Failed to connect to /@   Check the password in the user"s Creation Options

I am using the migration workbench to migrate to a new database. I was able to run this migration successfully to transfer the table data only. Now when I try to run this same configuration a second time to transfer over the indexes, I am getting this error. I am migrating from sybase, if it makes any difference. I have gone to the user Creation Options and retyped passwords to see if that helped, but it did not make a difference.
Does anyone have any ideas what is going on here?

Hi there,
There is a bug here (Failed to connect when migrating schema objects) which will be fixed in the next release of the workbench in SQL Developer.

Similar Messages

  • How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?

    HI,
    How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?
    could you please help on the above?

    Hello Sudhir muvva,
    Just to be sure, the default Web Analytics reports don't meet your requirements?
    http://blogs.msdn.com/b/ecm/archive/2010/03/21/introducing-web-analytics-in-sharepoint-2010.aspx
    Does reports have subjects like top pages and number of page views.
    - Dennis | Netherlands | Blog |
    Twitter

  • Check the user's entry from query selection screen

    Hi,
    Is there a way to check the user's entry at the selection screen? I created an exit variable and did some code to default a date to the selection screen. What if the user enters some other date, and I would want to check the value of this entry, where would I do this?
    Thanks,
    RT

    RT,
    This can easily be done. You can read the variable after the user has entered some different value.
    I_STEP = 2.
    Read table i_t_var_range with key vnam =<your variable name >
    Hope it helps.
    Thx,
    Soumya

  • How check the user roles in Business Partner edition screen?

    Hello Masters,
    I'm having a little problem figuring out how to check the user roles to allow modification in some fields.
    At the 'Manage Organizational Data' screen ('Manage Business Partners' -> Business Partner Data -> edit). I need to check the user roles to let him change the 'Tax Numbers' values. The values can be changed only if the user is a administrator; otherwise it must only show the value.
    I checked the HTML Template and found where I can restrict this edition option, but the problem is that I don't know how to check the user roles here. Maybe there is a function to do this?
    Any ideas of how I can do it? Is there any magical BAdI to check this?
    Thanks in advance,
    José Omar

    Hi José Omar,
    there is no BADI for this...
    You have to change the standard code to display only tax data if the SY-UNAME does not have correct role.
    You can retrieve user roles with BAPI_USER_GET_DETAIL, or access directly the activity groups table.
    Rgds
    Christophe

  • Where to check the user id that who deleted the process chain

    Dear Gurus,
         If the process chain is deleted accidentally, can we check the user id used to delete. Where can we see the logs/information about that.
    Regards
    Ram

    Hi Ram,
    When you delete something in BW/BI, a background job is assigned to the requested task.
    To check the same use Tcode SM37, provide details: Job name as BI_DEL*, user name as *, Job status as Finished, and the date or date range in which the process chaing was deleted. Then execute the request.
    It will show you all the jobs which were used to delete something in the BW/BI.
    Check the log of the request and you will get the required information.
    Cheers...
    Puneesh

  • I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library option and check the Selected Artist - on

    I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top,
    it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library
    option and check the Selected Artist … one.
    I have changed the Sync option to Manually sync, but that does not help.
    How can I change this to the second option?
    Thanks.

    There is a checkbox above those two options for how to sync.  It says Sync Music; it enables automatic syncing.  That box needs to be checked before you can select from the two options for how automatic syncing is performed.
    NOTE:  If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
    So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
    Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting).  Please post back with more details about your situation. 

  • I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!

    I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!

    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • How to check the user is using mobile to browse my website??

    Dear all,
    i am new in Java.Pls help!!i want to check the user is use what tools to browse my website...i mean if the user is using mobile to vist my website(eg:http://www.abc.com), it will rediect the mobile user to a webpage only for mobile user,otherwise,it will redirect to normal page for normal user(use browser such as ie,netscape)...
    how to do it? which function did i use?please give me some tips!!!
    Java baby , Frankie

    Check the User-Agent header of your request. Most phones will identify themselves through it.

  • How do i check the storage location creation date ......?

    pls guide me to check the storage location creation date ......?

    Hi Srinivas,
    If u have noted the request number that generated for the creation of Storage location, then u can see them in SE10 transaction by selecting your transport request number and go to log details.
    regards
    Anand.C

  • OS X 10.8.4 wifi says "connection failed", but connects anyway; cannot save password

    I am using OS X 10.8.4 that came with my MBP. When I connect to my home wifi that requires a WPA 2 password, it says "Connection Failed", but anyway connects to the internet. Also, my password is not being saved, and I need to enter it everytime.
    After reading several forums, I have already tried the following:
    1. removing airport preference list from Library/Preferences/SystemConfiguration
    2. Removing network password from the keychain
    3. Using Keychain first aid
    4. Using disk utility and doing repair disk.
    5. Doing DHCP release in Network Preferences.
    6. Removing my network from the preferred network list and connecting again.
    I am using a D-link modem. It should not be a problem, because the same MBP could remember the password before. The problem happened when I tried to fix my wifi because it would take long to connect after waking from sleep, when I deleted the airport preferences list, and removed the keyring.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Error in debugging ,failed to connect to remote the VM

    Hii,
    iam trying to debug an application,, for that i had created a new configuration and mentioned the details.
    when i debug the application it throwing  a error as
    Excetption occured during launch
    Reason:
    failed to connect to remote VM. connection refused
    can anyone sort it out this issue
    Regards
    satish

