Failed to authenticate & Unable to synchronize login time

Hi,
My OSX clients are bound to OSX Server.
Most clients are 10.8, some are 10.9.
Server is 10.10, recently migrated from 10.6.8.
Most clients can log in to the user accounts in good order.
However I have a couple of clients that cannot log in (they both happen to be 10.9 clients).
The login box just shakes when credentials for any network user are enetered.
When this happens the systme.log on client shows:
Oct 30 09:33:24 imac1252 SecurityAgent[166]: User info context values set for userxyz
Oct 30 09:33:25 imac1252 authorizationhost[182]: Failed to authenticate user <xyz> (error: 9).
The system.log on 10.10 server shows:
DSUpdateLoginStatus: Unable to synchronize login time for userxyz: 77009
I have checked the time and time zones on server and client and they are identical.
Does anyone have any guidance, please?
Thanks,
b.

I spent some hours with Apple Support on this.
Apple Support logged into my server, had me do some testing from different clients with them watching, detroyed & rebuilt OD database, tested with a brand new fresh OD database, uploaded some files for analysis, etc.
The problem is...
Looking back 8 years or so, my mobile user accunts were created on server 10.6 (or maybe even 10.4 can't remember that far back )
OSX server (back then) did not require or even have have a certiftcate for these accounts.
Jumping forward to today...
Server 4 on 10.10 requires a certificate for 10.9 clients (and above). But my my OD database (created years ago) does not have a certificate for the accounts to use, and they would not know anything about it even if I created one.
So, support tell me the only option to get things working again is to destroy and rebuild the OD database. I can keep Users, Groups etc, by exporting, but I will need to recreate all passwords.
I will do that in due course.
In the meantime my workaround is to have 10.9 users disconnect from network at the time they enter their login password. They can reconnect as soon as they hit 'return'.
b.

Similar Messages

Unable to synchronize the time with chrony (probably..)

Hi all,
i've switched to systemd and set up chrony (with networkmanager-dispatcher-chrony) to correctly set the time.
Still, if i run timedatectl status i get
Local time: Sun, 2012-10-28 20:09:14 CET
Universal time: Sun, 2012-10-28 19:09:14 UTC
Timezone: Europe/Rome
NTP enabled: yes
NTP synchronized: no
RTC in local TZ: no
From what i read, it seems that chrony actually syncs to the server, but than it doesn't set the time correctly. Is it right? And if so, why?

I was having the same issue with Chrony, which is why I did some research (and found a possible fix) which could be of use to you. Please see this topic, specifically issue 3, for more information.
Last edited by ackalker (2012-12-10 23:19:14)

ZFS Subscriber Error -1 and Fail to authenticate

We are running ZFS 7.01, using TED to distribute apps. Runing into randomly having subscribers not completely accept distributions or updates to distributions, erroring out with "Fail to authenticate. Will retry more times" & "Unknown meaning for error number -1; Please call a Novell support provider".
Exiting and restarting the ZFS.ncf (subscriber) fixes the issue for a while. We like TED, but the subscribers consistency is an issue. Help.
Paul

Rolf--Please keep me in the loop on this...Our system (TED) is unreliable at this point because on the need for manual reset. Let me know if it works out for you. Or if you hear from Novell about a patch.
Much Thanks--Paul
>>> Rolf Lidvall<[email protected]> 10/22/2007 10:08 AM >>>
We also have that issue so I called our "Novell
support provider" like the message says and it
turned out to be a well known issue with Java.
We got a couple of FTF-files for testing and so
far so good, they seem to cure the issue at least
in our environment. I have asked Novell if and when
they will release these files in a patch, and if it will
be in a NetWare, Java or TED patch. No answer yet.
Regards
Rolf Lidvall
Swedish Radio (Ltd)

HT3275 I am backing up my iMac using TIME MACHINE and red FAILED occured stating "unable to complete back up. an error acccured while creating back up folder" can anybody help me pls. =Mochincess

Backing up Problem: Using time Machine to back up my iMac, and failed occured stating" unable to complete backup. An error occured while creating backup folder. Pls. help....using reformatted WD 2TB Passport

