Failed to connect Apple TV using wifi error message 22

Appreciate if someone could guide me to solve my problem to connect my AppleTV to intenet via Wifi. I received error message "There was a problem connecting to the network, check your setting and try again (22)". Thanks

Hello aznan99,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
If you can see your Wi-Fi network, but you are unable to connect to it
Check for any obstructions and adjust the location of your router or Apple TV; also check for sources ofpotential interference.
Check the wireless security option of your Wi-Fi router.
If your Wi-Fi network uses a password, make sure you are entering it correctly.
Note: Apple TV cannot connect to networks that contain high (extended) or double-byte characters (Unicode) characters (such as Japanese, Korean, and Chinese) in the name or password.
If you are using WEP security, consider using WPA or WPA2 instead.
Temporarily disable wireless encryption or security on the Wi-Fi router to rule out encryption issues.
Note: Certain business and institutional Wi-Fi networks require special profiles to connect. See Additional Information below for assistance.
Verify that your Wi-Fi router is not using MAC address filtering or other security features that limit the number or types of devices that can connect to it.If you need to add the MAC address to the access list for the Wi-Fi router, the MAC address is listed as the Wi-Fi address in Settings > General > About.
Update your Wi-Fi router to the latest firmware.For an AirPort Base Station, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
If after attempting the above steps, your Apple TV is still unable to connect to your Wi-Fi network:
Restart your Apple TV: Choose Settings > General > Restart.
If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and test again.
Best of luck,
Mario

Similar Messages

I've downloaded acrobat XI Pro, installed it, but get "Acrobat failed to connect to a DDE server error message.

I've downloaded acrobat XI Pro, installed it, but get "Acrobat failed to connect to a DDE server error message.

Hi Bruce,
Please open registry by typing "regedit" in the Run window (Windows + R)
Now, navigate to "HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and changing the Key from "AcroviewA10" to "AcroviewR10.
Now, try launching Acrobat and let me know if the issue resolves.
Regards,
Anubha

IPod 5th is not connected to Internet using wifi

Hi.
I bought iPod 5th generation and it can't connect it to the Internet using Wifi. Message appears saying"Network Connection Error, you wifi is not providing Internet connetion", while I have other 2 iPhones and iPod 4th connected without any problem. Any help is appreciated.
Thanks
Wail

Does the iPod connect to other networks?
Did it connect to this network before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

I can't connect to AppStore using wifi (iPhone - iOS6)...HELP!

That's incredible... from one week I can't connect to AppStore using WIFI anymore... just using 3G.
So I don't download apps anymore!
How can be that possible?? Anyother had the same problem??
I've already reset conncetivity setting... and it doesn't still work!
Please HELP!
thanks a lot

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

ARC1: Heartbeat failed to connect to standby 'TEST10'. Error is 1031.

Hi Every one,
I m getting this error in alert log.
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'xxxx'
ORA-01031: insufficient privileges
*** 2003-11-30 18:55:30.984 49871 kcrr.c
ARC1: Heartbeat failed to connect to standby 'xxxx'. Error is 1031.
We tried to setup on same machine as well as on separate machine, but in both cases getting the same error.
Please guide me what should i do.
Thanks
Nadeem

If you are running oracle 10g, then, the following would be helpful.
Cause
The parameter DB_ALLOWED_LOGON_VERSION has not been set in the remote database.
DB_ALLOWED_LOGON_VERSION is a new parameter introduced in 10g that allows the DBA to explicitly determine which authentication protocols are allowed by the client or database.
The value specified is the earliest client version level supported by this database.
When clients earlier than the specified version attempt to connect, authentication will fail.
Solution
In the init.ora of the remote (Downstream capture) database, set the following : db_allowed_logon_version=10
Note: Bug 2981553, which is implemented in 10.1.0.2, removes the parameter db_allowed_logon_version. This is replaced by the sqlnet.ora parameter called sqlnet_allowed_logon_version.
Jaffar

Oracle 11G DG ,ERROR"PING[ARC2]: Heartbeat failed to connect to standby 'wnadsdy'. Error is 1033."