    Hi,
    If you are debugging on your local server,then restart the server it should resolve the problem.
    Also make sure before restarting the server that Debug configuration for WD app is Pointing to the Valid J2EE Engine
    Siddharth
    Edited by: Siddharth Jain on Oct 23, 2008 9:41 AM

  • Unix script for checking the user account status

    Hi All,
    i have created one unix script to check the status of the user in diff databases.
    #!/bin/ksh
    useracctreport.txt if [ ! -f hh ];
    then
    echo "Database file does not exist"
    fi
    echo "Enter Username"
    read USER
    echo "Enter the password"
    stty -echo
    read PASS
    stty echo
    for j in `cat users`
    do
    j="`echo $j| tr '[a-z]' '[A-Z]'`"
    for i in `cat hh`
    do
    sqlplus -s $USER/$PASS\@$i <<EOF >> useracctreport.txt
    column USERNAME format a8
    column ACCOUNT_STATUS format a5
    !echo "*****User $j Status in $i DB*****"
    select USERNAME,ACCOUNT_STATUS from dba_users where username=('$j');
    select OBJECT_TYPE,count(*) from dba_objects where owner='$j' group by object_type;
    EOF
    done
    done
    In log file ,i get the below error when its unable to connect to the DB.
    SP2-0306: Invalid option.
    Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] | [INTERNAL]
    where <logon> ::= <username>[<password>][@<connect_string>] | /
    SP2-0306: Invalid option.
    Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] | [INTERNAL]
    where <logon> ::= <username>[<password>][@<connect_string>] | /
    SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Is there any way i can supress this error?
    and is there any other way i can make this script faster.Thanks a lot for your help

    Hi,
    The failing line is
    sqlplus -s $USER/$PASS\@$i <<EOF >> useracctreport.txtYou should test the connect statement you provide to sqlplus. For example:
    CONSTRING=$USER/$PASS\@$i
    echo Connect string used: $CONSTRING
    sqlplus -s $CONSTRING <<EOF >> useracctreport.txtCheck the echoed value. It's malformed. Correct it appropriately.
    Yoann.

  • On the web how can I check the user role to display the form suitable for this role i

    Hello
    How can I check on the web the use role to display the a form for each role
    Example
    If the admin login I display admin_form.fmb and if user login I display
    user_form.fmb
    Thankx
    Tamer

    In my forms I hide tab pages according the role using something like the following script in the WHEN_NEW_FORM_INSTANCE trigger.
    So the user can not navigate to tabs which are vorbiden by his role.
    CURSOR users_roles_cur IS SELECT granted_role FROM user_role_privs
    WHERE username=(SELECT user FROM dual);
    user_roles_rec users_roles_cur%ROWTYPE;
    IF users_roles_cur%ISOPEN
    THEN
    CLOSE users_roles_cur;
    END IF;
    OPEN users_roles_cur;
    LOOP
    FETCH users_roles_cur INTO user_roles_rec;
    EXIT WHEN users_roles_cur%NOTFOUND;
    MESSAGE (user_roles_rec.granted_role);
    PAUSE;
    IF RTRIM(user_roles_rec.granted_role,' ') = 'BLA-BLA'
    THEN
    tb_pg_id := FIND_TAB_PAGE('activity');
    IF GET_TAB_PAGE_PROPERTY(tb_pg_id, visible) = 'FALSE' THEN
    SET_TAB_PAGE_PROPERTY(tb_pg_id, visible, property_true);
    END IF;
    END IF;
    END LOOP;
    CLOSE users_roles_cur;
    Other solution may be is to use an initial form which only will detect the user role and run the appropriate form.
    Other solutions are also possible.
    Joseph

  • Smart Connect - where is the user guide?

    The Sony Smart Connect app is not intuitive, at least not for me and I don't have spare hours to learn it through trial and error.  Is there a detailed user's guide anywhere?  What are the exact definitions of "Condition" and "Action"?  I have my xperia tablet z linked to a Sony speaker SRS-BTX500 and am totally baffled by the Smart Connect screen that shows "Speaker" on the left, then "SRS-BTX500" on the right along with an admonition to "Add condition".  I just want the speaker to turn on when I play Music Unlimited and to turn off when I stop Music Unlimited.  Or do I have this backwards?  

    What Smart Connect does is to automatically perform certain actions (start an app, change settings) that you select under certain conditions (when you connect a certain accessory, at a certain time) that you select.
    If you for example set the conditions "Charger" and "Time 22.00-07.00" and the action "Sound mode: silent" this means that if a charger is connected and time is between 22.00 and 07.00 the tablet will be in silent mode.
    The tablet can unfortunately not turn on/off the power in your speaker for you. If the speaker is on and paired with your tablet it will automatically be used when you play music regardless of Smart Connect. What you could do using Smart Connect is to set the speaker as a condition and Music Unlimited as an Action. What will happen then is that when you power on the speaker and it gets connected Smart Connect will start the app Music Unlimited for you.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • To check the user exit

    Hi,
    I want to debug the user exit EXIT_SAPLIPW1_001.Can anyone tell me how to do this?

    Hi,
    First check if the exit is implemented. There will be an include program inside this Function module. Check if the program is created and activated.
    Then put a break-point in that include and execute the transaction. This will enable you to debug the exit.
    thanks and regards,
    Lakshmi.

Maybe you are looking for