Hello...
https://discussions.apple.com/thread/4413173?start=0&tstart=0

Outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari

outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari

outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari

Please help, unable to synchronize and run Applications NW2004s

Hi All,
I am newbie (no only for mobile, them for SAP) i can't run any example! and i really need for your help:
I have a Pentium IV +2GB RAM + Windows server 2003 + Oracle ( I them try to install the system in a Xeon but i have problems with the SDM password so i can't update the Java Components to SP 10).
The Enviroment:
Sever called erick:
1) First i install NW2004s ABAP + JAVA + MI 7.0, SP 6 over Oracle 10.2
2) After that i Update:
Kernel to version 83
SAINT, ABA, Basis to SP 10
JSPM, NWCLIENT, NWLAP, NWADMIN, NWDRIVERS to SP 10 for MI 7.0
3) After that, i used the MI template going to my server: http://erick:50100/nwa, login as J2EE_ADMIN, deploy & changes.... it appears to work... but when a login into the web system it says:
 System Landscape Directory is not accessible.
 Local System Only can be administrate. (maybe here is the key)
On the Client side:
Windows XP + NW developer Studio Version: 7.0.10 + MI Client (I extract this from the NWCLIENTNT10_0-20000910.SCA, SAP Mobile Infrastructure, Version MI 70 SP10 Pacht 0 )
NW developer Studio is Configured in this form (Using Windows -> Preferences -> MI Development)
MI Folder: C:\Archivos de programa\SAP Mobile Infrastructure (Archivos de Programas (Spanish) = Program Files)
Java SDK tools.jar file: C:/j2sdk1.4.2_08/lib/tools.jar, I can't change it.
MI server name: localhost (I think this is Wrong, this have to be erick?, i will try with this)
MI weapp TCP port: 4444
Command line to launch browser: cmd /C start iexplorer
Awt runtime:
MI Home Folder: C:\Archivos de programa\SAP Mobile Infrastructure (C) (I extract this from the NWCLIENTNT10_0-20000910.SCA too)
MI Logon Information: eilarraza, this user was the one that i create to update the system in the server, it has: SAP_ALL, and SAP_NEW permissions.
Password: The Master Password of the system.
When a push the Test Setting button, it works!
MI Client Configuration:
USER: eilarraza
Client: 000
Languaje: EN
Country: Venezuela
Time Zone: ACT
Synchronization:
Protocol: http
Host: erick
Port: 50100
System: ERI
Proxy: NO, we used DHCP.
Problem:
I am Unable to synchronize with MI server.
I import a .war file, i export It, but a i can't run It.
Searching in the forum i arrive to a Excellent BLOG: http://jogel.sdn.googlepages.com/milad
(Literally i read all the BLOG, is very good for the newbies, it is a excellent work)
I Install the mobile application using a tool called LAD, i restart the MI Client, and the application is Installed!!! But when a try to Syncronized it i received the same error:
Syncronization Started.
Connection Set up (without proxy) to http://erick:50100/sap/bc/MJC/mi_host?~sysid=ERI&
Connection to server failled
Problems in the Syncrhonization Not Found 404; The server has not found anything matching the URI given.
Basically i can't Syncrhonaze the MI Client with the Server. I search in the Forum, Documentation, Google, Blogs, etc etc, Surely is a configuration problem, please i need some tips.
Best Regards,
Erick Ilarraza

Hi Jo Santiago, Sivakumar V
Thanks a lot for your help!
Jo: I made Pings to erick:
Ping statistics for xxx.xxx.xxx.xxx: (i removed the local ip)
Packects: Sent = 4, Received = 4, Lost = 0 (0% loss), Works perfect.
nslookup does not work, maybe because all the machines are in a local network.
I am investigating about: ICM Logon and SLD. I don't know what it is that, i Remember that in the installation phase i say NO when he ask me to install the SLD.
Sivakumar:
After the 3 Steps, the services (that were down) now are UP but when a try to test the service he ask me for:
Enter username and password for "SAP Web Application Server [ERI] at http://erick:8001
I try with J2EE_ADMIN + Master Password, I always use this user to go into the Web Server.
Logon failed.
Note
Logon performed in system ERI .
Logon performed for client 001 and language EN.
Them i try with: SAP*, and eilarraza (SAP_ALL, SAP_NEW permissions)
It does not work.
After i try to synchronize the MI Client (with the services mi_host and mi_services UP). But it does not work.
So who is exactly the middleware user? The J2EE_ADMIN? or the one that i create with SAP* to update the system to SP10 (It has SAP_ALL, SAP_NEW permissions, in my case is called eilarraza) Maybe the problem is that i a not using the correct user in the MI Client configuration neither in the test of the service.
Best Regards,
Erick Ilarraza

Failed to authenticate - Shared Services 11.1.2.1

I've installed and configured Foundation services. When I try to login to Shared Services, I get the following error:
EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials.
Code: 1000
Description: An error occurred processing the result from the server
Version - 11.1.2.1
Windows 2003 R2 SP2
Can anyone help with this issue? I haven't find any solutions on the forum...
Thanks

