Failed sync messages turning CCMS to red
Hi gurus,
Logging for sync messages is on in my PI system, so I can monitor them in SXMB_MONI. I had a few failed sync messages, they turn my CCMS status to red but as they cannot be restarted or canceled, I cannot get my CCMS to green status again.
How I can I overcome this problem?
Hi,
You can complete alerts manually to make status green.
CCMS->Open Alerts-> [select node] ->Complete Alerts->[select all messages] Complete alerts.
If you dig further you can also find program to complete alert which can be scheduled.
regards,
Gourav
Similar Messages
-
Turning off logging for failed sync messages too
HI,
I was looking if we can turn off the looging of sync messages even if the message has failed
if someone knows how to do that please let me knwo.
Regards
NikhilHi, Nikhil,
By default the logging / saving up of Synch messages in the Database of XI is turned off. This is done to save memory space. But, if needed they can be truned on and the parameter LOGGING_SYNC is used for that.
Likewise Trace_Level is used to set the trace level of your messages in MONI. If tace_level is 3 all steps are logged in MONI and this fills up the DB drastically. it should be used only for debugging purposes to understand the error / issue better.
Trace_LEVEL should be set to 1 on a production system to make sure only limited logging of messages / steps happens in MONI.
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
if found worth pls do the req
Thanx
Sampath -
Using idisk ... failed sync .... BZ2_bzRead
i keep getting a failed sync message on both my macbook pro and mac pro. Doesn't matter if it's manual or auto... it just wont sync. These are both brand new macs that came preinstalled with osx leopard 10.5.2.
I checked the log file and saw this:
[2008/03/04 03:55:12.156] Starting manual sync of "nameofaccount_iDisk".
[2008/03/04 03:55:16.041] EXCEPTION: BZ2_bzRead (Unexpected EOF)
[2008/03/04 03:55:16.043] Peer ".Mac" is unable to sync. Not enough peers will be available to continue syncing.
[2008/03/04 03:55:16.043] Aborting sync of "nameofaccount_iDisk".
[2008/03/04 03:55:16.710] Sync of "nameofaccount_iDisk" encountered errors. (BZ2_bzRead (Unexpected EOF))
[2008/03/04 03:55:16.711] Last successful sync completed at (null).
[2008/03/04 03:55:16.711] Finished sync of "nameofaccount_iDisk".
what going on with this?Try going into System Preferences->.Mac->Sync->Advanced and clicking "Reset Sync Data" and see if that helps. You could also try clicking the "Sign Out" button in the Account section of the .Mac pref pane. Restart. Then go back into System Preferences->.Mac and re-enter your .Mac info and see if that works. Other then that, I have no clue.
Good luck... -
Just in the last month I've been getting a failed syncing message in iSync with my T610. Previously for the past 2 years things have worked flawlessly.
This is the error I'm getting:
The connection was lost while sending some changes to the device.
Device "Johns T610" synchronization failed
Any help in troubleshooting this would be greatly appreciated.
Thanks
John
Powermac Dual 2.5 Mac OS X (10.4.5)John & lawrence.
Working with the same configuration, and have no
problems encountered so far.
Some ideas:
1. Perhaps wel known, but after your systemupdates
did you run "repair permissions" ?
2. Also are your systems regularly running the
maintenance (Cron) routines. These empty caches and
logs. You can have this done my keeping your system
up and running overnight or by forcing the routines
with terminal commands or some free/shareware apps.
3. What are you syncing adresses and/or iCal ? What
happens if you sync only one.
I am thinking (if 1 & 2 don't work out) that one of
your files is corrupted.
HtH
Ben
I have repaired permissions several times a week from the install disc.
I admittedly have started putting it to sleep many (though not all) nights. I'll leave it on tonight. I am syncing only iCal, not address book
I have also run Disk Warrrior and re-paired the phone.
Most recent console log shows
"Mac OS X Version 10.4.5 (Build 8H14)
2006-03-14 10:57:49 +0000
2006-03-14 10:57:52.167 SystemUIServer[99] lang is:en
Mar 14 10:57:52 localhost 1261568000: cupsd's bootstrap server port not found
2006-03-14 10:57:54.599 iChatAgent[119] WARNING: AbstractService loginIfAvailable: SCNetworkCheckReachabilityByName failed!
2006-03-14 10:57:54.698 iChatAgent[119] WARNING: SubNetService: Could not start up for some reason!
