Failed to connect Oracle server from a x86 machine

Hi everyone,
Could you please help me take a look at the error below?
error info: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater
I just download the Oracle client (please refer to the url below) to my x86 machine, and set the machine following the installation steps, but failed to get the error above.
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
Could you please tell me how to fix that error?
your help will be very appreciated :-)
Thanks
Lindsay

By examining it and reading all possible stuff...
http://www.oracle.com/technology/tech/oci/instantclient/index.html has:
OCI, OCCI, Pro*C, ODBC, and JDBC applications work without modification
You'll have to read that as: only those applications will work.
The "Database Client Installation Guide" says in chapter 1.3:
Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications.
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15662/install_overview.htm#sthref23
If you have Metalink access, Note 565000.1 will tell you everything in much more detail.
This Note also tells me that .NET and OLEDB providers are included in Instant Client 11.1.0.6 and higher, so you might consider using that. It will allow you to connect to a 10g database.
Yours,
Laurenz Albe

Similar Messages

Failed to connect SQL Server from Web Analysis

Hi,
I am not able to connect RDBMS-SQL Server 2000 SP3 from Web Analysis 9.3. I have installed JDBC driver for SQL Server 2000 also. Also defined CLASSPATH environmental variable for MSSQLSERVER.jar file. I am creating JDBC drive as: -
Driver Type: Microsoft SQL Server
Database Connection String:
jdbc:microsoft:sqlserver://CNOIA258:1433;DatabaseName=biplus;SelectMethod=cursor
JDBC User: biplus
JDBC: biplus
I am getting error "Getting Connection Failed"
Please suggest any solution to resolve this issue.
Regards.
Atul K

Hi Atul
I think you need to amend the standard strings as follows:
hyperion.jdbc.sqlserver.SQLServerDriver
jdbc:hyperion:sqlserver://CNOIA258:1433;DatabaseName=biplus;SelectMethod=cursor
This has always worked for me, hope this helps
Stuart
www.analitica.co.uk

[Solved]Pacman fails to connect to server in Arch Virtual Machine

Hi
I've just installed arch 2008.06 in VMWare Workstation 6.04 on Vista Business x64. The setup all went fine and i am now logged into my system, but Pacman refuses to connect to anything. i have tried Bridged networking and NAT to no avail. whenever i run 'pacman -Syy' i get the message
"error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g.,file not found, no access)"
followed by the same message for each mirror in my mirrorlist, and then again for 'extra.db.tar.gz' and 'community.db.tar.gz', and then 'failed to synchronise any databases' at the end.
I have tried pinging google, as well as several of the arch mirrors and they all work fine. wget also seems to work fine, it's just pacman that's not working.
Anyone have any suggestions?
Last edited by henrypootel (2008-09-12 01:53:56)

That's what i thought too so i switched off the Vista firewall and still no luck. I am behind a hardware firewall here at work, but it shouldn't be blocking FTP traffic. i use FTP in windows all the time.
Just tried downloading a file using wget and it worked fine.
Last edited by henrypootel (2008-09-11 03:45:29)

Connecting to remote oracle server from asp

Hi All
How can I access remote oracle server from asp?. I'm using the following connection string.
" Provider=MS Remote;Remote Provider=MSDAORA;Data Source=XYZ;Remote Server=http://DBServersIP;User Id=id;Password=pw"
Both the web server and DB server has oracle client. I can tnsping, connect using sql * plus from the webserver.
But when I try to do simple connection & query , I get the following error.
" Microsoft ADO/RDS(0x80072EFD)
Internet Client Error: Cannot Connect to Server.
All the permission settings are given correctly (after referring Microsoft & Oracle websites)
Can someone throw some links or help.?
Your replies much appreciated.
Thank you
Arum

why do you have http://DBServersIP as the remote server?
Your connection string should look like:
"Driver={Microsoft ODBC for Oracle};Server=MY_SID;Uid=my_user;Pwd=my_pwd;"
There are other variations, but none of them should include HTTP anywhere.

Connect to 10g oracle server from 9i client

Hi All,
Is it possible to connect to 10g oracle server from 9i client or Should i install 10g client on my machine?
Regards,
Seena

Depend of what releases you are talking about.
The client 9iR1 has never been supported against a 10gR2 server.
Find out more in the metalink note : Client / Server / Interoperability Support Between Different Oracle Versions - 207303.1
Nicolas.