John,
Thanks for the feedback. This is a new install, so I am entering the password that I used in the EPM configurator. Here is the full log:
<Aug 29, 2011 3:39:54 PM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 29, 2011 3:39:54 PM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 29, 2011 3:39:55 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.2-b06 from Sun Microsystems Inc.>
<Aug 29, 2011 3:39:59 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Aug 29, 2011 3:40:02 PM EDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Aug 29, 2011 3:40:02 PM EDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Aug 29, 2011 3:40:02 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 29, 2011 3:40:02 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 29, 2011 3:40:02 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 29, 2011 3:40:02 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log00004. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log.>
<Aug 29, 2011 3:40:02 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
<Aug 29, 2011 3:40:11 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 29, 2011 3:40:14 PM EDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of FoundationServices0 has been migrated to backup server and the backup server is accessing the TLOG of FoundationServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Aug 29, 2011 3:40:16 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 29, 2011 3:40:16 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\access.log00001. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\access.log.>
<Aug 29, 2011 3:40:25 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 29, 2011 3:40:25 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for SHAREDSERVICES#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_sharedservices_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_sharedservices_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM HSS, Oracle EPM Misc libraries, Oracle EPM BPM UI libraries, Oracle EPM BPM UI shared webapp, Oracle EPM Struts libraries]
BPMUI shared webapp referenced from SHAREDSERVICES#11.1.2.0
Application name: SHAREDSERVICES#11.1.2.0
Application source: interop.ear
Server name: FoundationServices0
Server port: 28080
Server SSL port: 28443
Application context: interop
Registry product type: SHARED_SERVICES_PRODUCT
Registry physical web application type: SHARED_SERVICES_WEBAPP
weblogic.Name property is 'FoundationServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for SHAREDSERVICES#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for SHAREDSERVICES#11.1.2.0
loggingUpdateSHAREDSERVICES.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
<Aug 29, 2011 3:40:54 PM EDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\tmp\servers\FoundationServices0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\oj8n6j\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for WORKSPACE#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_workspace_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_workspace_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM BPM UI libraries, Oracle EPM BPM UI shared webapp, Oracle EPM Misc libraries, Oracle EPM LCM libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp referenced from WORKSPACE#11.1.2.0
Application name: WORKSPACE#11.1.2.0
Application source: workspace.ear
Server name: FoundationServices0
Server port: 28080
Server SSL port: 28443
Application context: workspace
Registry product type: WORKSPACE
Registry physical web application type: WORKSPACE_WEBAPP
weblogic.Name property is 'FoundationServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for WORKSPACE#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for WORKSPACE#11.1.2.0
loggingUpdateWORKSPACE.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
**********Getting connection from hub connection pool..Testing JNDI connection....
<Aug 29, 2011 3:41:25 PM EDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Aug 29, 2011 3:41:25 PM EDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of FoundationServices.>
<Aug 29, 2011 3:41:30 PM EDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Aug 29, 2011 3:41:55 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 29, 2011 3:41:55 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 29, 2011 3:42:00 PM EDT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Aug 29, 2011 3:42:00 PM EDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Program Files\Java\jdk1.6.0_27\jre\lib\security\cacerts.>
<Aug 29, 2011 3:42:01 PM EDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 15:12:27 EST 2002,
To: Tue Mar 22 16:12:27 EDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.2.177:28443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.2.177:28080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:28080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Aug 29, 2011 3:42:01 PM EDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "FoundationServices0" for domain "EPMSystem" running in Production Mode>
<Aug 29, 2011 3:42:01 PM EDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Aug 29, 2011 3:42:05 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 29, 2011 3:42:05 PM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Thanks!
Brent

ETL Master SQL job got a "Login Time Out " error again

Below error coming randomly Sometimes it works perfectly fine and sometimes it goes down with following error message. The connectivity between two servers are seamless there
is not a single drop of packet.
Please suggest what is wrong happening here. One server is on Windows 2003 x64 and another is on Windows 2008 R 2.
Executed as user: xyz\user1. Microsoft (R) SQL Server Execute Package Utility Version 11.0.3393.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 12:00:07 AM Error: 2013-12-27 01:01:57.58     Code: 0xC0202009     Source:
DailySync_I Connection manager "OLE_SRC2_"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description:
"Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unable to complete login process due to delay in login response". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "TCP Provider: Timeout error [258]. ". End Error Error: 2013-12-27 01:01:58.58     Code: 0xC020801C
Source: Load Lookup Tables OLE DB Source [699]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "OLE_SRC2_" failed with error
code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2013-12-27 01:01:59.67     Code: 0xC0047017
Source: Load Lookup Tables SSIS.Pipeline     Description: OLE DB Source failed validation and returned error code 0xC020801C. End Error Error: 2013-12-27 01:02:00.81     Code: 0xC004700C
Source: Load Lookup Tables SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2013-12-27 01:02:01.95     Code: 0xC0024107     Source: Load Lookup
Tables      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:00:07 AM Finished: 1:20:13 AM Elapsed: 4805.61
seconds. The package execution failed.

Hi Inder Johar,
The issue may occur due to the various reasons. You can check the “Connect Time” setting of the Connection Manager "OLE_SRC2_", and increase its timeout value.
If the issue persists, maybe it occurs because the Windows Firewall or certain anti-virus software blocks the RPC dynamic range of TCP Ports between SQL Server and Domain Controllers. In this case, temporarily disable third party anti-virus software, or
configure RPC dynamic port allocation to work with firewalls referring to the following KB article:
http://support.microsoft.com/kb/154596.
Regards,
Mike Yin
TechNet Community Support

