Failed to access remotely to cam PVC2300

Hi, I'm having a issue accessing remotely to 5 cameras through Internet.
I enable different port to each camera (1024, 1025 and so on), i'm using static LAN IP for those cameras (even try using DHCP). I enable DDNS with my current domain, user and password.
For my WAN service have a 2wire DSL Router with a dynamic IP.
I already update the firmware on the cameras thinking that could be an issue.
My problem is when i try to access using my "domaintocameras.xxx" does not giving any response. I try accessing disabling the port and using only the domain or enabling the port using "domaintocameras.xxx:1024".
On the router I enable the DMZ option for the camera MAC address, when I do that I can have access but using my current WAN IP.
First I thought that could be a 2wire or ISP problem but then enable the DMZ on the 2wire for a Linksys Switch (srw2024P) which does not support by itself the DDNS option and have access remotely to my switch using my domain registered on dyndns.
Basically all of my tests were connecting directly to my 2wire one of the cameras and making test and configuration.
I check on the dyndns website which WAN IP is giving me and it match to my current WAN.
Even if a make a ping test to my current domain I get access to my current WAN IP.
On the camera configuration parameters I enable the static IP address.
The only difference that I configure on both devices were the DNS:
For the switch enable the IP and as a gateway the router IP. The DNS configure the DNS that my ISP have.
For the cameras enable the IP's, as a gateway the router IP (due it is directly connected to the router) but the DNS configured the router LAN IP.
Please help!

These products are being handled by the Cisco Small Business Support Community. (URL: https://supportforums.cisco.com/community/netpro/small-business)

Similar Messages

Portal failed to access remote resource due to network failures

Hi,
We have a portlet that allows users to upload files to a SQL Server database and make it available for other users to access. The portlet code is on our remote servers. Everything works fine in dev environment, but certain files fail in pre-prod and prod within the portal, but work fine when the code is executed outside the portal.
I keep getting this error:
Error - Portal failed to access remote resource due to network failures. Try again later or contact your portal administrator.
What could the problem be?
Thank you for your help.
Rad

If the Studio service looks good on the remote server where Studio is installed (check that
the service is started and look in the Studio logs for any warnings or errors), you should
also verify the configuration settings in the Studio remote server object. Is it properly
configured and pointing to the correct remote server?
If so, check the portal servers access to the Studio server via the port specified in the remote
server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
the name of your Studio remote server. The screen should just go blank, meaning that there is
something accepting connections on that port on the given server. (We would hope it's the Studio
app and not another service occupying that port.) If you get "Could not open connection to the host"
or some such similar result, check that the network between the portal and the Studio remote server
is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
communication between the two servers).

Is this a bug or a feature? Failed to access remote jar

I tried this thing:
I have this aaa.jar which contains aaa.class and Data.class. In aaa.class, I use URLClassLoader to load some class from a remote jar (http://xxx/xxx/bbb.jar. In bbb.jar there is a class bbb.class and bbb.class has a method to use Data. Note, Data.class in already in aaa.jar.
I run this aaa.jar without trouble locally, i.e. by
java -jar aaa.jar.
However, if I put aaa.jar into my server and write one jnlp file. Then I run aaa.jar from Web start from another machine. I got error:
NoClassFound Data
Note, bbb.jar is definitely downloaded from server to another computer. I also signed the jar, signed jnlp. I also set allpermission in jnlp.
I am quite puzzled by this behavior. Can someone from Sun explain this for us. I personally think it is a bug of web start. However, it could be a hidden feature. If so, what is the way to overcome such difficulties.
Of course, I can put Data.class into bbb.jar. But, that is not the point. I suppose not to do so since in aaa.jar Data.class is already there.

Another thing you could do is to set your URLClassLoader as currentThread's contextClassLoader at the begining of your application:
public static void main(String[] args) {
ClassLoader cl = YourApplication.class.getClassLoader();
URLClassLoader ucl = new URLClassLoader(urls, cl);
try {
EventQueue eq = Toolkit.getDefaultToolkit().getSystemEventQueue();
eq.invokeAndWait(new Runnable() {
public void run() {
Thread.currentThread().setContextClassLoader(ucl);
} catch (Exception e) {
e.printStackTrace();
masa

My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...