Multiple errors from MsiInstaller with event id 1015 and text "Failed to connect to server. Error: 0x80070005"

Hi,
Every night I get a lot of warnings in the event log from MsiInstaller with event ID 1015 and text "Failed to connect to server. Error: 0x80070005". They are always followed by a new event 1035. Example:
Event 1015, MsiInstaller (Warning)
Failed to connect to server. Error: 0x80070005
Event 1035, MsiInstaller (Information)
Windows Installer reconfigured the product. Product Name: Microsoft Excel Mobile Viewer Components. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
I probably get around 50 of these each night, and the 1035 events are all related to various SharePoint components. The user in all cases is the sharepoint farm account.
I use SharePoint 2010 enterprise in a farm install on one virtual server. I have a private domain, and the database is on a separate server.
Does anyone have any idea why this happens? Other than the error in the event log I cannot see any issues with my installation. I have searched for this error and seen it related to user profile synchronisation, but profile sync is working fine for me. I
installed using the Technet guide and the user profile sync guide at
http://www.harbar.net/articles/sp2010ups.aspx
Thanks,
Mikael

Hey Trevor. Thanks. I wasn't sure which method it was failing on although I understood it was the Windows Installer Service that was getting called by the job. There are three things that are still interesting to me though:
The job succeeds anyway. How? Does it just continue to run the rest of its checks but fails on this one? If it doesn't fail on this one, why not? If it does fail here, but then continues, should we be concerned about the quality of the data in Manage Patch
Status?
Or... does it somehow succeed once it uses the DCOM rights which appear to clear the 10016 errors? What I've never been able to reconcile with these warnings is that we've granted DCOM rights to launch and activate the Windows Installer Service and
that definitely seems to make a difference to success or failure of the job - so why doesn't it clear these warnings?
Why does granting the file system permissions clear the FIM version of this job's warnings, but not for the Product Version Job? This is particularly vexing since granting the DCOM rights appears to resolve the 10016 errors in exactly the same manner for
both jobs.
All of this has led me to believe that there were missing permissions somewhere, probably on the file system, but I just haven't had any luck pinning that down. One reason why I continued to pursue a solution to this is that the job doesn't actually try
to install anything, it's just trying to use the Windows Installer Service to query the installed version, and the DCOM rights should be sufficient to invoke the service. But getting much further than this has proven pretty difficult since I'm not a dev and
I've kind of pushed my limited reflection skills and understanding of the Windows Installer Service to the limit. If anyone can chip in and make some progress from this point, it'd be great to join forces!

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

Change your settings in Sharing preferences, for one, and remove the server out of the Finder's sidebar. Obviously, this is the result of transfering all your other computer's preferences to your new computer.

Error in connecting Oracle Database from JAVA application!!!

Hi,
I am trying to connect to the Oracle11g database server from the client machine using JAVA eclipse. I have installed the oracle client in the client machine. Once i try to execute the below code it was throwing below error:
public class Dbconnect {
public static void main (String[] args)throws Exception {
try {
Class.forName ("oracle.jdbc.driver.OracleDriver");
String connectString = "jdbc:oracle:thin:@<IP Address>:1521:orcl";
OracleDriver drivers = new OracleDriver();
System.out.println(drivers);
Connection connection = null;
connection = (OracleConnection)DriverManager.getConnection(connectString,"ADMIN", "admin");
System.out.println(connection);
System.out.println("Connected to the database");
Error:
java.sql.SQLException: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at DBConnect.main(DBConnect.java:15)
Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
     at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
     at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
     at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
     at oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
     at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
     ... 7 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
     at oracle.net.nt.ConnOption.connect(ConnOption.java:123)
     at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
     ... 12 more
I am unable to connect using sqlplus as well ORA-12560: TNS:protocol adapter error
Please advise me on how to resolve this issue..
Thanks