Wireless Clients failing to authenticate via the RADIUS

Hi friends
I am trying to use Radius server (NPS) to authenticate my wireless users using 1941W router.
For some reason it cannot authenticate successfully. I checked the radius server is reachable but still I dont see any luck.
the config is like this:
***************Config snap shot*********************
aaa new-model
aaa group server radius group1
server 10.32.0.154 auth-port 1812 acct-port 1813
aaa authentication login EAP group group1
aaa session-id common
dot11 syslog
dot11 ssid CORP
   vlan 320
   authentication open eap EAP
   mbssid guest-mode
interface Loopback1
ip address 10.51.240.1 255.255.255.255
no ip route-cache
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 320 mode ciphers aes-ccm
ssid CORP
antenna gain 0
mbssid
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 320 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 320 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.51.246.2 255.255.255.0
no ip route-cache
ip default-gateway 10.51.246.1
ip radius source-interface Loopback1
radius-server host 10.32.0.154 auth-port 1812 acct-port 1646 key V3rv3@mc0m
bridge 1 route ip
*********************End of config snap shot*********************
When i run the debug i see the following messages which I am still trying to understand thought it would be worthwhile mentioning here:
*******************Debug**********************
AP1#
*Mar 1 01:04:41.951: AAA/BIND(0000001E): Bind i/f
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: Create new client 2477.037e.22d4 for application 0x1
*Mar 1 01:04:41.951: dot11_auth_initialize_client: 2477.037e.22d4 is added to the client list for application 0x1
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: req->auth_type 0
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: auth_methods_inprocess: 2
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: eap list name: EAP
*Mar 1 01:04:41.951: dot11_run_auth_methods: Start auth method EAP or LEAP
*Mar 1 01:04:41.951: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 1 01:04:41.951: dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 2477.037e.22d4
*Mar 1 01:04:41.951: EAPOL pak dump tx
*Mar 1 01:04:41.951: EAPOL Version: 0x1 type: 0x0 length: 0x002F
*Mar 1 01:04:41.951: EAP code: 0x1 id: 0x1 length: 0x002F type: 0x1
030017B0: 0100002F 0101002F 01006E65 74776F72 .../.../..networ
030017C0: 6B69643D 56434F52 502C6E61 7369643D kid=VCORP,nasid=
030017D0: 4B414C2D 30322D41 50312C70 6F727469 KAL-02-AP1,porti
030017E0: 643D30                               d=0
*Mar 1 01:04:41.955: dot11_auth_send_msg: sending data to requestor status 1
*Mar 1 01:04:41.955: dot11_auth_send_msg: Sending EAPOL to requestor
*Mar 1 01:04:41.955: dot11_auth_dot1x_send_id_req_to_client: Client 2477.037e.22d4 timer started for 30 seconds
*Mar 1 01:04:41.955: dot11_auth_parse_client_pak: Received EAPOL packet from 2477.037e.22d4
*Mar 1 01:04:41.955: EAPOL pak dump rx
*Mar 1 01:04:41.955: EAPOL Version: 0x1 type: 0x1 length: 0x0000
033E86E0:          01010000                        ....
*Mar 1 01:04:41.955: dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,EAP_START) for 2477.037e.22d4
*Mar 1 01:04:41.955: dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 2477.037e.22d4
*Mar 1 01:04:41.959: EAPOL pak dump tx
*Mar 1 01:04:41.959: EAPOL Version: 0x1 type: 0x0 length: 0x002F
*Mar 1 01:04:41.959: EAP code: 0x1 id: 0x2 length: 0x002F type: 0x1
03001A20: 0100002F 0102002F 01006E65 74776F72 .../.../..networ
03001A30: 6B69643D 56434F52 502C6E61 7369643D kid=VCORP,nasid=
03001A40: 4B414C2D 30322D41 50312C70 6F727469 KAL-02-AP1,porti
03001A50: 643D30                               d=0
*Mar 1 01:04:41.959: dot11_auth_send_msg: sending data to requestor status 1
*Mar 1 01:04:41.959: dot11_auth_send_msg: Sending EAPOL to requestor
*Mar 1 01:04:41.959: dot11_auth_dot1x_send_id_req_to_client: Client 2477.037e.22d4 timer started for 30 seconds
*Mar 1 01:04:41.963: dot11_auth_parse_client_pak: Received EAPOL packet from 2477.037e.22d4
*Mar 1 01:04:41.963: EAPOL pak dump rx
*Mar 1 01:04:41.963: EAPOL Version: 0x1 type: 0x0 length: 0x0012
*Mar 1 01:04:41.963: EAP code: 0x2 id: 0x1 length: 0x0012 type: 0x1
033603C0:                            01000012              ....
033603D0: 02010012 01564552 56455C47 30373532 .....VERVE\G0752
033603E0: 3736                                 76
*Mar 1 01:04:41.963: dot11_auth_parse_client_pak: id is not matching req-id:1resp-id:2, waiting for response
*Mar 1 01:04:41.963: dot11_auth_parse_client_pak: Received EAPOL packet from 2477.037e.22d4
*Mar 1 01:04:41.963: EAPOL pak dump rx
*Mar 1 01:04:41.963: EAPOL Version: 0x1 type: 0x0 length: 0x0012
*Mar 1 01:04:41.963: EAP code: 0x2 id: 0x2 length: 0x0012 type: 0x1
033AEE90:                   01000012 02020012          ........
033AEEA0: 01564552 56455C47 30373532 3736      .VERVE\G075276
*Mar 1 01:04:41.963: dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 2477.037e.22d4
*Mar 1 01:04:41.963: dot11_auth_dot1x_send_response_to_server: Sending client 2477.037e.22d4 data to server
*Mar 1 01:04:41.963: AAA/AUTHEN/PPP (0000001E): Pick method list 'EAP'
*Mar 1 01:04:41.963: dot11_auth_dot1x_send_response_to_server: Started timer server_timeout 60 seconds
*Mar 1 01:04:41.963: %AAA-3-BADSERVERTYPEERROR: Cannot process authentication server type *invalid_group_handle*
*Mar 1 01:04:41.963: dot11_auth_dot1x_parse_aaa_resp: Received server response: FAIL
*Mar 1 01:04:41.963: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server response
*Mar 1 01:04:41.963: Client 2477.037e.22d4 failed: EAP reason 2
*Mar 1 01:04:41.963: dot11_auth_dot1x_parse_aaa_resp: Failed client 2477.037e.22d4 with aaa_req_status_detail 2
*Mar 1 01:04:41.963: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 2477.037e.22d4
*Mar 1 01:04:41.963: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 2477.037e.22d4
*Mar 1 01:04:41.963: EAPOL pak dump tx
*Mar 1 01:04:41.963: EAPOL Version: 0x1 type: 0x0 length: 0x0004
*Mar 1 01:04:41.963: EAP code: 0x4 id: 0x2 length: 0x0004
03001DC0:                   01000004 04020004          ........
03001DD0:
*Mar 1 01:04:41.963: dot11_auth_send_msg: sending data to requestor status 1
*Mar 1 01:04:41.967: dot11_auth_send_msg: Sending EAPOL to requestor
*Mar 1 01:04:41.967: dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds
*Mar 1 01:04:41.967: dot11_auth_dot1x_send_client_fail: Authentication failed for 2477.037e.22d4
*Mar 1 01:04:41.967: dot11_auth_send_msg: sending data to requestor status 0
*Mar 1 01:04:41.967: dot11_auth_send_msg: client FAILED to authenticate 2477.037e.22d4, node_type 64 for application 0x1
*Mar 1 01:04:41.967: dot11_auth_delete_client_entry: 2477.037e.22d4 is deleted for application 0x1
*Mar 1 01:04:41.967: %DOT11-7-AUTH_FAILED: Station 2477.037e.22d4 Authentication failed
*Mar 1 01:04:41.967: dot11_auth_client_abort: Received abort request for client 2477.037e.22d4
*Mar 1 01:04:41.967: dot11_auth_client_abort: No client entry to abort: 2477.037e.22d4 for application 0x1
Any Idea where the problem could be?
Regards,
Mohit