主库一直报错，提示如下： Error 1033 received logging on to the standby FAL[server, ARC0]: Error 1033 creating remote archivelog file 'wnadsdy' FAL[server, ARC0]: FAL archive failed, see trace file. Error 1033 received logging on to the standby PING[ARC2]: Heartbeat failed to connect to standby 'wnadsdy'. Error is 1033. tnsping 可以Ping 到备库 wnadsdy primary ip 172.31.0.41 standby ip 1721.31.0.112 primary db initwnad.ora wnad.__db_cache_size=687865856 wnad.__java_pool_size=16777216 wnad.__large_pool_size=33554432 wnad.__oracle_base='/opr/oracle'#ORACLE_BASE set from environment wnad.__pga_aggregate_target=671088640 wnad.__sga_target=989855744 wnad.__shared_io_pool_size=0 wnad.__shared_pool_size=234881024 wnad.__streams_pool_size=0 *.audit_file_dest='/opr/oracle/admin/wnad/adump' *.audit_trail='db' *.compatible='11.2.0.4.0' *.control_files='/opr/oracle/wnad/control01.ctl','/opr/oracle/fast_recovery_area/wnad/control02.ctl' *.db_block_size=8192 *.db_domain='' *.db_name='wnad' *.db_recovery_file_dest='/opr/oracle/fast_recovery_area' *.db_recovery_file_dest_size=10737418240 *.diagnostic_dest='/opr/oracle' *.dispatchers='(PROTOCOL=TCP) (SERVICE=wnadXDB)' *.log_archive_dest_1='location=/opr/oracle/wnad/archive' *.log_archive_dest_2='SERVICE=wnadsdy' *.memory_target=1656750080 *.open_cursors=300 *.processes=150 *.remote_login_passwordfile='EXCLUSIVE' *.standby_file_management='AUTO' *.undo_tablespace='UNDOTBS1' listener.ora LISTENER= (DESCRIPTION= (ADDRESS_LIST= (ADDRESS=(PROTOCOL=TCP)(HOST=oracle-test)(PORT=1521)) ) ) SID_LIST_LISTENER= (SID_LIST= (SID_DESC= (SID_NAME=wnad) (ORACLE_HOME=/opr/oracle/product/11.2.0/db_1) (GLOBAL_DBNAME=wnad) ) ) tnsnames.ora WNAD= (DESCRIPTION= (ADDRESS_LIST= (ADDRESS=(PROTOCOL=TCP)(HOST=oracle-test)(PORT=1521)) ) (CONNECT_DATA= (SERVER = DEDICATED) (SERVICE_NAME=wnad) ) ) wnadsdy= (DESCRIPTION= (ADDRESS_LIST= (ADDRESS=(PROTOCOL=TCP)(HOST=oracle-test2)(PORT=1521)) ) (CONNECT_DATA= (SERVER = DEDICATED) (SERVICE_NAME=wnad) ) ) standby db initwnad.ora wnad.__db_cache_size=687865856 wnad.__java_pool_size=16777216 wnad.__large_pool_size=33554432 wnad.__oracle_base='/opr/oracle'#ORACLE_BASE set from environment wnad.__pga_aggregate_target=671088640 wnad.__sga_target=989855744 wnad.__shared_io_pool_size=0 wnad.__shared_pool_size=234881024 wnad.__streams_pool_size=0 *.audit_file_dest='/opr/oracle/admin/wnad/adump' *.audit_trail='db' *.compatible='11.2.0.4.0' *.control_files='/opr/oracle/wnad/control01.ctl','/opr/oracle/fast_recovery_area/wnad/control02.ctl' *.db_block_size=8192 *.db_domain='' *.db_name='wnad' *.diagnostic_dest='/opr/oracle' *.dispatchers='(PROTOCOL=TCP) (SERVICE=wnadXDB)' *.log_archive_dest_1='location=/opr/oracle/wnad/archive' *.memory_target=1656750080 *.open_cursors=300 *.processes=150 *.remote_login_passwordfile='EXCLUSIVE' *.standby_file_management='AUTO' *.undo_tablespace='UNDOTBS1' listener.ora LISTENER= (DESCRIPTION= (ADDRESS_LIST= (ADDRESS=(PROTOCOL=TCP)(HOST=oracle-test2)(PORT=1521)) ) ) SID_LIST_LISTENER= (SID_LIST= (SID_DESC= (SID_NAME=wnad) (ORACLE_HOME=/opr/oracle/product/11.2.0/db_1) (GLOBAL_DBNAME=wnad) ) ) tnsnames.ora wnad= (DESCRIPTION= (ADDRESS_LIST= (ADDRESS=(PROTOCOL=TCP)(HOST=oracle-test)(PORT=1521)) ) (CONNECT_DATA= (SERVER = DEDICATED) (SERVICE_NAME=wnad) ) ) wnadsdy= (DESCRIPTION= (ADDRESS_LIST= (ADDRESS=(PROTOCOL=TCP)(HOST=oracle-test2)(PORT=1521)) ) (CONNECT_DATA= (SERVER = DEDICATED) (SERVICE_NAME=wnad) ) )

