Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

Similar Messages

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

500 Internal Server Error while calling Reports 10g

I am using standalone forms and report services. I am getting intermittently 500 Internal Server Error while calling Reports 10g.

500 Internal error is a generic error and it could be due to multiple reasons like misconfiguration or the dearth of the resources.

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

Error while executing report from Query designer

Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
Mohan

Hi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh

Getting error while generating report from Siebel (Siebel/BI Publisher)

Dear,
I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
But now I am facing two issues,
I am getting error "Unauthorized access, Please contact the administrator." when I open report on BIP which I have uploaded from siebel.
When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
(httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
(httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
(soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException' for operation 'runReport' exists in SOAP message.
(outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
Invalid User Name and Password for BIP Server
(xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
(xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
(bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Please help to resolve this issue.
Regards,
Soahil

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

Error while migrating reports from XI3.1 to BI4.0

Hi,
I have converted deski report into webi report using report conversion tool and i am trying to migrate the converted report from XI 3.1 to BI 4.0. I am getting 'Error:INF' while doing this. how to overcome this error while migration ?. any suggestions..
Regards,
Shanthakumar.

Hi,
could you please provice a little more information. Can you view the converted Reports in your XI 3.1 Environment? Are you trying to view the Reports as administrator in your BI4 Environment?
Regards
-Seb.

Error while creating report from BW SAP Query

Hi
While creating a report from BW SAP Query, I get the following error.
"An error occured while creating a report template.No error"
On opening the same query in BEx Analyser, i can see the fields and output.
Help me on this issue.
Thanks
Eswari.

Hello Garett,
I've the same problem and have tried now to get the data with MDX-Query. The error message below appears:
'No RFC-authorization for function group /Crystal/MDX for User ...'
So it seems to be a authorization problem. Which special authorization must be assigned to Crystal users in SAP BI?
Thank you for your help.
best regards
Oliver

Context Overflow Error while executing report from browser.

Hi All,
I am running one report from browser, the same report is running properly on backend.
But when I am running the same for long period (more than 2 months) it is giving me context overflow error.
I have also checked the value of parameter MaxCtxtSize on ITS and it is currently set to 5 MB.
Should I increased this value ??? ITS version is 6.20 - Standalone.
Pl guide me to solve this problem.
Regards,
Aditya.

Dear Edgar,
Thanks a lot.
Below is the error message reported in the file diagnostics.log.
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpttRuntimeError: Runtime error: Assignment to context failed
(context overflow)!
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpttRuntimeError: jump through trap...
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpioTraverseHtmlPP: PpttTraverseParseTree(D:\SAPMPS\config\..\IT1\templates\system\dm\generator.html) failed, rc=0x306
A 2009-02-03T09:12:24.039 [agate,sapdiag ] 00, s02748798, HtmgBuildHtmlPage: IntpDoInterpret (D:\SAPMPS\config\..\IT1\templates\system\dm\generator.html) failed, rc=0x2104
A 2009-02-03T09:12:24.039 [agate,sapxgdk ] 00, s02748798, ContAllocAligned: Allocating 52 bytes (16 of 5242880 bytes available) failed, no streaming supported. Consider bumping a container size (3) in the registry.
Pl help.
Regards,
Aditya.

Error while running report from Form. i am using Forms 10g.

dear all,
here is a problem when running the report from a fom. gives the pollowing error.
REP-110: Unable to open file 'f:\oracle\accano\gl\coa_list.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'f:\oracle\accano\gl\coa_list.rdf'.
i am using Forms 10g.
thanks
Muhammad Nadeem

See metalink doc id 215469.1
The purpose of this document is to:
- provide information on how to resolve the REP-110 error.
- give hints on how to troubleshoot problem.
- include a comprehensive summary of various scenarios which may
result in a REP-110 error

Internal server error when running report from form

i am getting the following error when I run a report from a form using 9i:
java.lang.NumberFormatException: mgb_5
this is my code:
DECLARE
repid REPORT_OBJECT;
vc_rep VARCHAR2(20);
vc_URL VARCHAR2(100);
vc_rep_job VARCHAR2(10);
BEGIN
repid := find_report_object('rep2');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'C:\uni\mdt\cw1\rep2.rdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'rep_mgb');
vc_rep := RUN_REPORT_OBJECT(repid);
vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||'?server='||get_report_object_property (repid,report_server);
web.show_document(vc_url, '_blank');
END;

Michael,
print out "vc_rep_job" to a message or alert to see if this contains a valid number. If this shows as a valid number try to manually type the access URL into a browser URL field. If this shows then you have a hidden character within your URL.
The PLSQL code looks okay.
Frank

REP - 300 Error while executing report from Application

Hi,
I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.

looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.

Java I/O Error while saving report from R/3 as Spreadsheet

Dear All,
We have integrated SAP R/3 with portal.
In Portal, I created an SAP Transaction iView for the Tcode LSO_RHXBUCH0. After Running the report, We tried to save the report by in spreadsheet format (excel). While clicking the "export" button in the transaction view, It throws I/O Error and we could not save the report generated from R/3.
Please help us to solve this issue.
Regards,
Eben Joyson

Dear Saito,
We are providing access to the production server through reverse proxy server, and so if I user SAP GUI as SAP GUI for Windows, It is unable to recognize the host name. We cannot provide the host ip directly since it is our production box.
Regards,
Eben Joyson

Error while publishing Service from Sender Agreement

Hello Experts,
I have Enterprise Service Scenario in which i am publishing Enterprise Service from Sender agreement (using SOAP Sender adapter).
When i am trying to publish this Enterprise Service i am getting below Error.
Adapter Engine XXXX for communication channel XXXX not registered in SLD.
Can someone please help me solve this error?
Thanks,
Hetal

Hi.
Pleas check the following threads
how to check adapter engine was registered in SLD or not?
No Adapter Registered for this channel
Regards
Lucho.

Failed to commit objects to server. Error while publishing reports from BW

Similar Messages

Maybe you are looking for