Mar 14 10:57:57 G5-iMAC 1261568000: cupsd's bootstrap server port not found
Mar 14 10:58:02 G5-iMAC 1261568000: cupsd's bootstrap server port not found
Mar 14 10:58:07 G5-iMAC 1261568000: cupsd's bootstrap server port not found
2006-03-14 10:58:38.098 Skype[117] Trying to log in with credentials
Bluetooth Device Info Summary:
svc/maj/min class: 656 / 2 / 1
manufacturer:
SONY ERICSSON
model number:
AAB-1021011-BV
revision ID:
R1L013 CXC125566EU2
IMSI:
+CGATT: 1
GMM:
T610 series
GMI:
Sony Ericsson
2006-03-14 11:02:12.672 iSync[282] AYLogger: Logging WARNINGs
2006-03-14 11:02:12.672 iSync[282] AYLogger: Logging IMPORTANTs
2006-03-14 11:02:12.672 iSync[282] AYLogger: Logging INFOs
2006-03-14 11:02:44.085 SyncServer[258] AYLogger: Logging WARNINGs
2006-03-14 11:02:44.085 SyncServer[258] AYLogger: Logging INFOs
2006-03-14 11:03:40.466 iSync[282] SyncServices precondition failure in [ISyncConcreteSession clientRefusedChangesForRecordWithIdentifier:]: I know nothing about a record with identifier 41C4C460-DE8A-45C5-81C1-490D531BB477. Are you sure you got it from this session or from the session's snapshot? If so, perhaps it has been deleted?
11:03:40.467 [iSync:282] ERROR (.sync.ConduitManager): . Exception catch: [ISyncConcreteSession clientRefusedChangesForRecordWithIdentifier:]: I know nothing about a record with identifier 41C4C460-DE8A-45C5-81C1-490D531BB477. Are you sure you got it from this session or from the session's snapshot? If so, perhaps it has been deleted?
[iSync] we receive the end of our sync plan our sync plan"
Finally, I tried, im desperation, resetting the device. Same result except this time the phone calendar had been completely erased.
G5 iMAC
G5 iMAC -
Continuous CCMS alerts on failed synchronous messages
Hello,
We have failed synchronous messages in our PI system and get a CCMS u201CMessage age alertsu201D every hour. I canu2019t make it stop without disabling monitoring which I donu2019t want to do. The messages can not be deleted or canceled so I get this alert every hour. When I try to cancel the message in SXMB_MONI I get this message:
You cannot cancel XML message 001E0BC80F681EE09FB5DB3E37C38A21 with this status/type
Message no. XMS_ADM108
Diagnosis
You tried to exit an XML message.
System Response
However, you can only exit XML messages that were closed incorrectly.
What can I do to get rid of these old messages? Note: I am a Basis guy so donu2019t have deep XI knowledge and our XI guy is busy with production issues right now. Any help is greatly appreciated.
DavidI think I found it. I needed to schedule the delete job SAP_BC_XMB_DELETE_100 in SXMB_ADMIN. This deleted the old failed messages which should clear things up.
-
How to turn off failed sync notices for firefox
I'm tired of the popups for the failed sync errors. How do I turn them off? I still want sync on, just no error notifications.
This solved my question
-
i have an IPhone 5 and am getting an error message that reads
Connection Unsuccessful. Make sure SYNC is turned on and in range.
My bluetooth is on and I don't know where to turn SYNC onUnpair your phone, then re-pair accd'g to Ford Sync instructions.
-
Sync messages failed due to high load
Hi!
On our test system we had a very high load of async messages for 3 - 4 hours. The async messages were processed successfully but all sync messages failed during this time frame! As soon as the high load of async messages stopped, the sync messages started executing successfully again.
Has anybody also experienced this kind of problem and what can be done to avoid this issue? Thanks for any input and suggestions.
Regards, Tanjahey Tanja,
i had a similar issue when testing the box with Load runner, that a simple sync scenario fails when the size of payload or attachment is high, the thing that i did is just increased the virtual memory ,
You can also check the trace files to figure out problem ?
This might not be a definitive answer , hope this helps,
Vara
[PLEASE REWARD FOR POSTING] -
I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up with a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square, acts like it's downloading (which I can see happening in iTunes), but never downloads. The Cloud just stays there.
I've sync'd my phone, I've turned it to "show all music" in Settings, I've drag and dropped the songs/albums onto my phone again. I feel like I've tried everything I've seen recommended, but nothing works.
I've purchased a lot of music from iTunes. It should be there. What's going on?
P.S. Same thing happening with my purchased books. Ugh.Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.
-
I have a 6 week old 4s running 5.1.1. Started recieving "failed sim" message yesterday. this leaves me with no cell service. Shutting down and turning back own seems to alleviate problem temporarily. It has happened three times now. Help.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
Sony BRAVIA Call failed error message
I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??
Shorty wrote:
Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
Skype on my phone works better, with better video and sound quality. That's where I'm at.....
Maybe I'm on a downer tonight... -
Hi
Our user used to be able to change the categories in a shared outlook calendar appointment but is now getting the error:
The Operation failed the messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
We have tried re-creating the mail profile but still get the same error.