Just to add here, i ran another command on the AP/Router which indicates to me that there was no response from the Radius server.
KAL-02-AP1#sh radius statistics
                                  Auth.      Acct.       Both
         Maximum inQ length:         NA         NA          1
       Maximum waitQ length:         NA         NA          2
       Maximum doneQ length:         NA         NA          1
       Total responses seen:          0          0          0
     Packets with responses:          0          0          0
Packets without responses:         12          0         12
Access Rejects           :          0
Average response delay(ms):          0          0          0
Maximum response delay(ms):          0          0          0
Number of Radius timeouts:         48          0         48
       Duplicate ID detects:          0          0          0
Buffer Allocation Failures:          0          0          0
Maximum Buffer Size (bytes):        186          0        186
Source Port Range: (2 ports only)
1645 - 1646
Last used Source Port/Identifier:
1645/12
1646/0
Elapsed time since counters last cleared: 1h52m

Failed to authenticate with the device at ip.ip.ip.ip using TELNET

Hi!
I can no longer use CCA :-)
I tried everything, but when I enter user and password after waiting a few tens of seconds I get the following error window: "Failed to authenticate with the device at ip.ip.ip.ip using TELNET. TELNET access is required for access to voice configuration. Cannot continue. Exiting CCA."
Given that I do not understand the need to use the 'telnet', I verified that UC500 was reachable from the PC via telnet. But CCA 2.2.5 don't work and I find no reason, even logging on to see go console error messages or anything else that turn me to the solution. Before removing CCA and back to 2.2.4, I see if I could solve the problem somehow.
I tried to see what was going on the network with wireshark:
Time Source Destination Protocol Info
722.508214 pc.pc.pc.128 uc.uc.uc.1 TELNET Telnet Data ... (the password in clear text!!!!)
722.713551 uc.uc.uc.1 pc.pc.pc.128 TCP telnet > xs-openstorage [ACK] Seq=80 Ack=37 Win=4092 Len=0
722.713606 pc.pc.pc.128 uc.uc.uc.1 TELNET Telnet Data ... (a '/r/n' after send user pwd on previus pkt)
722.911528 uc.uc.uc.1 pc.pc.pc.128 TCP telnet > xs-openstorage [ACK] Seq=80 Ack=39 Win=4090 Len=0
724.608892 pc.pc.pc.128 uc.uc.uc.1 TCP xs-openstorage > telnet [FIN, ACK] Seq=39 Ack=80 Win=65456 Len=0
724.611192 uc.uc.uc.1 pc.pc.pc.128 TCP telnet > xs-openstorage [ACK] Seq=80 Ack=40 Win=4090 Len=0
724.721538 uc.uc.uc.1 pc.pc.pc.128 TELNET Telnet Data ... (a '/r/n')
724.721589 pc.pc.pc.128 uc.uc.uc.1 TCP xs-openstorage > telnet [RST, ACK] Seq=40 Ack=82 Win=0 Len=0
...but do not understand why the PC ends the connection!
NB: Obviously the username and password are correct and the UC does not report login errors.
Can anyone give me a hint? 1k thanks
73,
Arturo

