Failed Status: 5.0.0 (permanent failure)Remote-MTA: dns; [15.201.224.75] Diagnostic-Code: smtp; 5.3.

Reporting-MTA: dns; smtp03.bis7.eu.blackberry.com Final-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 (permanent failure)Remote-MTA: dns; [15.201.224.75] Diagnostic-Code: smtp; 5.3.0 - Other mail system problem 550-'5.7.1 Command rejected' (delivery attempts: 0)
What dones it mean ? It worked once (pictures from my Blackberry to the HP Photosmart Premium printer via e-print), but since yesterday no. Why ? Help please
Frédéric Kiener
[Personal Information Removed]

Hi,
Check whether your Instance is up if not bring up the instance first. Try to logon to instance with DDIC user and reset the password to standard i.e 19920706.
Re-try the installation.
--Kishore

Similar Messages

Sendmail with remote-mta problem

Hello,
I am relatively new to Solaris (I come from a Linux background).
I inherited a Solaris 8 server running sendmail, with a remote MTA. When sending mails internally, everything is fine. However, sending to any other email (including personal ones that I know exist) I see messages like the below.
Is this a problem on my end, or on the remote-MTAs end?
barracuda is the remote MTA.
The original message was received at Mon, 22 Oct 2007 21:48:04 -0500 (CDT)
from root@localhost
----- The following addresses had permanent fatal errors -----
[email protected]
(reason: 550 No such domain at this location ([email protected]))
----- Transcript of session follows -----
... while talking to barracuda.uwp.edu.:
RCPT To:<[email protected]>
<<< 550 No such domain at this location ([email protected])
550 5.1.1 [email protected].. User unknown
[ Part 2: "Delivery Status" ]
Reporting-MTA: dns; bioinformatics.uwp.edu
Arrival-Date: Mon, 22 Oct 2007 21:48:04 -0500 (CDT)
Final-Recipient: RFC822; [email protected]
Action: failed
Status: 5.1.1
Remote-MTA: DNS; barracuda.uwp.edu
Diagnostic-Code: SMTP; 550 No such domain at this location ([email protected])
Last-Attempt-Date: Mon, 22 Oct 2007 21:51:51 -0500 (CDT)
[ Part 3: "Included Message" ]
Date: Mon, 22 Oct 2007 21:48:04 -0500 (CDT)
From: Super-User <root>
hey
Edited by: WTwomey on Oct 22, 2007 8:18 PM
Edited by: WTwomey on Oct 22, 2007 8:21 PM

Pinging the boxes are not a problem besides I can remotely login to the MSSQL server without a problem. It is accepting a TCP connection but does not function correctly because it will not run the jobs and has troubles whenever I click on any other functions thru the Studio Management. It is not accepting Named Pipe connections locally on the box and throws the 298 error types. It refuses any connections locally but accepts a TCP connection remotely but does not allow any jobs to run and does not function properly using the Studio Management. I think something must be causing the SQL server to refuse any more connections is my guess, but what??

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))

For the past couple of days I have been getting the following alert on my tape backups:
Cannot verify tape data.
The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
It has completed the backup but I get this error when performing a verify or when I try and restore.
This error only occurs on the same server we backup in the protection group. The other 5 servers backup fine.
We are using DPM 2010 (3.0.8195.0)

Same here.
When I came back from vacation I found the same error in our DPM 2012.
The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
I cannot find anything in the eventlog saying that the tapelibrary has been offline.
How can I check that?
Last nights tape-job went "almost" well, one server (VM) still has this error. (But I dont know if that depends on the fact that it had status "Missing" in hyper-v manager due to a Win-update shutdown on a host that had a misconfiguration (auto-reebot).)
I rebooted the DPM-server this morning and then I tried to manually run all tapejobs again but they get this status again.
I do not understand this error and why it suddenly appears to work again for a scheduled job but not when I trigger the job manually.
Is there not a solution for this?
/Anders