If anyone has any other suggestions, that would be great, thanks.Glad to hear that it works fine in new profile. It seems your old OST file or other file in profile is corrupted. After you create a new profile, Outlook would re-sync your mailbox to a totally new OST as the data file.
Tony Chen
TechNet Community Support -
Centro + Exchange: There was a problem syncing messages
I followed the instructions on this page: http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=116,E=0000000000145083804,K=5545,Sxi=18,Case=Obj(45113) and I'm having issues connecting. We use OWA and I can access that page from my phone and log in, but I get an error. I assume the error is just because the page is too large for the phone to load. I know the email address and password are right as I've entered them serveral times and tried multiple accounts. If I have SSL on and hit the test I get the error: Error connecting to server. Please check youre network or server settings and re-sync. If I turn SSL off I get the error: There was a problem syncing messages. If I put in what I know to be the wrong address with SSL off I get the Error connecting to server message, so I think I'm atleast getting the phone to see the server.
After some messing around, I managed to get a new error: ssl error no trusted root update ca list. After googing that, I found the PalmCertificatesTool and uploaded the certificate to the phone. Now I get the "Error connecting to server. Please check youre network or server settings and re-sync." error again with SSL enabled. With SSL off, I get: Did not let you make a connection. Please check your password and network security settings then retry.
So that tells me it's at least seeing the server, but there's some kind of issue with SSL... Any ideas?
New activity log error:
Error
Errorconnecting to server. Please check your network or server settings and re-sync.
Initialization
email: sync
connection establishment
disconnected
error 006D:1860:2011
Message Edited by Kayden on 11-12-2008 03:29 PM
This question was solved.
View Solution.Yeah, that certainly will make troubleshooting difficult. If you have your own account on the server but no actual phone to work with, you can do as I did - grab the Centro simulator from Palm. Go to the following site and register as a developer: https://pdnet.palm.com/wps/portal/pdnet/developers
Grab the Sprint Centro simulator, install. In the right-click menu, Settings, communications: toggle all netlib calls to host TCP/IP and you will have connectivity.
Set it up as if it were an actual handheld and you can test your email w/o needing the boss' wife's centro.
Hope this helps get things moving so we can get error codes and proceed.
If you have trouble with the simulator, you can post over here: http://forums.palm.com/palm/board/message?board.id=support_downloads&thread.id=7566 to keep that in its own thread.
edit - Or were you asking for more detailed Versamail setup information than that found here: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=44998
Post relates to: Centro (Sprint)
Message Edited by Imaginos on 11-11-2008 07:58 AM -
Group messaging turns to mms when I don't want it to
I was wondering is there a reason that my group messaging turns into MMS even thought I don't want it is there a reason for this.
Ah, more phantoms - or perhaps vampires since they are sucking your data. At the foot of a recent discussion, I set-out a procedure that might help - just ignore the syncing parts as they won't apply to you:
http://discussions.apple.com/thread.jspa?threadID=330512&tstart=0 -
Backup Assistant Service Failed - Sync state not supported by this operation
I have a Samsung Stratosphere running Gingerbread 2.3.5. Recently I tried to use the Backup Assistant app and it gave me the error message:
Service Failed
Sync state not supported by this operation
How do I get it to work again? I can't think of anything that could have caused this. It worked when I first got the phone.I clicked on "backup my contacts" and they backed up--I see them. Here is
the strange thing: the first person to get back to me told me to disable
the app since it didn't work well with Android. I did that. Two days
later, it started to back up. Huh????? Seems like it is inconsistent.
So, do I just wait until it doesn't work again (dumb question--what else
can I do???). Does this happen to others?
Thanks so much. I am new to Verizon and so far I am pleased and really
like that you got back to me!!
Sincerely,
Fran
On Wed, Nov 21, 2012 at 6:10 PM, Frances Purcell-Abbott <
Maybe you are looking for
-
I recieved an ipod 5 for a early christmas present a day ago, I already owned an ipod 4 so i just used my info from that ipod as a back up for my 5g. but now when i try to download music from itunes it says i must use my security questions (which i m
-
Problems + Itunes no longer works
Hello, I recently used a system optimization tool because my system in running pretty slow. It worked somewhat, but now I am having problems in other area that previously were just fine. For instance, whenever (since the optimization) I open iTunes,
-
Line item display for Internal Order
Hi All, What is the transaction code for Internal Order line item display. Thanks, Misbah
-
Order by ignored if report has 2 groups in 1 query
My report has order by &p_q1_order that allows the user to select the order of the report at runtime either by Business Name or by Applicator Name. The order by was working fine with only one group in the query. I have since had to add new fields(app
-
I notice suggestions that people report this connection problem, the more the better. Who do you report it to? I am going to an Apple Store tomorrow to ask for help, but doubt that I will get any. Where else can I report it? And if Apple comes up