Most files are 0 bytes long, only Application_Log report some output:
++: DEBUG: : User Preference Settings App Version=2.2 (5)
++: DEBUG: : Current App Version=2.2 (5)
++: DEBUG: : *** Site name: DIM - Lab
++: DEBUG: : *** Remove site from history list: DIM - Lab
++: DEBUG: : Last used connection string: http://DIM+-+Lab:80/
++: DEBUG: : Filtered connection string: DIM+-+Lab
++: DEBUG: : SiteName : DIM+-+Lab DecodedName: DIM - Lab
++: DEBUG: : DIM - Lab is customer site name: true
++: DEBUG: : Set connection string to: ---.---.---.---
++: DEBUG: : Filtered connection string: DIM+-+Lab
++: DEBUG: : Duration for [upd Mirror<--Device() @ com.cisco.cpnm.features.defn.connect.ConnectDialogTask] = [1265] msec.
++: DEBUG: : *** Site name: DIM - Lab
++: DEBUG: : *** Remove site from history list: DIM - Lab
++: DEBUG: : Last used connection string: http://DIM+-+Lab:80/
++: DEBUG: : Filtered connection string: DIM+-+Lab
++: DEBUG: : SiteName : DIM+-+Lab DecodedName: DIM - Lab
++: DEBUG: : DIM - Lab is customer site name: true
++: DEBUG: : Set connection string to: ---.---.---.---
++: DEBUG: : Filtered connection string: DIM+-+Lab
++: DEBUG: : Filtered connection string: DIM+-+Lab
++: DEBUG: : Filtered connection string: DIM+-+Lab
++: DEBUG: : WDTask::setHierarchy .TroubleshootingLogsTask
++: DEBUG: : Duration for [create() @ com.cisco.cpnm.features.defn.logs.TroubleshootingLogsTask] = [78] msec.
NB: I understand that the program tries to connect using something invented name of the site?
I create another site with a valid DNS name and I try to connect... Last log lines are:
++: DEBUG: : conn string: HTTP://valid.name.tld:80/
++: DEBUG: : ConnectionMediator:connect() : http://valid.name.tld:80/
++: DEBUG: : URL After Decoding :http://valid.name.tld:80/
++: DEBUG: : ConnectionMediator:isFederation() : http://valid.name.tld:80/
++: DEBUG: : initAppMode():http://valid.name.tld:80/
++: DEBUG: : ConnectionMediator:isFederation() : http://valid.name.tld:80/
++: DEBUG: : initAppWithConnection():http://valid.name.tld:80/
++: DEBUG: : Found Module For device type : UC540W-BRI-K9
++: DEBUG: : *** RouterInfo.ShVer.Fields=[UC540W-BRI-K9, cme, 1 day 23 hours 49 minutes, flash:uc500-advipservicesk9-mz.150-1.XA2, , 15.0(1)XA2, N, N, , UC500-ADVIPSERVICESK9-M, , 1 ]
++: DEBUG: : AuthGrp@1978622: getAuthCreds() called for: telnet://uc.uc.uc.1:23; realm: null
++: DEBUG: : AuthGrp@1978622: getAuthCreds() called for: telnet://uc.uc.uc.1:23; realm: null
++: DEBUG: : AuthGrp@1978622: getAuthCreds() called for: telnet://uc.uc.uc.1:23; realm: null
73

Help with exception: A connection could not be obtained in the specified login time of 5 seconds

Hi Kodo gurus,
I run into following problem:
Since I start to use JDOQL queries, the system I am developing start to
throw Exception saying:
javax.jdo.JDODataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode1']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5
seconds. [code=0;state=null]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode1']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5 seconds.
     at
com.solarmetric.kodo.impl.jdbc.runtime.SQLExceptions.throwDataStore(SQLExceptions.java:23)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:732)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:93)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
     at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
It seems it always happens when we are doing a query. I had the
"javax.jdo.option.MaxPool=20" and for postgresql I have "max_connections
= 80", the action I am doing at that time is quite simple (and the
system is just freshly started) and I would not expect it is using more
than 2 connections since there is only one read and one write going on.
Do you guys have any clue how could this happen? do I miss something
obvious? and how are the connections managed for the query?
thanks a lot!
Tao