I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

when running nltest commands getting the following errors are generated.
C:\Users\Administrator>nltest.exe /sc_query:chickbuns.com
I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
C:\Users\Administrator>nltest.exe /dclist:chickbuns.com
Get list of DCs in domain 'chickbuns.com' from '\\DC1.chickbuns.com'.
DC1.chickbuns.com [PDC] [DS] Site: Default-First-Site-Name
The command completed successfully
C:\Users\Administrator>nltest /dcname:chickbuns.com
NetGetDCName failed: Status = 2453 0x995 NERR_DCNotFound
C:\Users\Administrator>nltest /domain_trusts
List of domain trusts: 0: CHICKBUNS chickbuns.com (NT 5) (Forest Tree Root) (Primary Domain) (Native)
The command completed successfully
C:\Users\Administrator>nltest /dsquerydns
Flags: 0
Connection Status = 0 0x0 NERR_Success
There was no failure in the last update for all DC-specific DNS records
The command completed successfully
C:\Users\Administrator>nltest.exe /server:ad.chickbuns.com /sc_query:chickbuns.com
I_NetLogonControl failed: Status = 1722 0x6ba RPC_S_SERVER_UNAVAILABLE
C:\Users\Administrator>nltest /dsgetfti:chickbuns.com
Geting forest trust information failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

Hi,
>>C:\Users\Administrator>nltest.exe /dclist:chickbuns.com
Get list of DCs in domain 'chickbuns.com' from '\\DC1.chickbuns.com'.
DC1.chickbuns.com [PDC]
[DS] Site: Default-First-Site-Name
This tells me that you ran the command on the PDC.
>>C:\Users\Administrator>nltest.exe /sc_query:chickbuns.com
I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
As far as I know, if we run this command on PDC, this is an expected behavior.
>>C:\Users\Administrator>nltest /dsgetfti:chickbuns.com
Geting forest trust information failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
Nltest can test and reset the secure channel that the NetLogon service establishes between clients and the domain controller that logs them on. Clients using Kerberos authentication
cannot use this secure channel.
In fact, I have run the first and last commands you posted. On my PDC, the first command returned the same message with yours, but on my another DC (not PDC), the command
completed successfully. However, the last command returned the same message with yours on my both DCs(I use Kerberos authentication), which reads:
Geting forest trust information failed….
In addition, the following threads and article can be referred to for more information.
ERROR_NO_SUCH_DOMAIN on PDC Emulator role / Windows Server 2008
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ef00cffe-f568-4ca7-967a-cb1eb9838520/errornosuchdomain-on-pdc-emulator-role-windows-server-2008?forum=winserverDS
ERROR_NO_SUCH_DOMAIN
http://social.technet.microsoft.com/Forums/windowsserver/en-US/1e7e90fe-189f-4379-a344-f070c0aa41c5/errornosuchdomain?forum=winserverDS
Nltest
http://technet.microsoft.com/en-us/library/cc731935.aspx
Best regards,
Frank Shen

The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))

Hello,
We are getting the following error when trying to backup our fileserver (DPM 2012 R2) to tape.
"The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))"
What is interesting:
- The "Short-Term Protection" to disk runs successfully without error
- The "Long-Term Protection" to tape fails after writing ~2TB of data to a TL2000 tape loader. (Always appears to fail towards end of job with the above error)
- In the past (until roughly a month ago) the tape portion of this job was completing successfully.
The DPM logs fail to give much information around the time of error regarding any failures. Likewise windows event logs give no hint of a problem when the job fails.
Looking for any ideas that may help resolve this.
Cheers!

Hi
Has it just started happening? What rollup version are you on currently?