My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Error during JNDI lookup Accessing Remote EJB (access to web service restricted using declarative security model)

Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my web
service with a declarative security model by implementing steps provided in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. When prompted
to accept the digital certificate, click Yes, when prompted for network
authentication information, enter username and password, navigate to the
Test Form tab of Test View, invoke the method by clicking the button and I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I tested my
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order to get
that working. Has anyone seen similar behavior? Is there a known resolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Andre,
It would be best if this issue is handled as an Eval Support case. Please
BEA Customer Support at http://support.beasys.com along with the required
files, and request that an Eval support case be created for this issue.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I removed "t3", still get an error but a different one (Unable to create
InitialContext:null):
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetVisaHistoryTransactions.getVisaHistoryTxn(GetVisaHistoryTransactions
.jws:67) </jwErrorDetail>
</detail>
</error>
Note: inter-domain communication is configured properly. The Web Service to
remote EJB works fine without a declarative security.
Any other ideas?
Thank you for your help.
Andre
"Anurag" <[email protected]> wrote in message
news:[email protected]...
Andre,
It seems you are using the URL
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB
whereas you should not be specifying the "t3:" protocol.
The URL should be like
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB
Please do let me know if you see any issues with this.
Note that this will only allow you to access remote EJBs in the same WLS
domain. For accessing EJBs on another domain, you need to configure
inter-domain communication by
following a few simple steps as mentioned at
http://e-docs.bea.com/wls/docs81/ConsoleHelp/jta.html#1106135. This link has
been provided in the EJB Control Workshop documentation.
Regards,
Anurag
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Raj,
I tried that before, it didn't help. I got similar error message:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB]</faultstr
ing>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
Anything else should I try?
P.S. AccountDelegatorEJB, the remote EJB my Web Service calls is NOTaccess
restricted.
I hope there is a solution.
Thanks,
Andre
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Andre,
Can you try using the following url with username and password
jndi://username:password@host:7001/my.resource.jndi.object ?
once you add webapp level security, the authenticated is the user who
invokes the EJB.
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/ejb/con
CreatingANewEJBControl.html?skipReload=true
has more info on using remote EJB's.
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Alla Resnik" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my
web
service with a declarative security model by implementing steps
provided
in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. Whenprompted
to accept the digital certificate, click Yes, when prompted for
network
authentication information, enter username and password, navigate tothe
Test Form tab of Test View, invoke the method by clicking the buttonand
I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during
JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookupfailed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260)at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64)</jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I testedmy
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order
to
get
that working. Has anyone seen similar behavior? Is there a knownresolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Security issue to access remote ejbs, URGENT!!! please and thanks.

Hi gurus:
I have questions for you. I need to access remote ejbs. the ejb(beans) have been
deployed on remote machine. I have helper class file to do JNDI lookup to point
the machine and find it.
I have local machine to have all of home interfaces, remote interfaces and stub
classes and common classes. I have local jsp and config weblogic-web.xml to allow
test user to access.
Sometimes fine but got the following message and error from my local machine.
I have no clue about that. Is any other issue that remote machine have security
to limit clients to access beans. Because remote wl server startup as system/weblogic.
If my local machine startup as system/weblogic too. It has no problem at all.
This doesn't make sense for my local machine has to have same system's password
as remote machine. Should have some issues to limit clients to access remote beans.
Thank you for any helps and suggestions in advance.
Steven.
####<Jun 7, 2001 10:34:25 AM CDT> <Error> <HTTP> <stevenzhu> <myserver> <ExecuteThread-14>
<springbow> <> <101020> <[WebAppServletContext(8365803,public_html)] Servlet failed
with Exception>
java.lang.SecurityException: Authentication for user test denied in realm wl_realm
at weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOutboundRequest.java:90)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:247)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:225)
at weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNode_WLStub.java:121)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at com.sprint.common.util.EJBHelper.getHomeInterface(EJBHelper.java:172)
at com.sprint.common.util.EJBHelper.getOrganizationSLHome(EJBHelper.java:122)
at com.sprint.common.organization.OrganizationBean.getOrganizationHome(OrganizationBean.java:290)
at com.sprint.common.organization.OrganizationBean.getOrganizationRemote(OrganizationBean.java:315)
at com.sprint.common.organization.OrganizationBean.findEmployee(OrganizationBean.java:107)
at jsp_servlet._ehr._vieworganizationalhierarchy._jspService(_vieworganizationalhierarchy.java:173)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

well, if we post in other threads, they tell me that it is ARD and server technology. If you try to post back to my mac in the normal threads about Leopard, they point us to this thread.
It seems that a lot of people are frantically looking for someone who can explain in plain english how to do the remote desktop - is remote desktop the same technology as back to my mac?
Extremely frustrating for people like me who don't have unix or programming language experience... We choose for mac because we wanted user friendlyness... What a joke!