Hi, Steve,
Sorry I am late on the responding - was distracted by some other stuff -
here is the stack trace I got:
// STATCK TRACE
//###############################################################javax.jdo.JDODataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode3']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5
seconds. [code=0;state=null]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode3']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5 seconds.
at
com.solarmetric.kodo.impl.jdbc.runtime.SQLExceptions.throwDataStore(SQLExceptions.java:23)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:732)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:93)
at
com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
at
com.cloverworxs.impl.as.profile.PropertyHelperImpl.findPropertyDefByName(PropertyHelperImpl.java:37)
at
com.cloverworxs.impl.as.profile.ProfileBase.getStringProperty(ProfileBase.java:103)
at
com.cloverworxs.app.struts.handler.ProfileHelper.getLearningModes(ProfileHelper.java:177)
at
com.cloverworxs.app.struts.handler.KuarkHandler.handleTree(KuarkHandler.java:106)
at
com.cloverworxs.app.struts.handler.MovableKuarkHandler.handleTree(MovableKuarkHandler.java:89)
at
com.cloverworxs.app.struts.handler.RecorderKuarkHandler.handle(RecorderKuarkHandler.java:111)
at
com.cloverworxs.app.struts.action.RecorderController.detail(RecorderController.java:251)
at
com.cloverworxs.app.struts.action.AbstractModelAction.execute(AbstractModelAction.java:118)
at
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:465)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at
com.cloverworxs.app.struts.RequestProcessor.process(RequestProcessor.java:44)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1422)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:505)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2396)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:405)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:380)
at
org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:508)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:533)
at java.lang.Thread.run(Thread.java:536)
NestedThrowablesStackTrace:
java.sql.SQLException: A connection could not be obtained in the
specified login time of 5 seconds.
at
com.solarmetric.datasource.DataSourceImpl$AbstractPool.timeout(DataSourceImpl.java:615)
at
com.solarmetric.datasource.DataSourceImpl$AbstractPool.getConnection(DataSourceImpl.java:589)
at
com.solarmetric.datasource.DataSourceImpl.getConnection(DataSourceImpl.java:326)
at
com.solarmetric.datasource.DataSourceImpl.getConnection(DataSourceImpl.java:319)
at
com.solarmetric.kodo.impl.jdbc.runtime.DataSourceConnector.getConnection(DataSourceConnector.java:51)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.getConnectionFromFactory(SQLExecutionManagerImpl.java:183)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.getConnection(SQLExecutionManagerImpl.java:142)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.prepareStatementInternal(SQLExecutionManagerImpl.java:807)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedQueryInternal(SQLExecutionManagerImpl.java:761)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeQueryInternal(SQLExecutionManagerImpl.java:691)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeQuery(SQLExecutionManagerImpl.java:372)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeQuery(SQLExecutionManagerImpl.java:356)
at
com.solarmetric.kodo.impl.jdbc.ormapping.ClassMapping.selectPrimaryMappings(ClassMapping.java:1221)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:707)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:93)
at
com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
at
com.cloverworxs.impl.as.profile.PropertyHelperImpl.findPropertyDefByName(PropertyHelperImpl.java:37)
at
com.cloverworxs.impl.as.profile.ProfileBase.getStringProperty(ProfileBase.java:103)
at
com.cloverworxs.app.struts.handler.ProfileHelper.getLearningModes(ProfileHelper.java:177)
at
com.cloverworxs.app.struts.handler.KuarkHandler.handleTree(KuarkHandler.java:106)
at
com.cloverworxs.app.struts.handler.MovableKuarkHandler.handleTree(MovableKuarkHandler.java:89)
at
com.cloverworxs.app.struts.handler.RecorderKuarkHandler.handle(RecorderKuarkHandler.java:111)
at
com.cloverworxs.app.struts.action.RecorderController.detail(RecorderController.java:251)
at
com.cloverworxs.app.struts.action.AbstractModelAction.execute(AbstractModelAction.java:118)
at
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:465)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
And following is the code of "findPropertyDefByName" method:
// SOURCE CODE
public PropertyDef findPropertyDefByName(String propertyName) {
Extent propertyExtent = pm.getExtent(PropertyDef.class, true);
String filter = "name == propertyName";
Query q = pm.newQuery(propertyExtent, filter);
q.declareParameters("java.lang.String propertyName");
Collection c = (Collection) q.execute(propertyName);
int size = c.size();
if (size == 0) {
return null;
if (size > 1) {
// bad exception type
if (logger.isWarnEnabled()) {
Iterator iter = c.iterator();
while (iter.hasNext()) {
Object obj = iter.next();
logger.warn("result=" + obj);
throw new RuntimeException(
"Assertion of Uniqueness of propertyName failed");
PropertyDef pdef = (PropertyDef) c.iterator().next();
q.closeAll();
propertyExtent.closeAll();
return pdef;
The transaction is started and committed outside of this call.
Hope this helps you understanding my problem, and Thanks a lot!
cheers,
Tao
Steve Kim wrote:
Can you post or send me a test case or the applicable portion of the code?

Not able to start Managed server using nohup command and failed to authenticate weblogic user

Hi,
I stopped weblogic Admin server, managed server and opmnctl. and restarted Admin server successfully but I'm able to start managed start without nohup command. if I use nohup command then it's not able to get authenticate and faild to start managed server. I created boot.property file with weblogic user name and password still not working. is there anyother way to suppy login credentials for managed server?
how can I supply login credentials in below command?
nohup ./startManagedWebLogic.sh bi_server1 t3://machine:7001 > bis1_startup.log &
Appreciate you for your help
Thanks
Jay.

/app/obiee_11g/Oracle_BI1/jdk/bin/java -server -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics -Dweblogic.Name=bi_server1 -Djava.security.policy=/app/obiee_11g/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/app/obiee_11g/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/app/obiee_11g/wlserver_10.3 -Dwls.home=/app/obiee_11g/wlserver_10.3/server -Dweblogic.home=/app/obiee_11g/wlserver_10.3/server -Dcommon.components.home=/app/obiee_11g/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/app/obiee_11g/user_projects/domains/bifoundation_domain -Djrockit.optfile=/app/obiee_11g/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/servers/bi_server1 -Doracle.domain.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/carml -Digf.arisidstack.home=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/app/obiee_11g/oracle_common/modules/oracle.ossoiap_11.1.1,/app/obiee_11g/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -DHYPERION_HOME=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=/app/obiee_11g/Oracle_BI1 -DEPM_REG_PROPERTIES_PATH=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Depm.useApplicationContextId=false -Doracle.biee.search.bisearchproperties=/app/obiee_11g/Oracle_BI1/bifoundation/jee/BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enableJSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.services.BISearchServiceConfiguration -Dxdo.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/bipublisher -DXDO_FONT_DIR=/app/obiee_11g/Oracle_BI1/common/fonts -Drtd.instanceName=RTD_bi_server1 -Dem.oracle.home=/app/obiee_11g/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=01scqabi01.natusmed.natus.com:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/app/obiee_11g/patch_wls1035/profiles/default/sysext_manifest_classpath weblogic.Server
<Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 17, 2013 12:24:01 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
<Nov 17, 2013 12:24:07 AM PST> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<Nov 17, 2013 12:24:07 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Nov 17, 2013 12:24:09 AM PST> <Error> <Configuration Management> <BEA-150021> <The admin server failed to authenticate the identity of the user starting the managed server. The reason for the error is .>
<Nov 17, 2013 12:24:09 AM PST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://01scqabi01.natusmed.natus.com:7001.>
<Nov 17, 2013 12:24:09 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Nov 17, 2013 12:24:09 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 17, 2013 12:24:09 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 17, 2013 12:24:09 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
<Nov 17, 2013 12:24:19 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 17, 2013 12:24:20 AM PST> <Critical> <Security> <BEA-090403> <Authentication for user denied>
<Nov 17, 2013 12:24:20 AM PST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Nov 17, 2013 12:24:20 AM PST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Unable to remove login items (Revert after reboot) I am having issues and permanent encounter in having my removed login items reappearing after reboot. Here's the steps I have taken: 1) Open Setting, Account Preferences, Click under an account, Login i