Prabhu wrote:
We are not able to connect from SQLplus as we.. If i issue this command in Sqlplus from client machine 'sqlplus admin/admin@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<Ip Adddress>)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))'' it was throwing the below error.
Error: ORA-12541: TNS:no listener
Do i need add get any config details in the client machine..
Could please tell me what is the general procedure to access the DB server from client machine..on DB Server issue following OS commands
lsnrctl start
lsnrctl status
lsnrctl service
COPT commands & results, then PASTE all back here

Publishing error (failed to connect to server)

Using X5, I am trying to publish to our help server (web help
pro), but getting a message in the output window "Warining: Failed
to publish to 'yourserver'. reason: Failed to connect to server.
All my permissions are set up as described here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=rb_e01
So... I ran a packet sniffer and then tried to publish
again... and saw that the publisher attempts to access
http://yourserver/robo/robo.dll?mgr=sys&cmd=svr
When I try to access this address in a browser, I get a 401 error
with the message below.
+----------------------------------------------------------------------------------------- ----
|Server: unauthorized
|Unauthorized due to ACL on resource
|
|This error indicates that the credentials passed by the
client do not have access to the particular resource on the server.
This |resource could be either the page or file listed in the
address line of the client, or it could be another file on the
server that is |needed to process the file listed on the address
line of the client.
|
|Please make a note of the entire address you were trying to
access and then contact the Web server's administrator to verify
|that you have permission to access the requested resource.
+--------------------------------------------------------------------------------------
However, if I try to access that address _on_ the server (
http://localhost/....) I get some
nice XML:
+--------------------------------------------------------------------------
|
|<?xml version="1.0" ?>
|- <mrs xmlns="
http://www.ehelp.com/mrs/xml/serverinfo/">
|- <head>
| <url host="localhost" ip="127.0.0.1" version="4.00.083"
/>
| <publish type="httppost"
script="/robo/bin/WPSHost.dll?PUBLISH" />
| <serverapi url="
http://localhost/RoboAPI.asp"
/>
| <admin url="
http://localhost/robo/Admin/"
/>
| <projects url="
http://localhost/robo/Projects/"
type="httppost" script="/robo/bin/WPSHost.dll?PUBLISH" />
| <documents url="
http://localhost/robo/Documents/"
/>
| <reports url="
http://localhost/robo/Reports/"
/>
| </head>
| </mrs>
+--------------------------------------------------------------------------
I can not seem to figure out what ACL is incorrect. I tried
running process monitor (from winternals), and did not see anything
helpful. The IIS www worker process seems to access all the robo
files/registry without error.
Has anyone else had this problem? Can I get some guidance on
how to resolve? We are about to purchase support incidents, but the
sooner I can resolve, the better.
Any help appreciated. thanks,
ajperrins

I'm afraid I won't be of much help except to say that this is
a classic permissions issue. I have to assume you've checked and
double-checked the link referred to in your post (which is a good
one).
You might also try this technote:
Publishing
to RoboEngine
In helping others troubleshoot this, it sometimes turns out
that there are firewall issues that are not obvious especially if
you are in a large organization crossing many domains from author
to server. Are you the ultimate "server admin" or is there someone
in your organization's network admnistration who could help resolve
the permission issue?
Sorry I can't be of immediate help.
john

HTTP/1.1 302 error while connecting UCM server from ODC Commit profile

Hi Team,
We are getting HTTP/1.1 302 error while connecting UCM server from ODC Commit profile.
Error Code
oracle.stellent.ridc.protocol.http.HttpProtocolException: Http/1.1 302
Please note that target UCM is SSO enabled.
Regards,
Piyush

I am having a similar problem.
Have you been able to figure out what the issue is and/or what the library location should be?

Sync always fails to connect to server with no reason

On two of my computers (both Macs running 10.6.7, one a MacBook Air and one an older iMac), Sync fails, saying "failed to connect to server"
When I try again (and again, and again...) it results in the same message. It has synced successfully in the past, but has not in more than a week.
I can't figure out how to get it to sync or even how to get more information about the issue.
Any help, ideas or suggestions - including questions clarifying or detailing the issue - are welcome.
Thank you!!