Critical WebLogicServer BEA-000362 Server failed. Reason: [Management:141266]Parsing Failure in config.xml: java.lang.AssertionError: java.lang.reflect.InvocationTargetException

Friends,
Getting below error when i restart the server.
<Dec 31, 2014 5:33:58 AM EST> <Warning> <Management> <BEA-141274> <Production mode has specified at the command line via the weblogic.ProductionModeEnabled system property. This system property overrides the development mode setting contained in config.xml. However, the console and WLST show the attribute values and defaults that correspond to the development mode specified in config.xml.>
<Dec 31, 2014 5:34:07 AM EST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: [Management:141266]Parsing Failure in config.xml: java.lang.AssertionError: java.lang.reflect.InvocationTargetException>
<Dec 31, 2014 5:34:07 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Dec 31, 2014 5:34:07 AM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Dec 31, 2014 5:34:07 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
I have changed the jar files path in build.properties file as its required to import new jars as part of Documentum server upgradation. But getting above errors.. Do i have to update Config.xml file or any other file.. Please suggest.

You've got a problem with a corrupted config.xml file.
Since you did not make any changes you can copy the config.xml.booted file over the corrupted config.xml.
The other option is to walk though the config.xml file and look for the problem...

The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079))

Recently we got this error, while backup to tape, and no idea what is it.
What cause of this error?
The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079)
DPM 2010 with latest roll-up (KB2250444) | DELL Server R710 (Windows 2008 R2 SP1) RAM: 24GB PF: 36-60GB | DELL TL2000 (2 Drives) | And still struggling and monitoring... :(

Hi,
Try this workaround, increase the TcpMaxDataRetransmissions to 10 or more.
How to modify the TCP/IP maximum retransmission timeout
http://support.microsoft.com/kb/170359
Diagnostic steps when "Semaphore timeout" is hit during network transfer:
1. Check if the protected server (sender) or DPM (receiver) was under stress or inaccessible during the time of failure – from event logs from both the machines. Retry should work if the packet loss was because of either of the servers being inaccessible
or under stress for a period.
2. Check if the network between the PS and the DPM is flaky – retransmit count from ‘netstat –s’ or perfmon counters can give an idea.
3. Else contact network support engineer to diagnose the packet loss issue – netmon captures from both machines, packet route and network layout/devices will be required to start the investigation.
4. Take some performance monitor logs on both DPM and Proteted server side.
Some good and basic perfmon counters to take to see if the servers are under stress are below.
Logical Disk/Physical Disk
\%idle
• 100% idle to 50% idle = Healthy
• 49% idle to 20% idle = Warning or Monitor
• 19% idle to 0% idle = Critical or Out of Spec
\%Avg. Disk Sec Read or Write
• .001ms to .015ms = Healthy
• .015ms to .025 = Warning or Monitor
• .026ms or greater = Critical or Out of Spec
Current Disk Queue Length (for all instances)
80 requests for more than 6 minutes.
• Indicates possibly excessive disk queue length.
Memory
\Pool Non Paged Bytes*
• Less that 60% of pool consumed=Healthy
• 61% - 80% of pool consumed = Warning or Monitor.
• Greater than 80% pool consumed = Critical or Out of Spec.
\Pool Paged Bytes*
• Less that 60% of pool consumed=Healthy
• 61% - 80% of pool consumed = Warning or Monitor.
• Greater than 80% pool consumed = Critical or Out of Spec.
\Available Megabytes
• 50% of free memory available or more =Healthy
• 25% of free memory available = Monitor.
• 10% of free memory available = Warning
• Less than 100MB or 5% of free memory available = Critical or Out of Spec.
Processor
\%Processor Time (all instances)
• Less than 60% consumed = Healthy
• 51% - 90% consumed = Monitor or Caution
91% - 100% consumed = Critical
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))

I keep getting the following error when trying to run a backup:
The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))
Any resolution to this issue is greatly appreciated. Thank you.