Unable to remove login items (Revert after reboot) iOX10.5 iMac
I am having issues and permanent encounter in having my removed login items reappearing after reboot. I have very MANY of the same programs in 'open at Login accounts' eg: Messenger,Safari,Skype,Evernote,Dropbox,antivirus, but they are listed dozens of times. in this 'open at login' area.
Here's the steps I have taken:
1) Open Applications, Account Preferences, cluck my administrator acc, select program to delete, click on - and wait.
2) Remove some login items (with or without unlocking the lock, doesn't seem make a difference, tried both)
3) Login items are now fewer
4) Reboot
5) voila, the removed login items are still loaded and displayed in login item tab.
How does one solve this? Tried to google, but....

Strange,but try these 2...
AppDelete...
http://download.cnet.com/AppDelete/3000-2096_4-10614485.html
AppZapper...
http://www.appzapper.com/

Asha 302 & MfE: "Failed to authenticate with serve...

Hi,
I have Nokia Asha 302, fw v.14.78, MfE v.1.0.5.
Problem:
In most cases sync fails with error:
[ERROR] - Thu Oct 04 14:22:24 GMT+01:00 2012: Unexpected exception running SynchronizingState. Exception details: ay: Failed to authenticate with server, please check login details
You can see it on attached file.
Later appears screen width credential, I only press "Save" button and sync goes perfectly.
What is going on?
Additionally I've reviewed log file and I found these errors:
[ERROR] - Thu Oct 04 14:09:55 GMT+01:00 2012: Unexpected exception java.io.IOException: 40-Error in HTTP operation
[ERROR] - Thu Oct 04 14:11:03 GMT+01:00 2012: Error in getActiveIdleSummary. Exception details: java.lang.NullPointerException
[ERROR] - Thu Oct 04 14:11:32 GMT+01:00 2012: Error folder may not be null in SyncingCollectionFactory::borrowCollection destroying syncing collection for folder null
[ERROR] - Thu Oct 04 14:12:48 GMT+01:00 2012: Unexpected exception running CheckingPimChangesState.. Exception details: java.lang.IllegalStateException: store with key is not being reference counted in SyncingCollectionFactory::returnCollection
And there is also one truncated (message ends just with "t" letter):
[DEBUG] - Thu Oct 04 14:22:24 GMT+01:00 2012: Response message: Unauthorized ( The server requires authorization t
Please help me, I've 20 pieces of this phone in company and all with the same error
BR,
Attachments:
1.png ‏316 KB

any idea? I have the same problem without solution.

[SOLVED] Can't push to github (openssh-askpass fails to authenticate)

Greetings
I am having trouble pushing to github. I have added my public key to github
and checked that it works using
ssh -T [email protected]
When I try to use git to do a git push origin master I get a password prompt
dialog from openssh-askpass. I tried removing openssh-askpass but it seems
there is not fallback as I get an error of it missing.
There are two dialogs that pop up and I think they don't do the same thing
even though they both ask the same thing viz "enter your ssh passphrase"
I think the first one is actually asking for my username and the second one
is the passphrase. I have tried entering "git" as a username, my github
username and my passphrase as instructed and this all fails to authenticate.
I also can't find where the logs are for openssh. I did
tail -f /var/log/*
and nothing changes while try to login.
Is there a configuration for git to use openssh-askpass which was added
that I missed?
Which logs should I be looking at?
Last edited by lunamystry (2012-09-07 12:26:49)

This is my solution which seems to work:
After web searching the error I got, I found that there is an environment
variable GIT_ASKPASS and SSH_ASKPASS which launch whatever you tell
them to get the passphrase.
GIT_ASKPASS is not set by default and git calls SSH_ASKPASS instead.
One of them has to be set otherwise git (and I assume ssh if SSH_ASKPASS
is not set) will not use the passphrase but will prompt for the password.
The password in my case was the github password. I installed ksshaskpass
because I am on KDE and that removed ssh_askpass and integrates with
KWallet. Here are the commands I used in case the above was not clear:
export SSH_ASKPASS=""
sudo pacman -S ksshaskpass
export GIT_ASKPASS="/usr/bin/ksshaskpass"
cd Projects/Scripts/
git push origin master
You obviously don't need the last two commands.

Failed to authenticate & Unable to synchronize login time

Similar Messages

Maybe you are looking for