If Oracle reports error about Net8 configuration, that means -
you're trying to use "thick" JDBC driver, though usual way
is to use "thin" driver instead. You have to make corrections
in your connect url like:
"jdbc:oracle:thin:@<host>:<port>:<sid>"
^^^^
look here-----|
Hope this will help
Paul

FRM-92050: Failed to connect to Server: /forms/lservlet-1 coming thru LBR

Hi,
Our EBS setup is as follows,
R12.1.1,
10g DB, 10.2.0.4 (patchset)
Sun Solaris 10 64 bit
Two node Apps Tier (AppServer1 and AppServer2) in a shared APPL_TOP.
and Two node RAC Database Tier (DBNode1 and DBNode2)
Highly secured and firewall environments.
We configured EBS R12 and we were able to login and launch forms , Submit conncurrent jobs and everythings worked fine.
http://hostname.domainname:8000
Now , our requirement is that all the users would be accessing our EBS through https and the flow is as follows,
Step1:
User => https://lbrname.domainname:443
here lbrname is our Load Balancer name. Here the request is identified as EBS request and LBR forwards that URL to our reverse proxy server
Step2:
Our reverse proxy server is Sun http web server 7 update 5. It converts it to http://hostname.domainname:8000 and offloads it to the apps tier.
We followed metalink note 380489.1 - Using Load-Balancers with Oracle E-Business Suite Release 12 to configure our EBS with load balancer .
(Section 2.1: Using Hardware Load Balancers with Single Web Entry Point).
After configuring we are able to login to the EBS URL using https://lbrname.domainname:443.
Now here is our problem,
When trying to launch any form , it gives the below error.
FRM-92050: Failed to connect to Server: /forms/lservlet-1
not sure how to proceed. Looked at google , metalink but not getting anywhere.
Can you please give some pointers as how to solve this problem ?
Thanks,
Sasi

Hi Helios,
Thank you very much for your time.
Metalink ID 438522.1 & 367614.1 doesnt apply to our environment.
I had looked at 470890.1 and it looked like we are ok but I'm going to double check on that.
FRM-92050: Failed to connect to Server: /forms/lservlet:-1 http://ID 470890.1
On the laodbalancer (Big IP) i need to check with our network team.
FRM-92050: Failed To Connect To Server: /forms/lservlet:-1 http://ID 793409.1
Thanks again.
Sasi

Failed to connect to server "%MACHINENAME%

Hi;
I have problem with opening report with crystal report 2013 EOM , i got this strange exception I have google it and didnt find any helpful data
"Failed to connect to server "%MACHINENAME%".Error returned from Windows Sockets API getaddrinfo: 11001."
i am using this code
tempFilePath += "Evaluators Trend.rpt";
            ReportClientDocumentClass crystalReport = new ReportClientDocumentClass();
            object path = (object)tempFilePath;
            crystalReport.Open(ref path, 0);
can you please advice how can i avoid this issue .
Thanks ,
Fade Ismaeel

Hi,
Could you try below code and see if you face the same issue?
CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument boReportClientDocument;
boReportClientDocument= new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
boReportClientDocument.ReportAppServer = System.Environment.MachineName;
object path= @"C:\Reports\World Sales Report.rpt";
boReportClientDocument.Open(ref path, 0);
CrystalReportViewer1.ReportSource= boReportClientDocument;
You would need to set the RAS server which will be processing your request. Above code works when executed on the same machine as CRSE is installed. You could also use the IP address of the machine (instead of "System.Environment.MachineName") where the RAS is installed.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Hyperion Financial Reporting Studio "Failed to Connect to Server"

One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
We've searched help documentation and other threads in this forum but haven't been able to find what we need.
We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
Thanks.

We had the same issue after installing the Financial Reporting Studio client.
If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem.

How to connect oracle database from tuxedo

Hi,
How to connect oracle database from tuxedo.
If any one can help me.
Regards,

it depends on configuration your going to choose, there are two ways--
- Using X/Open standards, for this
you have to make an entry of Resource manager in $TUXDIR/udataobj/RM file.
Then in UBBConfig file in GROUPS section u have to set Openinfo.
It also depend on which database you are going to use.
In your service now you need to call tpopen() API from tpsvrinit() function.
- Other possibility is, take an implicit connection using Pro*C or Pro*Cobol whatever platform you are using.
EXEC SQL Connect ...

Failed to connect Oracle server from a x86 machine

Similar Messages

Maybe you are looking for