Fail to access a modifed ISA B2B application

Hi,
I have an ISA B2B application (say b2b) in a remote server accessed by the link http://A.B.C.D:53200/b2b/b2b/init.do. Then I made a local copy called b2b_mod; made some minor changes and did the deploy with no problems so far. Using Visual Admin, it was restarted but I failed to access it. So, how can I make this access? There is a suitable URL to do that? Or something else must be done? I would apreciate any directions,
Att.
Diego Fernandes

Hi,
To setup the trace logs you need to use the following URL.
https://<system domain name>:port/<application_name>/admin
typically it should look like as below:
https://abc.com:50001/b2b/admin
Here there is an option to start and stop the logs and after stopping it will generate a Zip file which you need to download and from there you can easily find out the BAPI's or teh RFC calls.
Also when you search you should alwways keep one thing mind that these FM's normally start with CRM_ISA*
Hope it helps.
Regards
Sidd

Tyring to access remote Files present in AIX server through windows ODI

Hi all,
I need to access remote file structure , present in AIX server through my
window ODI client .But I am unable to create file Data Store for the same.
It's showing error that "schema does not exist".
please suggest me how to resolve this problem
regards
palash,

HI Julien,
It's really working ..........
Thanx a lot
For other people it will be helpfull info
Only change that I have made for that task are
1. I have created an new agent for that AIX machine
2. I have updated the ODIPARAM.bat
3. I have changed record separator as UNIX while creating data store for that file
4. While executing particular interface ,I have used the agent which is local to AIX machine ..................
Steps for execution:
At the time of designing you must have local copy of that file so that you can perform your mapping once it's executing well wid your local or no agent .
then come to the Topology manager change the location for that folder in physical schema declaration of that file server of AIX machine.
Now execute the same wid ur AIX agent u have created earlier..............
while U have changed the data store location from local directory to other AIX directory don't try to reverse the same otherwise u'll get "Execution query failed "or file not found kinda error as because odi system system searching local systems file.................
Julien can u provide me ur mail Id so that I can contact U for further assistance ofcourse
if u want................
regards
palash

Can the time machine be accessed remotely over the internet?

Hi, I am thinking about purchasing the time machine. Can the hard drive on the time machine be accessed remotely over the internet?

Do you realize that if you store some of your Mac's data (photos, music, etc.) ONLY on the external Time Capsule, AND also store your "Time Machine" app "system backups" on the Time Capsule,then if the Time Capsule hard drive ever fails you will have lost the " original" and the "backup" copies of all that data (photos, music, etc.)? They will be gone forever. NOT recommended!

Connectivity with Ms Access (Remotly) using HXTT Driver

hi all,
I m using HXTT Access Driver for connecting MS Access remotly.
when i m using MS Access Data which lies in my own system (local) its working fine..
String connectionURL= "jdbc:access:/c:/Data/MyData.mdb" ;
But if m using Data which lies at some other sytem.......
String connectionURL= "jdbc:access://192.100.100.37:3099/c:/data/MyData.mdb"
its giving the following Exception..........
java.sql.SQLException: Failed to connect to remote database: java.sql.SQLException: Failed to get response from remote server: java.net.ConnectException: Connection refused: connect
     at com.hxtt.global.SQLState.SQLException(Unknown Source)
     at com.hxtt.sql.remote.RemoteDriver.int(Unknown Source)
     at com.hxtt.sql.remote.RemoteDriver.connect(Unknown Source)
     at com.hxtt.global.SQLState.getConnection(Unknown Source)
     at com.hxtt.sql.HxttDriver.getRemoteAccessConnection(Unknown Source)
     at com.hxtt.sql.HxttDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at mypackage1.HXTTConn.main(HXTTConn.java:29)
Please help me out , i hv spent lot of time in it

You haven't run an AccessServer at
192.100.100.37:3099 or a firewall blocks that 3099
port of host 192.100.100.37. Please read
http://www.hxtt.com/access/dbadmin.html and
http://www.hxtt.com/access/advanced.html#daemon too.
Since Zhaoyh is a salesman for HXTT, I'll assume that he knows his product. It appears that HXTT provides a listener running on port 3099 that connects to Access.
%

How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv

How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv.

Do you mean you've replaced your remote and it wont work because your AppleTV is paired to your lost remote?
If so, http://support.apple.com/kb/HT1555 has you covered.

Do I need to run DNS on a colo server being accessed remotely via VPN?

My Mac Mini Server is located in a colo site. We generally use it for Web, email and a couple of application-specific services. It has a dedicated IP address. We have a separate DNS service we use to point to the domains on the server located remotely from the server. Forward and reverse lookups work fine from the server, even though the local DNS service is turned off.
However, we now have a couple of things we want to access remotely on the server via VPN (for example, some files via AFP). The firewall blocks remote AFP requests (using the built-in firewall, not a separate box). We can connect via VPN without problems. However, AFP does not work. If I allow AFP in the firewall and try to connect, no problems at all.
Since the Mini is located by itself and will never likely have anything connected to a "local network" (never running DHCP, etc.), there generally doesn't seem to be a need to run DNS on the server.
I suspect the problem is that when you VPN into the server you are on its "local network", whatever that means, so the DNS does not resolve since the local DNS service is not running. However, I am not positive of this.
Must we run local DNS? Does it have to mirror the remote DNS that we currently reference? Can we somehow "reference" the local DNS from VPN clients trying to access local services?
I hope this question makes some sense.