Hello;
Very difficult to read your post.
If your standby is in "recovery - mount" a 1033 is normal assuming you are trying to shut down the standby.
Otherwise try this query on the standby:
select process, client_process, sequence#, status from V$managed_standby;
If there is a MRP or a MRP0 process, the database is performing managed recovery. Otherwise It's not ready and you may have found your cause.
Best Regards
mseberg

Hi I'm having issue to sign in using iPod touch cause it keep showing check network connection as I use wifi.. Can please hel me . Thanks

Hi I'm having issue to sign in using iPod touch cause it keep showing check network connection as I use wifi.. Can please hel me . Thanks

Sign in where?
Maybe:
FaceTime, Game Center, Messages: Troubleshooting sign in issues

Own Photoshop CS5.1 installed on two iMacs, when using second iMac, rarely used,got error message ~"not authorized to use program" on this second iMac I have two accounts one in my name one in my wife's both share photoshop...was in my wife's account when

Own Photoshop CS5.1 installed on two iMacs, when using second iMac, rarely used,got error message ~"not authorized to use program" on this second iMac I have two accounts one in my name one in my wife's both share photoshop...was in my wife's account when I got message...never happened on my primary iMac on which I have my own account and one for guest account that doesn't share photoshop....what is wrong..am allowed to install program on two machines?

Customer Care would have the authority to reset activations. We are basically users such as yourself and can't do this.
Contact Customer Care
Gene

Role Provisioning failed for System(s) : Connector Name . Error Message : malformedRequest

Hi Everyone we are facing following issue in GRC-SAC-SAE 5.3_16.3. So far our CUP was connected to Enterprize portal (7.01) and auto provisioning for group to users worked. However now it is not working with below error.
Role Provisioning failed for System(s) : <Connector Name>. Error Message :
malformedRequest
Failed request now
Successful request used to provision
Regards,
Arpan Paik

Arpan,
We used to get those "malformed request" errors. We dealt with them by requesting the portal to be re-booted during the weekend maintenance window, making the portal security changes manually, cancelling the CUP request and notifying the requester. It's not a great solution, I know, but it was all we could come up with at the time. Then they upgraded the portal to NW 7.31, which is incompatible with GRC 5.3, and we have to do everything manually, so our situation went from bad to worse. Good luck!
Cheers,
Gretchen

When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

First thing i would try is to use another cable if available.

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!

Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has mult

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR

I resolved the issue.
The problem is indeed a permissions issue with the Adobe Application Support folder.
First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
Next launch the Terminal application.
At the command line, paste the following command line: chflags nohidden ~/Library/
Go to /Users/youruserid/Library/Application Support/Adobe
Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
Problem solved. RR

HT201398 FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

Adjusting the date or time didn't do anything for me either. I'm guessing my two options are to either do the full restore from scratch and not apply any backup ... Or possibly wait for an iOS update that might resolve this issue.
I'm not that much of an avid twitter user that I need it implemented natively in all my devices - so for now I'll probably value all my game save data, internal settings in apps e.t.c. over that functionality (or over the amount of work it would be to get me back to where I am now after a full wipe). I'll see what happens after the next iOS delta update. I'll reevaluate the full wipe after that if the issue hasn't been resolved

Failed to connect Apple TV using wifi error message 22

Similar Messages

Maybe you are looking for