Hi
First we Need some more Informations.
What are you trying to Backup?
Has it worked before?
Are there any Errors on the Agent Tab?
Are there any Errors on the affectet Server in the Event Log?
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Fix Business Role / Technical Role assignment in Pending or Failed status

Hi,
We are facing issues with few users where Business role assignment or technical role assignment is going into Pending or failed status.
None of the jobs are failing or throwing any error related with the changes.
We are running IdM 7.2 version with SP8.
Is there a way to fix this issue other than removing and reassigning or recreating ID.
Regards,
Manish

Hi Manish,
If technical role (priv) in failed status, please check Tero's reply in the below post. You can set a periodic job to read users and privs in failed status and use uRetryPrivilegeAdd() function to retry the assignment.
Failed AD privileges
I was able to find a document on how to set up the periodic job.
Retry failed assignments (Privilege)
You should try searching the forum and wiki for answers. Most of the issues are addressed by our community experts already. Thanks.
Kind regards,
Jai
Message was edited by: Jai Suryan

Local disks are in FAIL status after installing the cluster

The /var/adm/messages log isn't giving me much info to go on. This has happened twice now. After installing the cluster, my local disks are in a FAIL status and the cluster is not giving me much information why.
It's a two-node cluster w/ x2100 M2s.
Any ideas?
-Hedo

when I run cldevice status -v, it reports that the two local disks are in FAIL status on each node.
That's all that's going on right now. Everything else seems to be perfect, other then those disks in FAIL status.
== from /var/adm/messages ==
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d12s0 has changed to FAILED
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d11s0 has changed to FAILED
-hedo.

Can the sequence pass/fail status be controlled in Test Stand?

I have a sequence that contains a DoWhile loop. Within the loop are 5 or 6 steps that are executed. If the result of those steps is a fail the loop runs again until it passes or meets its allowable number of iterations. My problem is that if an iteration fails and then passes the result for the sequence is failed. Can the pass/fail status be controlled via an expression etc? I know I can create a subsequence and loop in it with the properties. I am just curious to know if there is a way it can be done like I have explained.
Thanks in advance for any help,
Troy

Troy,
You might be able to use the RunState.ThisContext.SequenceFailed property. Set this equal to False after your loop runs, and the sequence should report as if it passed.
John B.
Applications Engineer
National Instruments

Installation Error DW050: Adobe Illustrator CS5.1: failed due to language pack installation failure

I recently got a macbook Air and needed to reinstall my adobe creative suite to said new computer. I purchased creative suite online so I downloaded it from there and followed the installation instructions to a T.
I originally purchased Adobe Creative Suite in 2011 so it is version CS5.1
Everything installed successfully except Adobe Illustrator, which at the end left me this error message
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
how can I get illustrator on my computer?!
Hoping to sell my previous computer soon and I'm almost done transferring programs and photographs.
Thanks so much!

Which language is the application?
Which language is your system?
Which system?

Deployments going to failed status on re-start

Hi ,
In my production instance there are 10 ear files deployed . There is a admin and 2 managed servers. Admin and MS1 is on one box and MS2 is on another box.
When ever i stop MS1 , MS2 , Admin then start Admin , MS1 and MS2 all the deployments goes to failed status . To make the deployments active i have to update each manually .
Please help me with this situation. Every restart is consuming 5 hours of my time. Appreciate your help.
Thanks
Laiju Joseph

Hi,
No, i am not following any order .
I checked wls logs but couldn't find anything concrete

NAC AGENT WEB Your Login session Failed { status = 5 }

Hi,
I have a problem with NAC agent web, did someone seen this error before ?
Your Login session Failed { status = 5 }
I tested all these following , and all are Ok :
• Test using another browser, Firefox for example
• Test using another operating syste
• Check if there any restrictions between the user vlan and nac vlans
Thnx

Hi.
Can you paste all the ACLs on your switch especially the webauth redirect ACL which should deny traffic towards the PSN.
regards
Zubair

Failed Status: 5.0.0 (permanent failure)Remote-MTA: dns; [15.201.224.75] Diagnostic-Code: smtp; 5.3.

Similar Messages

Maybe you are looking for