2011/09/08 13:22:36 [Verbose] Saving icon to:C:\Windows\Web\RDWeb\Pages\images\erroricon.png
    2011/09/08 13:22:36 [Verbose] Saving xsl to:C:\Windows\Web\RDWeb\Pages\images\RapApplicationsPart.xsl
    2011/09/08 13:22:36 [Verbose] UseCPUB : False.
    2011/09/08 13:22:36 [Verbose] TSServerName : <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] UserSid : S-1-5-21-515967899-1364589140-725345543-1146.
    2011/09/08 13:22:36 [Verbose] Thread 10 Calling constructor
    2011/09/08 13:22:36 [Verbose] Thread 10 Total of 1 specified Terminal Servers.
    2011/09/08 13:22:36 [Verbose] Thread 10 0. Terminal Server: <internalserver-removed>.
    2011/09/08 13:22:36 [Verbose] RDWebAccessConfigPath : C:\Windows\Web\RDWeb\App_Data\RDWebAccess.Config.
    2011/09/08 13:22:36 [Verbose] WebFeed ServerType : rdserver.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'ID' has '<externalfqdn-removed>' value.
    2011/09/08 13:22:36 [Verbose] Workspace attribute 'Name' has 'HL Apps' value.
    2011/09/08 13:22:36 [Verbose] Workspace ID : HL Apps
    2011/09/08 13:22:36 [Verbose] Workspace Name : HL Apps
    2011/09/08 13:22:36 [Verbose] Thread 10 Setting up access check.
    2011/09/08 13:22:36 [Verbose] Thread 10 Exiting constructor
    2011/09/08 13:22:36 [Verbose] Getting Fresh Gateway Info
    2011/09/08 13:22:36 [Verbose] GatewayName:<externalfqdn-removed>
    2011/09/08 13:22:36 [Verbose] GatewayUsage:1
    2011/09/08 13:22:36 [Verbose] GatewayAuthMode:4
    2011/09/08 13:22:36 [Verbose] GatewayUseCachedCreds:True
    2011/09/08 13:22:36 [Verbose] Thread 10 Stopping Event Watchers...
    2011/09/08 13:22:36 [Verbose] Setting up WMI Eventwatchers with the following identity: IIS APPPOOL\RDWebAccess
    2011/09/08 13:22:36 [Verbose] Setting up WMI Eventwatchers SID: S-1-5-82-604604840-3341247844-1790606609-4006251754-2470522317
    2011/09/08 13:22:36 [Verbose] Setting up WMI Eventwatchers Owner: S-1-5-82-604604840-3341247844-1790606609-4006251754-2470522317
    2011/09/08 13:22:36 [Verbose] Setting up WMI Eventwatchers Token: 2384
    2011/09/08 13:22:36 [Verbose] Thread 10 Attempting to setup watcher for: <internalserver-removed>
    2011/09/08 13:22:36 [Verbose] Thread 10 Succeeded setting up event watcher for: <internalserver-removed>
    2011/09/08 13:22:37 [Info] Received 39 apps from <internalserver-removed>
    2011/09/08 13:22:37 [Info] Received 1 desktops from <internalserver-removed>

  • Creative Cloud desktop failed to update.(Error code: 1) Contact Customer Support

    Not sure what this means, but how do I fix this to continue installing updates?

    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • 42%  Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

    Any answers for this?

    Error 50 https://forums.adobe.com/thread/1432237 may help
    or
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Creative Cloud desktop failed to update.(Error code: 50)

    Help to resolve

    Hi Marcel,
    In addition to Jeff's suggestion, you may also refer to the thread below:
    What is CC update Error Code 50?
    Regards,
    Sheena

Maybe you are looking for

  • A New but Persistent Lag issue in FCP6 and OS X 10.5

    I have Final Cut Studio 2 installed on an iMac 2.8Ghz (Intel) and a MacBook Pro 2.33 (1st Gen Intel). I have successfully run FCP6 on both these computer for 2 years on projects ranging from SD to Uncompressed HD. I have never had a lag issue. But re

  • Business Objects in vmware cluster very slow

    Post Author: aboorkuma CA Forum: Administration Hi I recently move the BO From standalone server to Cluster in vmwrae users are facing problem when accessing the reports , some times page cannot displayed or timeout coming now it is very very slow wh

  • IPhoto11 and iBooks problem

    I used iPhoto11 to make an album. Then saved it as a pdf file so that I could view it on my iPad. I moved the pdf file to the Books folder in iTunes and then did a sync with my iPad. The album is on the shelf but you can not open it ? Any albums that

  • IPhoto seems to have lost photo resolution for some photos

    I recently upgrade to iPhoto8. I have set of photos in 2006 which now have only about 50KB file size. It is if they are thumbnails, not the orignal photos whose file size was 500KB to + 1MB etc. I noticed that in my orignals folder I sometimes have m

  • Multiple video tracks available???

    I am gradually moving over to FCE from Media100. In one of my earlier post on this forum, I wrote that I need to work on several (4-5) timelines at the same time in one project. I edit documentary work and need this flexibility in developing ideas an