Bear with me please....
The Mac Mini is in a data center on a shelf, getting a direct connection to the Internet via ethernet with a fixed IP address (under the covers, I suspect that the data center is using some sort of router or switch, but I am not paying for a hardware firewall or other gateway). There is no local network for the Mini. It is not running DHCP, not handing out NAT addresses, etc. DNS is currently off. Rather than using the local DNS, the Mini is resolving its DNS needs with a DNS server located at another site, over the Internet. This seems to work fine (i.e., changeip confirms it is working and services seem to work).
I am currently using the software firewall built into SLS.
I want to turn on VPN so that remotely located computers can access services on the Mini without having to make the services visible through the firewall.
I am able to connect devices via VPN with little difficulty (iPhones, Macs, etc.). However, when I try to access services (let's use AFP as an example), I cannot access them UNLESS they are allowed through the firewall. This tells me that I am not seeing the services through the VPN, but rather through the Internet directly.
What I meant by "local network" is that the VPN allocates local IP addresses when devices log into the VPN service (10.0.x.x). There is no DHCP allocating these addresses, just VPN.
My question is: why can I not see the services on the Mini blocked by the firewall when successfully logged into VPN on the server? Isn't the whole point of the VPN to gain access to services behind the firewall?
I am guessing (with no particular information to support my thesis) that somehow without DNS running on the Mini, VPN clients are unable to access services on the Mini. I do not know for sure, however, if this is the problem. If it IS a problem, then the question is whether I should completely copy the DNS entries from the remote DNS server to the Mini and start the service. Will that solve the issue? Create conflicts with the DNS (since it is now located on both a remote service and on the Mini)? It certainly will create a maintenance headache since now I will have to maintain the DNS in both places.
I am hesitant to migrate all of my DNS services to the Mini (because I will also have to go to the domain registrars to change where they point, etc.) to eliminate the remote one. And I am not sure it will solve this problem anyway.
Sorry for all of the typing!

Error while Running ESS - TypeBroker failed to access SLD: Error while obta

Hi all,
We try to run a WebDypro Application of ESS on 6.40 with mySAP ERP 2004:
All the necessary JCO connections
- SAP_R3_HumanResources
- SAP_RE_HumanResources_MetaData
are maintained and pinged and tested positive.
Still, we get following error message. (see complete stack below):
...TypeBroker failed to access SLD: Error while obtaining JCO connection.
Could anybody help, please?
ERROR STACK
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:49:12[UTC], changelist=329752, host=PWDFM026)
Web Dynpro code generators of DC sap.com/essarbank:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/pcui_gp~xssutils:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/ess~per:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/pcui_gp~xssfpm:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
Web Dynpro code generators of DC sap.com/ess~xx:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.pcuigp.xssfpm.wd.model.types.Ext_Service could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:205)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:485)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:433)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:362)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.getPublicInterface(DelegatingComponent.java:142)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetBackendConnectionsController(InternalFPMComponent.java:199)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:171)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:105)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:346)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:349)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:599)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:89)
     at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:408)
     at com.sap.dictionary.runtime.ProviderFactory.resolveLogicalNameToJCODestination(ProviderFactory.java:354)
     at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:215)
     at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
     at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:87)
     at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:73)
     at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
     at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
     at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:234)
     ... 40 more

Hi
The type broker error indicates, issue with regard to your SLD. Check whether the SLD is configured properly. You need to do a initial level of SLD between your message server (SAp/back end) and your server. Check whether landscape has been created for the SAP server.
landscape must be proper with your server configuration/installation number, SID and instance number...etc...
After you have your SLD, recheck on your JCO for the model data and meta data connections..
If you have any specific issues do let us know
thanks
sathya

Operations Manager Failed to Access the Windows Event Log and management server is showing warning state

Hi,
I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
again and again i.e. Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
Most recent error details: The RPC server is unavailable.
Please suggest me how to resolve this so that my management server will again come back in healthy state.
Thanks
Abhishek

Hi Abhishek,
As i mentioned earlier the Alert resolution says the same points.
Can you give details on the below ?
Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
Did you recently configure any new alert where you mentioned "Dhcpadminevents"
as a event log location ?
If yes then what is the target you selected for the rule / monitor there ?
Can you post the results for analysis ?
Gautam.75801

Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
Sanjib

Hello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib

Failed to access remotely to cam PVC2300

Similar Messages

Maybe you are looking for